![](/html/14/14b3/14b3e5840ff9e1bfbbfcaf4b54d4745c7c87bfcd889f15fa2a17a2aaa5965653/bg1.png)
HANDHELD CONTROL HEAD INTERFACE KIT
KRK-11
INSTRUCTION MANUAL
Features
This is an optional accessory for the KCH-16.
・
You can connect an external speaker to the interface box.
・
supplied accessories
Item Part Number Quantity
Interface Box
Main body panel assembly
Ground cable E30-3085-XX 1
Retaining band J61-0307-XX 1
Retaining bracket J21-4354-XX 2
Connector E59-0426-XX 1
Screw set N99-2069-XX 1
Screw set N99-2070-XX 1
Instruction manual B62-2102-XX 1
−
−
© B62-2102-00 (M)
Note:
The following instructions are for use by your
◆
authorized
Refer to the Service manual for detailed information regarding the
◆
installation of the KCH-16.
1
1
installation
The following tools and parts are required for installing the handheld
control head interface kit.
Phillips No. 2 screw driver
・
KCT-22 Remote Control Cable
・
Kenwood
KCH-16
External speaker
(Option)
service facility, or the factory.
hanger
Kenwood
dealer, an
Transceiver
Interface box
Main body panel assembly
Ground cable
Screw set : N99-2069-XX
(For Interface box)
Screw set N99-2070-XX
(For Main body panel assembly)
Connector
KCT-18 (Option)
Ignition Sense Cable
KCT-22 (Option)
Interface box
Note:
When connecting the KCH-16 to the Interface box, do not connect
◆
the MIC to the programming connector of the Interface box.
The programming connector of the interface box is dedicated to
◆
programming.
The control connector of the interface box is dedicated to the
◆
KCH-16; do not use this connector for other equipment.
The optional jack is supplied for future expansion. It cannot be used
◆
at this time.
Do not remove the covers or caps of connectors that are not
◆
currently being used.
After connecting the KCH-16 and turning on the power, do not
◆
remove the KCH-16.
Remote Control
Cable
Retaining band Retaining bracket