Kenwood KVX-5 User Manual

LCD COLOR MONITOR

KVX-5

INSTRUCTION MANUAL

B60-5141-08 00␣ ␣ JA␣ ␣ (T) 0004

Safety Precautions

Caution: Read this page carefully to ensure safe operation.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

Please read all of the safety and operating instructions before operating this unit. For best
results, follow all warnings placed on the unit and adhere to the operating and use instruc­tions. These safety and operating instructions should be retained for future reference.

1. Power sources — The unit should be connected
to a power supply only of the type described in
the operating instructions or as marked on the
appliance.

2. Power-cord protection — Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the unit.

3. Enclosure removal — Never remove the enclo­sure. If the internal parts are touched acciden­tally, a serious electric shock might occur.

4. Drop — Do not drop the unit or apply strong
shock to it. (Damage due to dropping the unit is
not covered by the warranty.)

5. Ventilation — Avoid hindering the ventilation of
the unit by covering it with a cloth, etc.

6. Abnormal smell — If an abnormal smell or
smoke is detected, immediately turn the power
OFF and pull out the power cord. Contact your
dealer or nearest service center.

7. Heat — Avoid placing the unit under direct sun­light or near a source of heat such as heating
equipment.

8. Temperature — The unit may not function prop­erly if used at extremely low, or freezing tempera­tures. The ideal ambient temperature is above
+5°C (41°F).

9. Water and moisture — The unit should not be
used near water — for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.

10. Dust and moisture — Avoid places where is
dusty or where the humidity is high.

11. Vibrations — Avoid placing the unit on an un­stable place such as a shelf or in a place subject
to vibrations.

12. Magnetic fields — Keep the unit away from
sources of magnetic fields such as TV sets,
speaker systems, radios, motorized toys or mag­netized objects.

13. Handling of the LCD Panel

• Do not scratch the LCD panel, apply a strong
pushing force to it or subject it to strong im­pacts. Doing so could cause damage to the
panel.

• If the LCD panel is broken, do not touch the
liquid inside the panel. If this liquid gets in your
eyes or mouth, or gets on the skin, rinse thor­oughly with water and consult your physician.

14. About the Unit’s Stand

• Do not apply strong force when opening the
stand. Doing so could damage the stand.

• The stand could be damaged if a strong push­ing force is applied to unit when the stand is
in use. Be careful not to apply a strong force
to the unit.

15. Cleaning — Do not use volatile solvents such as
alcohol, paint thinner, gasoline, or benzine, etc.
to clean the cabinet. Use a clean dry cloth.

16. Nonuse periods — The power cord of the unit
should be unplugged from the outlet when left
unused for a long period of time.

17. Damage requiring service — The unit should
be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been

damaged.

B. Objects have fallen, or liquid has been spilled

into the unit.

C. The unit has been exposed to rain.
D. The unit does not appear to operate normally

or exhibits a marked change in performance.

E. The unit has been dropped, or the enclosure

damaged.

18. Servicing — The user should not attempt to
service the unit beyond that described in the
operating instructions. All other servicing should
be referred to qualified service personnel.

CAUTION — TO PREVENT ELECTRIC

19.

SHOCK DO NOT USE THE AC PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.

EN

2

Before Applying Power

Caution: Read this page carefully to ensure safe operation.

AC adaptors are designed for operation as follows.

Europe and U.K. .................................................................. AC 230 V only

Contents

Safety Precautions .......................................... 2

Before Applying Power .................................. 3

Introduction ........................................................... 4

Checking the Accessories ................................... 4

Using the Stand ...................................................4

Connections ........................................................... 5

Connecting the Power Supply (AC adaptor) ........ 5

Connecting AV Equipment .................................. 5

Name and Function of Parts ................................ 6

Setting the Menu .................................................. 7

Selecting Menu Items ......................................... 7

Setting Menu ....................................................... 7

Selecting the Color System (MODE) ................... 8

Setting COLOR/TINT/PICTURE ........................... 8

Initial Resetting ....................................................8

Selecting AV Input ................................................ 9

Adjusting the Sound Volume .............................. 9

Adjusting the Brightness of the Screen ............ 10

Listening to Sounds with Headphones ............ 10

Troubleshooting Problems................................. 11

Specifications ........................................ Back cover

Caution: Read the pages marked carefully to ensure safe operation.

EN

3

Introduction

Keep the packing case for later usage, e.g., protection of your system in transportation for
repair services and so on.

Checking the Accessories

Check the accessories as specified below:

AC adaptor (1 set)

AV cable (1 piece)

Cushion (2 pieces)

Using the Stand

You can incline your system using the stand on the rear when looking at the screen.

Slowly pull out the stand until it stops.
Note: When pulling the stand out, do not apply an excessive force to it. A strong force can

cause stand breakage.

[Placing the system with the stand]

PHONES

Stand

AV1 IN

AV2 IN

DC IN

To make the TV more stable during use

When setting up the stand, make it more stable during use by affixing the cushion supplied
to the bottom of the set.

S

E

N

O

H

P

N

I

1

V

A

IN

2

V

A

N

I

C

D

Front

1 Peel the seals off the double sided tape

affixed to the cushion.

EN

4

2 Affix the cushion to the TV body.