Kenwood DPC-782, DPC-981, DPC-781 User Manual

Playback from the first track

D.A.S.C B.BOOST

DPC-981/782/781 (En/M)

OPEN

PGM SHUF B.BOOST

D.A.S.C.

P.MODE/

1 2

REPEAT

8888

Connect headphones.

PHONESREMOTE

• Accepts the supplied headphones, or other optional headphones with a mini plug.

• The REMOTE terminal can be used only when the unit has headphones with remote controller. (See“Accessories”.)

Make sure the HOLD switch has been

released.

HOLD

PHONESREMOTE

• Release the HOLD switch when performing an operation.

Open the top cover.

Place a disc.

Place with labeled side up.

Close the top cover.

• Press down on the central front portion of the lid until it clicks.

Start playback.

D.A.S.C.

H

D.A.S.C.

Volume display

Elapsed time of the track

Track number

• The power comes ON and playback begins.

Adjust the volume.

To decrease volume

To increase volume

VOLUME

• When listening through headphones with remote controller, set the volume of the main unit to around 40 and adjust with the volume control of the remote controller.

The letter written on the hand in each illustration accompanying the text indicates the position of the pressed key on the unit.

Skip (4, ¢) keys

Press either key to skip tracks.

P.MODE/SEARCH (Play mode/Search) key

Press when using the program playback function or press together with one of the Skip keys to initiate the fast forward or fast reverse operation.

REPEAT key

Press for using various playback features.

Play/pause (38) key

Press to play a disc, pause playback or switch power ON.

Stop/off (7) key

Press to stop the disc, turn power OFF or recharge the unit.

OPEN key

Use to open the top lid.

D.A.S.C. (Digital Anti Shock Circuit) key

OLLE

500

Press to switch the Digital Anti-Shock Circuit which prevents sound from skipping.

B.BOOST (Bass Boost) key

Press to activate low-frequency compensation. This does not operate with connection at the LINE OUT terminal.

VOLUME control

Turn to adjust the listening level. This does not operate with connection at the LINE OUT terminal.

HOLD switch

Use to turn the hold function on/off.

REMOTE/PHONES (Remote/headphones) jack

DC IN (External DC power input jack) jack

LINE OUT jack

Notes

Optical Output jack (OPT.OUT) (For CHINA and Duty Free Shop in JAPAN)

How to connect the DPC-781 to a digital recording component through the OPT. OUT jack.

1 Connect the DPC-781 to the household AC power supply through the

provided AC adaptor and play the DPC-781.

2 Set the D.A.S.C.to OFF. 3 Put the DPC-781 to pause mode. 4 Set the digital recording component ready for recording. 5 Start recording on the digital recording component. 6 Restart playback of the DPC-781.

• Secure the disc by pushing a position near the center hole until it clicks.

To pause playback temporarily To stop playback To turn power OFF

After stopping playback, press the 7 key again.

D.A.S.C.

• When the 38key is pressed during playback, it pauses temporarily. Pressing the key again resumes playback.

500

Blinks.

• The total number of tracks and the total playing time of them will be displayed.

D.A.S.C.

3284

Auto power-Off function

If no operation key has been pressed for 3 minutes while the unit is in the stop mode, the power is turned OFF automatically to prevent battery power consumption.

Skipping to or searching a desired track

Track selection by track skip

To skip backward

• The same number of tracks as the times the key is pressed can be skipped.

• When the 4 key is pressed once during playback, the played position returns to the beginning of the current track being played.

Fast forward, fast reverse

Perform the following procedure during playback.

1 Press the P.MODE/SEARCH key.

D.A.S.C.

P.MODE/ SEARCH

• Go to the next step within 5 seconds.

To skip forward

FFbF

Various playback features

Pressing the REPEAT key in the play or stop mode allows you to enjoy various playback features.

Press the REPEAT key.

Each press switches the repeat modes as follows.

1 Cancelled position

Returns to the normal play mode.

2 One-track repeat

The track being played or selected track will be played repeatedly.

3 All-track repeat

All tracks on the disc will be played repeatedly.

4 Shuffle play

All tracks on the disc will be played in a random order.

REPEAT

Changing the tone

DPC-981/782/781 (En/M)

Compensation of low frequencies

The low frequencies sound which is felt in headphone can be boosted.

D.A.S.C.

FFO

EUO

LLA

SHUF

FUHS

Each press of the key switches the mode as follows.

1 Bass Boost 1

Low frequencies are boosted.

2 Bass Boost 2

Low frequencies are boosted more than Bass Boost 1.

3 Bass Boost OFF

Normal tone reproduction. Indicator goes off.

Hold facility

B.BOOST

D.A.S.C.

B.BOOST

Goes off.

3284

328401

3284

2 Press the 4 or ¢ key.

Hold the key pressed during playback.

Fast reverse

Fast foward

• Playback resumes from the position where the key is released.

• The REPEAT key may sometimes be invalid if it is pressed near the end of a track. In this case, press the REPEAT key after playback of the current track has completed.

• In case shuffle play is selected during playback, the playback of the selected mode starts after the current track being played has completed.

• The repeat of 2 or 3 above stops after 16 times of repeats.

Programming tracks in desired order

Desired tracks can be played in the desired order.

Preparations

• Enter the stop mode by pressing the 7 key while playback.

Press the P.MODE/SEARCH key.

P.MODE/ SEARCH

D.A.S.C.

PGM



Lights.

Select the desired track numbers in

the order you want to play them.

1 Select a track...

To skip backward

D.A.S.C.

PGM

To skip forward

Programmed order

Track number blinks during selection.

2 And enter it.

P.MODE/

• Select other tracks in the desired order by repeating 1 and 2

• Up to 32 tracks can be programmed at a time.

above.

Start playback.

10_P

To change a programmed content

1 Ensure that the unit is in stop mode.

2 Display the content to be changed.

P.MODE/ SEARCH

• Press the P.MODE/SEARCH key repeatedly until the programmed order containing the track number to be changed is displayed.

3 Change the track number.

(1) Select a track...

To skip backward

(2) And enter it.

P.MODE/ SEARCH

Note on the key operation

The operation keys of the main unit except for the volume control are defeated. This position prevents undesired operation when the unit is put in a bag, etc.

Set to the left side.

HOLD

• Be sure to release the switch before performing any operations. Operations cannot be performed if it is in the HOLD position.

To check the programmed contents

1 Ensure that the unit is in stop mode.

2 Press the P.MODE/SEARCH key.

PGM

D.A.S.C.

Track number

Programmed order

40_P

• Each press of the P.MODE/SEARCH key displays the next track number in the programmed order.

P.MODE/ SEARCH

D.A.S.C.

Track number

Programmed order

40_P

To clear the program

1 Enter the stop mode.

1 Ensure that the unit

is in stop mode.

To skip forward

PGM

D.A.S.C.

40_P

2 Press the 7 key.

D.A.S.C.

PGM

10_P

3284

PGM

D.A.S.C.

40_P

Press once

• Opening the lid cancels the program.

+ 4 hidden pages