Kenwood DV-5050M User Manual

DIGITAL AUDIO

MULTIPLE DVD VCD CD PLAYER

DV-5900M

COMPACT

DIGITAL VIDEO

MULTIPLE DVD VCD CD PLAYER

COMPACT

DIGITAL AUDIO

TEXT

DV-5050M DVF-J6050

COMPACT

DIGITAL VIDEO

This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area.

COMPACT

DIGITAL AUDIO

TEXT

INSTRUCTION MANUAL

KENWOOD CORPORATION

B60-5105-00 00 CS (E M Y)

0105

0-1 Before applying power

Caution : Read this page carefully to ensure safe operation.

Units are designed for operation as follows.

U.S.A. and Canada........................ AC 120 V only

Europe and U.K. ........................... AC 230 V only

Other countries .............................. AC 110-240 V

For the United Kingdom

Factory fitted moulded mains plug

1. The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse.

2. The fuse cover must be refitted when replacing the fuse in the moulded plug.

3. Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points

in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

IMPORTANT : The wires in the mains lead are colored in accordance with the following code:

Blue : Neutral Brown : Live

Do not connect those leads to the earth terminal of a three-pin plug.

0-2 Safety precautions

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

The marking of products using lasers

(For countries other than U.S.A., U.S.-

Military and Canada)

CLASS 1

LASER PRODUCT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The marking this product has been classified as Class 1. It means that there is no danger of hazardous radiation outside the product.

Location: Back panel

CAUTION

VISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM.

Inside this laser product, a laser diode classified as Class 2 laser radiation is contained as alerted by the internal caution label shown above. Do not stare into beam.

Location: DVD laser pick-up unit cover inside this product

0-3 Unpacking

Unpack the unit carefully and make sure that all the accessories are present.

If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and packing materials in case you need to move or ship the unit in the future.

Keep this manual handy for future reference.

0-4 Accessories

Standard remote

control unit (1)

Video cable

(1)

S-Video cable

(1)

Keyboard remote

control unit (1)

DV-5900M only

REMOTE CONTROL UNIT RC-KB2

Coaxial cable

(1)

Batteries (R6/AA) (2) (DV-5900M only)

RS-232C cable

(1)

Batteries (R03/AAA) (2)

System control cable

(2)

DV-5900M ................................... (3)

DV-5050M/DVF-J6050 ...............(1)

Audio cables

For countries other than U.S.A., U.S.-Military, Canada, Europe and U.K.

AC plug adapter (1)

Use to adapt the plug on the power

cord to the shape of the wall outlet.

(Accessory only for regions where use

is necessary.)

0-5 Features

Compatible with DVD AUDIO, one of the latest digital audio formats (DV-5900M only)

The DVD AUDIO reproduces 2-channel, 192 kHz, 24bit sampled digital audio or 6-channel, 96 kHz, 24bit sampled audio. This innovative technology has made possible audio reproduction in unprecedented high quality. Picture information and character information (ALBUM TEXT) are also provided.

Versatile DVD VIDEO Functions

The DVD VIDEO provides horizontal resolution of 430 lines, which exceeds that of DVD or S VHS video (400 lines) or laserdisc (430 lines).

Multi-audio function: With DVD discs marked with

the 8 icon, the desired language can be played back by selecting it from up to 8 languages. (The number

of available languages is variable depending on the discs.)

Multi-subtitle function: With DVD discs marked

with the 32 icon, the subtitle language can be selected from up to 32 languages. (The number of subtitle languages is variable depending on the discs.)

Angle function: With DVD discs marked with the

icon, a single object can be viewed in up to 9

angles by switching. (The number of available angles is variable depending on the discs.)

Compatibility with Wide Range of Digital Surround Software

The unit incorporates Dolby Digital decoder, DTS decoder, MPEG multi-channel decoder and Packed PCM decoder so that the users can enjoy the sound of real cinemas. The unit can also be connected to the user's existing TV set

6-Channel Output Terminals (DV-5900M only)

These output terminals can be connected to an amplifier with 6-channel input compatibility to enjoy high-bit, high-sampling rate multi-channel sound.

DVD player with CD-R and CD-RW disc compatibility

This DVD player can play back tracks recorded in CDR (Compact Disc Recordable) and CD-RW (Compact Disc Rewritable) as well as those in music CD.

* Only finalized discs can be played back.

MP3 file playback capabilities

This DVD player can also play back the MP3 files which are the latest formats for storage of music data.

400-Disc mega changer

The DVD mega changer accommodates 400 plus 3 discs, the largest number in the industry.

Daisy chain connection

Up to three units can be played, making it possible to play up to 1200 discs continuously.

Progressive scanning (NTSC area only)

The video projection method can be switched between “Interlaced” and “Progressive” scanning according to the area in which this unit is used.

Two-side playback

Double-sided DVD disc can be played back without the troublesome disc return operation. The played side of disc can simply be switched with a one-touch operation (DISC FLIP).

Title input facility

Character information such as the disc and track titles can be input on this unit.

Keyboard remote control unit (DV-5900M only)

This facilitates the title input operations.

PLUS1 - PLUS3 slots

The discs in these slots can be played or ejected with one-touch operation, without the need of designating the disc number. In addition, these slots are provided with wider areas around the grooves to facilitate insertion and ejection of discs.

DVD control function (Except for Asia)

The basic operations of this unit, such as playback and stop, can be remote controlled from the LCD remote control unit provided with a KENWOOD AV receiver.

This instruction manual is for some models. Model availability and features (functions) may differ depending on the country and sales area.

0-6 Contents

Caution : Read the pages marked carefully to ensure safe operation.

0-1 Before applying power ........................................2

0-2 Safety precautions ............................................... 2

0-3 Unpacking ........................................................... 3

0-4 Accessories ..........................................................3

0-5 Features ...............................................................4

0-6 Contents..............................................................5

0-7 Systems and Types of Playable Discs ...................7

0-7-1 Media that can be played back with this equipment

(CD-R, CD-RW) ........................................................ 7

0-7-2 Playback of CD-R and CD-RW discs ........................ 7

0-8 Unplayable Discs .................................................7

0-9 Icons Inscribed on DVD Discs ............................. 8

0-10 Region Codes of This Player ................................ 8

0-11 Region codes of the DVD VIDEO discs that can be

played with this player ........................................9

0-12 Video Formats ..................................................... 9

0-12-1 TV formats in major countries ................................. 9

0-12-2 Checking the Video Format ...................................... 9

0-12-3 When the video formats are different ...................... 9

0-13 MP3 File That Can Be Played Back with This

Equipment ........................................................ 10

Chapter 1: Connection of Equipment

1-1 Introduction...................................................... 11

1-2 Preparation of Standard Remote Control Unit

................................................................... 12

1-3 Preparation of Keyboard Remote Control Unit

................................................................... 12

1-4 STANDBY mode ................................................. 12

1-5 Connection of Video Outputs ........................... 13

1-5-1 To Setup of the Player ............................................. 13

1-5-2 Connection .............................................................. 13

1-6 Connection of Audio Output .............................15

1-6-1 2-channel stereo connection .................................. 15

1-6-2 6 channnel (5.1 ch) audio connection ................... 16

1-6-3 Digital output connection ....................................... 16

1-7 Daisy Chain Connection .................................... 18

1-7-1 Setup ........................................................................ 18

