Kenwood KDC-3757URM, KDC-3657UGM, KDC-U4556, KDC-U3556 User Manual

KDC-U4556 KDC-U3556 KDC-3757URM KDC-3657UGM

CD-RECEIVER

INSTRUCTION MANUAL

• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

• iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.

• The “AAC” logo is a trademark of Dolby Laboratories.

• Android is trademark of Google Inc.

CONTENTS BEFORE USE

BEFORE USE 2

BASICS 3

GETTING STARTED 4

RADIO 5

CD / USB / iPod 6

AUX 8

DISPLAY SETTINGS 8

AUDIO SETTINGS 9

MORE INFORMATION 10

TROUBLESHOOTING 10

SPECIFICATIONS 11

INSTALLATION / CONNECTION 12

How to read this manual

• Operations explained mainly using buttons on the faceplate.

•

[XX]

indicates the selected items.

• (➜

XX)

indicates references are available on

the stated page number.

Warning

Do not operate any function that takes your attention away from safe driving.

Caution

Volume setting:

• Adjust the volume so that you can hear sounds outside the car to prevent accident.

• Lower the volume before playing digital sources to avoid damaging the speakers by the sudden increase of the output level.

General:

• Avoid using the USB device or iPod/iPhone if it might hinder driving safety.

• Make sure all important data has been backed up. We shall bear no responsibility for any loss of recorded data.

• Never put or leave any metallic objects (such as coins or metal tools) inside the unit, to prevent a short circuit.

•

If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate.

Remote control (RC-406):

• Do not leave the remote control in hot places such as on the dashboard.

• The Lithium battery is in danger of explosion if replaced incorrectly. Replace it only with the same or equivalent type.

• The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

• Keep battery out of reach of children and in original package until ready to use. Dispose of used batteries promptly. If swallowed, contact a physician immediately.

Maintenance

Cleaning the unit: Wipe off dirt on the faceplate with a dry silicon or soft cloth.

Cleaning the connector: Detach the faceplate and clean the connector with a

cotton swab gently, being careful not to damage the connector.

Handling discs:

• Do not touch the recording surface of the disc.

• Do not stick tape etc. on the disc, or use a disc with tape stuck on it.

• Do not use any accessories for the disc.

• Clean from the center of the disc and move outward.

• Clean the disc with a dry silicon or soft cloth. Do not use any solvents.

• When removing discs from this unit, pull them out horizontally.

• Remove burrs from the center hole and disc edge before inserting a disc.

Connector (on the reverse side of the faceplate)

BASICS

Faceplate

Volume knob

(turn/press) Loading slot

Attach

Detach

Detach button

To Do this (on the faceplate) Do this (on the remote control)

Turn on the power Press L SRC.

Display window

KDC-U4556

KDC-U3556 KDC-3657UGM

• Press and hold to turn off the power.

KDC-3757URM

How to reset

Your preset adjustments will also be erased.

Remote control (RC-406)

(supplied for

KDC-3757URM/ KDC-3657UGM

controlled with an optionally purchased remote control.

* Not used.

How to replace the battery

Press and hold SRC to turn off the power. ( Pressing SRC does not turn on the power. )

KDC-U4556

KDC-U3556

Remote sensor (Do not expose to bright sunlight.)

)

can also be remotely

Pull out the insulation sheet when using for the first time.

Adjust the volume Turn the volume knob. Press VOL

Press ATT during playback to attenuate the sound.

• Press again to cancel.

Select a source Press L SRC repeatedly. Press SRC repeatedly.

Change the display information

Press SCRL DISP repeatedly.

• Press and hold to scroll the current display information.

( not available )

or VOL .

ENGLISH |

GETTING STARTED

Cancel the demonstration

When you turn on the power (or after you reset the unit), the display

shows: “CANCEL DEMO” \ “PRESS” \ “VOLUME KNOB”

1 Press the volume knob.

[YES]

is selected for the initial setup.

