Kenwood KDC-4051UR, KDC-4451UQ, KDC-4651URY, KDC-4051UG, KDC-4551UB User Manual

...

“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect

130.com.ua

Autogood products Internet store “130”

specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and

other countries.

KDC-4051UG KDC-4051UR KDC-4051URY KDC-415UA KDC-415UR KDC-4251URY KDC-4451UQ KDC-4551UB KDC-455UW KDC-4651URY

CD-RECEIVER

INSTRUCTION MANUAL

CD-RECEIVER

BEDIENUNGSANLEITUNG

РAДИОПРИЕMНИК С KOMПAKT–ДИСKAMИ

ИHCTPУKЦИЯ ПO ЭKCПЛУATAЦИИ

АВТОМАГНІТОЛА

ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ

The “AAC” logo is a trademark of Dolby Laboratories.

This symbol mark indicates that Kenwood manufactured this product so as to decrease harmful influence on the environment.

Изделие изготовлено в Индонезии

CONTENTS

130.com.ua

Autogood products Internet store “130”

Safety 2 Preparation 4

How to attach/detach the faceplate How to reset your unit Initial settings before operations

Basic operations 5 Getting started 7

Canceling the display demonstration Setting the demonstration mode Adjusting the clock

Listening to the radio 8

Adjust [SETTINGS] mode settings

Listening to the other external components Listening to a disc/ USB device/ iPod 10

Start playing a disc

Functions of KDC-4651URY with remote controller

(RC-405)

Direct Music Search Connecting a USB device Connecting an iPod

KDC-4651URY only)

Selecting Repeat Play Selecting Random Play Selecting Scan Play Selecting a folder/track/file

Functions of KDC-4551UB/ KDC-455UW/

KDC-4651URY with iPod

Alphabet Search and My Playlist for iPod iPod control by Hand Mode Adjust [SETTINGS] mode settings

(KDC-4551UB/ KDC-455UW/

Function settings 13 Using the remote controller (RC-405) 15

Equipped for

KDC-4651URY

Troubleshooting 16 Installation/connection 17

Basic procedure Warning Caution Wiring connection Installing the unit Removing the unit

Specifications 21

Safety

WARNING

Stop the car before operating the unit.

Important to know...

To prevent a short circuit, never put or

leave any metallic objects (such as coins or metal tools) inside the unit.

Caution: Adjust the volume so that you

can hear sounds outside the car. Driving with the volume too high may cause an accident.

Condensation: When the car is air-

conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.

This unit can only play the CDs with:

The illustrations in this manual are

examples used to explain more clearly how the controls are used. Therefore, what appears on the illustrations may differ from what appears on the actual equipment.

A USB connection cable, CA-U1EX (optional

accessory) is required for connecting a USB device.

You can connect an Apple iPod/iPhone

with

KDC-4551UB/ KDC-455UW/ KDC-4651URY

The word “iPod” appearing in this manual

indicates the iPod or iPhone connected to this unit with a connection cable, KCA-iP101 (optional accessory).

If you experience problems during

installation, consult your Kenwood dealer.

When you purchase external components,

check with your Kenwood dealer to make sure that they work with your model and in your area.

Detailed information and notes about the

playable audio files are stated in an online manual on the following site: www.kenwood.com/cs/ce/audiofile/

Declaration of Conformity with regard to

130.com.ua

Autogood products Internet store “130”

the EMC Directive 2004/108/EC

Manufacturer:

Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan

EU Representative’s:

Kenwood Electronics Europe BV Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands

This Product is not installed by the manufacturer of a vehicle on the production line, nor by the professional importer of a vehicle into an EU Member State.

Information on Disposal of Old Electrical and Electronic Equipment and Batteries (applicable for EU countries that have adopted separate waste collection systems)

Products and batteries with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment and batteries should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. Notice: The sign “Pb” below the

symbol for batteries indicates that this battery contains lead.

The marking of products using lasers

ENGLISH

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

For Turkey

Bu ürün 26891sayılı Resmi Gazete’de yayımlanan Elektrikli ve Elektronik Eşyalarda Bazı Zararlı Maddelerin Kullanımının Sınırlandırılmasına Dair Yönetmeliğe uygun olarak üretilmiştir.

This product complies with Directive, Number 26891 regarding “REGULATION ON THE RESTRICTION OF THE USE OF CERTAIN HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT”.

