Kenwood KDC-PSW9521 Owner's Manual

KDC-PSW9521 KDC-M9021 KDC-8021

B64-2218-00 (EY)

COMPACT

DIGITAL AUDIO

INSTRUCTION MANUAL

CD-RECEIVER

— 2 —

English

Contents

Safety precautions......................3

About RDS ..................................5

Notes on playing MP3/WMA.......6

About CDs...................................8

General features .........................9

Power Volume Selecting the Source System Q Audio Control Non-fading Output Faceplate Angle Adjustment Speaker & Woofer Setting Speaker Setting Switching Full Screen Display Switching the Standby Display Switching Upper and Lower Part Display Theft Deterrent Faceplate Hiding the Control Panel TEL Mute

Tuner features ...........................17

Tuning Direct Access Tuning Station Preset Memory Auto Memory Entry Preset Tuning SNPP (Station Name Preset Play)

RDS features.............................20

Traffic Information Radio Text Scroll PTY (Program Type) Program Type preset Changing Language for PTY Function

CD/MP3/WMA/External disc

control features .....................23

Playing CD & MP3/WMA Playing External Disc Fast Forwarding and Reversing Track Search Album Search Direct Track Search Direct Album Search Track Repeat Album Repeat Track/Album Repeat Track Scan Random Play Magazine Random Play Album Select DNPP (Disc Name Preset Play) Disc Naming (DNPS) Text/Title Scroll

Menu system.............................29

Menu System Mask Key Touch Sensor Tone Manual Clock Adjustment Date Adjustment Date Mode Synchronize Clock Selectable Illumination Switching Display Type Switching Upper and Lower Part Display Icon/Spectrum analyzer Select Font Type Select Font Color Select

Dimmer OFF Wait Time Setting System Q Built-in Amp Mute Setting Dual Zone System B.M.S. (Bass Management System) B.M.S. Frequency Offset News Bulletin with Timeout Setting Local Seek Tuning Mode Auto Memory Entry AF (Alternative Frequency) Restricting RDS Region

(Region Restrict Function) Auto TP Seek Monaural Reception Auxiliary Input Display Setting & Disc

Naming Text Scroll Power OFF Timer

Basic Operations of remote......38

Accessories...............................40

Installation Procedure ..............40

Connecting Wires

to Terminals ............................41

Installation ................................42

Removing the Unit....................43

Locking the faceplate

to the unit ..............................43

Troubleshooting Guide .............44

Specifications ...........................49

— 3 —

To prevent injury and/or fire, take the following precautions:

• Insert the unit all the way until it is fully locked in place. Otherwise it may fly out of place during collisions and other jolts.

• When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.75mm

(AWG18) or more to prevent wire deterioration and damage to the wire coating.

• To prevent short circuits, never put or leave any metallic objects (e.g., coins or metal tools) inside the unit.

• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.

• Make sure not to get your fingers caught between the faceplate and the unit.

• Be careful not to drop the unit or subject it to strong shock. The unit may break or crack because it contains glass parts.

2WARNING

To prevent damage to the machine, take the following precautions:

• Make sure to ground the unit to a negative 12V DC power supply.

• Do not open the top or bottom covers of the unit.

• Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

• Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.

• When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

• To prevent short circuits when replacing a fuse, first disconnect the wiring harness.

• Do not place any object between the faceplate and the unit.

• During installation, do not use any screws except for the ones provided. The use of improper screws might result in damage to the main unit.

• Do not apply excessive force to the moving faceplate. Doing so will cause damage or malfunction.

• Do not apply excessive force to the open faceplate or place objects on it. Doing so will cause damage or breakdown.

2CAUTION

IMPORTANT INFORMATION

About the disc changer/CD player to be connected:

To connect a disc changer having the "O-N" switch to this unit, set the "O-N" switch to "N". When you connect a model with no "O-N" switch, the converter cord CA-DS100 available as an option may be required. For details, consult your Kenwood dealer. A disc changer doesn't work when it is connected without using these options. If a model with no "O-N" switch is connected, some unavailable functions and information that cannot be displayed are generated. Note that none of the KDC-C100, KDC-C302, C205, C705, and non-Kenwood CD changers can be connected.

