Kenwood FP910 Series, FP920 Series Instruction Manual
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
FP910 series
FP920 series
instructions
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
.
3
0
.
5
0
.
7
1
.
1
1
.
3
1
.
5
0
.
9
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
.
3
0
.
5
0
.
7
1
.
1
1
.
3
1
.
5
0
.
9
(FP910)
(FP920) (FP920)
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
0
m
i
n
m
a
x
m
u
l
t
i
p
r
o
P
+++ +
efore using your Kenwood appliance
b
●
Read these instructions carefully and retain for future reference.
●
Remove all packaging and any labels.
safety
●
he blades and discs are very sharp, handle with care. Always
T
hold the knife blade by the finger grip at the top,
way from the cutting edge, both when handling and
a
leaning.
c
●
Do not lift or carry the processor by the handle - or the handle
may break resulting in injury.
●
lways remove the knife blade before pouring contents from the
A
bowl.
●
Keep hands and utensils out of the processor bowl and liquidiser
ug whilst connected to the power supply.
j
●
Switch off and unplug:
●●
before fitting or removing parts
●●
after use
●
●
before cleaning
●
Never use your fingers to push food down the feed tube. Always
use the pusher/s supplied.
●
Before removing the lid from the bowl or liquidiser or mini
chopper/mill from the power unit:-
●●
switch off;
●●
wait until the attachment/blades have completely stopped;
●●
be careful not to unscrew the liquidiser jug or mini
chopper/mill from the blade unit.
●
Liquids should be allowed to cool to room temperature before
blending.
●
Do not use the lid to operate the processor, always use the on/off
speed control.
●
This machine will be damaged and may cause injury
if the interlock mechanism is subjected to excessive
force.
●
Never use an unauthorised attachment.
●
Never leave the machine on unattended.
●
Never use a damaged machine. Get it checked or repaired: see
‘service’.
●
Never let the power unit, cord or plug get wet.
●
Don’t let excess cord hang over the edge of a table or worktop
or touch hot surfaces.
●
Do not exceed the maximum capacities stated.
●
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
●
Children should be supervised to ensure that they do not play
with the appliance.
●
Only use the appliance for its intended domestic use. Kenwood
will not accept any liability if the appliance is subject to improper
use, or failure to comply with these instructions.
●
Misuse of your processor/liquidiser can result in injury.
before plugging in
●
Make sure your electricity supply is the same as the one shown
on the underside of your machine.
Important – UK only
●
The wires in the cord are coloured as follows:
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
●
The appliance must be protected by a 13A approved (BS1362)
fuse.
ARNING: THIS APPLIANCE MUST BE EARTHED.
W
Note:
●
or non-rewireable plugs the fuse cover MUST be refitted when
F
replacing the fuse. If the fuse cover is lost then the plug must not
e used until a replacement can be obtained. The correct fuse
b
over is identified by colour and a replacement may be obtained
c
from your Kenwood Authorised Repairer (see Service).
●
f a non-rewireable plug is cut off it must be DESTROYED
I
IMMEDIATELY. An electric shock hazard may arise if an
nwanted non-rewireable plug is inadvertently inserted into a
u
13A socket outlet.
●
his appliance conforms to EC directive 2004/108/EC on
T
Electromagnetic Compatibility and EC regulation no. 1935/2004
of 27/10/2004 on materials intended for contact with food.
before using for the first time
1 Remove all packaging including the plastic blade covers from the
knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade
during manufacture and transit only.
