Kenwood KDC-6047U, KDC-BT60U User Manual

CD-RECEIVER

KDC-BT60U KDC-6047U

INSTRUCTION MANUAL

The latest version of the Instruction Manual can be downloaded from www. kenwood.com/cs/ce/. Before reading this manual, please access this site to check whether your manual is the latest one.

Before use 4

Component names and functions 6

General operation 7

Before Using Common Operation Menu List Operation

iPod/iPhone Operation 8

Basic Operation Selecting a song by browsing iPod Play Mode iPod Setting Selecting the Search mode Direct Search Related Search Alphabet Search Skip Search My Playlist

USB device Operation 14

Basic Operation File Search Play Mode USB Setting Skip Search Direct Music Search

Music CD/ Audio file Operation 17

Basic Operation Music Search Play Mode Basic Operation of Disc Changer (Optional) Direct Music Search Direct Disc Search

Tuner Operation 20

Basic Operation Tuner Setting Station Preset Memory Auto Memory Entry Preset Tuning Direct Access Tuning PTY (Program Type) Program Type Preset Changing Language for PTY Function

Bluetooth Audio Operation 23

Connecting a Bluetooth Device Basic Operation

Operation of hands-free phoning 24

Connecting a Bluetooth Device Receiving a Call During a Call Call Waiting Other Functions Making a Call Speed Dialing (Preset Dial) Calling a Number in the Phone Book Calling a Number in the Call log Dial a Number Make a Voice Dialing Call Registering to the Preset Dial Number List Display of Phone Number type (category)

Display Settings 28

Basic Operation Display Setting Customization of 5-line Display Mode & 3-line

Display Mode & iPod-like Display Mode Customization of Spectrum Analyzer Display Mode Illumination Color Selection Auxiliary Input Display Setting

Clock and Other Functions 33

Clock and Date Adjustment Initial Settings Demonstration mode Setting Muting volume upon reception of Phone call Theft Deterrent Faceplate

Audio Adjustments 36

Audio Control Preset Equalizer curve Select Manual Equalizer Control Listening Position Selection Listening Position Fine Adjustments Dual Zone System

KDC-BT60U/ KDC-6047U

DSP Setup 40

Car Type Selection Speaker Setting Car Type Fine Adjustments X’Over Setting Audio Preset Memory Audio Preset Recall

Favorite Control 44

Favorite Preset Memory Favorite Preset Recall Favorite Preset Memory Delete

Bluetooth Setup 46

Bluetooth Setting Registering Bluetooth device Registering PIN Code Selecting the Bluetooth device You Wish to

Connect Deleting a Registered Bluetooth device Downloading the Phone Book Adding a Voice Dialing Command Setting a Voice Command for Category

SMS (Short Message Service) 52

Downloading the SMS SMS (Short Message Service)

Basic Operations of remote control 54

Appendix 56

About Audio file iPod/iPhone that can be connected to this unit About USB device About “KENWOOD Music Editor” About the Cell-Phone About the Bluetooth Audio player Menu List Display Indicator items

Accessories/ Installation Procedure 62

Connecting Wires to Terminals 63

Installation/Removing the Unit 65

Troubleshooting Guide 67

Specifications 70

English

Before use

2WARNING To prevent injury or fire, take the following

precautions:

To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

Do not use this unit before canceling Demonstration mode!

This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Demonstration mode

Setting> (page 35).

How to reset your unit

If this unit or the connected unit (auto disc changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.

• Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

Unit and Faceplate Terminals

• To prevent deterioration, do not touch the terminals of the unit and faceplate with your fingers.

• If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth.

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

Notes

• If you experience problems during installation, consult your Kenwood dealer.

• When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.

• Characters that conform to ISO 8859-1 can be displayed.

• Characters that conform to ISO 8859-5 or ISO 8859-1 can be displayed. Set “Russian” of <Initial Settings>

(page 34) to “On”.

• The RDS feature won’t work where the service is not supported by any broadcasting station.

• In this document, the description indicator will light means a status is displayed. Refer to <Basic

Operation> (page 28) for the details of the status

display.

• The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.

KDC-BT60U/ KDC-6047U

Handling CDs

• Do not touch the recording surface of the CD.

• Do not stick tape etc. on the CD, or use a CD with tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move outward.

• When removing CDs from this unit, pull them out horizontally.

• If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc.

CDs that cannot be used

• CDs that are not round cannot be used.

• CDs with coloring on the recording surface or CDs that are dirty cannot be used.

• This unit can only play the CDs with

This unit may not correctly play discs which do not

have the mark.

• You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/ CD-RW recorder instruction manual.)

• 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction.

English

Component names and functions

AUX

Release button

To drop the faceplate down to open and CD can be inserted or ejected (press the button).

[MENU] button

To select a song or set functions. See <Menu List

Operation> (page 7).

[DISP] button

To change display item (press the button).