1-7-2 Connection of Video Output Terminals ................ 18

1-7-3 Connection of Audio Output Terminals ............... 19

1-8 PC Link Connection .......................................... 20

1-9 DVD Control Function ...................................... 20

Chapter 2: Controls and indicators

2-1 Introduction...................................................... 21

2-2 Front Panel ........................................................ 22

2-3 Display ..............................................................23

2-3-1 Switching the Display Brightness ........................... 23

2-4 Standard Remote Control Unit ......................... 24

2-5 Keyboard Remote Control Unit ......................... 26

Chapter 3: Basic Operation

3-1 Introduction...................................................... 27

3-2 Configuration of Discs ...................................... 28

3-3 Turning power on .............................................. 28

3-4 Inserting discs ................................................... 29

3-5 In regard to ALL DATA READ mode ...................29

3-6 Operation restriction according to the disc or

player status......................................................30

3-7 Playing discs ...................................................... 30

3-8 PLUS1 to PLUS3 slots........................................ 30

3-9 Playing discs by changing them ........................ 30

3-10 Playing from the selected disc ...........................30

3-11 Playing discs by selecting the title, chapter, track or

file ................................................................... 31

3-12 Skipping a track, chapter or file ........................ 31

3-13 Stopping playback ............................................. 31

3-14 Still picture display and playback pause ........... 31

3-15 Frame-by-frame advance .................................... 31

3-16 Forward search and reverse search ................... 32

3-17 Slow playback and reverse slow playback ......... 32

3-18 What is the “normal play TRACK mode”? .......... 32

3-19 Menu playback of DVD ...................................... 33

3-20 Menu playback of P.B.C.-compatible VCD ......... 33

3-20-1 Hierarchical structure of VCD menus .................... 33

3-20-2 Main control buttons used in VCD playback, and

examples of indications ........................................... 33

3-20-3 Switching P.B.C. On and Off ................................... 33

3-21 Switching still pictures of DVD AUDIO .............34

3-22 Switching the sequential play mode .................. 34

3-23 Repeat playback ................................................. 34

3-23-1 OSD icons that can be selected with each disc type and

mode ........................................................................ 35

3-24 Switching the time display ................................ 36

3-25 Pure Audio function .......................................... 36

3-26 Switching the audio language ........................... 36

Chapter 4: OSD Operation

4-1 Introduction...................................................... 37

4-2 Basic OSD Operation ........................................ 38

4-3 "MAIN" OSD Operation ..................................... 39

4-3-1 Selecting the disc to be played ............................... 39

4-3-2 Selecting a group, title, folder, chapter, track or file ..... 39

4-3-3 Time display switching and time search ..................... 40

0-6 Contents

Caution : Read the pages marked carefully to ensure safe operation.

4-3-4 Memory playback ..................................................... 40

4-3-5 Repeat playback ........................................................ 41

4-3-6 A-B repeat playback ................................................... 42

4-4 "SOUND" OSD Operation ................................. 43

4-4-1 Switching the audio language ................................ 43

4-4-2 Virtual Surround function ...................................... 43

4-4-3 Cinema Voice function ........................................... 44

4-4-4 Down Mix function ................................................ 44

4-5 "VISUAL" OSD Operation ..................................45

4-5-1 Switching the subtitle language ............................. 45

4-5-2 Adjusting the picture quality .................................. 45

4-5-3 Switching the viewing angle ................................... 47

Chapter 5: Applied Operations

5-1 Introduction...................................................... 48

5-2 Switching the Play Modes ..................................49

5-3 Program Playback ............................................. 49

5-3-1 Registering and playing the program ..................... 49

5-3-2 Checking the program ............................................ 50

5-3-3 To change a track in the program........................... 50

5-3-4 Clearing the program .............................................. 50

5-4 Random playback .............................................. 50

5-4-1 Stopping random playback .................................... 50

5-5 TEXT DISC Operation........................................ 51

5-5-1 Switching the character information ..................... 51

5-6 Daisy chain function ......................................... 52

5-6-1 Turning power on ................................................... 52

5-6-2 Features available with daisy chain connection .... 52

5-6-3 Operation procedure .............................................. 52

5-7 Switching the "DVD Video Mode" .....................53

5-8 Playback of Double-Sided DVD .........................53

5-9 Bonus Group ..................................................... 53

Chapter 6: Specifying and Using Disc or Track Data

6-1 Introduction...................................................... 54

6-1-1 The DVD mega-changer can ...............................55

6-1-2 Steps of MODE button operation ....................... 55

6-2 Listening to music by genre .............................. 56

6-2-1 Registration of music type ...................................... 56

6-2-2 Playing the music type ............................................ 56

6-2-3 To clear the music type ........................................... 57

6-3 Reorganizing discs to desired groups ............... 57

6-3-1 Registration of user file ........................................... 57

6-3-2 Playing the user file ................................................. 58

6-3-3 To clear the user file ................................................ 58

6-3-4 To initialize the user file ......................................... 58

6-3-5 Assigning user file names ....................................... 59

6-4 Registration of Title .......................................... 61

6-4-1 Assigning Title ......................................................... 61

6-5 Disc search ........................................................ 64

6-5-1 Disc search using the remote control unit............. 64

6-5-2 Disc search using the OSD ..................................... 66

6-6 Searching a desired folder/file by its title ......... 70

Chapter 7: Various Setups

7-1 Introduction...................................................... 71

7-2 Basic Operations in Setup Screen ..................... 72

7-3 "MAIN" Setting ..................................................73

7-3-1 When "MAIN" is selected in "SET UP MENU" ..... 73

7-3-2 "Rating" Setting ....................................................... 75

7-3-3 Input of Password ................................................... 75

7-4 "SOUND" Setting...............................................76

7-4-1 When "SOUND" is selected in "SET UP MENU" ....... 76

7-4-2 "Speaker Setting" ..................................................... 78

7-4-3 Delay Time Setting .................................................. 81

7-5 "VISUAL" Setting ............................................... 82

7-5-1 When "VISUAL" is selected in "SET UP MENU" ........ 82

7-5-2 Disc Language Code Table...................................... 85

Chapter 8: Other Information

8-1 Malfunction of Microcomputer ......................... 86

8-2 To Be Noted .......................................................87

8-3 Troubleshooting ................................................ 89

8-4 Glossary ............................................................ 91

8-5 Specifications ....................................................94

0-7 Systems and Types of Playable Discs

DV-5900M

DVD AUDIO

Yes

DVD VIDEO

Yes

Other

–

Yes

0-7-1 Media that can be played back with this

equipment (CD-R, CD-RW)

Usable media apart from audio CDs (CD-DA)

Usable media : CD-ROM, CD-R, CD-RW

Usable formats : ISO9660 level 1 (excluding

expanded formats)

Representative disc formats

Optical Disc Format

Playback on This Unit

Applicable Disc Types

÷ This unit cannot play back a disc written with

packet writing.

÷ This unit can play back the discs written with the

following writing methods:

Disc At Once

Track At Once

Session At Once

÷ This unit can play back only the closed sessions.

÷ This unit can play back only the finalized discs.

COMPACT

DIGITAL AUDIO

VCD

COMPACT

DIGITAL VIDEO

DIGITAL AUDIO

COMPACT

TEXT

Yes

CD-DA

CD-ROM MODE 1

CD-ROM MODE 2

CD-ROM XA MODE 2 Form 1

CD-ROM XA MODE 2 Form 2

Yes

Music CD, etc.

CD-ROM (Yellow book), etc.

CD-I, etc.

Video CD, etc.

Photo CD, etc.

0-7-2 Playback of CD-R and CD-RW discs

The playback of these discs may be restricted depending on the status of data written in the discs. Certain CD-R and CD-RW discs may be unable to be played back on this unit even when they have been written according to the above condition as described below.

0-8 Unplayable Discs

Never attempt to play a 8 cm disc on this unit. Otherwise, the disc data may be destroyed.

Other discs which cannot be played on this unit:

¶ Photo CD, SACD, DVD-ROM, DVD-R/RAM, DVD-

RW, VSD, CDV*, CD-G*, CD-EG*, CD-EXTRA*, etc.

* Only the audio part can be reproduced.

¶ A DVD VIDEO disc with a region code which does

not match this unit or without a region code. For details, see "Region Codes of This Player".8

¶ When the video format of a disc differs from that

of the TV in use, the disc cannot be played normally. For details, see "Video Formats". 9

0-9 Icons Inscribed on DVD Discs

ALL

Indicates the playable region code.

Indicates the number of languages in the audio. The figure in the icon shows the number (max. 8 languages).

Indicates the number of available subtitle languages. The figure in the icon shows the number (max. 32 subtitle languages).

Indicates the number of viewing angles which can be viewed with the angle function. The figure in the icon shows the number (max. 9 angles).

16:9 LB

LB stands for Letter Box and PS stands for Pan & Scan. (The example shown means that the 16:9 video can be converted into letterbox.)