You can damage both your unit and the CD changer if you connect them incorrectly.

Do Not Load 8-cm (3-in.) CDs in the CD slot

If you try to load an 8-cm CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.

Safety precautions

— 4 —

English

• If you experience problems during installation, consult your Kenwood dealer.

• If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed. After you press the reset button, the Mask Key will be needed to restart the unit. If the unit still fails to operate properly after the Reset button has been pressed, contact your local KENWOOD dealer for assistance.

• Press the reset button if the Disc auto changer fails to operate correctly. Normal operation should be restored.

• If you send products in for repair that include a mask key, make sure to present the unit together with the mask key.

NOTE

• The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation.

When using the unit for the first time

In order to deactivate the demonstration mode. Transmit the Mask Key's signal. (page

30)

Lens Fogging

Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

Safety precautions

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off.

Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

Cleaning the CD Slot

As dust can accumulate in the CD slot, clean it occasionally. Your CDs can get scratched if you put them in a dusty CD slot.

Reset button

— 5 —

About RDS

The marking of products using lasers (Except for some areas)

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

CLASS 1 LASER PRODUCT

RDS (Radio Data System)

When listening to an RDS station, the program service name of the station is displayed, advising you quickly which station is being received.

RDS (Radio Data System) stations also transmit alternative frequency data for the same station. When you are making long trips, this function automatically switches to the particular frequency with the best reception for the particular network of stations that you want to listen to. The data is automatically stored, allowing you to switch quickly to another RDS stations, broadcasting the same program, that has better reception. These include stations stored in the station preset memory that you often listen to.

Enhanced Other Network

Stations that offer <Enhanced Other Network> also transmit information about other RDS stations that have traffic information. When you are tuned to a station that is not transmitting traffic information, but another RDS station starts transmitting a traffic bulletin, the tuner automatically switches to the other station for the duration of the bulletin.

Alarm

When an emergency transmission (announcing disasters, etc.) is sent, all current functions are interrupted to allow the warning to be received.

— 6 —

English

Notes on playing MP3/WMA(KDC-PSW9521)/ MP3(KDC-M9021)

This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3)/WMA. Note, however, that the MP3/WMA recording media and formats acceptable are limited. When writing MP3/WMA, pay attention to the following restrictions.

Acceptable media

The MP3/WMA recording media acceptable to this unit are CD-ROM, CD-R, and CD-RW. When using CD-RW, do full format not quick format to prevent malfunction.

Acceptable medium formats

The following formats are available for the media used in this unit. The maximum number of characters used for file name including the delimiter (".") and three-character extension are indicated in parentheses.

• ISO 9660 Level 1 (12 characters)

• ISO 9660 Level 2 (31 characters)

• Joliet (64 characters)

• Romeo (128 characters)

Up to 200 characters can be displayed in the long file name format. For a list of available characters, see the instruction manual of the writing software and the section Entering file and folder names below. The media reproducible on this unit has the following limitations:

• Maximum number of directory levels: 8

• Maximum number of files per folder: 255

• Maximum number of characters for folder name: 64

• Maximum number of folders: 50

MP3/WMA written in the formats other than the above may not be successfully played and their file names or folder names are not properly displayed.

Settings for your MP3/WMA encoder and CD writer

Do the following setting when compressing audio data in WMA data with the WMA encoder.

• Transfer bit rate: 64k —192 kbps

• Sampling frequency: 32k, 44.1k, 48k Hz

When you use your CD writer to record MP3/WMA up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to the maximum capacity at once, check Disc at Once.

Entering ID3 tag and Contents Description

The Displayable ID3 tag is ID3 version 1.x. For the character code, refer to the List of Codes.