[VOL] knob

To adjust volume (turn the knob). To select menu list item (turn and press the knob). See

<Menu List Operation> (page 7) for details.

KDC-BT60U : To turn on or off the traffic information function (press the button at least 1 second). KDC-6047U : To make a voice dialing call (press the button at least 1 second).

[SEARCH MODE] button

To enter Search mode (iPod), move between folders (Audio file), etc. For more details, see operations of each source described in page 8 or later.

Microphone (KDC-BT60U)

The microphone for the hands free phone is supplied. When your voice cannot be recognized due to the low microphone volume or noises in the vehicle, adjust the microphone settings by <Bluetooth

Setting> (page 46).

Auxiliary Input Terminal

Portable audio device can be connected with the mini-plug (3.5 mm ø).

• Use the mini-plug cable which is stereo type and does not have any resistance.

[SRC] button

To turn on this unit and select the Source (press the button). To turn off this unit (press the button at least 1 second).

[4] / [¢] buttons

To select station, song and setting items. (press the button).

[38] button

To start or interrupt playback for CD, audio file, and iPod. (press the button). To select the remove mode, and remove the USB device or an iPod (press the button at least 2 seconds).

[ ] button (KDC-BT60U)

To enter Bluetooth mode (press the button). To make a voice dialing call (press the button at least 1 second).

[TI] button (KDC-6047U)

To turn on or off the traf fic information function (press the button). To enter Bluetooth mode (press the button at least 1 second).

Display window

[FAV] button

To recall a registered favorite item (press the button). To register to Favorite (press the button at least 1 second).

USB Terminal

A USB device or an iPod can be connected.

KDC-BT60U/ KDC-6047U

General operation

Before Using

Exit of the Demonstration Mode

Turn off the demonstration mode when you use it for the first time after installation.

Press the [VOL] knob to quit the demonstration mode when the messages “To Cancel Demo Press the Volume Knob” are displayed (approx. 15 seconds).

Turn the [VOL] knob to select “YES” and press the [VOL] knob.

⁄

• Demonstration mode can also be cancelled in “DEMO Mode” of Menu List mode. Refer to <Demonstration mode

Setting> (page 35).

Common Operation

Power and source select

Turns the power ON by pressing the [SRC] button. When the power is ON, select a source.

• SRC Select mode 1: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob.

• SRC Select mode 2: Pressing the [SRC] button each time switches between sources. Tuner (“TUNER”) ➜ Bluetooth Audio (“BT AUDIO”) (KDC-BT60U only) ➜ USB (“USB”) or iPod (“iPod”) ➜ Auxiliary input (“AUX”) ➜ Standby (“STANDBY”) ➜ Tuner...

Keeping pressing the [SRC] button for at least 1 second turns the power OFF.

⁄

• The SRC Select mode can be set in “SRC Select” of <Initial

Settings> (page 34).

• Auxiliary input source is initially set to “OFF”. Set “Built in AUX” described in <Initial Settings> (page 34) to “ON”.

• When an optional accessory is connected, the source name for each device appears.

• When connection of the iPod is recognized, the source display changes from “USB” to “iPod”.

• This unit automatically turns full power OFF after 20 minutes lapses in Standby mode in order to save the vehicle’s battery. The time until full power OFF can be set in “Power OFF Wait” of <Initial Settings> (page 34).

Volume

Turning the [VOL] knob adjusts the sound volume.

Menu List Operation

The basic operating procedure for using this function is described below. The individual function items are covered in the operating procedures.

Select the source

Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.

Function items vary from source to source. For a list of the function items. Refer to <Menu List> (page 58).

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Enter Menu List mode

Press the [MENU] button.

Select the setting item

Turn the [VOL] knob and press it when the desired item is displayed.

Repeat the operation until your desired setup item is selected.

✍ Press the [MENU] button to return to the

previous item.

Operation example:

[VOL] [MENU]

1 3

[VOL] [MENU]

2 4

1 sec.

Music PlayLists My

1 1

 

Artists Albums

…

Play Mode

…

Best25

…

In this manual, the above selection is indicated as

Select “Music”

Make a setting

• When the “

> “Playlists” > “My Best 25”.

” icon is displayed (at the

PUSH

right edge of the display) Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.

• When the “

” icon is not displayed

PUSH

Press the [4] or [¢] button to select a setting value.

Exit Menu List mode

Press the [MENU] button for at least 1 second to return to the first hierarchy. Press the [MENU] button in the first hierarchy to exit the Menu List mode.

⁄

• You cannot set the item with the “ ” icon displayed.

English

iPod/iPhone Operation

SRC4MENU VOL DISP

¢38

SEARCH MODE

/ TI

Basic Operation

Playing iPod

• Connect an iPod

When connected, the source is switched automatically and a song starts playing.

• Select iPod source

Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.

Select the “iPod” display.

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Song Select

Press the [4] or [¢] button.

Fast Forwards or Fast Backwards

Hold down the [4] or [¢] button.