Indicates the number of available aspect ratios.

0-10 Region Codes of This Player

(DVD VIDEO disc only)

A region code defined for each country or area is assigned for each DVD VIDEO player, so it cannot play a DVD VIDEO disc if its region code do not match that of this unit. Also, a disc which does not contain any region code may sometimes be unable to be played on the player.

When purchasing a DVD VIDEO disc, make sure that it has a region code which can be played on your player.

Region Code of Player:

Usable Country or Area : Canada, United States,

American Samoa, Bermuda, Johnston Island, Midway Islands, Puerto Rico, St. Pierre and Miquelon, United States Virgin, Wake Island

Region Code of Player :

Usable Country or Area : Albania, Andorra, Austria,

Bahrain, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Cyprus, Czech, Denmark, Egypt, Finland, France, Germany, Greece, Hungary, Iceland, Iran, Iraq, Ireland, Israel, Italy, Japan, Jordan, Kuwait, Lebanon, Lesotho, Liechtenstein, Luxembourg, Macedonia, Malta, Monaco, Netherlands, Norway, Oman, Poland, Portugal, Qatar, Romania, San Marino, Saudi Arabia, Slovakia, Slovenia, South Africa, Spain, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Turkey, United Arab Emirates, United Kingdom, Vatican City State, Yemen, Yugoslavia, Channel Islands, Faeroe Islands, Gibraltar, Greenland, Isle of Man, Svalbard and Jan Mayen Islands

Region Code of Player :

Usable Country or Area : Brunei Darussalam,

Cambodia, Indonesia, Korea, Laos, Malaysia, Myanmar, Philippines, Singapore, Thailand, Viet Nam, East Timor, Hong Kong, Macau, Taiwan

Region Code of Player :

Usable Country or Area : Antigua and Barbuda,

Argentina, Australia, Bahamas, Barbados, Belize, Bolivia, Brazil, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Fiji, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, Kiribati, Marshall Islands, Mexico, Micronesia, Nauru, New Zealand, Nicaragua, Palau, Panama, Papua New Guinea, Paraguay, Peru, Saint Christopher and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, Solomon Islands, Suriname, Tonga, Trinidad and Tobago, Tuvalu, Uruguay, Vanuatu, Venezuela, Anguilla, British Virgin Islands, Cayman Islands, Christmas Island, Cocos Islands, Cook Islands, Falkland Islands, French Guiana, French Polynesia, Guadeloupe, Guam, Martinique, Montserrat, Netherlands Antilles, New Caledonia, Niue, Norfolk Island, Northern Mariana Islands, Pitcairn, Tokelau, Turks and Caicos Islands, Wallis and Futuna Islands

Region Code of Player :

Usable Country or Area : Afghanistan, Algeria,

Angola, Armenia, Azerbaijan, Bangladesh, Belarus, Benin, Bhutan, Botswana, Burkina Faso, Burundi, Cameroon, CapeVerde, Central Africa, Chad, Comoros, Congo, Cote d'Ivoire, Djibouti,

Equatorial Guinea, Eritrea, Estonia, Ethiopia, Gabon, Gambia, Georgia, Ghana, Guinea, GuineaBissau, India, Kazakhstan, Kenya, Kyrgyz Republic, Latvia, Liberia, Libya, Lithuania, Madagascar, Malawi, Maldives, Mali, Mauritania, Mauritius, Moldova, Mongolia, Morocco, Mozambique, Namibia, Nepal, Niger, Nigeria, North Korea, Pakistan, Russia, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, Sri Lanka, Sudan, Tadzhikistan, Tanzania, Togo, Tunisia, Turkmenistan, Uganda, Ukraine, Uzbekistan, Zaire, Zambia, Zimbabwe, British Indian Territory, Jammu and Kashmir, Mayotte, Reunion, St. Helena ex. dep., Western Sahara

0-12 Video Formats

The TV picture display and disc signal systems can be divided roughly into two TV formats (NTSC and PAL). They are variable depending on countries and areas.

This unit reproduces NTSC discs in NTSC format and PAL discs in PAL format. If the video formats of the disc and TV do not match, the disc cannot be reproduced correctly. It is therefore required to select the disc according to the TV set in use (country and area).

TV Format Playable Disc Format

NTSC only *

PAL only

NTSC/PAL

switchable

¶ Correct video cannot be reproduced if the video formats

of the TV and disc do not match.

NTSC*

PAL

NTSC/PAL

Region Code of Player :

Usable Country or Area : ChinaCaicos Islands,

Wallis and Futuna Islands

Region Code of Player :

Professional use disc (Air Line cabin service)

0-11 Region codes of the DVD VIDEO discs that can be played with this player

This player can play back a DVD VIDEO disc which carries the corresponding code to the region code of the player shown in the table above, a marking containing the region code of the player or the “ALL” marking shown below. Even when a DVD VIDEO disc does not carry any indication of the region code, it may sometimes unable to be played on this player due to certain restrictions.

ALL

0-12-1 TV formats in major countries

NTSC : Japan, Taiwan, Korea, USA, Canada, Mexico,

Philippines, Chile, etc.

PAL : China, U.K., Germany, Australia, New Zealand,

Kuwait, Singapore, etc.

0-12-2 Checking the Video Format

Check the video format of the VCD and DVD discs to be played on the player as described below.

1. Check if the video formats of the TV to be used and

disc to be played match each other.

¶ For details, refer to the instructions provided with

the TV and disc.

2. When the TV is switchable between NTSC and

PAL, set the TV format according to the disc format.

0-12-3 When the video formats are different

Try playing the disc. If the video formats of the disc and TV do not match, the played video may be black and white or become as shown below.

Top and bottom edges are not displayed.

Top and bottom areas are dark.

Picture turbulence due to sync unmatching.

0-13 MP3 Files That Can Be Played Back with This Equipment

Compressing MP3 files

Please set up the transfer bit rate setting for the compression software when compressing MP3 files as follows:

MP3 file

128kbps recommended (32 kbps-320 kbps)

÷ This unit is compatible with 32kHz, 44.1kHz

(recommended) and 48 kHz samplimg frequencies.

Categorizing folders

As MP3 files are compressed into high-quality sound files at an extremely high rate of compression, it is possible to record several times more tracks than audio CDs onto a single medium. It is therefore convenient to split the tracks into different folders by genre, artist or album for retrieval and repeat playback purposes.

÷ A maximum of 999 folders or a maximum of 999

files can be stored on a single media.

÷ There are cases where it is not possible to save

folders in the desired sequence depending on the software being used.

Additional information

Usable formats : ISO9660 level 1 (excluding expanded formats)

Text display

Both file and folder names are displayed in up 8 uppercase alphanumeric characters.

Time display

With a MP3 files, only the "Single Time" information is displayed.

ID3-TAG infomation

This unit is not compatible with this function.

“Digital” output from MP3 files

This unit does not output the “Digital” signal when it plays back an MP3 files.

Restriction by session

This unit can play back only the closed sessions.

With CD-DA

With a multi-session disc, this unit plays back the first session only.

With MP3 files

Note on the multi-session disc and CD-DA (music data)

÷ This unit is compatible with multi-session discs.

÷ The music CD data (CD-DA data) can be played

only when its first session is composed of music CD data (CD-DA data). The second and later sessions are not played back.

Never add the MP3 extension logs to any files other than MP3 files. If the MP3 extension logs are added to any files other than MP3 files, the equipment will assume that they can be played back, and this will produce loud noises in the speakers, resulting in damage of adverse effects.

Check to ascertain that MP3 files can be played back correctly on the personal computer in use prior to saving them onto the media. Check to ensure that the saved file can be played back normally.

÷ It is not possible to confirm that files can be played

back correctly while they are being saved onto the media.

Ensure that the session is closed or finalized when data has been written on media. There are cases where media on which the session has not be closed or finalized will not be played back correctly with this equipment.

÷ There are cases were the folder names and file

names will not be displayed correctly depending on the software used to save them.

÷ There are cases where playback is not possible

when MP3 files (CD-ROM) and music CD information (CD-DA) are saved on the same media.