Entering file and folder names

The code list characters are the only file names and folder names that can be entered and displayed. If you use any other character for entry, the file and folder names are not displayed correctly. They may neither be displayed correctly depending on the CD writer used. The unit recognizes and plays only those MP3/WMA which have the MP3/WMA extension (.MP3/.WMA).

A file with a name entered with characters not on the code list may not play correctly.

Writing files into a medium

When a medium containing MP3/WMA data is loaded, the unit checks all the data on the medium. If the medium contains a lot of folders or non-MP3/WMA files, therefore, it takes a long time until the unit starts playing MP3/WMA. In addition, it may take time for the unit to move to the next MP3/WMA file or a Track Search or Album Search may not be performed smoothly.

Loading such a medium may produce loud noise to damage the speakers.

• Do no attempt to play a medium containing a non-MP3/WMA

file

with the MP3/WMA extension. The unit mistakes non-MP3/WMA

files for MP3/WMA data as long as

they have the MP3/WMA extension.

• Do not attempt to play a medium containing non MP3/WMA.

— 7 —

MP3/WMA playing order

When selected for play, Album Search, Track Search, or for Album Select, files and folders are accessed in the order in which they were written by the CD writer. Because of this, the order in which they are expected to be played may not match the order in which they are actually played. You may be able to set the order in which MP3/WMA are to be played by writing them onto a medium such as a CD-R with their file names beginning with play sequence numbers such as "01" to "99", depending on your CD writer.

For example, a medium with the following folder/ file hierarchy is subject to Album Search, Track Search, or Album Select as shown below.

When a Track Search is executed with file being played ...

When an Album Search is executed with file being played ...

When Album Select is selected with file being played to move from folder to folder ...

4 Button ¢ Button AM Button FM Button

Operation of the button

Current

folder number

AM Button FM Button

Operation of the button

Current

folder number

Current

file number

4 Button

¢ Button

Operation of the button

Beginning of file

Folder

Example of a medium's folder/file hierarchy

Level 2 Level 4

Level 1 Level 3

File

Root

— 8 —

English

About CDs

Handling CDs

• Don’t touch the recording surface of the CD.

• CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc.

• Don’t stick tape etc. on the CD. Also, don’t use a CD with tape stuck on it.

When using a new CD

If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc.

CD accessories

Don’t use disc type accessories.

CD cleaning

Clean from the center of the disc and move outward.

Removing CDs

When removing CDs from this unit pull them out horizontally.

CDs that can’t be used

• CDs that aren’t round can’t be used.

• CDs with coloring on the recording surface or that are dirty can’t be used.

• Don’t use CDs without disc mark

• A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.)

CD storage

• Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high.

• Store CDs in their cases.

Burrs

Increasing Volume

Turn the [VOL] knob clockwise.

Decreasing Volume

Turn the [VOL] knob counterclockwise.

Volume

Turning ON the Power

Turn the vehicle ignition ON.

The faceplate reverses and control panel is displayed.

Turning OFF the Power

Turn the vehicle ignition OFF.

When the set time for removing the faceplate (page 16) lapses, the faceplate reverses and the control panel is hidden.

Do not apply force to the faceplate during operation. It can cause damage.

The first time the unit is used it is necessary to cancel the Demonstration mode with the Mask key (page 30). If the Demonstration mode isn't canceled, the unit can't be used normally.

Power

General features

— 9 —

KDC-PSW9521

KDC-M9021/ KDC-8021

LOUD indicator

AM/

VOL



¢

SRC MENU

AUD

ANG

IN P/S ATT ST LOUD RDS

1 Select the source for adjustment

Press the [SRC] button.

2 Enter Audio Control mode

Press the [AUD] button for at least 1 second.

3 Select the Audio item for adjustment

Press the [FM] or [AM] button.

Each time the button is pressed the items that can be adjusted switch as shown below.

4 Adjust the Audio item

Press the [4] or [¢] button.