Pause and Play

Press the [38] button to pause or resume playback.

Remove iPod

Press the [38] button for at least 2 seconds.

The unit enters the USB REMOVE mode (“USB REMOVE” is displayed), and the iPod can be removed safely.

Selecting a song by browsing iPod

Display Items

“Music”

“Playlists” Playlists “Artists” Artists “Albums” Albums “Songs” Songs “Podcasts” Podcasts “Genres” Genres “Composers” Composers

Select iPod source

KCA-iP101 (optional accessory) is required to connect an iPod.

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Music”.

Select a song

Operation type Operation

Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. High Speed Search Press the [DISP] or [

scroll up or down by a page. Press the [DISP] or [ at least 1 second to continuously scroll up or down at high speed. Press the button

again to stop scrolling. Return to previous item Press the [MENU] button. Return to Top menu Press the [MENU] button for at least 1

second.

✍ For example: Searching by Artist name.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > “Artists” > Artist name > Album name > Song title

Cancelling Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

] / [TI] button to

] / [TI] button for

⁄

• The unit memorizes the position where you have found a song in the Search mode. When you enter the Menu List mode after searching a song, the memorized position is displayed. Press the [MENU] button for at least 1 second to move to the first hierarchy, select a Menu item, and set it’s parameters.

• Characters which cannot be displayed are left blank. If non of the characters can be displayed, the browse item name and digits are displayed.

Items Display Items Display

Playlists “PLIST***” Podcasts “PDCT***” Artists “ART***” Genres “GEN***” Albums “ALB***” Composers “COM***” Songs “PRGM***”

KDC-BT60U/ KDC-6047U

Play Mode

You can select a Play Mode, such as Random play and Repeat play.

Select iPod source

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Play Mode”.

Select the Play Mode

Turn the [VOL] knob.

Display Overview

“Play Mode”

“iPod by Hand”

“Folder Random”

“All Random”

“File Repeat”

Make a setting

Press the [4] or [¢] button.

Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Remarks

• All Random

• The time required to turn on the all random function may become longer depending on the number of songs in iPod.

• Turning on the all random function changes the iPod browse item to “Songs”. This browse item will not be changed even if the all random function is turned off.

• If the browse item is changed to search for music while the all random function is on, the all random function is turned off and the songs in the browse item are played at random.

• iPod by Hand (iPod Control by Hand Mode)

Allows you to operate iPod with the control on the iPod.

When set to “ON”, allows you to operate iPod with the control on the iPod.

“ON”/ “OFF”

When set to “ON”, plays the music in the folder randomly.

“ON”/ “OFF”

When set to “ON”, plays all songs in iPod randomly.

“ON”/ “OFF”

When set to “ON”, plays the music repeatedly.

“ON”/ “OFF”

( : Factory setting)

⁄

• In the iPod Control by Hand Mode, iPod cannot be operated using this unit.

• This mode is not compatible with music information display. The display will show “iPod by Hand Mode”.

• iPod can be operated when it conforms to the iPod control function.

iPod Setting

You can select following iPod Setting items.

Select iPod source

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”.

Select the setting item

Turn the [VOL] knob and press it when the desired item is displayed.

Display Overview

“Settings”

“Skip Search”

“Delete My Playlist”

Make a setting

• When the “ right edge of the display) Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.

• When the “ Press the [4] or [¢] button to select a setting value.

Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Sets the ratio of skip per formed with <Skip

Search> (page 12).

“0.5%”/ “1%”/ “5%”/ “10%”

Deletes the registered My Playlist. Refer to <Deleting a Song f rom the Playlis t>

(page 12) for t he operation.

“One”/ “All” ➜ “Yes”/ “No”

( : Factory setting)

” icon is displayed (at the

PUSH

” icon is not displayed

PUSH

⁄

• The setting of “Skip Search” in <iPod Setting> (page 9) and that in <USB Setting> (page 15) are always the same. Changing the setting of one reflects the other.

English

iPod/iPhone Operation

Selecting the Search mode

You can select the most suited search method for the desired song from 4 types of the Search mode.

Normal playing

Display Overview

“Direct Search” You can quickly search the desired song by

“Related Search” Searches for music of the same ar tist or genre

“Recall My Playlist” Registers a song to My Playlist and play it. “Delete My Playlist” “Register My P-list”

Browsing

Display Overview

“Direct Search” You can quickly search the desired song by

“Alphabet Search” You can select an alphabetic character from

“Skip Search” The number of songs to be skipped is

“Register My P-list” Registers a song to My Playlist.

Select iPod source

Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.

Select the “iPod” display.

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Enter Search mode

Press the [SEARCH MODE] button.

Select the Search mode

Turn the [VOL] knob.

Start the search mode

Press the [VOL] knob.

Cancelling Search mode

Press the [SEARCH MODE ] button.

specifying its Search item (artist, album, etc.) and initial. Refer to <Direct Search> (page 10).

as the one being played. Refer to the <Related Search> (page 11).

