Kenwood KTC-SR901 Owner's Manual

KTC-SR901

SIRIUS SATELLITE RADIO TUNER 3 page 2- 12

INSTRUCTION MANUAL

SINTONIZADOR DE RADIO POR SATÉLITE SIRIUS

3 página 14 - 24

MANUAL DE INSTRUCCIONES

Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new sirius satellite radio tuner.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product. Model KTC-SR901 Serial number

Contents

2 -English

Safety precautions...................................................................3

Operations

Sirius ID [ESN] display .........................................................................................4

Selecting Sirius Mode..........................................................................................4

Switching Seek Mode..........................................................................................4

Selecting the Preset Band ...................................................................................5

Channel Preset Memory......................................................................................5

Preset Tuning .......................................................................................................6

Channel Scan .......................................................................................................6

Channel Search....................................................................................................6

Switching Category..............................................................................................6

Direct Access Tuning ...........................................................................................7

Switching Display.................................................................................................7

Installation

Accessories..........................................................................................................8

Installation Procedure ..........................................................................................8

Connecting Wires to Terminals............................................................................9

Installation..........................................................................................................10

Troubleshooting Guide ..........................................................11

Specifications ........................................................................12

❈ Displays shown in this manual are for descriptive purposes only, and may differ from actual displays.

English- 3

Safety precautions

To prevent injury and/or fire, take the following precautions:

• When extending the battery, or ground wires, make sure to use automotive-grade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating.

• Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts.

•To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.

• Be careful not to drop the unit or subject it to strong shock.

To prevent damage to the machine, take the following precautions:

• Make sure to ground the unit to a negative 12V DC power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

• During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit.

• When drilling a hole in the car to fix the brackets, make sure not to damage the fuel tank, brake tube, wiring harnesses, etc. on the other side.

• If you experience problems during installation, consult your Kenwood dealer.

• If the unit does not seem to be working right, try pressing the reset button on the control unit first. If that does not solve the problem, consult your Kenwood dealer.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

Cleaning the Unit

If the front panel is dirty, wipe it clean with a silicon cloth or soft dry cloth with the power off.

Do not use hard cloths or paint thinner, alcohol, or other volatile solvents. These may damage external surfaces or remove indicator characters.

IMPORTANT INFORMATION

About the disc changer to be connected:

To connect a disc changer having the "O-N" switch to this unit, set the "O-N" switch to "N". To connect a disc changer having no "O-N" switch to this unit, the converter cord CADS100 and/or switching adapter KCA-S210A are required as options.

2CAUTION

NOTE

2CAUTION

2WARNING

What is Sirius Satellite Radio?

4 -English

Operations

Sirius is radio the way it was meant to be: up to 100 new channels of digital quality programming delivered to listeners coast to coast via satellite. That means 60 channels of completely commercial-free music. Plus up to 40 more channels of news, sports, and entertainment from names like CNBC, Discovery, SCI-FI Channel, A&E, House of Blues, NPR, Speedvision and Comedy World.

Sirius is live, dynamic entertainment, completely focused on listeners. Every minute of every day of every week will be different. All 60 commercial-free music channels are created inhouse and hosted by DJs who know and love the music. Do you like Reggae? How about Classic Rock or New Rock? Sirius has an array of

choices spanning a vast range of musical tastes including the hits of the 50’s, 60’s, 70’s, & 80’s as well as Jazz, Country, Blues, Pop, Rap, R&B, Bluegrass, Alternative, Classical, Heavy Metal, Dance and many others…

From its state-of-the-art, digital broadcasting facility in Rockefeller Center, New York City, Sirius will deliver the broadest, deepest mix of radio entertainment from coast to coast.

Sirius will bring you music and entertainment programming that is simply not available on traditional radio in any market across the country. It’s radio like you’ve never heard before. So Get Sirius and Listen Up! For more information, visit siriusradio.com.

There are three kinds of actions (A, B and C) that have different functions depending on Control units to be connected. See the description below to identify which action, A, B or C, your Control unit perform.

A:KDC-X859,KDC-X759,KDC-MP919,

KDC-MPV7019,KDC-MPV619,KDC-X959, KDC-X659,KDC-MP819,KDC-719,KDC-X559

B:KDC-X917,KDC-X817,KDC-9017,

KDC-X717,KDC-V7017,KDC-716S,KRC-535, KRC-435,KDC-519,KDC-X459,KDC-419, KDC-5019,KDC-4019, KDC-319

C:Z828,Z727,Z910DVD

❈:KVT-M700,KVT-911DVD

See each instruction manual for details on the operation of KVT- M700 and KVT- 911DVD.

Select the ESN (Electronic Serial Number) item in MENU of Control unit to display ESN.

Press the [DISP] button repeatedly until ESN mode is displayed.

1Press the [S.A] button to enter the display

control mode.

2Press the [

4] or [¢ ] button to select

the "ESN" display.

3Press the [S.A] button.

Serial & Sirius ID [ESN]

It is especially important to retain the unit serial number and the electronic Sirius Identification number for service activation and potential future service changes.

Press the [SRC] button. Select the "SIRIUS" display.

•You need to subscribe to SIRIUS to receive the service by Sirius Satellite Radio. Consult SIRIUS if ”CALL 888-539 SIRIUS TO SUBSCRIBE”/”CALL 888 539-SIRI” appears.

• It may take a little time to start receiving after you selected the SIRIUS source.

• If the signal receiving fails, ”Acquiring Signal”/”Linking” appears.

•Select the SIRIUS/DAB setting item in MENU for Control unit B, and then set ”SIRIUS ”.

Selecting Sirius Mode

Sirius ID [ESN] display

+ 9 hidden pages