Audio Control

Sound setting Display

Flat "FLAT" User memory "User Preset" Rock "ROCK" Pops "POPS" Easy "EASY" Top 40 "TOP 40" Jazz "JAZZ"

• User memory: The values set on the <Audio control> (page 10).

• Each setting value is changed with the <Speaker setting> (page

12). First, select the speaker type with the Speaker setting.

You can recall the best sound setting preset for different types of the music.

1 Select the source to set

Press the [SRC] button.

2 Select the Sound type

Press the [Q] button.

Each time the button is pressed the sound setting switches.

System Q

Press the [SRC] button.

Source required Display

Tuner "TUNER" CD "COMPACT DISC"/"CD" External disc "DISC-CH"/"DISC" Auxiliary input "AUX" Standby (Illumination only mode) "ALL OFF"

• For Auxiliary input one of the below optional accessories is necessary.

- KCA-S210A

- CA-C1AX

- CD changer with an Auxiliary input function installed.

• This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicles battery. The time until full power OFF can be set in <Power OFF Timer> (page 37).

Selecting the Source

General features

— 10 —

English

Press the [ANG] button for at least 1 second.

Do not apply excessive force to the faceplate. It can cause damage.

Faceplate Angle Adjustment

Function of the KDC-PSW9521/KDC-M9021

Turning the Non-fading output ON or OFF.

Press the [NF] button for at least 1 second.

Each time the button is pressed Non-fading output switches ON or OFF. When it’s ON, "NF ON" is displayed.

Non-fading Output

Adjustment Item Display Range

Bass Center Frequency "Bass FRQ" 60/70/80/100 or 150 Hz Bass level "Bass" –8 — +8 Bass Q Factor "Bass Q" 1.00/1.25/1.50/2.00 Bass Extend "Bass EXT" ON/OFF Middle Center "MID FRQ" 0.5/1.0/1.5/2.0 kHz

Frequency Middle level "MID" –8 — +8 Middle Q Factor "Middle Q" 1.0/2.0 Treble Center Frequency "TRE FRQ" 10.0/12.5/15.0/17.5 kHz Treble level "TRE" –8 — +8 Balance "Balance" Left 15 — Right 15 Fader "Fader" Rear 15 — Front 15 Non-Fading level* "NF Level" –15 — +15 Front High Pass Filter* "HPF Front" Through/40/60/80/100/

120/150/180/220 Hz

Rear High Pass Filter* "HPF Rear" Through/40/60/80/100/

120/150/180/220 Hz

Non-Fading "LPF NF" 50/80/120/Through Hz Low Pass Filter*

Non-Fading Phase* "NF Phase" Normal (0°)/Reverse

(180°) Volume offset "Volume Offset" –8 — ±0 Loudness "LOUD" ON/OFF

• According to the Bass Q Factor setting value, the frequencies that can be set in Bass Center Frequency change as shown below.

Bass Q Factor Bass Center Frequency

1.00/1.25/1.50 60/70/80/100

2.00 60/70/80/150

• When the bass extend is set to ON, low frequency response is extended by 20%.

• Volume offset: Each source's volume can be set as a difference

from the basic volume.

— 11 —

• Loudness: Compensating for low and high tones during low volume. (KDC-PSW9521) The graphic is displayed when Loudness is ON, and is switched OFF when Loudness is OFF.

• * :Function of the KDC-PSW9521/ KDC-M9021

5 Exit Audio Control mode

Press the [AUD] button.

Function of the KDC-8021

Fine-tuning so that the System Q value is optimal when setting the speaker type.

1 Enter Standby

Press the [SRC] button.

Select the "ALL OFF" display.

2 Enter Speaker Setting mode

Press the [Q] button.

"Speaker Setting" is displayed.

3 Select the Speaker type

Press the [4] or [¢] button.

Each time the button is pressed the setting switches as shown below.