Refer to <My Playlist> (page 12).

specifying its Search item (artist, album, etc.) and initial. Refer to <Direct Search> (page 10).

the list in the Search item (ar tist, album, etc.) selected now. Refer to <Alphabet Search> (page 11).

determined by the ratio of the total number of songs in the list which is selected now. Refer to <Skip Search> (page 12).

Refer to <My Playlist> (page 12).

Direct Search

You can quickly search the desired song by specifying its Search item (artist, album, etc.) and initial.

Select iPod source

Press the [SEARCH MODE] button.

Enter Direct Search mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “Direct Search”.

Select the Search item

Turn the [VOL] knob and press it when the desired Search item is selected.

Display Items

“Music”

“PLAYLISTS” Playlists “ARTISTS” Artists “ALBUMS” Albums

Select the character to be searched for

Operation type Operation

Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. Move to the next column Press the [

Up to 3 characters can be entered.

Determine the selected initial

Turn the [VOL] knob and press it when the desired item is displayed. Select “DONE”.

Start search. When search is completed, the music search mode is selected again at the selected character position. After this step, you need to browse. See step 4 of

<Selecting a song by browsing iPod> (page 8) to

select a song.

Cancelling the Direct Search

Press the [SEARCH MODE] button.

Display Items

“SONGS” Songs “PODCASTS” Podcasts “GENRES” Genres “COMPOSERS” Composers

4] or [¢] button.

⁄

• Characters that can be entered are alphabetical characters (A to Z), numerical characters(0 to 9), and “ * ”.

• “ * ” indicates characters other than alphabetical and numerical characters. You cannot enter any more characters when entering “ * ” in the first character position.

• If the first character string begins with an article “a”, “an”, or “the” in the Direct Search mode, it is searched for in defiance of the article.

KDC-BT60U/ KDC-6047U

Related Search

Searches for music of the same artist or genre as the one being played.

Play the music in iPod

Press the [SEARCH MODE] button.

Enter Related Search mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “Related Search”.

Select the Search item

Turn the [VOL] knob and press it when the desired Search item is selected.

Display Searches music

“Search Artist” Displays the album of the same ar tist. “Search Album” Displays music in the album in which the one

“Search Genre” Displays the artist of the same genre. “Search Composer” Displays the album including music created by the

After this step, you need to browse. See step 4 of

<Selecting a song by browsing iPod> (page 8) to

select a song.

Cancelling the Related Search

Press the [SEARCH MODE] button.

being played is included.

same Composer.

⁄

• Related search cannot be performed while playing the Podcast.

• When the music being played has no information on browsing items or no music was found, “Not Found” is displayed.

Alphabet Search

You can select a song by alphabet. This function searches songs whose name contain the specified character(s) in the list of the selected Search item (artist, album, etc).

Select iPod source

Enter browsing mode

Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > item.

Enter Alphabet Search mode

Press the [SEARCH MODE] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Alphabet Search”.

Search for item

Operation type Operation

Select the character Press the [DISP] or [ Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. Return to previous item Press the [MENU] button. Return to Top menu Press the [MENU] button for at least 1

second.

After this step, you need to browse. See step 4 of

<Selecting a song by browsing iPod> (page 8) to

select a song.

Cancelling the Alphabet Search

Press the [SEARCH MODE] button.

] / [TI] button.

⁄

• The time of search by alphabet may become long depending on the number of songs or items in iPod.

• If the first character string begins with an article “a”, “an”, or “the” in the Alphabet Search mode, it is searched for in defiance of the article.

English

iPod/iPhone Operation

Skip Search

You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position.

Select iPod source

Enter browsing mode

Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > item.

Press the [SEARCH MODE] button.

Enter Skip Search mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “Skip Search”.

Search for item

Operation type Operation

Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. Skip Search Press the [DISP] or [

Sets the ratio of skip performed

Return to previous item Press the [MENU] button. Return to Top menu Press the [MENU] button for at least 1

After this step, you need to browse. See step 4 of

<Selecting a song by browsing iPod> (page 8) to

select a song.

Cancelling the Skip Search

Press the [SEARCH MODE] button.

Keep pressing the button for 3 seconds or longer skips songs at 10% irrespective of the setting.

Press the [

second.

] or [¢] button.

] / [TI] button.

⁄

• Set the ratio with “Skip Search” in <iPod Setting> (page

9).

My Playlist

Allows you to register your favorite songs in the Playlist of this unit. You can register up to 10 songs in the Playlist.

Registering Songs in the Playlist

Play the song you want to register

Press the [SEARCH MODE] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Register My Playlist”

“## STORED (Registration number)” is displayed.

⁄

• Make a Playlist from the songs stored in one iPod. If you attempt to register a song stored in a different iPod, ”No Information” appears and then ”Delete My Playlist” appears. Select “Yes” to delete the Playlist when you want to remake it.

