Kenwood KDC-U7053BTL, KDC-U7053BT User Manual
KDC-U7053BT KDC-U7053BTL
CD-RECEIVER
INSTRUCTION MANUAL
© 2011 JVC KENWOOD Corporation |
B64-4922-00/02 |
Contents
Before use
How to read this manual
Function setting procedure
Component names
Audio adjustments
Audio control
Audio preset memory Audio preset recall
iPod control operation
Music search Alphabet search Related search Direct search Skip search
Skip search ratio setting Playback mode
Music disc/Audio file (CD or USB) operation
Music search
Skip search
Playback mode
Direct music search
Tuner operation
Auto memory
Tuner setting
Direct access tuning
Frequency Step Setting
Display settings
Selecting a display type Selecting a text display Information display setting Illumination color selection Display & Illumination setting
General operation
Adjusting the clock Adjusting the date Dual clock display
Clock & date display type setting Auxiliary input display setting Demonstration mode setting Initial settings
4 |
Registering a Bluetooth device |
22 |
|
5 |
|
About registration of a Bluetooth device |
|
|
Simple Bluetooth device registration |
|
|
|
|
|
|
|
|
Registering a Bluetooth device by operating it |
|
6 |
|
Registering a Bluetooth device by operating this |
|
7 |
|
unit |
|
|
Registering a special Bluetooth device |
|
|
|
|
Simple Bluetooth device selection |
|
|
|
Selecting the Bluetooth device you wish to |
|
|
|
connect |
|
9 |
|
Deleting a registered Bluetooth device |
|
|
Bluetooth device registration test |
|
|
|
Operation for hands-free phoning |
25 |
|
|
|
Receiving a call |
|
|
|
Calling a number in the phone book |
|
|
|
Dialing a number |
|
|
|
Calling a number in the call log |
|
|
|
Speed dialing (Preset dial) |
|
|
|
During a call |
|
12 |
|
Registering in the preset dial number list |
|
|
Call waiting |
|
|
|
|
Clearing the disconnection message |
|
|
|
Making a call by voice dialing |
|
|
|
Display of phone number types (categories) |
|
|
Bluetooth audio device operation |
28 |
|
14 |
|
Before use |
|
|
|
Basic operations |
|
|
|
Playback mode |
|
|
|
Switching between Bluetooth devices |
|
|
Bluetooth setup |
29 |
|
16Registering the PIN code Downloading the phone book Displaying the firmware version Bluetooth detail setting
|
SMS (Short Message Service) |
31 |
|
19 |
|
Displaying the SMS |
|
|
Downloading the SMS |
|
|
|
|
SMS reply setting |
|
|
|
Return message setting |
|
|
|
Creating an original message |
|
Basic operation of remote control |
33 |
General control
On Tuner source
On CD/Audio file source
On iPod source
Hands-free phone control
2 | KDC-U7053BT/ KDC-U7053BTL
Appendix |
34 |
Troubleshooting guide |
36 |
Specifications |
38 |
English | 3
Before use
Before using this unit for the first time
When this unit is first turned on, the interactive menu appears for setting the interface language and demonstration mode. Refer to <Before using this unit for the first time> (page 4) of Quick start guide.
2 WARNING
To prevent injuries or a fire, take the following precautions:
•Stop the car before operating the unit.
•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
¤ CAUTION
•Adjust the volume so that you can hear the sound outside the car. Driving with the volume too high may cause an accident.
•Wipe off the dirt on the panel with a dry silicon or soft cloth.
Failure to observe this precaution may result in damage to the monitor or unit.
Cleaning the connector
The unit may not function properly if the connectors between the unit and faceplate are dirty. Detach the faceplate and clean the connector with a cotton swab gently, being careful not to damage the connector.
Connector
Condensation
When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.
Notes
•If you experience problems during installation, consult your Kenwood dealer.
•When you purchase optional accessories, check with your Kenwood dealer to make sure that they can work with your model and in your area.
•Characters that conform to ISO 8859-1 can be displayed.
•To display characters in the following language, additional setting is required.
KDC-U7053BT
- Chinese
Refer to “Chinese” of <Initial settings> (page 21).
4 | KDC-U7053BT/ KDC-U7053BTL
KDC-U7053BTL
-Arabic
-Persian
-Thai
Refer to “TAG Language” of <Initial settings> (page 21).
•The illustrations of the display and panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the images on the display may be inapplicable.
