INSTALLATION GUIDE & OPERATION MANUAL
Lite-Touch™ Portrait
1 , 2 and 3 Burner Ceramic Glass Cooktop
KENYON INTERNATIONAL
P.O. Box 925 |
|
8 Heritage Park Road |
Manual Part # 143409 |
Clinton, CT 06413 USA |
|
Phone: (860) 664 - 4906 |
|
FAX: (860) 664 - 4907 |
|
Website: www.cookwithkenyon.com |
//DC-1/engineering/manuals/B40575_B40576_143409D.pdf |
PLEASE READ THESE INSTRUCTIONS IN THEIR ENTIRETY BEFORE INSTALLATION ANY US OF APPLIANCE.
DO NOT DISCARD
THIS MANUAL.
SAVE FOR FUTURE
REFERENCE.
Contents |
|
|
Page |
Product Specifications |
1 |
INSTALLATION |
|
Package Contents |
2 |
Electrical Requirements |
3 |
Countertop Preparation |
4 |
Installing Cooktop |
5 |
GETTING THE MOST OUT OF YOUR COOKTOP |
|
Cookware |
8 |
Cleaning |
8 |
TOUCH CONTROL COOKING |
|
Control Graphics |
10 |
Energizing Cooking Zone |
11 |
Heat Settings |
11 |
COOKTOP FEATURES |
|
Heat Boost |
12 |
Residual Heat Indicator |
12 |
Automatic Shut-off |
12 |
KENYON® LITE TOUCH™
1 and 2 BURNER TOUCH CONTROL PORTRAIT
SPECIFICATIONS
Three Burner Models:
B40547 240V AC |
Two 6” (165mm) burner @ 1200 watts |
|
One 8” (200mm) burner @1800watts (landscape) |
Overall dimensions: |
30” x 14-1/4” x 3-1/4” |
|
762mm x 362mm x 83mm |
Cutout dimensions: |
29-1/8” x13-3/8” with 1/4” radius |
|
740mm x 340mm with 6mm radius |
Two Burner Models:
B40575 |
120V AC |
Two 6” (165mm) burner @ 1200 watts (portrait) |
B40575L |
120V AC |
Two 6” (165mm) burner @ 1200 watts (landscape) |
B40576 |
240V AC |
Two 6” (165mm) burner @ 1200 watts (portrait) |
B40576L |
240V AC |
Two 6” (165mm) burner @ 1200 watts (landscape) |
Overall dimensions: |
21” x 12” x 3-1/4” |
|
|
|
533mm x 305mm x 83mm |
Cutout dimensions: |
20” x 10 3/4” with 1/4” radius |
|
|
|
508mm x 273mm with 6mm radius |
One Burner Built-In Models: |
|
|
B40571 |
120V AC |
One 6” (165mm) burner @ 1200 watts |
B40572 |
240V AC |
One 6” (165mm) burner @ 1200 watts |
B41573 |
120V AC |
One 6” (165mm) burner @ 1200 watts |
Overall dimensions: |
12 1/2” x 12” x 3-1/4” |
|
|
|
317.5mm x 305mm x 83mm |
Cutout dimensions: |
11 1/2” x 10 3/4” with 1/4” radius |
|
|
|
292mm x 273mm with 6mm radius |
One Burner Portable Models: |
|
|
B41570 |
120V AC |
One 6” (165mm) burner @ 1200 watts |
Overall dimensions: |
12 1/2” x 12” x 5 1/2” |
|
|
|
317.5mm x 305mm x 140mm |
1
KENYON® LITE TOUCH™
1 and 2 BURNER TOUCH CONTROL PORTRAIT
SPECIFICATIONS
IMPORTANT!
Save this document for future reference. ! This appliance must be properly installed and
grounded by a qualified technician.
STEP #1
Unpacking the Cooktop
Carefully unpack the cooktop from its shipping container. If possible, retain the original packaging should the unit ever need to be returned for service.
Verify and identify the package contents. The following items should be included in the carton. If any components are missing or damaged, call KENYON immediately.
Ceramic glass cooktop - (2) Mounting brackets
(1) Package mounting screws - (1) Ceramic cooktop cleaner
*Note model B41570 will not have mounting brackets or screws as it is a portable unit.
Important!
! |
Do not remove the clear film on the |
||
|
|||
|
ceramic glass until cooktop is ready to operate. |
||
|
For future reference, please record the serial number of your cooktop here: |
||
|
|
|
|
2
STEP #2
Check the Electrical Supply Requirements
This product must be installed in accordance with national, state and local electric codes. The following table provides the correct voltage, amperage and frequency that must be supplied to the cooktop.
The supply must be from an individual grounded circuit that is protected by a circuit breaker and rated per the specifications for the various models as shown in the table below.
KENYON |
|
Max Connected |
|
Power Supply |
|
Minimum Wire Size |
||
|
|
|
||||||
Part # |
|
Load |
|
Input |
|
|
|
|
|
|
|
|
|
|
|
|
|
B40575 |
|
2400 Watts |
|
120V AC 20A 60Hz |
|
#12 AWG |
||
B40572 |
|
1200 Watts |
|
120V AC 10A |
60Hz |
|
#12 AWG |
|
B41573 |
|
1200 Watts |
|
120V AC 10A |
60Hz |
|
N/A, Unit equipped w/ GFCI cord |
|
B41570 |
|
1200 Watts |
|
120V AC 10A |
60Hz |
|
N/A, Unit equipped w/ GFCI cord |
|
B40576 |
|
2400 Watts |
|
240V AC 10A 60 Hz |
|
#12 AWG |
|
|
B40571 |
|
1200 Watts |
|
240V AC 5A |
60Hz |
|
#12 AWG |
|
B40547 |
|
4200 Watts |
|
240V AC 17.5A 60Hz |
|
#12 AWG |
||
|
|
|
|
|
|
|
|
|
WARNING
If the electrical supply does not meet the product
! specifications, consult with a licensed electrician before preceeding with installation!
STEP #3 *Note steps 3 thru 5 do not apply to model B41570
Countertop Preparation
Please read this section prior to making cutout for cooktop.
It is important to plan ahead for installation of the cooktop, keeping the following dimensions in mind
(please refer to Figure A).
A - 13 inches maximum depth of overhead cabinets |
|
B - 36 inches is minimum height of countertop above floor |
|
C - The minimum flat countertop surface that the cooktop will rest upon |
|
must be equal to or greater than the overall cooktop dimensions (refer to the |
|
following page for overall cooktop dimensions). |
|
D - 30 inches minimum clearance between the top of the cooking surface |
|
and the bottom of an unprotected wood or metal cabinet or 24 inch minimum |
|
clearance when the bottom of wood or metal cabinet is protected by not less |
|
than 1/4-inch thick flame retardant millboard covered with not less than No. 28 |
|
MSG sheet steel, 0.015-inch thick stainless steel, 0.024-inch thick aluminum |
|
.020-inch thick copper. |
|
E -1 inch minimum from backsplash of coutner top to edge of glass (refer to |
|
the following page for overall cooktop dimensions). 1-1/2 inch minimum from |
|
front of counter to glass. |
Fig. A |
For installations in Canda: “Do not install closer than 1/2-inch |
|
(12mm) from any adjacent surface”. Ne pas installer a’mdins de 12mm |
|
detoute surface adjacente. |
|
3
Loading...