÷ When a disc contains a mixture of different formats

such as the CD-DA and MP3, the data in the CDDA format will be played in priority.

However, when "the number of sessions is '2'" and "its second session is composed of music CD data (CD-DA data)", the music CD data (CD-DA) can be played back.

Chapter 1: Connection of Equipment

1-1 Introduction

This manual describes the standard, most typical connections of the player. When an associated system component is connected, also refer to their instruction manuals.

For details on the connection of the following components, see the indicated reference pages.

Preparation of Standard Remote Control Unit..................... @

Preparation of Keyboard Remote Control Unit .................... @

STANDBY mode ..................................................................... @

Connection of Video Outputs ............................................... #

Connection of Audio Output ................................................ %

Daisy Chain Connection ....................................................... *

PC Link Connection .............................................................. )

DVD Control Function .......................................................... )

Before Start

Do not install the player in a place where the remote control sensor is subjected to direct sunlight or the light of a fluorescent lamp base on high-frequency lighting (inverter system, etc.). Otherwise, the control range of the standard remote will be reduced.

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Do not insert the power cord plugs of the player and the connected components until all of the components have been connected.

Be sure to insert all connection cables securely. If a cable is plugged incompletely, lack of video, lack of audio or noise may result.

Before connecting or disconnecting a connection cord, be sure to unplug the power plug from the wall power outlet. If a connection cable is connected or disconnected while the power plug is left connected, malfunction or equipment damage may result.

CAUTION

Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.

÷ Do not place any objects impairing heat radiation onto the top of the unit.

÷ Leave some space around the unit (from the largest outside dimension including projection) equal to or greater

than, shown below.

Top panel : 10 cm Side panel : 10 cm Back panel : 10 cm

Chapter 7

Chapter 8

Chapter 1: Connection of Equipment

1-2 Preparation of Standard Remote Control Unit

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

Installing the batteries:

Open the cover and insert the batteries (R03/AAA) by observing the polarity marking.

\ \

Remote control range:

30° 30°

1-3 Preparation of Keyboard Remote Control Unit (DV-5900M only)

Installing the batteries:

Open the cover and insert the batteries (R6/AA) by observing the polarity marking.

1-4 STANDBY mode

While the "STANDBY" indicator of the unit is lit, a small amount of current is flowing into the unit’s internal circuitry to back up the memory. This condition is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned on from the remote control unit.

Remote control range:

30° 30°

REMOTE CONTROL UNIT RC-KB2

Chapter 6

Chapter 7

Chapter 8

¶ When the controllable distance of the keyboard

remote reduces, replace both batteries with new ones.

¶ When the controllable distance of the standard

remote reduces, replace both batteries with new ones.

Chapter 1: Connection of Equipment

1-5 Connection of Video Outputs

This unit can be connected to a TV through the following connections.

Composite VIDEO OUTPUT connectors

S-VIDEO OUTPUT connectors

COMPONENT VIDEO OUTPUT connectors

SCART connector (For Europe and U.K.)

Select the connection according to the TV to be connected.

After connecting the TV, be sure to change the setup of the unit according to the TV.

÷ Do not insert the power cord plugs of the player and the connected components

until all of the components have been connected.

÷ For details on the connection terminals and functions of the TV, refer to its

instruction manual.

1-5-1 To Set Up of the Player

Setup of Menu screen: The language to be used in the menus of the player can

be selected.

1-5-2 Connection

a : Composite video connection

Connect the VIDEO OUTPUT terminal to the video input of the TV using the provided video cable.

IX LINE

UT OUTPUT

AUDIO

6 CH. OUTPUT

SURROUND

FRONT

CENTER

YCBCRYCBC

SUB WOOFER

VIDEO

COMPONENT VIDEO

INPUT

S VIDEO

INPUT

OUTPUT OUTPUT

Video cable (Provided)

VIDEO

OUTPUT

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

Illust Model : DV-5900M

b : S Video connection

If the TV has an S Video input connector, connect the S VIDEO OUTPUT connector of the player to it using the provided S Video cable.

¶ As S Video separates video signal into the brightness signal (Y) and color signal

(C), it can provide sharper pictures than composite video connection.

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

"Player Menu Language" Setting S

÷ The default language set at the factory is English.

S VIDEO

S-Video cable (provided)

Chapter 6

Setups Related to TV: The following setups can be made according to the TV

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

OUTPUT

Chapter 7

Chapter 8

connected to the player.

"TV Aspect" Setting d

"TV Mode" Setting d

"TV Monitor Type" Setting d

Setup of SCART output signals: The signals output from the TV SCART con-

nector of the player can be selected.

"SCART Output Select" Setting F

÷ If both connections “Composite video connection” and “S Video connection”

are made, “S Video connection” is used in priority on the main unit.

÷ For details on the connection terminals and functions of the TV, refer to its

instruction manual.

AISY CHAIN

NTROL

MAIN-SUB

SWITCH

MAIN

SUB2

SUB1

MIX LINE

INPUT OUTPUT

AUDIO

6 CH. OUTPUT

FRONT SURROUND

SUB WOOFER

Illust Model : DV-5900M

COMPONENT VIDEO

INPUT

CENTER

YCBCRYCBC

OUTPUT

S VIDEO

INPUT

OUTPUT

Chapter 1: Connection of Equipment

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

C : Component video connection

d : SCART connection (For Europe and U.K.)

If the TV has component video input terminals, connect the Y, CB and CR COMPONENT VIDEO OUTPUT terminals to the corresponding jacks on the TV using video

cables.

¶ As component video separate video signal into the brightness signal (Y) and

color difference signals (CB, CR), it can provide sharper image than the S Video connection.

¶ Depending on the TV or video monitor in use, the terminal names may be

different from those used with the player (Y/Pb/Pr or Y/B-Y/R-Y, etc.)

¶ When the TV in use is a HDTV or "Hi-Vision" TV, connect the component video

signals from the player only to the DVD-compatible input jacks.

COMPONENT

VIDEO IN

YCbCr

Video cable

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

OUTPUT

COMPONENT VIDEO

INPUT

BCR

OUTPUT

YCBC

S VIDEO

INPUT

OUTPUT

Illust Model : DV-5900M

Chapter 6

COMPONENT VIDEO OUTPUT switch (NTSC Format only)

If the TV or VCR has SCART connectors, connect the TV SCART or VCR SCART connector of this unit to the TV or VCR using SCART cables.

¶ The audio and video signals can be output using a single cable. The signal output

from the TV SCART connector can be switched between composite video, S

Video and RGB. (The VCR SCART connector always outputs composite video signals so its output signals cannot be selected.)

¶ When the TV is connected through a VCR using SCART connection, the picture

displayed on the TV may be disturbed due to the copy protect function.

¶ When using only the TV and VCR which are both connected with the player

using the SCART connection, the signal from the VCR cannot be sent to the TV if the player is switched off. (In this case, set the player to the power standby mode.)

¶ When the COMPONENT VIDEO OUTPUT connectors are used, do not set

“SCART Output Select” in the Set Up menu to “RGB”. F

SCART IN

SCART cable

TV SCART

SCART IN

INPUT OUTPUT

Chapter 7

Chapter 8

S VIDEO

112

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

OUTPUT

Select the scanning method of the Component Video output using the COMPONENT VIDEO OUTPUT switch on the rear panel.

INTERLACE : Scanning method is fixed at interlaced scanning.

PROGRESSIVE : When progressive scanning is unavailable with

certain discs, the scanning method is switched automatically to interlaced scanning. When the unit is performing progressive scanning, “PROGRESSIVE” light in the display.

DIGITAL

(PCM/BIT STREAM)

VCR SCART

DAISY CHAIN

AUDIO

COMPONENT VIDEO

VCR etc.

Chapter 1: Connection of Equipment

1-6 Connection of Audio Output

Do not insert the power cord plugs of the player and the connected components until all of the components have been connected.

For details on the connection terminals and functions of the AV amplifier, refer to its instruction manual. The video output from the player should be connected directly to the AV amplifier. If the video output is connected through a VCR, the picture displayed on the TV may be disturbed due to the copy protect function.