About the discs used with this
• This unit can only play the CDs with |
. |
•The following discs cannot be used:
-- A discs that is not round
-- A discs with coloring on the recording surface or a disc that is dirty
-- A recordable/rewritable disc that has not been finalized (For the finalization process, refer to the instruction manual that came with your disc writing software or your disc recorder.)
-- An 8 cm (3 inch) disc (An attempt to insert using an adapter can cause malfunction.)
Handling discs
•Do not touch the recording surface of the disc.
•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•Do not use any accessories for the disc.
•Do not use any solvents to clean discs. Use a dry silicon or soft cloth.
•Clean the disc by moving the cloth outward from the center of the disc.
•When removing a disc from this unit, pull it out horizontally.
•If the center hole or outside rim of a disc has burrs, remove them before inserting a disc.
How to reset your unit
If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Reset button
How to read this manual
Function setting procedure
For the procedure for selecting a setting item in the Function setting mode, see the following example:
Example: Adjusting the contrast of the display
1Enter the Function setting mode
Press and hold the Control knob.
“Function” is displayed.
2Select the Contrast function item
Play Mode |
|
|
|
|
|
|
|
|
Settings |
|
|
Clock&Date |
|
|
|
||
|
|
|
|
|||||
|
|
|
|
|
||||
|
|
|
|
|
|
|
||
|
|
|
|
DISP&ILLUMI |
|
|
Display Dimmer |
|
|
|
|
|
|
||||
Initial Settings |
|
|
||||||
|
|
|
|
|||||
|
|
|
|
|
|
Contrast |
||
|
|
|
|
Tuner Settings |
|
|
||
|
|
|
|
|
|
DISP NEGA/POSI |
||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
Turn the Control knob to select “Settings”, and then press the Control knob.
Next, turn the Control knob to select “DISP&ILLUMI”, and then press the Control knob.
Finally, turn the Control knob to select “Contrast”, and then press the Control knob.
In this manual, the above operational procedure is described as follows:
2Select the Contrast function item
Select the following items using the Control knob.
“Settings” > “DISP&ILLUMI” > “Contrast”
Press the [ ] button to return to the previous item.
3Set the Contrast function
Turn the Control knob to select a value (1 - 30), and then press the Control knob.
The previous item is displayed.
4Exit the Function setting mode
Press and hold the [ ] button.
English | 5
Component names
1 234 |
5 |
6 |
W Q |
P |
9 |
8 7 |
1 |
[ ] button |
|
2 |
Release button |
|
3 |
[SRC] button |
|
4 |
Control knob |
|
5 |
[PRESET] button |
|
6 |
[0] button |
|
7 |
USB terminal |
|
8 |
Auxiliary input |
|
9 |
] |
] button |
P [iPod] button
Q [DISP] button
W ] button
6 | KDC-U7053BT/ KDC-U7053BTL
Audio adjustments
Audio control
You can adjust the following audio control items;
Display |
Audio setting item |
Range |
||
“SubWoofer Level” |
Subwoofer level |
–15 — +15 (dB) |
||
“Bass Level” |
Bass level |
–8 — +8 (dB) |
||
“Middle Level” |
Middle level |
–8 — +8 (dB) |
||
“Treble Level” |
Treble level |
–8 — +8 (dB) |
||
“Equalizer PRO” |
|
|
||
|
“Bass Adjust” |
|
|
|
|
|
“Bass Center FRQ” |
Bass Center Frequency |
60/ 80/ 100/ 200 (Hz) |
|
|
“Bass Level” |
Bass level |
–8 — +8 (dB) |
|
|
“Bass Q Factor” |
Bass Q Factor |
1.00/ 1.25/ 1.50/ 2.00 |
|
|
“Bass EXT” |
Bass Extend |
OFF/ ON |
|
“Middle Adjust” |
|
|
|
|
|
“Middle Center |
Middle Center |
0.5/ 1.0/ 1.5/ 2.5 (kHz) |
|
|
FRQ” |
Frequency |
|
|
|
“Middle Level” |
Middle level |
–8 — +8 (dB) |
|
|
“Middle Q Factor” |
Middle Q Factor |
0.75/ 1.00/ 1.25 |
|
“Treble Adjust” |
|
|
|
|
|
“Treble Center |
Treble Center |
10.0/ 12.5/ 15.0/ |
|
|
FRQ” |
Frequency |
17.5 kHz |
|
|
“Treble Level” |
Treble level |
–8 — +8 (dB) |
“Preset Equalizer” |
Preset Equalizer curve |
“Rock”/ “Pops”/ “Easy”/ |
||
|
|
|
|
“Top40”/ “Jazz”/ |
|
|
|
|
”Powerful”/ “Natural”/ |
|
|
|
|
“User”‡ |
“Bass Boost” |
Bass Boost |
“Level1”/ “Level2”/ |
||
|
|
|
|
”Level3”/ “OFF” |
“Loudness” |
Loudness |
“Level1”/ “Level2”/ |
||
|
|
|
|
“OFF” |
“Balance” |
