How it Works
Kenwood
Loading...
KID60B12

Kenwood KID60B12 Installation Instructions Manual

Integrated Dishwasher KID60B12
installation / instructions manual
(Aesthetic door not included.)
contents
unpacking ............................................................................................................................ 5
installation ........................................................................................................................... 6
product overview .............................................................................................................. 13
front view ....................................................................................................................... 13
internal view .................................................................................................................. 13
cutlery basket ................................................................................................................ 13
control panel ﹠ display window ..................................................................................... 14
before operating ............................................................................................................... 15
items not suitable for use in the dishwasher ................................................................. 15
adding detergent or detergent tablet .............................................................................. 16
adding rinse aid ................................................................................................................ 17
adjusting the rinse aid reservoir ..................................................................................... 17
adding salt ..................................................................................................................... 18
loading the dishwasher .................................................................................................... 20
before loading the dishwasher ...................................................................................... 20
adjusting the upper basket ............................................................................................ 21
loading the upper basket for 15 place settings .............................................................. 21
hinged cup rack ............................................................................................................. 22
hinged spikes ................................................................................................................ 23
loading the lower basket for 15 place setting ................................................................ 23
cutlery basket ................................................................................................................ 23
loading the cutlery basket .............................................................................................. 24
wash cycle table ............................................................................................................... 25
starting a wash cycle ....................................................................................................... 26
changing a programme .................................................................................................... 26
at the end of a programme .............................................................................................. 26
switching off the unit ....................................................................................................... 27
unloading the dishwasher ............................................................................................... 27
delay start.......................................................................................................................... 27
half load ............................................................................................................................. 28
cleaning after use ............................................................................................................. 28
the door and the door seal ............................................................................................ 28
the control panel ............................................................................................................ 28
internal care ................................................................................................................... 29
ltering system .............................................................................................................. 29
frost precaution ................................................................................................................ 30
moving the dishwasher.................................................................................................... 30
maintenance for a prolonged period of non-operation ................................................. 30
hints and tips .................................................................................................................... 31
fault code ....................................................................................................................... 31
technical problems ........................................................................................................ 32
disposal of the dishwasher ............................................................................................. 33
disposal of packing material ........................................................................................... 33
specications.................................................................................................................... 34
safety warnings ................................................................................................................ 35
5
This product has been wet tested to ensure correct operation. As a result some water may remain inside the unit. This is normal and safe. Remove any water droplets from the exterior if necessary.
unpacking
Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:
Thank you for purchasing your new Kenwood Dishwasher.
These operating instructions will help you use it properly and safely.
We recommend that you spend some time reading this installation/instruction manual in order that you fully understand all the operational features it offers.
Read all the safety instructions carefully before use and keep this installation/ instruction manual for future reference.
If items are missing or damaged please contact Partmaster (UK only). Tel: 0844 800 3456 for assistance.
the main unit
 tting s.iron for bench X 2
P.N.: 37008517 (Left) 37008516 (Right)
instruction manual x 1
P.N.: 52067948
door template x 1
P.N.: 52014426
 tting screw for wood X 2
P.N.: 37007672
condensation strip X 1
P.N.: 47003240
spring adj.mec hole fl ap X 4
P.N.: 47004105
self-adhesive rubber
stopper X 2
P.N.: 47007525
U-shape hose holder X 1
P.N.: 40020601
self-adhesive rubber spacer X 2
P.N.: 47003262
water supply hose X 1
P.N.: 42005932
cutlery basket
P.N.: 42038590
4x42.5 screws X 6
P.N.: 37007674
4x15 screws X 2
P.N.: 37007673
* All images are for reference only; please refer to your individual unit for actual item.
6
installation
unit in mm
level
level
level
level
600
580
850
30
850
600
620
min.100
80
600
580
850
30
850
600
620
min.100
80
1. Please ensure the dishwasher is installed by a qualified technician. Refer to the tools required (not included).
location
When selecting a position for your freestanding dishwasher you should make sure the installation surface is flat and firm, and the room is well ventilated. Avoid locating your dishwasher near a heat source, eg. cooker, boiler or radiator. Extreme cold ambient temperatures may also cause the appliance not to perform properly. This dishwasher is not designed for use in a garage or outdoor installation.
2. Ensure there is sufficient clearance on each side of the unit to allow slight sideways movement for servicing when required. Good levelling is essential for correct closure and sealing of the door. When the unit is correctly levelled, the door should not catch the inner liner on either side of the cabinet. The adjustable feet may be loosened or tightened in order to obtain the optimum levelling of the unit.
installation
All parts removed must be saved to do the reinstallation in the future. Ensure the dishwasher is unplugged and empty. We recommend that 2 people handle the dishwasher during installation.