1-6-1 : 2-channel stereo connection

You can enjoy stereo sound if you connect the TV or system component that has 2channel stereo connection.

DV-5900M

Connect to the MIX LINE OUTPUT connectors.

DV-5050M/DVF-J6050

Connect to the MIX LINE OUTPUT or AUDIO OUTPUT L/R connectors.

AUX IN

L R

DAISY CHAIN

CONTROL

MAIN-SUB

SWITCH

MAIN

SUB2

SUB1

MIX LINE

INPUT OUTPUT

AUDIO

FRONT SURROUND

Illust Model : DV-5900M

AUDIO

L R

Audio cable (Provided)

6 CH. OUTPUT

SUB WOOFER

COMPONENT VIDEO

INPUT

CENTER

YCBCRYCBC

OUTPUT

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

OUTPUT

S VIDEO

INPUT

OUTPUT

For DV-5050M/DVF-J6050

DTS disclaimer clause

When playing DTS-encoded (CDs, LDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player.

For DV-5900M

DTS disclaimer clause

DTS Digital Surround™ is a discrete 5.1 channel digital audio format available on CD, LD, and DVD software which consequently cannot be decoded and played back inside most CD, LD, or DVD players. For this reason, when DTS-encoded software is played back through the analog outputs of the CD, LD, or DVD player, excessive noise will be exhibited. To avoid possible damage to the audio system, proper precautions should be taken by the consumer if the analog outputs are connected directly to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the CD, LD or DVD player.

This unit is equipped with DTS Digital Surround™ decoder.

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Chapter 7

÷ When playing a disc containing MPEG multi-channel audio recording, connect

the stereo input to the 6ch OUTPUT L/R terminals and activate the DOWN MIX function (r). (DV-5900M only)

÷ Read the instructions for the TV and speakers or system component for

connection details.

Chapter 8

Chapter 1: Connection of Equipment

1-6-2 : 6 channnel (5.1 ch) audio connection (DV-5900M only)

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

When the connected AV amplifier has 6-channel audio input terminals, Please connect the 6CH. OUTPUT terminals to them.

Speaker Setting

To 6ch Input terminal

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

OUT

DVD

CONTROL

DAISY CHAIN

CONTROL

MAIN-SUB

SWITCH

MAIN

INPUT OUTPUT

SUB2

SUB1

Illust Model : DV-5900M

Setup for 6-channel audio connection:

÷ When the audio is connected using the 6CH. OUTPUT terminals, set the player

as follows. "Speaker Setting" k

÷ When a DVD AUDIO disc is played, the player can output audio signals at very

high frequencies. As this may sometimes lead to speaker damage due to a highvolume sound, do not set "Audio Filter" to "Filter 110 kHz" when the speakers in use are not suitable for high-frequency reproduction. j

Chapter 6

÷ When connection of 3 or more channels is required, connect the audio inputs

to the 6ch OUTPUT connectors on the rear panel according to the speakers in use.

After connection, set the non-used speakers to “OFF” with the “Speaker setting” function. k

Chapter 7

AUDIO

6 CH. OUTPUT

FRONT SURROUND

SUB WOOFER

COMPONENT VIDEO

INPUT INPUT

CENTER

B CR YCB CR

OUTPUT

S VIDEO

OUTPUTMIX LINE

COMPONENT

VIDEO

OUTPUT

INTE RLACE PROGRESSIVE

VIDEO

OUTPUT

1-6-3 : Digital output connection

Use the DIGITAL output terminal when using an external decoder (or an AV amplifier with built-in decoder) to decode Dolby Digital and DTS Digital Surround signals.

To use the external decoder, it is required to change the “SOUND” setup in the Set Up menu. h

Speaker setting

The speakers are to be set up on the amplifier. k

Audio filter (Speaker protect)

The audio filtering is to be set up on the amplifier. j

Coaxial cable (Provided)

Illust model : DV-5900M

Note : When connecting the optical digital audio cable

COAXIAL OPTICAL

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

CONTROL

OUT

Optical cable

DAISY CHAIN

CONTROL

MAIN-SUB

DVD

SWITCH

MAIN

SUB2

SUB1

Speaker Setting

COMPONENT VIDEO

INPUT INPUT

CENTER

B CR YCB CR

OUTPUT

S VIDEO

OUTPUTMIX LINE

INPUT OUTPUT

AUDIO

6 CH. OUTPUT

FRONT SURROUND

SUB WOOFER

Dust protection cap Align the plug

with the terminal

OUTPUT

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

Chapter 8

÷ Remove the dust protection cap from the optical digital audio output terminal

and connect the cable firmly so that the configurations of both the cable and the terminal match.

÷ Keep the dust protection cap and reattach when not using the terminal.

a : External decoder type & SetUp menu "sound"

External decorder

Setup Function

PCM Down Conversion

Dolby Digital

DTS Digital Surround

MPEG Multi channel

Dolby Digital decorder DTS Digital Surround

type

Yes*

Bitstream

DV-5900M

PCM

Other

Off

PCM PCM

decorder

DV-5900M

Bitstream

Other

Bitstream

Yes *

PCM

MPEG decorder

Yes*

PCM

DV-5900M

PCM

Other

Off

Bitstream

* If this is set to "No", no audio will be output when DVDs recorded in 96 kHz linear PCM are played. (Audio

will be output as it is the DVD does not have copyright protection recorded on it.)

Dolby Digital/DTS Digital Surround decorder

Yes*

Bitstream

DV-5900M

Bitstream

Other

Bitstream

PCM

Dolby Digital/DTS Digital Surround/MPEG decorder

Yes*

Bitstream

DV-5900M

Bitstream

Other

Bitstream

Chapter 1: Connection of Equipment

No decorder

Yes*

PCM

DV-5900M

PCM

Other

Off

PCM

Chapter 1

Chapter 2

Chapter 3

Chapter 4

These changes to digital audio output must be made, otherwise bitstream signals the decoder cannot handle will be output. If these signals are output, "noise" will be output which can cause harm to your ears and speakers.

Chapter 5

Chapter 6

Chapter 7

Chapter 8

Chapter 1: Connection of Equipment

1-7 Daisy Chain Connection

Up to three changer units can be connected in series.

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

÷ The three units can mutually control other units.

÷ Up to 1200 discs can be played back continuously by connecting three units.

÷ Relay playback, with which discs are played in a random order is possible.

Relay playback cannot control discs in the PLUS1 to PLUS3 slots.

1-7-2 Connection of Video Output Terminals

Connect the video output using either the S-VIDEO or COMPONENT VIDEO connection.

For the connection, connect the “SUB2” unit output to the “SUB1” unit input, then connect the “SUB1” unit output to the “MAIN” unit input as shown in the figure below.

Random relay playback cannot play discs in the PLUS1 to PLUS3 slots.

Daisy Chain Connection

MAIN

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

OUT

DAISY CHAIN

CONTROL

DVD

CONTROL

OUT

MIX LINE

INPUT OUTPUT FRONT SURROUND

MAIN-SUB

SWITCH

MAIN

SUB2

SUB1

SUB 1

AUDIO

6 CH. INPUT

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

CENTER

YCbCr YCbCr

CONTROL

OUT

SUB WOOFER

COMPONENT VIDEO

DAISY CHAIN

INPUT INPUT

CONTROL

DVD

MIX LINE

OUTPUT OUTPUT

INPUT OUTPUT FRONT SURROUND

MAIN-SUB

SWITCH

MAIN

SUB2

SUB1

S VIDEO

SUB 2

AUDIO

6 CH. INPUT

System control cable (Provided)

1-7-1 Setup

Set the MAIN-SUB SWITCH on the rear panel of each changer unit to a different position from other changer units.

Chapter 6

Be sure to unplug the power cord before changing the position of the MAIN-SUB SWITCH.

Be sure to set one of the MAIN-SUB SWITCH to “MAIN”.

