KEPCO KIT 219-0525 User Manual

INSTRUCTION SHEET

KEPCO

An ISO 9001 Company.

KIT

FAN REPLACEMENT KIT

1. DESCRIPTION

This kit provides a fan assembly which replaces fan motor, Kepco part number 148-0026. The kit includes a fully assembled
fan motor with fan blade and mounting bracket.

2. MATERIAL SUPPLIED (SEE TABLE 1.)

Table 1 lists the contents of this kit and a description of each component.

TABLE 1. MATERIAL SUPPLIED

ITEM DESCRIPTION

Fan Motor Replaces fan motor, installed on fan mounting bracket 148-0050 1

Fan Mounting Bracket Attaches fan to chassis 128-1864 1

Fan Blade Installed on fan motor shaft 149-0034 1

Instruction Sheet Contains instructions for installing KIT 219-0525 components 228-1623 1

3. FAN REPLACEMENT

1. Tag and disconnect fan wires.

219-0525

KEPCO

PAR T NO.

QUANTITY

2. Remove fan assembly 148-0026 from unit by removing two (2) screws Kepco P/N 101-0132 (8-16 x 3/4.ST, THPH)
(save hardware for reassembly).

3. Install fan assembly from this kit using hardware saved from step 2.

4. Connect fan wires as noted during step 1.

KEPCO, INC. " 131-38 SANFORD AVENUE " FLUSHING, NY. 11352 U.S.A. " TEL [phone] " FAX [phone]

http://www.kepcopower.com " email: [e-mail]

©2007, KEPCO, INC 041107
Data subject to change without notice 228-1623