Muting upon the reception of a phone call

To use this feature, connect the MUTE lead to your telephone using a commercial telephone accessory. (page 18, 19)

When a call comes in, “CALL” appears.

The audio system pauses. To continue listen to the audio system

during a call, press SRC. “CALL” disappear and the audio system resumes.

When a call ends, “CALL” disappear.

The audio system resumes.

Preparation

130.com.ua

Autogood products Internet store “130”

How to attach/detach the faceplate

Do not expose the faceplate to direct

sunlight, excessive heat, or humidity. Also avoid places with too much dust or the possibility of water splashing.

Keep the faceplate in its casing while

detached.

The faceplate is a precision piece of

equipment and can be damaged by shocks or jolts.

To prevent deterioration, do not touch the

terminals of the unit and faceplate with your fingers.

Item Selectable setting (Preset: *)

PRESET TYPE NORMAL/ NORM *: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/ MW/

KEY BEEP ON */ OFF: Activates/deactivates the keypress tone. RUSSIAN SET ON: Folder name, file name, song title, artist name, album name are displayed in Russian (if applicable). ;

P-OFF WAIT Sets the duration when the unit will automatically turns off (while in standby mode) to save the battery.

BUILT-IN AUX/ BUILTIN AUX

CD READ 1 *: Automatically distinguishes between audio file disc and music CD. ; 2:

SWITCH PREOUT/ SWITCH PRE

SP SELECT OFF */ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance. F/W UP xx.xx YES: Starts upgrading the firmware. ; NO *:

[SWITCH PREOUT/ SWITCH PRE] is selectable only with KDC-4051UG/ KDC-4051UR/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4551UB/ KDC-455UW/ KDC-4651URY.

LW). ; MIX: Memorizes one station for each preset button regardless of the selected band (FM1/ FM2/ FM3/ MW/ LW).

OFF *: Cancels.

–––– : Cancels ; 20M *: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ON1 *: Outputs sound of the connected external component through the car speakers when “AUX” is

selected as the source. ; ON2: Outputs sound from the connected external component when “AUX” is selected as the source. When you turn on the power, the sound attenuates (to prevent noise when no external component is connected). Turn the volume knob clockwise to return to the previous volume level. ; OFF: Disables “AUX” in source selection.

sound can be heard if an audio file disc is played. REAR */ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on

the rear of the unit (through an external amplifier).

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

How to reset your unit

If this unit fails to operate properly, press the reset button.

The unit returns to factory settings when the reset button is pressed.

Reset button

Initial settings before operations

Press SRC to enter [STANDBY] mode.

Press the volume knob to enter [FUNCTION] mode.

Turn the volume knob to select [INITIAL SET], then press to enter.

Turn the volume knob to make a selection, then press to confirm.

See table below for selection.

Hold to finish the procedure.

Forces to play as a music CD. No

Cancels (upgrading is not activated).

Basic operations

130.com.ua

Autogood products Internet store “130”

Display window

KDC-4551UB/ KDC-455UW/ KDC-4651URY:

KDC-4051UG/ KDC-4051UR/ KDC-4051URY/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4451UQ:

ENGLISH

Volume knob

Detaches the faceplate

The illustration and button names used for explanation in this manual are of

KDC-455UW/ KDC-4651URY

otherwise).

Refer to the table below for the difference:

KDC-4551UB/ KDC-455UW/ KDC-4651URY

iPod

3 (ALL RDM) 3

(MEMO MY LIST)

(unless mentioned

KDC-4051UG/ KDC-4051UR/ KDC-4051URY/ KDC-415UA/ KDC-415UR/ KDC-4251URY/

Loading slot

KDC-4551UB/

KDC-4451UQ

Ejects the disc

USB terminal

Auxiliary input jack

The following indicator lights up when...

ST : A stereo broadcast is received. IN : A disc is in the unit. TI : Traffic Information function is

turned on.

RDS : Radio Data System service is

available.

KDC-4551UB/ KDC-455UW/ KDC-4651URY only:

ATT

(blink)

: The sound attenuates.

(Applicable only for using the remote controller (RC-405), page 15.)

EQ : [SYSTEM Q] is set to an EQ

mode other than [NATURAL]. (page 13)

B.BOOST : [BASS BOOST] is set to [1] or

[2]. (page 13)

: In Search Mode or when a

Playlist is displayed.