Balance |
Left 15 — Right 15 |
||
“Fader” |
Fader |
Rear 15 — Front 15 |
||
“SubWoofer” |
Subwoofer output |
OFF/ ON |
||
“Detailed Settings” |
|
|
||
|
|
“HPF” |
High Pass Filter |
Through/ 100/ 120/ |
|
|
|
|
150 (Hz) |
|
|
“LPF SubWoofer” |
Low Pass Filter |
85/ 120/ 160/ Through |
|
|
|
|
(Hz) |
|
|
“SubWoofer |
Subwoofer Phase |
Reverse (180°)/ |
|
|
Phase” |
|
Normal (0°) |
|
|
“Supreme” |
Supreme setting |
ON/ OFF |
|
|
“Audio Preset” |
Audio Preset memory† |
Recall/ Memory |
|
|
“Volume Offset” |
Volume offset |
–8 — ±0 (dB) |
|
|
|
|
(AUX: -8 — +8) |
†Refer to <Audio preset memory> (page 8), <Audio preset recall> (page 8).
‡“User”: The customized Bass, Middle, and Treble settings are effective.
⁄
•You can set Bass, Middle, and Treble for each source. About Supreme
Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz).
Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.
The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.
1Select the source to adjust
Press the [SRC] button.
2Enter the Audio control mode
Press the Control knob.
3Select the audio item subject to adjustment
Turn the Control knob to select the audio item subject to adjustment and then press the Control knob.
Press the [ ] button to return to the previous item.
4Adjust the value set for the selected audio item
Turn the Control knob to display the value to adjust, and then press the Control knob.
The previous item is displayed.
5Exit the Audio control mode
Press and hold the [ ] button.
English | 7
Audio adjustments
Audio preset memory
You can register the values set the Audio control items.
1Set the audio control items
Set up the <Audio control> (page 7).
2Enter the Audio control mode
Press the Control knob.
3Select the Audio preset memory mode
Select the following items using the Control knob.
“Detailed Settings” > “Audio Preset”
4Select the Audio preset memory
Turn the Control knob to select “Memory”, and then press the Control knob.
5Determine the selection
Turn the Control knob to select “YES”, and then press the Control knob.
“Memory Completed” is displayed.
6Exit the Audio Control mode
Press and hold the [ ] button.
⁄
•Register a pair of Audio preset memories. You cannot register them by source.
•When you press the [Reset] button, audio control values of all sources will be set to the values registered here.
•The following Audio control items can be registered. “Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”, “Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,
“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF”, “LPF SubWoofer”, “SubWoofer Phase”
Audio preset recall
You can recall the Audio control items registered to the <Audio preset memory> (page 8).
1Select a source
Press the [SRC] button.
2Enter the Audio control mode
Press the Control knob.
3Select the Audio preset memory mode
Select the following items using the Control knob.
“Detailed Settings” > “Audio Preset”
4Select the Audio preset recall
Turn the Control knob to select “Recall”, and then press the Control knob.
5Determine the selection
Turn the Control knob to select “YES”, and then press the Control knob.
“Recall Completed” is displayed.
6Exit the Audio Control mode
Press and hold the [ ] button.
8 | KDC-U7053BT/ KDC-U7053BTL
iPod control operation
For the basic operations to play iPod contents, refer to the Quick Start Guide.
Music search
You can search for the song you want to play.
1Enter the Music search mode
Press the [ 
] button.
“MUSICSEARCH” is displayed.
2Search for a song
|
Operation type |
Operation |
|
|
Movement between items |
Turn the Control knob. |
|
|
Move to the Alphabet |
Press and hold the [ ] button. Refer to |
|
|
search mode |
<Alphabet search> (page 9). |
|
|
Selection of item |
Press the Control knob. |
|
|
Return to previous item |
Press the |
] button. |
|
Return to Top menu |
Push and hold the Control knob leftward. |
|
Canceling the Music search mode |
|||
Press and hold the |
] button. |
||
⁄
•If no characters included in a song name can be displayed, the browse item name and digits are displayed.