DIGITAL

COMPONENT VIDEO

(PCM/BIT STREAM)

COAXIAL

OPTICAL

COMPONENT

CENTER

VIDEO

OUTPUT

OUT

INTERLACE PROGRESSIVE

SUB WOOFER

DAISY CHAIN

VIDEO

INPUT INPUT

OUTPUT

DVD

YCbCr YCbCr

CONTROL

OUTPUT

MAIN-SUB

SWITCH

MAIN

SUB1

SUB2

INPUT OUTPUT F

System control cable (Provided)

DAISY CHAIN

CONTROL

MAIN-SUB

MAIN

MIX LINE

SWITCH

SUB1

Example Using S-VIDEO Connection

MAIN

S VIDEO

LINE

OUTPUT

Illust Model : DV-5900M

SUB2

(PCM/BIT STREAM)

INPUT OUTPUT

VIDEO

S-video cable (Provided)

SUB 1

DIGITAL

COAXIAL

OPTICAL

OUTPUT

COMPONENT

VIDEO

DVD

OUTPUT

CONTROL

OUT

INTERLACE PROGRESSIVE

OUT

VIDEO

DAISY CHAIN

CONTROL

MIX LINE

INPUT OUTPUT

MAIN-SUB

SWITCH

MAIN

SUB2

SUB1

S-video cable (Provided)

S VIDEO

INPUT OUTPUT

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

DIGITAL

DAISY CHAIN

(PCM/BIT STREAM)

VIDEO

COAXIAL

OPTICAL

OUTPUT

OUT

S-video cable (Provided)

SUB 2

S VIDEO

INPUT OUTPUT

MAIN-SUB

DVD

SWITCH CONTROL

MAIN

SUB1

SUB2

MIX LINE

INPUT OUTPUT CONTROL

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

OUTPUT

It is the unit set as the “MAIN” unit that manages the discs and output the playback

Chapter 7

signals to speakers.

When peripheral equipment (TV, AV amp, etc.) is used, connect it to the unit set as the “MAIN” unit. “Daisy Chain Function” W

Chapter 8

Chapter 1: Connection of Equipment

Chapter 1

1-7-3 Connection of Audio Output Terminals

Connect the audio output using either the “Digital” or “Analog” connection (see figure on the right).

For the connection, connect the “SUB2” unit output to the “SUB1” unit input, then connect the “SUB1” unit output to the “MAIN” unit input.

Connection and Setup

Use the “Analog” connection when any of the following types of discs is included.

A disc containing the recording of MP3 files.

DVD-AUDIO disc (DV-5900M only)

When using the “Digital” connection:

Set the “PCM Down conversion” setup to “On”. h

When both “Analog” and “Digital” connections are connected :

The Digital connection is used in priority when the input mode of the receiver is set to the “AUTO” position.

To use the Analog connection, switch the input mode of the receiver to “Analog” position.

Digital Audio Connection

COAXIAL

Coaxial cable (Provided)

MAIN SUB 2SUB 1

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

OUT

Illust Model : DV-5900M

Analog Audio Connection

AUDIO

Audio cable (Provided)

DVD

CONTROL

DAISY CHAIN

CONTROL

DIGITAL

AUDIO

MIX LINE

INPUT OUTPUT FRONT SURROUND

MAIN-SUB

SWITCH

MAIN

SUB2

SUB1

(PCM/BIT STREAM)

6 CH. INPUT

COAXIAL

OUT

SUB WOOFER

CENTER

Coaxial cable (Provided)

Audio cable (Provided)

COMPONENT VIDEO

DAISY CHAIN

INPUT INPUT

OPTICAL

CONTROL

DVD

Y Cb Cr Y Cb Cr

CONTROL

OUT

S VIDEO

MIX LINE

OUTPUT OUTPUT

INPUT OUTPUT FRONT SURROUND

MAIN-SUB

SWITCH

SUB2

MAIN

SUB1

DIGITAL

COMPONENT VIDEO

AUDIO

6 CH. INPUT

(PCM/BIT STREAM)

COAXIAL COMPONENT IN

CENTER

VIDEO

OUTPUT

OUT

INTERLACE PROGRESSIVE

SUB WOOFER

OPTICAL

OUTPUT

OUT

DAISY CHAIN

VIDEO

INPUT INPUT

CONTROL

MAIN-SUB

DVD

Y Cb Cr Y Cb Cr

CONTROL

SWITCH

MAIN

Coaxial cable (Provided)

Audio Cable (Provided)

OUTPUT

SUB1

SUB2

MIX LINE

INPUT OUTPUT FRONT

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Analog Audio Connection

÷ When playing a disc containing MPEG multi-channel audio

recording, connect the stereo input to the 6ch OUTPUT L/R terminals and activate the DOWN MIX function (r).

(DV-5900M only)

MAIN

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

OUT

Illust Model : DV-5900M

DVD

CONTROL

DAISY CHAIN

CONTROL

MAIN-SUB

SWITCH

MAIN

SUB1

MIX LINE

INPUT OUTPUT FRONT SURROUND

SUB2

AUDIO

6 CH. INPUT

SUB WOOFER

SUB 1

(PCM/BIT STREAM)

COAXIAL

CENTER

Y Cb Cr Y Cb Cr

OUT

DIGITAL

COMPONENT VIDEO

INPUT INPUT

OPTICAL

OUT

DAISY CHAIN

OUTPUT OUTPUT

CONTROL

MAIN-SUB

DVD

CONTROL

SWITCH

MAIN

S VIDEO

MIX LINE

INPUT OUTPUT FRONT SURROUND

SUB2

SUB1

AUDIO

6 CH. INPUT

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

OUTPUT

SUB WOOFER

SUB 2

DIGITAL

(PCM/BIT STREAM)

INPUT INPUT

COAXIAL IN

CENTER

Y Cb Cr Y Cb Cr

OUT

COMPONENT VIDEO

OUTPUT

OPTICAL

DVD

CONTROL

OUT

DAISY CHAIN

CONTROL

MAIN-SUB

SWITCH

MAIN

SUB2

SUB1

AUDIO

MIX LINE

INPUT OUTPUT FRONT

Chapter 7

Chapter 8

Chapter 1: Connection of Equipment

1-8 PC Link Connection

PC LINK function, which allows you to connect your PC to the DVD mega-changer

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

and download disc titles and track data from an Internet site and register them in the DVD mega-changer.

http://www.kenwoodusa.com

RS-232C cable(Reverse type) (Provided)

1-9 DVD Control Function

(Except for DVF-J6050 Asia version)

The basic operations of this unit, such as playback and stop, can be remote controlled from the LCD remote control unit provided with a KENWOOD AV receiver*.

÷ Connect the DVD control terminal of the AV receiver to the DVD CONTROL

terminal of this unit using a system control cable.

* The receiver should be equipped with the DVD control function.

DVD

CONTROL

System control cable (Provided)

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

OUT

DVD

CONTROL

DAISY CHAIN

CONTROL

MAIN-SUB

SWITCH

MAIN

MIX LINE

INPUT OUTPUT FRONT SURROUND

SUB2

SUB1

AUDIO

6 CH. INPUT

CENTER

SUB WOOFER

COMPONENT VIDEO

INPUT INPUT

Y Cb Cr Y Cb Cr

S VIDEO

OUTPUT OUTPUT

COMPONENT

VIDEO

OUTPUT

INTE RLACE PROGRESSIVE

VID

OUT

Chapter 6

Chapter 7

Chapter 8

Illust Model : DV-5900M

DIGITAL

(PCM/BIT STREAM)

COAXIAL

OPTICAL

OUT

DVD

CONTROL

DAISY CHAIN

CONTROL

MAIN-SUB

SWITCH

MAIN

RS-232C

CENTER

COMPONENT VIDEO

INPUT

BCR

OUTPUT

YCBC

AUDIO

6 CH. OUTPUT

MIX LINE

INPUT OUTPUT

FRONT SURROUND

SUB2

SUB1

SUB WOOFER

S VIDEO

INPUT

OUTPUT

COMPONENT

VIDEO

OUTPUT

INTERLACE PROGRESSIVE

VIDEO

OUTPUT

Chapter 2: Controls and indicators

2-1 Introduction

This chapter gives description on the front panel buttons, display panel of the player main unit and the provided remote control unit.

This chapter is composed of the following sections.