KDC-4651URY

When you press or hold the following button(s)...

130.com.ua

Autogood products Internet store “130”

Button General operation

Turns on. Turns off if pressed and held.

SRC

Volume knob

(turn)

Volume knob

(press)

BAND

6 (

SCRL DISP

iPod

Selects the available sources (TUNER, USB or iPod, CD, AUX, STANDBY), if the

power is turned on.

• If the source is ready, playback also starts. “iPod” and “CD” are selectable only

when an iPod is connected or a disc is loaded.

Adjusts the volume level. Selects items.

Confirms selection. Enters [FUNCTION] settings.

Selects the FM bands (FM1/ FM2/ FM3) or MW/ LW. Selects the next folder.

) Pauses/resumes playback of a disc/ USB device/ iPod.

Searches for radio station. Selects track/file. Fast-forwards/reverses tracks if pressed and held.

Changes the display information. Scrolls the display information if pressed and held. Enters clock adjustment mode directly (page 7) if pressed and held while in

clock display screen.

KDC-4551UB/ KDC-455UW/ KDC-4651URY

Selects “iPod” source. Switches the controlling terminal (HANDS ON/ HANDS OFF) for iPod

playback if pressed and held. (page 12)

KDC-4051UG/ KDC-4051UR/ KDC-4051URY/ KDC-415UA/ KDC-415UR/ KDC-4251URY/ KDC-4451UQ

Returns to the previous item. Exit from setting mode if pressed and held.

only: Selects Random Play. (page 11)

only:

About “KENWOOD Music Editor”

This unit supports the PC application “KENWOOD Music Editor Light ver1.0” or later. When you use the audio file with database information added by the “KENWOOD Music

Editor Light ver1.0,” you can search a file by title, album or artist name using Music Search.

In the Instruction manual, the term “USB device” is used to mean the device that contains

audio files with database information added with KENWOOD Music Editor.

“KENWOOD Music Editor Light ver1.0” is available from the following web site:

www.kenwood.com/cs/ce/

For further information on “KENWOOD Music Editor Light ver1.0,” refer to the site above or

the application help.

Getting started

130.com.ua

Autogood products Internet store “130”

Canceling the display demonstration

The display demonstration is always turned on unless you cancel it.

When you turn on the power (or after you reset the unit), the display shows: [CANCEL

[VOLUME KNOB]

[YES] is selected as the initial setup.

[DEMO OFF] appears.

If no operation is done for about

15 seconds or if you turn the volume knob to select [NO] in step 2, [DEMO MODE] appears and the display demonstration starts.

Setting the demonstration mode

If [ON] is selected, display demonstration

Adjusting the clock

Clock hour flashes on the display.

DEMO] \ [PRESS] \

Press the volume knob.

Press the volume knob again to confirm.

Press the volume knob to enter [FUNCTION]. Turn the volume knob to select [DEMO MODE], then press to enter. Turn the volume knob to select [ON] or [OFF].

starts if no operation is done for about 20 seconds.

Hold to finish the procedure.

Press the volume knob to enter [FUNCTION] mode. Turn the volume knob to select [SETTINGS], then press to enter. Turn the volume knob to select [CLOCK], then press to enter. Turn the volume knob to select [CLOCK ADJUST/ CLOCK ADJ], then press to enter.

Turn the volume knob to adjust the hour, then press to enter minute adjustment.

Clock minutes flashes on the display.

Turn the volume knob to adjust the minute, then press to confirm.

Press 4

hour and minute adjustment.

Hold to finish the procedure.

¢ to move between the

Maintenance

Cleaning the unit: Wipe off the dirt on the panel with a dry silicon or soft cloth. Failure to observe this precaution may result in damage to the monitor or unit.

Cleaning the connector: Wipe off dirt on the connector of the unit and faceplate. Use a cotton swab or cloth.

Handling discs

Do not touch the recording surface of

the disc.

Do not stick tape etc. on the disc, or use a

disc with tape stuck on it. Do not use any accessories for the disc. Clean from the center of the disc and

move outward. Clean the disc with a dry silicon or soft

cloth. Do not use any solvents. When removing discs from this unit, pull

them out horizontally. Remove the rims from the center hole

and disc edge before inserting a disc.

ENGLISH

+ 14 hidden pages