2 Press the volume knob again. “DEMO OFF” appears.

Set the clock

1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to select 4 Press the volume knob to select 5 Turn the volume knob to adjust the hour, then press the knob. 6 Turn the volume knob to adjust the minute, then press the knob. Press 4

¢ to move between the hour and minute adjustment.

7 Press and hold to exit.

(or)

Press and hold SCRL DISP to enter clock adjustment mode directly

while in clock display screen.

Then, perform steps 5 and 6 above to set the clock.

[FUNCTION] [SETTINGS] [CLOCK]

[CLOCK ADJ]

, then press the knob.

Set the initial settings

1 Press SRC to enter 2 Press the volume knob to enter 3 Turn the volume knob to select

[STANDBY]

[FUNCTION] [INITIAL SET]

, then press the knob.

4 Turn the volume knob to make a selection (see the table below), then press

the knob.

5 Press and hold to exit.

• To return to the previous hierarchy, press .

PRESET TYPE NORM: Memorizes one station for each preset button in each band (FM1/ FM2/

KEY BEEP

TDF ALARM

RUSSIAN SET

P-OFF WAIT

BUILTIN AUX

CD READ

SWITCH PRE

SP SELECT

F/W UPDATE

F/W UP xx.xx

•

[TDF ALARM]

•

[RUSSIAN SET]

FM3/ MW/ LW/ SW1/ SW2). ; MIX: Memorizes one station for each preset button regardless of the selected band.

ON: Activates the keypress tone. ; OFF: Deactivates.

ON: Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ; OFF: Deactivates.

ON: Folder name, file name, song title, artist name, album name are displayed in

Russian (if applicable). ; OFF: Cancels.

Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.

––– : Cancels ; 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes

ON: Enables AUX in source selection. ; OFF: Disables. (➜ 8)

1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play

as a music CD. No sound can be heard if an audio file disc is played.

(Except for REAR/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier).

OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.

YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). For details on how to update the firmware, see: www.kenwood.com/cs/ce/

is selectable only for

and

KDC-U4556

[P-OFF WAIT]

)

KDC-U4556

is selectable only for

KDC-U3556

KDC-3757URM

KDC-3657UGM

Default:

RADIO

Search for a station

1 Press L SRC to select TUNER. 2 Press repeatedly (or press

FM2/ FM3/ MW/ LW/ SW1/ SW2.

3 Press 4 / ¢ to search for a station.

• To store a station: Press and hold one of the number buttons (1 to 6).

• To select a stored station: Press one of the number buttons (1 to 6)

Change the frequency steps (for

You can change the frequency step of: FM: 50 kHz to 200 kHz MW: 9 kHz to 10 kHz

1 Press and hold L SRC to turn off the power. 2 While pressing number buttons 1 and 5, press L SRC. Release your fingers from the buttons after the display appears.

• To restore the initial setting, repeat the same procedure.

• When the frequency step is changed, the previously stored stations in the memory are deleted.

AM– / #FM+ on RC-406) to select FM1/

KDC-U4556/ KDC-U3556

)

Direct Access Tuning (using RC-406)

1 Press

AM– / #FM+ to select a band.

2 Press DIRECT to enter Direct Access Tuning. “– – – • –” (for FM), “– – – –” (for MW/ LW/ SW1) or “– – – – –” (for SW2) appears on the

display.

3 Press the number buttons to enter a frequency. 4 Press 4 / ¢ (+) to search for a frequency.

• To cancel, press .

• If no operation is done for 10 seconds after step 3, Direct Access Tuning is automatically canceled.

Other settings

1 Press the volume knob to enter 2 Turn the volume knob to select

[FUNCTION] [SETTINGS]

, then press the knob.

3 Turn the volume knob to make a selection (see the table below and on page 6),

then press the knob.