Speaker Setting

In Woofer setting mode

Woofer type Display

OFF "Woofer OFF" 12 in. A type "12in type A" 10 in. A type "10in type A" 12 in. B type "12in type B" 10 in. B type "10in type B" 12 in. C type "12in type C" 10 in. C type "10in type C" 8 in. type "8inch" 12 in. D type "12in type D" 10 in. D type "10in type D"

5 Exit Speaker & Woofer Setting mode

Press the [Q] button.

Function of the KDC-PSW9521/KDC-M9021

Speaker setting allows the System Q settings to be fine-tuned according to the type of speakers. Woofer setting allows for Network configuration according to the type of subwoofers.

1 Enter Standby

Press the [SRC] button.

Select the "ALL OFF" display.

2 Enter Speaker & Woofer Setting mode

Press the [Q] button.

"Speaker Setting" is displayed.

3 Select the Setting mode

Press the [FM] or [AM] button.

Each time the button is pressed it switches between Speaker setting mode and Woofer setting mode.

4 Select the Speaker and Woofer type

Press the [4] or [¢] button.

Each time the button is pressed the setting switches as shown below.

In Speaker setting mode

Speaker type Display

OFF "OFF" For 5 & 4 in. speaker "5/4 inch" For 6 & 6x9 in. speaker "6*9/6inch" For the OEM speaker "O.E.M."

Speaker & Woofer Setting

General features

— 12 —

English

Switching the information displayed in Standby.

1 Enter Standby

Press the [SRC] button.

Select the "ALL OFF" display.

2 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

3 Select Display Control mode

Press the [FM] or [AM] button.

Select the "Display Mode Select"/"Disp Mode Select" display.

4 Enter Display Control mode

Press the [4] or [¢] button for at least 1 second.

5 Switch the display

Press the [4] or [¢] button.

Each time the button is pressed the display switches.

Information Display

Demonstration "DEMONSTRATION" Date & Clock "DATE"/"CLOCK" Standby display "ALL OFF"

6 Exit Display Control mode

Press the [MENU] button.

Demonstration can be selected when "Display Type A" or "Display Type C" is selected in <Switching Display Type> (page 32).

Switching the Standby Display

Switching the Full screen display.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select Display Control mode

Press the [FM] or [AM] button.

Select the "Display Mode Select"/"Disp Mode Select" display.

3 Enter Display Control mode

Press the [4] or [¢] button for at least 1 second.

4 Switch the Full screen display

Press the [4] or [¢] button.

Each time the button is pressed the display switches.

Information

Demonstration Spectrum Analyzer 1 Spectrum Analyzer 2 Spectrum Analyzer 3 Graphic 1 (KDC-PSW9521) Spectrum Analyzer 4 (KDC- M9021/ 8021) Graphic 2 (KDC-PSW9521) Spectrum Analyzer 5 (KDC-M9021/ 8021)

Switching Full Screen Display

Speaker type Display

OFF "OFF" For 5 & 4 in. speaker "5/4inch" For 6 & 6x9 in. speaker "6*9/6 inch" For the OEM speaker "O.E.M."

4 Exit Speaker Setting mode

Press the [Q] button.

— 13 —

5 Exit Display Control mode

Press the [MENU] button.

Full Screen display can be selected when "Display Type C" is selected in <Switching Display Type> (page 32).

In CD/ External disc source

Upper Part Display

Information Display

Track Time "P-Time" Disc name "DNPS" Disc title "DISC-TITLE" Track title "TRACK-TITLE"

In Tuner source

Upper Part Display

Information Display

Program Service name or Frequency "BAND+ch+PS" Radio text "R-TEXT"

Lower Part Display

Information Display

Spectrum Analyzer (KDC-PSW9521) "S/ANA" Spectrum Analyzer & Graphic

(KDC- M9021/ 8021)

"S/ANA+GRAPHIC"

Spectrum Analyzer & Clock (KDC- M9021/ 8021 only)

"S/ANA+CLOCK"

Spectrum Analyzer (KDC- M9021/ 8021 only)

"S/ANA"

Radio text "R-TEXT" Date "DATE" Spectrum Analyzer & Clock

(KDC-PSW9521)

"S/ANA+CLOCK"

Clock & Graphic (KDC- M9021/ 8021) "CLOCK+GRAPHIC"

Switching the upper and lower part display.