Front Panel ................................................................ ™

Display ....................................................................... £

Standard Remote Control unit .................................¢

Keyboard Remote Control unit ................................ §

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Chapter 7

Chapter 8

Chapter 2: Controls and indicators

2-2 Front Panel

Display

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

STANDBY indicator

STANDBY

POWER

ON OFF

TEXT DISPLAY TIME DISPLAY RANDOM

1 OPEN/CLOSE button ª

2 DISC FLIP button E

3 EJECT button ª

4 PLUS 1 3 (play), 0 (eject) button º

Chapter 6

Chapter 7

PLUS 2 3 (play), 0 (eject) button º

PLUS 3 3 (play), 0 (eject) button º

5 POWER button •

6 TEXT DISPLAY button Q

MUSIC TYPEUSER FILE SET

DISC SEARCH

DVD indicator

Disc door

VIRTUAL SURROUND indicator

PLUS

PURE AUDIO

DISC

Remote sensor

OPEN/CLOSE

VIRTUAL SURROUND

DISC FLIP

EJECT

192kHzfs 96kHzfs

ENTER

USER FILE button Á

MUSIC TYPE button ˇ

SET button ˇÁ

7 4 button ⁄

Functions as the [cursor left] button in the LIBRARY mode. ∏

¢ button ⁄

Functions as the [cursor right] button in the LIBRARY mode. ∏

8 (pause, still) button ⁄

PLUS 1-3 indicator

Sampling indicators

DV-5900M (96kHz fs/192kHz fs) Other (96kHz fs)

LIBRARY

PURE AUDIO indicator (DV-5900M only)

RETURN

8 LCD remote transmitter

The disc and track title data are output to the LCD remote control unit (provided with a KENWOOD Receiver or optional) through this window.

9 LIBRARY button Á

0 DISC knob ª

Functions as the [cursor up, down] button in the LIBRARY mode. ∏

! RETURN button ∏

Functions as the [return] button in the LIBRARY mode. Note that the function of the RETURN button on the main unit is deactivated in the LIBRARY mode.

Chapter 8

TIME DISPLAY button ﬂ

RANDOM button p

7 (stop) button ⁄

3 ENTER (play, enter) button º

2-3 Display

Chapter 2: Controls and indicators

Chapter 1

2345 6 7 8

MP3 CD VCD DVD DOLBY DIGITAL RANDOM RELAY

FOLDER

P.B.C.

A B PGM

U.FILE M.TYPE

FILE

AUDIO

VIDEO

SEQUENTIAL

DTS MPEG REPEAT A 3 B TOTAL REMAIN

ANGLE

!@ $

1 Operation indicators 2 MP3 indicator

“MP3” lights during playback of an MP3 file.

3 CD indicator º

4 VCD related indicators ‹

5 DVD related indicators

“AUDIO” and “VIDEO” light only with the DV5900M.

ACTIVE PROGRESSIVE

MAIN

SUB D.C.

9 PROGRESSIVE indicators $

0 DVD reverse mode related indicators E

! Character information display

@ SEQUENTIAL indicator ›

Lights in the Sequential mode.

# ANGLE indicator u

$ Time related indicators ﬂ

2-3-1 Switching the Display Brightness

Press the DISP. button on the remote to switch the display brightness in the following sequence.

"Brightness" : The display is permanently displayed

in high brightness.

"Dimmer" : The display is permanently displayed in

low brightness.

"Auto Off" :

The display status becomes as follows.

With a disc containing video, such as DVD or VCD

During playback : Goes Off

During stop: “Brightness” status

Other operation than playback: “Brightness” status for 3 seconds.

With a disc without video, such as CD or MP3

The display remains in the “Brightness” status.

"FL OFF" : The display is turned off.

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

6 Decorder related indicators

7 Special playback related indicator ›wp

8 Daisy Chain function releted indicators W

Chapter 7

Chapter 8

Chapter 2: Controls and indicators

2-4 Standard Remote Control Unit

The buttons with the same names as those on the player main unit have the same functions as the main unit buttons.

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

For DV-5900M

1 Daisy Chain related buttons

MAIN button W

Chapter 6

Chapter 7

Chapter 8

4 5

7 8

SUB 1

MAIN

POWER

LIBRARY

TOP MENU

FOLDER

FILE

MP3

ENTER

DISC SEL.

CHARAC.

UP/DOWN

DISC

RETURN

MODE

SET UP

DISC FLIP

DELETE

RANDOM REPEAT AUDIO

A - B .

D ' E ( F )

GH I J

123

KLM

456

OPQ

789

STU

+100 0 +10

WXY

SPACE

PLUS 1 PLUS 2 PLUS 3

DISP. TIME PGM

REMOTE CONTROL UNIT

RC-D0513

SUB 2

SET

CHARAC.

C /

CHECK

CLEAR

PURE AUDIO

P.B.C.

& *

(

)

PAGESEQ.

SUB 1 button W

SUB 2 button W

2 LIBRARY button Á

3 Cursor buttons ‹°

4 TOP MENU button ‹

FOLDER SEARCH button ∏

5 ENTER button º‹

6 4, ¢ buttons ⁄‹

7 MODE button ªT

8 SET UP button Es

9 DISC FLIP button E

0 RANDOM button p

REPEAT button ›

AUDIO button ﬂ

! PLUS 1 button º

PLUS 2 button º

PLUS 3 button º

CHECK button p

@ Numeric buttons º # POWER button •

$ ON SCREEN button °

% MENU button ‹

FILE SEARCH button ∏ P.B.C. button ‹

^ DISC +, – (DISC up, down) buttons ª & RETURN button ‹°

* SET button ª ( Basic operation related buttons

7 button ⁄ 3 button º 1 button ¤ 8 button ⁄ ¡ button ¤

Character input operation related buttons

DELETE button P SPACE button O CHARAC. button O

) Characters and symbol buttons O

+100 button º +10 button º

Special playback related buttons

DISC SEL. button º DISP. button £ TIME button ﬂ PGM button o CLEAR button p PURE AUDIO button ﬂ SEQ. button › PAGE %, ﬁ buttons ›

The buttons with the same names as those on the player main unit have the same functions as the main unit buttons.

Chapter 2: Controls and indicators

Chapter 1

For DV-5050M/DVF-J6050

SUB 1

LIBRARY

MAIN

POWER

TOP MENU

FOLDER

FILE

MP3

4 5

ENTER

CHARAC.

UP/DOWN

DISC

RETURN

MODE

8 9

SET UP

DISC FLIP

DELETE

RANDOM REPEAT AUDIO

A - B .

D ' E ( F )

DISC SEL.

GH I J

123

KLM

456

OPQ

789

STU

+100 0 +10

WXY

SPACE

PLUS 1 PLUS 2 PLUS 3

DISP. TIME PGM

REMOTE CONTROL UNIT

RC-D0512

SUB 2

SET

CHARAC.

C /

CHECK

CLEAR

SEQ.

1 Daisy Chain related buttons

MAIN button W

SUB 1 button W

SUB 2 button W

2 LIBRARY button Á

3 Cursor buttons ‹°

4 TOP MENU button ‹

P.B.C.

FOLDER SEARCH button ∏

5 ENTER button º‹

6 4, ¢ buttons ⁄‹

7 MODE button ªT

& *

8 SET UP button Es

9 DISC FLIP button E

(

0 RANDOM button p

REPEAT button ›

AUDIO button ﬂ

)

! PLUS 1 button º

PLUS 2 button º

PLUS 3 button º

CHECK button p

@ Numeric buttons º

% MENU button ‹

FILE SEARCH button ∏ P.B.C. button ‹

^ DISC +, – (DISC up, down) buttons ª & RETURN button ‹°

* SET button ª ( Basic operation related buttons

7 button ⁄ 3 button º 1 button ¤ 8 button ⁄ ¡ button ¤

Character input operation related buttons

DELETE button P SPACE button O CHARAC. button O

) Characters and symbol buttons O

+100 button º +10 button º

Special playback related buttons

DISC SEL. button º DISP. button £ TIME button ﬂ PGM button o CLEAR button p SEQ. button ›

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Chapter 7

Chapter 8

# POWER button • $ ON SCREEN button °

Chapter 2

Chapter 2: Controls and indicators

REMOTE CONTROL UNIT RC-KB3

POWER

ALL DATA

READ

DISC FLIP

MAIN

ACTIVE

RETURN

SUB 1

ACTIVE

+10

SUB 2

ACTIVE

LIBRARY

TITLE INPUT

(FL DISP.)

