Labor 440
Precision Balances
Standard
Adjusting program (CAL): for quick setting of the balance’s accuracy. External adjusting weight required.
Piece counting: reference quantities selectable. Display can be switched from piece to weight.
Data interface: RS 232 C, bidirectional, for connection of printer or PC.
Net-total weighing: weight of tare-cup and weight of
components memorized in two separate stores.
Percentage determination:
Displays the deviation from the reference weight (100%) in % instead of grammes.
GLP/ISO record keeping
of weighing data with date, time and ident.-no. Only with printers from KERN.
UNIT: Weighing units can be switched to e.g. non-metric units at the touch of a key. See balance model.
Mains adapter: 230 V / 50 Hz. Standard type D, if requested also available in standard GB, AUS or USA.
Option (additonal price)
Accu-supply: rechargeable set.
KERN – Your DKD-Calibration Partner |
Your KERN specialist dealer |
|
issues DKD calibration certificates for balances and test weights in its own accredited laboratories.
It is internationally valid.
KERN is a manufacturer of test weights in the international classes of accuracy
E1, E2, F1, F2, M1, M2, M3, from 1 mg up to 2000 kg DKD = German
Calibration Service
KERN & SOHN GmbH – Balances, Weights, DKD Calibration Laboratory • Ziegelei 1 • 72336 Balingen-Frommern • Tel.: + 49-7433-9933-0 • info@kern-sohn.com • www.kern-sohn.com