1 Enter Menu mode

Press the [MENU] button for at least 1 second.

"MENU" is displayed.

2 Select Display Control mode

Press the [FM] or [AM] button.

Select the "Display Mode Select"/"Disp Mode Select" display.

3 Enter Display Control mode

Press the [4] or [¢] button for at least 1 second.

4 Switch the Upper part display

Press the [FM] or [AM] button.

Switch the Lower part display

Press the [4] or [¢] button.

Each time the button is pressed the display switches. The Reference for the display content is after this operation's explanation.

5 Exit Display Control mode

Press the [MENU] button.

• The same information can't be displayed on the Upper part display and lower part display.

• The Upper part display and Lower part display switching can be selected when "Display Type A" is selected in <Display Mode switching> (page 32).

• When "Display Type B" is selected the Lower part display content is clock ON or OFF.

Switching Upper and Lower Part Display

General features

— 14 —

English

Lower Part Display

Information Display

Spectrum Analyzer (KDC-PSW9521) "S/ANA" Spectrum Analyzer & Graphic (KDC- M9021) "S/ANA+GRAPHIC" Spectrum Analyzer & Clock (KDC- M9021 only) "S/ANA+CLOCK" Spectrum Analyzer (KDC- M9021 only) "S/ANA" Album name & Artist name "ALBUM/ARTIST" Song title & Artist name "TITLE/ARTIST" File name "FILE NAME" Folder name "FOLDER NAME" Disc name "DNPS" Date "DATE" Spectrum Analyzer & Clock

(KDC-PSW9521)

"S/ANA+CLOCK"

Clock & Graphic (KDC- M9021) "CLOCK+GRAPHIC"

For Disc name registration refer to <Disc Naming (DNPS)> (page

28).

Function of the KDC-PSW9521/KDC-M9021

In MP3/WMA source

Upper Part Display

Information Display

Track Time "P-Time" Disc name "DNPS" Folder name "FOLDER NAME" File name "FILE NAME" Song title & Artist name "TITLE/ARTIST" Album name & Artist name "ALBUM/ARTIST"

Lower Part Display

Information Display

Spectrum Analyzer (KDC-PSW9521) "S/ANA" Spectrum Analyzer & Graphic

(KDC- M9021/ 8021)

"S/ANA+GRAPHIC"

Spectrum Analyzer & Clock (KDC- M9021/ 8021 only)

"S/ANA+CLOCK"

Spectrum Analyzer (KDC- M9021/ 8021 only)

"S/ANA"

Track Title "TRACK-TITLE" Disc Title "DISC-TITLE" Disc name "DNPS" Date "DATE" Spectrum Analyzer & Clock

(KDC-PSW9521)

"S/ANA+CLOCK"

Clock & Graphic (KDC- M9021/ 8021) "CLOCK+GRAPHIC"

For Disc name registration refer to <Disc Naming (DNPS)> (page

28).

In Auxiliary input source

Lower Part Display

Information Display

Spectrum Analyzer (KDC-PSW9521) "S/ANA" Spectrum Analyzer & Graphic

(KDC- M9021/ 8021)

"S/ANA+GRAPHIC"

Spectrum Analyzer & Clock (KDC- M9021/ 8021 only)

"S/ANA+CLOCK"

Spectrum Analyzer (KDC- M9021/ 8021 only) "S/ANA" Date "DATE" Spectrum Analyzer & Clock (KDC-PSW9521) "S/ANA+CLOCK" Clock & Graphic (KDC- M9021/ 8021) "CLOCK+GRAPHIC"

The Auxiliary input name is always displayed on the Upper part display.

— 15 —

+ 35 hidden pages