4 Press and hold to exit.

Default:

LOCAL SEEK

SEEK MODE

AUTO MEMORY

ON: Searches only stations with good reception. (For

SW1/ SW2 stations only ; For OFF: Cancels.

Selects the tuning method for the

AUTO1: Automatically searches for a station. ; AUTO2: Searches for a preset station. ; MANUAL: Manually search for a station.

YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels. (Selectable only if [NORM] is selected for [PRESET TYPE].) (➜ 4)

KDC-3757URM

/ ¢ buttons.

KDC-U4556/ KDC-U3556

KDC-3657UGM

: FM stations only.) ;

: MW/

MONO SET

Selectable only when the source is FM. ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.

ENGLISH |

RADIO

Default:

KDC-3757URM

For

PTY SEARCH Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language (ENGLISH/

NEWS SET

AF SET

REGIONAL

ATP SEEK

CLOCK

TIME SYNC

TUNER SET: Selectable only when the source is not TUNER.

TI/ NEWS SET/ AF SET/ REGIONAL/ ATP SEEK: (For details, refer to the table above.)

• Available Program Type:

SPEECH: NEWS, AFFAIRS, INFO

MUSIC: POP M

The unit will search for the Program Type categorized under

• For

CHILDREN, SOCIAL, RELIGION, PHONE IN, TRAVEL, LEISURE, DOCUMENT

COUNTRY, NATION M

KDC-3757URM

or news bulletin, the adjusted volume is memorized automatically. It will be applied the next time traffic information, alarm or news bulletin function is turned on.

KDC-3657UGM

FRENCH/ GERMAN), then press the knob. Selects the available Program Type (see the following), then, press

ON: Allows the unit to temporarily switch to Traffic Information. ; OFF: Cancels.

00M – 90M: Sets the time for receiving the next news bulletin. ; OFF: Cancels.

ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception when the current reception is poor. ; OFF: Cancels.

ON: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.

ON: Automatically searches for a station with better reception when the traffic information’s reception is poor. ; OFF: Cancels.

ON: Synchronizes the unit’s time to the Radio Data System station time. ; OFF: Cancels.

(music),

ROCK M

KDC-3657UGM

Selectable only when the source is FM

(information),

(music),

SPORT, EDUCATE, DRAMA, CULTURE, SCIENCE, VARIED, WEATHER, FINANCE,

EASY M

(music),

OLDIES, FOLK M

: If the volume is adjusted during reception of traffic information, alarm

LIGHT M

(music)

(music),

[SPEECH]

4 / ¢

CLASSICS, OTHER M

[MUSIC]

to start.

(music),

if selected.

JAZZ,

CD / USB / iPod

Start playback

The source changes to CD and playback starts.

USB

USB input terminal

The source changes to USB and playback starts.

iPod/iPhone (for

USB input terminal

KCA-iP102 (optional accessory)

The source changes to iPod and playback starts.

Press and hold iPod to select the control mode while in iPod source.

MODE ON: MODE OFF:

*1 You can still control play/pause, file selection,

From the iPod

From the unit.

fast-forward or reverse files from the unit.

Label side

CA-U1EX (max.: 500 mA) (optional accessory)

KDC-U4556

)

: Eject disc

KDC-U4556

: Applicable

— : Not applicable

To Do this CD USB iPod

Pause or resume

Press 6 38 (or ENT 38 on RC-406).

playback

Select a track/file Press 4 / ¢ (or 4 / ¢ (+) on RC-406).

Select a folder

Press 1 – / 2 + (or

AM– / #FM+ on RC-406).

—

Reverse/Fast-forward Press and hold 4 / ¢ (or 4 / ¢ (+) on RC-406).

Select a track/file from a list

1 Press . 2 Turn the volume knob to make a selection, then press the knob.

• AAC/MP3/WMA file: Select the desired folder, then a file.