• The song displayed in the Music Search mode can be registered in the same manner. For how to use the music search function, refer to <Selecting a song by browsing

iPod> (page 8).

• If you attempt to register the eleventh song, ”MEMORY FULL” appears and you cannot register it accordingly. To register the song, delete an unnecessary song.

• Do not register Podcasts. Songs you do not want to register may be registered, or playback may not be carried out correctly.

Playing the Song in the Playlist

Press the [SEARCH MODE] button.

Enter My Playlist mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “Recall My Playlist”.

Play the song in the Playlist

Turn the [VOL] knob and press it when the desired item is displayed. Select the song you want to play.

⁄

• Turning ACC OFF or the power OFF cancels the My Playlist mode.

• The ending of a song may be cut unless the song has a silence of 1 second or longer at the end.

• Random play cannot be performed during playback of a song in the Playlist.

Deleting a Song from the Playlist

Press the [SEARCH MODE] button.

KDC-BT60U/ KDC-6047U

Enter Delete Playlist mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “Delete My Playlist”.

Turn the [VOL] knob and press it when the desired item is displayed. Select ”Delete One” or ”Delete All”.

Selecting “Delete All” moves to step 5 and all songs are deleted.

Turn the [VOL] knob and press it when the desired item is displayed. Select the song you want to delete.

Turn the [VOL] knob and press it when the desired item is displayed. Select ”Yes”.

“Complete” is displayed.

⁄

• You can also delete all songs from the Playlist by selecting “Delete My Playlist” described in the section

<iPod Setting> (page 9).

• If you connect the different iPod from one registered to My Playlist, “Delete One” and “Delete All” will not appear and all songs be deleted.

English

USB device Operation

SRC4MENU VOL

¢38

DISP

SEARCH MODE

/ TI

Basic Operation

Playing USB device

• Connect a USB device

When connected, the source is switched automatically and a song starts playing.

• Select USB source

Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.

Select the “USB” display.

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Moving to the next folder

Press the [SEARCH MODE] button.

Song Select

Press the [4] or [¢] button.

Fast Forwards or Fast Backwards

Hold down the [4] or [¢] button.

⁄

• No sound is output while playing audio file.

Pause and Play

Press the [38] button to pause or resume playback.

Remove USB device

Press the [38] button for at least 2 seconds.

The unit enters the USB REMOVE mode (“USB REMOVE” is displayed), and the USB device can be removed safely.

When connecting the USB device, usage of the CA-U1EX (option) is recommended.

File Search

Selecting the file you want to listen to from the device being played now.

USB device

Display Items

“Music” Folder or file name list.

Music Editor media

Display Items

“Music”

“Playlists” Playlists “Artists” Artists “Albums” Albums “Songs” Songs “Genres” Genres

Select USB source

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Music”.

Select a file

Operation type Operation

Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. High Speed Search Press the [DISP] or [

scroll up or down by a page. Press the [DISP] or [ at least 1 second to continuously scroll up or down at high speed. Press the button

again to stop scrolling. Return to previous item Press the [MENU] button. Return to Top menu Press the [MENU] button for at least 1

second.

✍ For example: Searching for ¡".

Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > 1 > 2 > ¡"

] / [TI] button to

] / [TI] button for

KDC-BT60U/ KDC-6047U

¡"

¡!

¡#

Cancelling Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

⁄

• When you search a song in the File Search mode, the unit memorizes the position of the song being played after the search. To set a different Menu item after searching a song, press the [MENU] button for at least 1 second to move to the first hierarchy.

Play Mode

You can select a Play Mode, such as Random play and Repeat play.

Select USB source

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Play Mode”.

Select the Play Mode

Turn the [VOL] knob.

Display Overview

“Play Mode”

“File Scan”

“Folder Random”

“File Repeat”

“Folder Repeat”

Make a setting

Press the [4] or [¢] button.

Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

When set to “ON”, plays the intro of the music in the folder successively.

“ON”/ “OFF”

When set to “ON”, plays the music in the folder randomly.

“ON”/ “OFF”

When set to “ON”, plays the music repeatedly.

“ON”/ “OFF”

When set to “ON”, plays the music in the folder repeatedly.

“ON”/ “OFF”

( : Factory setting)

USB Setting

You can select following USB Setting items.

Select USB source

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”.

Select the setting item

Turn the [VOL] knob and press it when the desired item is displayed.

Display Overview

“Settings”

“Skip Search”

Make a setting

Press the [4] or [¢] button.

Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Sets the ratio of skip per formed with <Skip

Search> (page 12).

“0.5%”/ “1%”/ “5%”/ “10%”

( : Factory setting)

⁄

• The setting of “Skip Search” in <iPod Setting> (page 9) and that in <USB Setting> (page 15) are always the same. Changing the setting of one reflects the other.

English

USB device Operation

Skip Search

You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position.

Select USB source

Enter File Search mode

Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. Select “Music” > item.