Items |
Display |
|
Items |
Display |
Playlists |
“PLIST***” |
|
Podcasts |
“PDCT***” |
Artists |
“ART***” |
|
Genres |
“GEN***” |
Albums |
“ALB***” |
|
Composers |
“COM***” |
Songs |
“PRGM***” |
|
|
|
Alphabet search
You can select an alphabetic character from the list in the browse item (artist, album, etc.) currently selected.
1Enter the Music search mode
Press the [ 
] button.
“MUSICSEARCH” is displayed.
2Enter the Search select mode
Press the [ 
] button.
3Select the Alphabet search mode
Turn the Control knob to select “Alphabet Search”, and then press the Control knob.
4Search for characters
Operation type |
Operation |
Selection of characters |
Turn the Control knob. |
Determination of the selected characters. |
Press the Control knob. |
Return to the Music search mode.
Canceling the Alphabet search mode
Press and hold the [ 
] button.
⁄
•Turning the Control knob fast in the Music search mode allows you to enter the alphabet search mode.
•The time of Alphabet search may become long depending on the number of items (songs) in iPod.
•To search for a character other than A to Z and 1, enter “*”.
•If the first character string begins with an article “a”, “an”, or “the” in the alphabet search mode, it is searched for in defiance of the article.
English | 9
iPod control operation
Related search
You can browse for music of the same artist or genre as the one being played.
1Enter the Search select mode
Press and hold the [ 
] button.
2Select the Related search mode
Turn the Control knob to select “Related Search”, and then press the Control knob.
3Select a desired brows item
Turn the Control knob to select a browse item, and then press the Control knob.
|
Display |
Browse item |
|
|
“Search Artist” |
Displays the album of the same artist. |
|
|
“Search Album” |
Displays music in the album in which the one |
|
|
|
being played is included. |
|
|
“Search Genre” |
Displays the artist of the same genre. |
|
|
“Search Composer” |
Displays the album including music created by the |
|
|
|
same composer. |
|
4 Search for music |
|
||
|
|
|
|
|
Operation type |
|
Operation |
|
Movement between items |
Turn the Control knob. |
|
|
Selection of item |
|
Press the Control knob. |
|
Return to previous item |
Press the [ ] button. |
|
Canceling the Related search mode
Press and hold the [ 
] button.
⁄
•Related search cannot be performed during Podcast playback.
•When the music being played has no information on the browse item or no music was found, “Not Found” is displayed.
Direct search
You can search for music by selecting a browse item and an alphabetic character(s).
1Enter the Music search mode
Press the [ 
] button.
“MUSICSEARCH” is displayed.
2Enter the Search select mode
Press the [ 
] button.
3Select Direct search mode
Turn the Control knob to select “Direct Search”, and then press the Control knob.
10 | KDC-U7053BT/ KDC-U7053BTL
4Select a browse item
Turn the Control knob to select browse item, and then press the Control knob.
Display |
Browse item |
“PLAYLISTS” |
Playlists |
“ARTISTS” |
Artists |
“ALBUMS” |
Albums |
“SONGS” |
Songs |
“PODCASTS” |
Podcasts |
“GENRES” |
Genres |
“COMPOSERS” |
Composers |
5Select the character(s) to be searched for
Turn the Control knob to select a character(s), and then press the Control knob.
You can select up to three characters.
6Search for music
Turn the Control knob to select “DONE”, and then press the Control knob.
A search result list is displayed.
7Select the music
Turn the Control knob to select music, and then press the Control knob.
Canceling the Direct search mode
Press and hold the [ 
] button.
Skip search
You can search for a song by skipping songs at the set skip search ratio (the ratio of the number of songs to skip to the total number of songs in the selected list)
1Enter the Music search mode
Press the [ 
] button.
“MUSICSEARCH” is displayed.
2Enter the Search select mode
Press the [ 
] button.
3Select Skip search mode
Turn the Control knob to select “Skip Search”, and then press the Control knob.
Search for music
Operation type |
Operation |
Movement between items |
Turn the Control knob. |
Skip Search |
Push the Control knob upward or |
|
downward. |
Selection of item |
Press the Control knob. |
Setting of skip search ratio |
Push the Control knob rightward or |
|
leftward. |
Canceling the Music search mode
Press and hold the [ ] button.