• iPod or KENWOOD Music Editor Light (KME Light)/ KENWOOD Music Control (KMC) file ARTISTS, ALBUMS, SONGS, PODCASTS

: Select the desired file from the list (PLAYLISTS,

, GENRES, COMPOSERS

• To return to the root folder (or first file), press number button 5.

• To return to the previous hierarchy, press .

• To cancel, press and hold .

• To skip songs at a specific ratio, press 4 / ¢. (➜

Repeat play Press 4

repeatedly.

*4*

—

• Audio CD: TRAC REPEAT, REPEAT OFF

• AAC/MP3/WMA file: FILE REPEAT, FOLD REPEAT, REPEAT OFF

• iPod or KME Light/ KMC file: FILE REPEAT, REPEAT OFF

Random play Press 3

repeatedly.

• Audio CD: DISC RANDOM, RANDOM OFF

• AAC/MP3/WMA/iPod or KME Light/ KMC file: FOLDER/ FOLD RANDOM, RANDOM OFF

Only for AAC/MP3/WMA files.

Applicable only when

[MODE OFF]

Press and hold 3

is selected.

to select “ALL RANDOM.”

Only for files registered in the database created with KME Light/

KMC. (➜

Only for iPod.

10)

CD / USB / iPod

Direct Music Search (using RC-406)

1 Press DIRECT. 2 Press the number buttons to enter a

track/file number.

3 Press 4 / ¢ (+) to search for music.

• To cancel, press

• Not available if Random Play is selected.

• Not applicable for iPod, KME Light/ KMC file. (➜

10)

Select a song by name (for

While listening to iPod...

1 Press . 2 Turn the volume knob to select a

category, then press the knob.

3 Press again. 4 Turn the volume knob to select the

character to be searched for.

5 Press 4 / ¢ to move to the entry

position.

You can enter up to three characters. 6 Press the volume knob to start

searching.

7 Turn the volume knob to make a

selection, then press the knob.

Repeat step 7 until the desired item is

selected.

• To search for a character other than A to Z and 0 to 9, enter only “ * ”.

• To return to the previous hierarchy, press

• To return to the top menu, press number button 5.

• To cancel, press and hold .

KDC-U4556

ENGLISH |

)

CD / USB / iPod

Set the skip ratio

While listening to iPod (for

Light/ KMC file...

KDC-U4556

1 Press the volume knob to enter 2 Turn the volume knob to select

press the knob.

3 Turn the volume knob to select

then press the knob.

4 Turn the volume knob to make a selection, then

press the knob.

0.5%

(default)/ 1%/ 5%/

when searching for a song.

10%

: Sets the skip ratio

(Holding 4 / ¢ skips songs at 10% regardless

of the setting made.)

5 Press and hold to exit.

Muting upon the reception of a phone call

Connect the MUTE wire to your telephone using a commercial telephone accessory. (➜

When a call comes in, “CALL” appears.

• The audio system pauses.

• To continue listening to the audio system during a call, press SRC. “CALL” disappears and the audio system resumes.

When the call ends, “CALL” disappears.

• The audio system resumes.

) or KME

[FUNCTION] [SETTINGS]

[SKIP SEARCH]

13, 14)

, then

AUX

Preparation:

Select

[ON]

for

[BUILTIN AUX]

Start listening

1 Connect a portable audio player (commercially

available).

Auxiliary input jack

3.5 mm stereo mini plug with “L” shaped connector (commercially available)

2 Press SRC to select AUX. 3 Turn on the portable audio player and start

playback.

Set the AUX name

While listening to AUX... 1 Press the volume knob to enter 2 Turn the volume knob to select

press the knob.

3 Turn the volume knob to select

press the knob.

4 Turn the volume knob to make a selection, then

press the knob.

AUX

(default)/

DVD/ PORTABLE/ GAME/ VIDEO/ TV

5 Press and hold to exit.

. (➜ 4)

Portable audio player

[FUNCTION] [SETTINGS]

[AUX NAME]

, then

DISPLAY SETTINGS

1 Press the volume knob to enter 2 Turn the volume knob to select

press the knob.