The supplied door template also contains installation steps which will assist installation.
* All images are for reference only; please refer to your individual unit for actual item.
7
installation
Failure to attach the condensation strip could result in damage to the underside of your worktop!
4. The condensation strip must be fitted to the underside of the worktop above your dishwasher to help protect it against moisture. Its purpose is to protect your worktop’s underside from steam rising from the dishwasher.
Remove the backing paper from the
condensation strip.
3. Do not connect the unit to the mains socket before installation. Ensure you are not installing the unit right in front of the mains socket. This is to avoid potential damage to the back of the unit.
Ensure the surface is clean prior to sticking the condensation strip to the underside of the worktop.
Leave some space
Stick the Condensation Strip under the worktop, where you want to install the dishwasher.
5. Stick the condensation strip to the underside of the worktop.
* All images are for reference only; please refer to your individual unit for actual item.
8
installation
6. To secure the unit use the 2 brackets as shown. Note their positioning for the different types of worktops.
Wooden Worktop
Synthetic / Ceramic
Worktop
7. Remove the backing from the self-adhesive rubber spacer. Stick 1 x spacer to each side of the dishwasher.
2020
2020
8. Position the dishwasher next to a water tap and a drain. Ensure the water inlet and drain hoses are not kinked or squashed. The unit must not stand on the mains cable.
* All images are for reference only; please refer to your individual unit for actual item.
9
installation
9. Adjust the adjustable feet to obtain the optimum levelling of the unit. The adjustment of the rear feet is via a centre screw at the front.
592-596
<8kg
5555
40
40
10. Tape the supplied door template to the aesthetic door. Ensure the aesthetic door weight is a minimum of 3kg and a maximum of 8kg. Make sure the top of the template is at the top of the door. Drill the required holes following the depth and diameter shown on the door template.
12. Tighten the screws that secure the handle so they are flush with, or beneath, the surface of aesthetic door.
11. Screw the 2 fitting screws in position III. Remove the backing from the self­adhesive rubber stoppers. Stick the stoppers to the aesthetic door.
* All images are for reference only; please refer to your individual unit for actual item.
10
installation
13. Tighten the 3 screws on each side of the unit’s door to secure the aesthetic door.
14. Adjust the bolt to loosen or tighten the tension of the unit’s door.
15. For Wooden Worktops
Tighten the screw into the top bracket to fix
it to the wooden worktop.
For Synthetic / Ceramic Worktops
Tighten the screw into the side
bracket to fix it to the synthetic / ceramic worktop.
* All images are for reference only; please refer to your individual unit for actual item.
11
installation
17. Make sure your plumbing is suitable for use with the dishwasher. If in doubt contact a qualified plumber. This unit MUST BE connected to COLD WATER MAINS using the new water supply hose. OLD HOSE SETS MUST NOT BE RE-USED. The water pressure from the water mains needs to be at a minimum of 0.04 MPa and a maximum of 1.00MPa.
• Connect one end of the water supply
hose to your dishwasher, and then connect the other end of the hose to your water mains. Please ensure the black rubber seal is in place.
• After connecting the hose, turn on your
water mains and check for leaks.
• Connect the dishwasher to the mains
socket.
water mains
Y-Adaptor
(not included)
Connect to another appliance if required.
safety water supply hose
16. Cut out a 600 mm wide slot from the plinth so the unit door can fully open downwards. The depth of the cut out should be sufficient to allow the door to open fully and will depend on the thickness of the panel fitted to the door.
• Do not bend or kink your drain hose.
You may use a Y-adaptor (not included) for an additional water feed for another appliance, for example a washing machine. This is only applicable to the cold water mains. A Y-adaptor is available from most DIY stores.
* All images are for reference only; please refer to your individual unit for actual item.
12
installation
• You may use the U-shaped drain hose holder to secure your drain hose and to avoid bending it.
• Secure the water drain hose to the waste pipe to avoid it coming off during the washing process.
U-shaped drain hose holder
water drain hose
• The waste pipe must only be connected to the foul drains and not the surface water drainage system.
• The water drain hose should be placed between 40 cm and 100 cm from the floor level and must not be extended, otherwise the unit may not be able to expel the waste water properly.
* All images are for reference only; please refer to your individual unit for actual item.
Loading...
+ 26 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use