⁄
•The skip search ratio is set to 0.5% as default. Refer to <Skip search ratio setting> (page 11).
•Press and hold the Control knob to skip songs at 10% regardless of the setting.
Skip search ratio setting
You can change the ratio of skip performed as mentioned in <Skip search> (page 10).
1Select the iPod source
Press the [SRC] button.
Select the “iPod” display.
2Enter the Function setting mode
Press and hold the Control knob.
3Select the Skip search ratio item
Select the following items using the Control knob.
“Settings” > “Skip Search”
4Set a Skip search ratio
Turn the Control knob to select a ratio (“0.5%”, “1%”, “5%”, or “10%”), and then press the Control knob.
5Exit the Function setting mode
Press and hold the [ ] button.
Playback mode
You can select a Play Mode, such as Random play and Repeat play.
1Select the iPod source
Press the [SRC] button.
Select the “iPod” display.
2Enter the Function setting mode
Press and hold the Control knob.
3Select the Play mode
Turn the Control knob to select “Play Mode”, and then press the Control knob.
4Select a desired playback function
Turn the Control knob to select playback function, and then press the Control knob.
Display |
Description |
|
“Play Mode” |
|
|
|
“APP & iPod |
When set to “ON”, allows you to operate the iPod |
|
Mode” |
with the control on the iPod. |
|
|
“ON” / “OFF” |
“Folder Random” When set to “ON”, plays the songs in the folder randomly. (Music only)
“ON” / “OFF”
|
“All Random” |
When set to “ON”, plays all songs in the iPod |
||
|
|
randomly. (Music only) |
|
|
|
|
“ON” / “OFF” |
|
|
|
“File Repeat” |
When set to “ON”, plays the song repeatedly. |
||
|
|
“ON” / “OFF” |
|
|
|
|
( |
|
: Factory setting) |
5Determine the selection
Press the Control knob.
The previous item is displayed.
6Exit the Function setting mode
Press and hold the [ ] button.
⁄
•When “APP & iPod Mode” is set to “ON”, this unit can control only the “Pause and play”, “Selecting a song”, and “Fast Forward or Fast Backward of the Song” functions.
English | 11
Music disc/Audio file (CD or USB) operation
For the basic operations to play Music disc/Audio file contents, refer to the Quick Start Guide.
Music search
You can select the music you want to listen to from the device or media being played now.
1Enter the Music search mode
Press the [ 
] button.
“MUSICSEARCH” is displayed.
2Search for music
Audio file
Operation type |
Operation |
|
|
Movement between |
Turn the Control knob. |
|
|
folders/files |
|
|
|
Selection of folder/file |
Press the Control knob. |
|
|
Return to previous folder |
Press the [ |
] button. |
|
Return to root folder |
Push and hold the Control knob leftward. |
||
Cancellation of Music |
Press and hold the [ |
] button. |
|
search mode |
|
|
|
¡ indicator: Audio file |
|
|
|
] indicator: Folder |
|
|
|
CD source |
|
|
|
|
|
|
|
Operation type |
Operation |
|
|
Movement between track |
Turn the Control knob. |
|
|
Selection of track |
Press the Control knob. |
|
|
Return to first track |
Push and hold the Control knob leftward. |
||
Cancellation of Music |
Press the [ |
] button. |
|
search mode |
|
|
|
Music Editor media
Skip search
You can search for a song by skipping songs at the set skip search ratio (the ratio of the number of songs to skip to the total number of songs in the selected list).
1Enter the Music search mode
Press the [ 
] button.
“MUSICSEARCH” is displayed.
2Enter the Search select mode
Press the [ 
] button.
3Select the Skip search mode
Turn the Control knob to select “Skip Search”, and then press the Control knob.
4Search for music
Operation type |
Operation |
Movement between items |
Turn the Control knob. |
Skip search |
Push the Control knob upward or |
|
downward. |
Selection of item |
Press the Control knob. |
Setting of skip search ratio |
Push the Control knob rightward or |
|
leftward. |
Canceling the Music search mode
Press and hold the [ ] button.
⁄
•The ratio of the Skip Search is set to 0.5% as default. Refer to <Skip search ratio setting> (page 11).
•Press and hold the Control knob to skip songs at 10% regardless of the setting.
12 | KDC-U7053BT/ KDC-U7053BTL
Loading...