Enter Skip Search mode

Press the [SEARCH MODE] button.

Search for music

Operation type Operation

Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. Skip Search Press the [DISP] or [

Sets the ratio of skip performed

Return to previous item Press the [MENU] button. Return to Top menu Press the [MENU] button for at least 1

After this step, see step 4 of <File Search> (page 14) to select a song.

Cancelling the Skip Search

Press the [SEARCH MODE] button.

Keep pressing the button for 3 seconds or longer skips songs at 10% irrespective of the setting.

Press the [

second.

] or [¢] button.

] / [TI] button.

⁄

• This operation is effective only for the files registered in the database created with KENWOOD Music Editor.

• Set the ratio with “Skip Search” in <USB Setting> (page 15).

Function of remote control

Direct Music Search

Searching the music by entering the file number.

Enter Direct Music Search mode

Press the [DIRECT] button on the remote control.

Enter the music number

Press the number buttons on the remote control.

Search the music

Press the [4] or [¢] button.

Cancelling Direct Music Search

Press the [DIRECT]] button.

⁄

• Direct Music Search cannot be performed during playing of “Music Editor” media, Random play, or scan play.

KDC-BT60U/ KDC-6047U

Music CD/ Audio file Operation

Release

SRC / TI

MENU VOL DISP

¢38

SEARCH MODE

Basic Operation

Drop open the faceplate

Press the Release button.

⁄

• Push the faceplate on the left side, and return it to its former position.

Disc play

• A disc inserted.

When inserted, the source is switched automatically and a song is starts playing. When a CD is inserted, the “CD-IN” indicator is ON.

• Select CD source

Press the [SRC] button.Turn the [VOL] knob and press it when the desired item is displayed.

Select the “CD” display.

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Disc ejection

Press the [0] button.

Moving to the next folder

Press the [SEARCH MODE] button.

⁄

• This operation can be performed only for the Audio file.

Song Select

Press the [4] or [¢] button.

Fast Forwards or Fast Backwards

Hold down the [4] or [¢] button.

⁄

• No sound is output while playing audio file.

Pause and Play

Press the [38] button to pause or resume playback.

Function of Internal CD source

Music Search

Selecting the music you want to listen to from the disc being played now.

Display Overview

“Music” Track list (Music CD) / Folder or file name list

Select CD source

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Music”.

Search for music

Operation type Operation

Move between items Turn the [VOL] knob. Select an item Press the [VOL] knob. High Speed Search Press the [DISP] or [

Return to previous item Press the [MENU] button. Return to Top menu Press the [MENU] button for at least 1

Cancelling Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

(Audio file)

scroll up or down by a page. Press the [DISP] or [ at least 1 second to continuously scroll up or down at high speed. Press the button again to stop scrolling.

second.

] / [TI] button to

] / [TI] button for

English

Music CD/ Audio file Operation

Play Mode

You can select a Play Mode, such as Random play and Repeat play.

Select CD source

Enter Menu List mode

Press the [MENU] button.

Turn the [VOL] knob and press it when the desired item is displayed. Select “Play Mode”.

Select the Play Mode

Turn the [VOL] knob.

Music CD source

Display Overview

“Play Mode”

“Track Scan”

“Disc Random”

“Track Repeat”

Audio file source

Display Overview

“Play Mode”

“File Scan”

“Folder Random”

“File Repeat”

“Folder Repeat”

Disc changer source

Display Overview

“Play Mode”

“Track Scan”

“Disc Random”

When set to “ON”, plays the intro of the music on the disc successively.

“ON”/ “OFF”

When set to “ON”, plays the music on the disc randomly.

“ON”/ “OFF”

When set to “ON”, plays the music repeatedly.

“ON”/ “OFF”

( : Factory setting)

When set to “ON”, plays the intro of the music on the disc successively.

“ON”/ “OFF”

When set to “ON”, plays the music on the disc randomly.

“ON”/ “OFF”

When set to “ON”, plays the music repeatedly.

“ON”/ “OFF”

When set to “ON”, plays the music on the disc repeatedly.

“ON”/ “OFF”

( : Factory setting)

When set to “ON”, plays the intro of the music on the disc successively.

“ON”/ “OFF”

When set to “ON”, plays the music on the disc randomly.

“ON”/ “OFF”

“Magazine Random”

“Track Repeat”

“Disc Repeat”

Make a setting

Press the [4] or [¢] button.

Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

When set to “ON”, plays the music in the disc changer randomly.

“ON”/ “OFF”

When set to “ON”, plays the music repeatedly.

“ON”/ “OFF”

When set to “ON”, plays the music on the disc repeatedly.

“ON”/ “OFF”

( : Factory setting)

Basic Operation of Disc Changer (Optional)

Select CD changer source

Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.

Select the “CD CHANGER” display.

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Moving to the next disc

Press the [SEARCH MODE] button.

