Kenwood KVC-18 User Manual

KVC-18
D.C. Vehicular Charger
COMPATIBILITY
TK-2180/3180 Portables (all models)
TK-5210/5310 Portables (all models)
Charges NiCD & NiMH Only*
GENERAL FEATURES
Heavy Duty D.C.Vehicle Charger
Charge/Trickle/Repeat LED Indicators
Vehicular Man-Out Output
Spring-Tension Charge Well
Portable Safety Strap
KMC-25/26 Compatible
Adjustable Mounting Bracket
* Charges KNB-31A NiCD, KNB-32N / KNB-41NC NiMH only.
Does NOT charge KNB-33L Li-ion packs.
JQA-QMA1205
Technical Specifications
Model KVC-18
GENERAL
Portable Radio Compatibility TK-2180/3180 (all models)
TK-5210/5310 (all models)
Rapid Charge Cycle & Usage 2.5 Hours (Typical)*
* Depends on battery chemistry, capacity, initial charge & temperature
Input Voltage 11.0 to 15.0 VDC Negative Ground
13.8 VDC Nominal, 1.0A Nominal Current Drain 35 mA in Standby Mode Current Charge Rate 1000 mA Rapid Charge (RED LED)
65 mA Trickle Charge (GREEN LED)
Battery Chemistry Charges KNB-31A NiCD, KNB-32N / KNB-41NC NiMH only.
Does NOT charge KNB-33L Li Ion or any other Li Ion packs. Size 3.7"W x 3.7"H x 5.3"D (excluding protrusions) Weight 2 lbs. Operating Temperature -30˚C to +65˚C (-2˚F to +149˚F) Charge Temperature +15˚C to +40˚C (59˚F to +104˚F)
Note: Per most manufacturer specifications,
NiCd cells should not be charged at temperatures
lower than +5˚C and higher than +45˚C. Accessory Connector Pin Outs Pin 1: (RED) – A+ Battery Positive (Pin numbers are molded into the accessory plug) Pin 2: (WHITE) – Repeater Control Output (RPTR ON = active LOW (8 Ω nominal)
Pin 3: N.C.
Pin 4: Yellow Ignition Sense (or tie to A+)
Pin 5: N.C.
Pin 6: (BLACK) – Battery Negative or Chassis Negative Ground Fuse Red A+ lead (2A)
Yellow Ignition Sense (200 mA) Speaker/Microphones: KMC-25, KMC-26 compatible Included Accessories Instruction Sheet, D.C. power cable, adjustable mounting bracket,
2 hex-head bracket-to-charger well screws (hardware to secure the
bracket to a vehicle surface is not included).
ADS#12407 Printed in USA
Loading...