2 Wash the parts see ‘cleaning’
3 Push excess cord into the back of the machine.
key
processor
power unit
detachable drive shaft
bowl
lid
feed tube
pushers
safety interlocks
cord storage
speed control with power on light
liquidiser
filler cap
lid
jug – plastic (FP910) & Glass (FP920)
sealing ring
blade unit
mini chopper/mill (FP920)
mill lid
jar
additional attachments
Not all of these attachments listed below will be included with your
food processor. To buy an attachment not included in your pack,
contact the dealer from whom you purchased your appliance.
knife blade
dough tool
twin beater geared metal whisk
maxi-blend canopy
thick slicing/coarse shredding disc
thin slicing/fine shredding disc
fine (Julienne style) chipper disc (if supplied)
rasping disc (if supplied)
geared citrus press (if supplied)
mini processor bowl (if supplied)
centrifugal juicer (if supplied)
KENSTORE™ attachments carousel (if supplied)
3
choosing a speed for all functions
Tool/Attachment Function Speed Maximum Capacities
nife Blade One Stage Cake Mix Min – Max 1.5Kg/3lb 5oz Total Wt
K
Knife Blade with maxi-blend canopy Soups – start at a low speed and move up to Max Min –Max 1.5 litres/2pts 12oz
hisk Egg Whites Max 6 Egg Whites
W
Dough tool Yeasted mixes Max 600g/1lb 6oz
iscs – slicing/shredding/chipping Firm food items such as carrots, hard cheese. 5 – Max
D
Rasping disc Parmesan cheese, Potatoes for German Max
Citrus Press Citrus fruits 1
Mini Bowl & knife All processing Max 200g/8oz
Liquidiser All processing Max 1.5 litres/2pts 12fl.oz
Mini chopper/Mill All processing Max
Centrifugal juicer Fruit & Vegetables Max 450g/1lb
Pastry - rubbing fat into flour 5 – Max 340g/12oz Flour Wt
dding water to combine pastry ingredients 1 – 5
A
hopping/pureeing/pates Max 600g/1lb 6oz Meat
C
Egg & sugar for fatless sponges Max
ream 5 – Max 500 mls
C
ofter items such as cucumbers, tomatoes Min – 5
S
potato dumplings.
to use your food processor
1 Fit the detachable shaft onto the power unit .
2 Then fit the bowl. Place the handle towards the back and turn
clockwise until it locks .
3 Fit an attachment over the drive shaft.
●
Always fit the bowl and attachment onto the machine before
adding ingredients.
4 Fit the lid - ensuring the top of the drive shaft locates into the
centre of the lid.
●
Do not use the lid to operate the processor, always
use the on/off control.
5 Plug in and the power on light will come on. Switch on and select
a speed.
●
The processor won’t work if the bowl and lid are fitted
incorrectly.
●
Use the pulse (P) for short bursts. The pulse will operate for as
long as the control is held in position.
6 Reverse the above procedure to remove the lid, attachments and
bowl.
●
Always switch off before removing the lid.
important
●
Your processor is not suitable for crushing or grinding coffee
beans, or converting granulated sugar to caster sugar.
●
When adding almond essence or flavouring to mixtures avoid
contact with the plastic as this may result in permanent marking.
to use your liquidiser (FP910)
1 Fit the sealing ring into the blade unit - ensuring the seal is
located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the filler cap in the lid, then turn.
5 Turn the lid in a clockwise direction to lock onto the jug.
6 Place the liquidiser onto the power unit and turn to lock .
7 Select a speed or use the pulse control.
to use your liquidiser (FP920)
1 Fit the sealing ring into the blade unit - ensuring the seal is
located correctly. Leaking will occur if the seal is
damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Fit the lid to the goblet and push down to secure . Fit the filler
cap.
5 Place the liquidiser onto the power unit and turn to lock .
6 Select a speed or use the pulse control.
●
Liquids should be allowed to cool to room temperature
before blending.
hints
●
When making mayonnaise, put all the ingredients, except the oil,
into the liquidiser.
FP910 – Then with the machine running, pour the oil into the filler
cap and let it run through.
FP920 – Remove the filler cap. Then, with the appliance running,
add the oil slowly through the hole in the lid.
●
Thick mixtures, eg pates and dips, may need scraping down. If it’s
difficult to process, add more liquid.
●
When crushing ice use the pulse in short bursts.
4
Loading...