Song Select

Press the [4] or [¢] button.

Fast Forwards or Fast Backwards

Hold down the [4] or [¢] button.

Pause and Play

Press the [38] button to pause or resume playback.

KDC-BT60U/ KDC-6047U

Function of remote control

Direct Music Search

Searching the music by entering the track number.

Enter Direct Music Search mode

Press the [DIRECT] button on the remote control.

Enter the music number

Press the number buttons on the remote control.

Search the music

Press the [4] or [¢] button.

Cancelling Direct Music Search

Press the [DIRECT] button.

⁄

• Direct Music Search cannot be performed during playing of Random play or scan play.

Function of disc changer with remote control

Direct Disc Search

Searching the disc by entering the disc number.

Enter Direct Disc Search mode

Press the [DIRECT] button on the remote control.

Enter the disc number

Press the number buttons on the remote control.

Search the disc

Press the [FM] or [AM] button.

Cancelling Direct Disc Search

Press the [DIRECT] button.

⁄

• Direct Disc Search cannot be performed during Random play or scan play.

• Input “0” to select disc 10.

English

Tuner Operation

SRC4MENU VOL

Basic Operation

Selecting Tuner source

Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed.

Select the “Tuner” display.

✍ SRC Select mode 2: Pressing the [SRC] button

repeatedly switches source.

Selecting the Receiving Band

Press the [SEARCH MODE] button.

Pressing the button switches the receiving band (FM1, FM2, FM3, AM).

Selecting the Receiving station

Press the [4] or [¢] button.

✍ Details of the station selecting in operation are

set in the “Seek mode” of <Tuner Setting> (page

20).

Traffic information

KDC-BT60U

Press the [VOL] knob for at least 1 second.

KDC-6047U

Press the [ ] / [TI] button.

Turns ON or OFF the Traffic Information function. When the function is set to ON, “TI” indicator is ON. If traffic bulletin starts when the function is ON, “Traffic INFO” is displayed and traffic information is received.

✍ If the volume is adjusted during reception

of traffic information, the adjusted volume is memorized automatically. The memorized volume will be applied next time the Traffic Information function is turned ON.

Tuner Setting

You can select following Tuner Setting items.

Select Tuner source

Enter Menu List mode

Press the [MENU] button.

KDC-BT60U/ KDC-6047U

SEARCH MODE

/ TI

Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings”.

Select the setting item to adjust

Turn the [VOL] knob and press it when the desired item is displayed.

Display Overview

“Settings”

“Local Seek”

“Seek Mode”

“Auto Memory” Memorizes 6 stations with good reception

“Forced MONO”

“News”

“AF”

“RDS Regional”

“Auto TP Seek”

Make a setting

Press the [4] or [¢] button.

Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Remarks

• News (News Bulletin with Timeout Setting)

Automatically receives news bulletin when it starts. Set the time during which interrupt is to be disabled after start of another news bulletin. Changing “News 00min” to “News 90min” turns this function ON. If news bulletin starts when this function is ON, “News” is displayed and news is received. If “20min” is has been set, reception of another news bulletin will not start for 20 minutes. The

Only stations whose reception is good are searched in auto seek tuning.

“OFF”/ “ON”

Selects the tuning mode of the radio.

“Auto1”: Automatic search for a station. “Auto2”: Search in order of the stations in the

Preset memory.

“Manual”: Normal manual tuning control.

automatically. Refer to <Auto Memory Entry> (page 21)

Reduces the noise when stereo broadcasts are received as monaural.

“OFF”/ “ON”

Turns ON/OFF the News Bulletin Automatic Reception function and sets the news bulletin interrupt disabled time.

“OFF”/ “00min” – “90min”

When station reception is poor, automatically switches to the station that is broadcasting the same program over the same RDS network. (AF: Alternative Frequency)

“OFF”/ “ON”

Sets whether to switch to the station only in the specific region using the “AF” control.

“OFF”/ “ON”

When traffic information station reception is poor, automatically searches for a station that can be received better.

“OFF”/ “ON”

( : Factory setting)

news bulletin volume is the same level that was set for Traffic Information.

• Forced MONO

Strong electrical fields (such as from power lines) may cause unstable sound quality when it is set to ON. In such a situation, turn it OFF.

Station Preset Memory

Putting a station in the memory.

Select the radio band and tune in a desired radio station you wish to store in the preset memory

Enter Menu List mode

Press the [MENU] button.

Enter Preset Memory mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “List & Memory”.

Select the number to put in the memory

Turn the [VOL] knob and press it for at least 2 seconds when the desired item is displayed. Select preset number.

Display Overview

“List & Memory”

“-1” Preset number 1. “-2” Preset number 2.

…

“-6” Preset number 6.

Cancelling the Preset Memory mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Auto Memory Entry

Putting stations with good reception in the memory automatically.

Select the radio band you wish to store in the preset memory

Enter Menu List mode

Press the [MENU] button.