DISPLAY

ON SCREEN

TOP MENU

DELETE

+100

DISC SEL

DISC

DOWN

DISC

374¢

≠=

ENTER

SET

SHIFT

USER

FILE

NAME

SPACE

QWERTYUI OP

ASDFGHJKL

ZXCVBNM

;

! 1

# 3

$ 4

% 5

^ 6

& 7

✱

8 9

()

2-5 Keyboard Remote Control Unit (DV-5900M only)

The buttons with the same names as those on the player main unit have the same functions as the main unit buttons.

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

1 +10 button º

+100 button º

2 DVD operation related buttons

Chapter 6

Chapter 7

Chapter 8

ALL DATA READ button ª

DISC FLIP button E

DISPLAY button £

ON SCREEN button °

TOP MENU button ‹

MENU button ‹

3 POWER button •

4 Character and symbol buttons O

Adjust the keyboard height as required.

678

5 SHIFT button P

6 Daisy Chain related buttons

MAIN ACTIVE button W

SUB 1 ACTIVE button W

SUB 2 ACTIVE button W

7 SPACE button O 8 RETURN button ‹°

9 TITLE INPUT (FL DISP.) button „

LIBRALY button Á

0 Disc selection related buttons

DISC SEL button º DISC DOWN button P DISC UP button P

! Basic operation related button

4, ¢ buttons ⁄‹

3 button ¤

7 button ⁄

@ DELETE button P

# USER FILE NAME button P

$ Entry/setting related buttons

ENTER button º‹

SET button P

% Cursor buttons ‹°

Chapter 3: Basic Operation

Chapter 3 : Basic Operation

3-1 Introduction

This chapter gives description on the basic operations of the control buttons on the player main unit and remote.

This chapter is composed of the following sections.

Configuration of Discs ............................... •

Turning power on ....................................... •

Inserting discs ............................................ ª

In regard to ALL DATA READ mode ............ ª

Operation restriction according to the disc or

player status................................................ º

Playing discs ............................................... º

PLUS1 to PLUS3 slots ................................. º

Playing discs by changing them.................. º

Playing from the selected disc .................... º

Switching the sequential play mode ........... ›

Repeat playback .......................................... ›

Switching the time display.......................... ﬂ

Pure Audio function ................................... ﬂ

Switching the audio language..................... ﬂ

Chapter 1

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Playing discs by selecting the title, chapter, track

or file .......................................................... ⁄

Skipping a track, chapter or file ................. ⁄

Stopping playback ...................................... ⁄

Still picture display and playback pause .... ⁄

Frame-by-frame advance ............................. ⁄

Forward search and reverse search............. ¤

Slow playback and reverse slow playback ... ¤

What is the “normal play TRACK mode”? ... ¤

Menu playback of DVD ............................... ‹

Menu playback of P.B.C.-compatible VCD .. ‹

Switching still pictures of DVD AUDIO ...... ›

Chapter 6

Chapter 7

Chapter 8

Chapter 3: Basic Operation

3-2 Configuration of Discs

Chapter 1Chapter 2Chapter 3Chapter 4Chapter 5

DVD AUDIO disc configuration (DV-5900M only)

DVD AUDIO

Group 1

Track 1

Index 1

22 3 4 5

The group is the largest unit composing the music in an DVD AUDIO disc. Each group is composed of multiple tracks, and each track is composed of multiple indices.

DVD VIDEO disc configuration

DVD VIDEO

Title 1

Group 2

Track 1

Title 2

3-3 Turning power on

MP3 disc configuration

MP3

Folder 1

File 1

22 3 4 n 2n+3n+2

Folder 2

File n+1

Configuration of MP3 discs

The folder is the storage unit at the highest level in the disc. Sometimes a single folder contains more than one file, or sometimes files are recorded directly in the disc in place of being included in a folder. Some discs also have a hierarchical structure in which a folder includes sub-folders. Note that the file numbers are not assigned on a per-folder basis but they are assigned consecutively for all the files in the whole disc.

Operation procedure

1. If preparation of the TV is required :

Set the input selector of the TV to monitor the video output from this unit.

If preparation of the AV amplifier is required :

Set the input selector of the AV amplifier to monitor the audio output from this unit.

2. Press the POWER button on the player.

When the power of the player is in the standby mode, press the POWER button on the remote.

÷ When power is switched on, the unit starts

detection of discs in the stocker (“DETECTION” is displayed during this).

When discs have been detected, the unit automatically reads TOC on discs (“READING” is displayed during this) then starts playback.

÷ When no disc has been detected, the display shows

“NO DISC”.

Chapter 1

22 3 4 5 22

The title is the largest unit composing the music and/or pictures in an DVD VIDEO disc. Each title

Chapter 6

is composed of multiple chapters.

CD and VCD disc configuration

CD and VCD

Chapter 7

Track 1

Chapter 8

Chapter 1

[To put the player power in the standby mode]

÷ When the power is on, press the POWER button on the

remote. The "STANDBY" indicator lights up to indicate that the player is in the standby mode of power.

[To turn the player off]

÷ When the power is on or standby, press the POWER

button on the player to turn it off.

22 3 4 5

Chapter 3: Basic Operation

Chapter 1

3-4 Inserting discs

Up to 403 discs can be loaded in the stocker. Disc exchange also is possible during playback.

The discs can be changed during playback without stopping the currently played disc.

Be sure to operate a button when opening/closing the disc door or rotating the stocker. Never attempt to move the stocker with your hand. Never let your hand or any object enter inside the unit.

Operation procedure

1. Press the OPEN/CLOSE button on the player main

unit to open the disc door. (Pressing the button again closes the disc door.)

This unit cannot play back 8 cm discs. Do not attempt to play an 8 cm disc for this may result in malfunction.

÷ Place the disc to be played along the groove on the

slot.

÷ Do not insert more than one disc in a slot.

÷ When handling a disc, take care not to touch the

disc surface.

3. Insert the disc vertically.

÷ Insert it so that the side to be played back faces

leftward.

disc label side

Stocker

4. Repeat 2 and 3 to insert discs.

5. Press the OPEN/CLOSE button on the player to close

the disc door. ÷ When the disc door closes :

The unit starts detection of discs in the stocker (“DETECTION” is displayed during this).

Ejecting the disc

Operation procedure

1. Turn the DISC knob on the main unit to select a disc.

3-5 In regard to ALL DATA READ mode

The disc information for all discs will be read. We recommend to execute this mode before playback after discs have been exchanged.

Close the disc door before operation.

Operation procedure (remote)

1. Press the MODE button.

2. Press the DISC +(up), – (down) button, then select

“ALL DATA READ”.

3. Press the SET button.

÷ To display the title on a LCD remote control unit

(provided with a KENWOOD Receiver or optional), perform the all data read operation first, and operate the LCD remote control unit with the disc door closed. For the operation of the LCD remote control unit, refer to the instruction manual provided with your receiver or LCD remote control unit.

÷ If you are operating the keyboard remote, press the

ALL DATA READ button. (DV-5900M only)

÷ To quit ALL DATA READ mode, Press the 7 button.

Chapter 2

Chapter 3

Chapter 4

Chapter 5

Chapter 6

÷ Please do not use discs which are not round

because they may cause malfunction.

2. Turn the DISC knob and bring the slot with the disc

to be placed to the front.

÷ If you are operating the remote, press the DISC

+(up), – (down) button.

2. Press the EJECT 0 button.

When “REMOVE DXXX” is displayed :

A disc is inserted in the slot with the same disc number as the disc being loaded. It is not permitted to insert another disc in a slot from which the disc has been loaded. Remove the inserted disc and insert it in an idle slot.

Chapter 7

Chapter 8

+ 67 hidden pages