Kenwood JE350 Series, JE356 Series User Manual

Do not use the juicer if the filter is damaged.
Never put the motor unit, cord or plug in water – you could get an electric shock.
Switch off and unplug:
before fitting or removing parts
before cleaning
Never use a damaged juicer. Get it checked or repaired: see 'Service and customer care', page 6.
Only use the pusher supplied. Never put your fingers in the feed tube. Unplug before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
Don't let children or infirm people use the juicer without supervision.
Never let the cord touch hot surfaces or hang down where a child could grab it.
Don't touch moving parts.
Never leave the juicer on unattended.
This juicer is for domestic use only.
Don’t let children play with the machine.
before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your juicer.
Important (UK only)
The wires in the cord are coloured as follows: Blue = Neutral, Brown = Live.
This juicer complies with European Economic Community Directive 89/336/EEC.
before using for the first time
1 Remove all packaging. 2 To take your juicer apart: see 'To take your juicer apart', page 5. 3 Wash the parts: see 'Cleaning', page 5.
KENWOOD JE350 & JE356 SERIES
safety
1
0
1
2
pusherfeed tubelidfilterpulp collectorlid release buttonmotor unitspeed controljuice outletcompartment for excess cord
KENWOOD JE350 & JE356 SERIES
know your Kenwood centrifugal juicer
2
KENWOOD JE350 & JE356 SERIES
to assemble and use your juicer
preparing food
Remove stones (plums, peaches, cherries etc).
Remove tough skins (melons, pineapples, cucumbers, potatoes etc).
Soft-skinned and other foods just need washing (apples, pears, carrots, radishes, lettuce, cabbage, parsley, spinach, grapes, strawberries, celery etc).
Citrus Fruit - Peel and remove the white pith, otherwise the juice may taste bitter. For best results Kenwood citrus juicers are recommended for citrus fruit.
assembly and use
1 Fit the pulp collector so that it's slot sits above the juice
outlet
2 Fit the filter inside the pulp collector 3 Put the lid on and turn until the catch locks under the lid
release button
. Your juicer will not work if the lid is
unlocked
.
4 Push any excess cord into the compartment in the base. 5 Put a glass under the outlet 6 Cut the food into small pieces to fit the feed tube. 7 Switch on and push down with the pusher. Use speed 1
for softer food; speed 2 for harder food.
Some very hard foods may make your juicer slow down or stop. If this happens switch off and unblock the filter.
Switch off and clear the pulp collector regularly during use.
Always unplug after use.
3
0
1
2
0
1
2
Loading...
+ 5 hidden pages