3 Turn the volume knob to make a selection (see

the table below), then press the knob.

Repeat step 3 until the desired item is selected or

activated.

4 Press and hold to exit.

• To return to the previous hierarchy, press .

DISPLAY

DISP DIMMER ON: Dims the display illumination. ;

TEXT SCROLL

OFF: Cancels.

AUTO/ ONCE: Selects whether to scroll the

display information automatically, or scroll only once. ; OFF: Cancels.

[FUNCTION]

[SETTINGS]

, then

Default:

AUDIO SETTINGS

While listening to any source... 1 Press the volume knob to enter 2 Turn the volume knob to select 3 Turn the volume knob to make a selection (see the table below), then press

the knob.

Repeat step 3 until the desired item is selected or activated. 4 Press and hold to exit.

• To return to the previous hierarchy, press .

Default: For For For

SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.

BASS LEVEL

MID LEVEL

TRE LEVEL

EQ PRO

BASS ADJUST BASS C FRQ

MID ADJUST MID C FRQ

TRE ADJUST TRE C FRQ

PRESET EQ

KDC-U4556 KDC-U4556

KDC-3757URM

–8 to +8 (+8

–8 to +8 (+2

–8 to +8 (+3

BASS LEVEL

BASS Q FCTR

BASS EXTEND

MID LEVEL

MID Q FCTR

TRE LEVEL

NATURAL

Selects a preset equalizer suitable to the music genre. (Select [USER] to use the customized bass, middle, and treble settings.)

[FUNCTION] [AUDIO CTRL]

KDC-U3556/ KDC-3757URM

KDC-U3556

*1/ 0*2):

*2/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL

, then press the knob.

KDC-3657UGM

: XX*

KDC-3657UGM

Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.)

60/ 80/ 100/ 200: Selects the center frequency.

–8 to +8

1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

0.5K/ 1.0K

frequency.

–8 to +8 (+2

0.75/ 1.00/ 1.25: Adjusts the quality factor.

10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center

frequency.

–8 to +8 (+3

: XX*

(+8*1/ 0*2)

*1: Turns on the extended bass. ; OFF

*2/ 1.5K/ 2.5K

*1/ 0*2): Adjusts the level.

: Adjusts the level.

*1: Selects the center

*2: Cancels.

*1:

BASS BOOST B.BOOST LV1

LOUDNESS

BALANCE

FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.

SUB-W SET ON: Turns on the subwoofer output. ; OFF: Cancels.

DETAIL SET

HPF

LPF SUB-W THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/

SUB-W PHASE REV (180°)/ NORM (0°): Selects the phase of the subwoofer output to

SUPREME SET ON: Creates realistic sound by interpolating the high-frequency

VOL OFFSET (Default: 0)

[ON]

KDC-U4556

is set to

Except for

•

[SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] [SWITCH PRE]

•

[SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE]

bass boost level. ; OFF

LOUD LV1

frequencies boost to produce a well-balanced sound at a low volume level. ; OFF

L15 to R15 (0): Adjusts the left and right speaker output balance.

For

THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/ 150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/

150 Hz are sent to the speakers.

160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz are sent to the subwoofer.

be in line with the speaker output for optimum performance. (Selectable only if a setting other than [THROUGH] is selected for [LPF SUB-W].)

components that are lost in AAC/MP3/WMA audio compression. ; OFF: Cancels. (Selectable only when playing back an AAC/MP3/WMA disc or a USB device, except iPhone/iPod.)

–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume adjustment level of each source. (Before adjustment, select the source you want to adjust.)

[SUB-W]

*1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred

*2: Cancels.

*2/ LOUD LV2: Selects your preferred low and high

*1: Cancels.

KDC-U4556

. (➜ 4)

is selectable only if

[SUB-W SET]

is set

ENGLISH |

+ 19 hidden pages