Enter Auto Memory Entry mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “Settings” > “Auto Memory”.

Open Auto Memory Entry

Turn the [VOL] knob and press it when the

desired item is displayed. Select “YES”.

When 6 stations that can be received are put in the memory, auto memory entry closes.

Preset Tuning

Recalling the stations in the memory.

Select the radio band

Enter Menu List mode

Press the [MENU] button.

Select a desired station in the memory

Turn the [VOL] knob and press it when the desired item is displayed. Select “List & Memory” > Preset number.

Function of remote control

Direct Access Tuning

Tuning in a desired radio station by entering the frequency.

Select the radio band

Enter Direct Access Tuning mode

Press the [DIRECT] button on the remote control.

“– – – –” is displayed.

Enter the frequency

Press the number buttons on the remote control.

Example:

Desired frequency Press button

92.1 MHz (FM) [9], [2], [1] 810 kHz (AM) [8], [1], [0]

Tune in to the entered frequency

Press the [4] or [¢] button.

Cancelling Direct Access Tuning

Press the [DIRECT] button on the remote control.

⁄

• You can enter the FM band frequency in steps of a minimum of 0.1 MHz.

English

Tuner Operation

PTY (Program Type)

Selecting the Program Type below and searching for a station.

Program Type Display

Speech “Speech”

Music “Music”

News “News” Current Affairs “Affairs” Information “Info” Sport “Sport” Education “Educate” Drama “Drama” Culture “Culture” Science “Science” Varied “Varied”

Pop Music “Pop M” Rock Music “Rock M” Easy Listening

Music Light Classical “Light M”

• Speech and Music include the Program type shown below. Speech: Items in the white letters. Music: Items in the black letters.

Select the FM band

Press the [SEARCH MODE] button. Select “FM1”, “FM2”, or “FM3”.

Enter Menu List mode

Press the [MENU] button.

Enter PTY mode

Turn the [VOL] knob and press it when the desired item is displayed. Select “PTY Search”.

Select the Program Type

Turn the [VOL] knob.

Search for the selected Program Type station

Press the [4] or [¢] button.

Exit PTY mode

Press the [MENU] button.

“Easy M”

Program Type Display

Serious Classical “Classics” Other Music “Other M”

Weather “Weather” Finance “Finance” Children’s programs “Children” Social Affairs “Social” Religion “Religion” Phone In “Phone In” Travel “Travel” Leisure “Leisure”

Jazz Music “Jazz ” Country Music “Country” National Music “Nation M” Oldies Music “Oldies” Folk Music “Folk M”

Documentary “Document”

⁄

• This function cannot be used during a traffic bulletin or AM reception.

• When the selected Program Type is not found, “No PTY” is displayed. Select another Program Type.

• The operation ends automatically if you do not operate within 30 seconds.

Program Type Preset

Putting the Program Type in the Preset button memory and quick recall.

Presetting the Program Type

Select the Program Type to preset

Refer to <PTY (Program Type)> (page 22).

Enter Program Type Preset mode

Press the [SEARCH MODE] button.

Select the number to put in the memory

Turn the [VOL] knob and press it for at least 2 seconds when the desired item is displayed. Select preset number.

Recalling the preset Program Type

Enter PTY mode

Refer to <PTY (Program Type)> (page 22).

Enter Program Type Preset mode

Press the [SEARCH MODE] button.

Select a desired Program Type in the memory

Turn the [VOL] knob and press it when the desired item is displayed. Select preset number.

Changing Language for PTY Function

Selecting the Program Type display language as follows.

Language Display

English “English” Spanish “Spanish” French “French” Dutch “Dutch”

Enter PTY mode

Refer to <PTY (Program Type)> (page 22).

Enter Changing Language mode

Press the [VOL] button.

Select the language

Turn the [VOL] knob and press it when the desired item is displayed. Select a language.

Language Display

Norwegian “Norwegian” Portuguese “Portuguese” Swedish “Swedish” German “German”

KDC-BT60U/ KDC-6047U

+ 50 hidden pages

Kenwood KDC-6047U, KDC-BT60U User Manual

Contents

Before use

Component names and functions

General operation

Before Using

Common Operation

Menu List Operation

iPod/iPhone Operation

Basic Operation

Selecting a song by browsing iPod

Play Mode

iPod Setting

Selecting the Search mode

Direct Search

Related Search

Alphabet Search

Skip Search

My Playlist

USB device Operation

Basic Operation

File Search

Play Mode

USB Setting

Skip Search

Direct Music Search

Music CD/ Audio file Operation

Basic Operation

Music Search

Play Mode

Basic Operation of Disc Changer (Optional)

Direct Music Search

Direct Disc Search

Tuner Operation

Basic Operation

Tuner Setting

Station Preset Memory

Auto Memory Entry

Preset Tuning

Direct Access Tuning

PTY (Program Type)

Program Type Preset

Changing Language for PTY Function