• Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from
<http://www.kenwood.com/cs/ce/>.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or
service on the product.
Model DDX8905S/ DDX6905S/ DDX6705S/ DMX7705S Serial number
US Residence Only
Register Online
Register your KENWOOD product at www.kenwood.com/usa/
About this Unit ....................................................... 104
3English
Before Use
Before Use
Precautions
# WARNINGS
Ñ To prevent injury or fire, take
the following precautions:
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any extended
period.
• If you experience problems during installation,
consult your KENWOOD dealer.
Ñ Precautions on using this unit
• When you purchase optional accessories,
check with your KENWOOD dealer to make
sure that they work with your model and in
your area.
• You can select language to display menus,
audio file tags, etc. See User Interface Setup (P. 74).
• The Radio Data System or Radio Broadcast
Data System feature won’t work where the
service is not supported by any broadcasting
station.
• The unit may not function properly if the
connectors between the unit and front panel
are dirty. Detach the front panel and clean the
connector with a cotton swab gently, being
careful not to damage the connector.
Ñ Protecting the monitor
• To protect the monitor from damage, do not
operate the monitor using a ball point pen or
similar tool with the sharp tip.
Ñ Cleaning the unit
• If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth. If
the faceplate is stained badly, wipe the stain
off with a cloth moistened with neutral cleaner,
then wipe it again with a clean soft dry cloth.
NOTE
• Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the faceplate
with a hard cloth or using a volatile liquid such
as thinner or alcohol may scratch the surface or
erase screened print.
Ñ Lens fogging
When you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the disc player of the unit. Called
lens fogging, this condensation on the lens
may not allow discs to play. In such a situation,
remove the disc and wait for the condensation
to evaporate. If the unit still does not operate
normally after a while, consult your KENWOOD
dealer.
Ñ Precautions on handling discs
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull them
out horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with
a ballpoint pen etc.
• Discs that are not round cannot be used.
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
4
Before Use
• This unit can only play the CDs with
.
• This unit may not correctly play discs which do
not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process see your
writing software, and your recorder instruction
manual.)
Ñ Acquiring GPS signal
The first time you turn on this unit, you must
wait while the system acquires satellite signals
for the first time. This process could take up
to several minutes. Make sure your vehicle
is outdoors in an open area away from tall
buildings and trees for fastest acquisition.
After the system acquires satellites for the first
time, it will acquire satellites quickly each time
thereafter.
Ñ Caution for Smartphone Users
Simultaneously running multiple applications
on your smartphone while screen sharing places
heavy demand on the microprocessor of the
phone, potentially affecting communication and
performance.
For best results while pairing with your Kenwood
receiver, please be sure to close any unused
applications by performing the following steps:
Android operating system example:
• Turn off WiFi in phone settings menu.
• Close all open applications before connecting
for in-car use. Hold the <Home> key and select
<Close all> to close all open applications.
• Clear RAM Memory of the Android phone
before connecting for in-car use. Hold the
<Home> key and select <Task Manager> then
select <RAM> then select <Clear memory> to
clear current memory processes.
How to read this manual
• The screens and panels shown in this manual are
examples used to provide clear explanations of the
operations.
For this reason, they may be different from the actual
screens or panels used, or some display patterns may
be different.
• Indication language: English indications are used
for the purpose of explanation. You can select the
indication language from the [SETUP] menu. See
User Interface Setup (P.74).
<Home> Key
5English
Basic Operations
8
Basic Operations
Functions of the Buttons on the Front Panel
DDX8905S
1234567
DMX7705S
1294563
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
NumberNameMotion
Remote
1
Sensor
S, R
2
(Volume)
CAM• Switches view camera display on/off. (P. 69)
3
HOME• Displays the HOME screen (P.11).
4
MENU• Displays the popup menu screen.
5
6
• Receives the remote control signal.
• Adjusts volume.
The volume will go up until 15 when you keep pressing R.
– The camera whose view is displayed first changes according to the "Camera
Setup" setting and the shift lever position in the shift gate.
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Pressing for 1 second switches attenuation of the volume on/off. (DDX8905S only)
• Displays the APP (CarPlay/ Android Auto/ WebLink) screen.
• Pressing for 1 second displays the Voice Recognition screen (P.65).
6
Basic Operations
NumberNameMotion
G
7
Disc insert
8
slot
AT T• Switches attenuation of the volume on/off.
9
• Displays the Angle Adjust screen.
– [DISC E JECT]: Ejects the disc.
• When the panel is opened, pressing closes the panel.
• To forcibly eject the disc, press it for 2 seconds and touch [Yes ] after the message is
displayed.
• A slot to insert a disc media. (DDX8905S only)
DDX6905S/ DDX6705S
21
3
4
5
6
7
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
NumberNameMotion
Remote
1
Sensor
Disc insert
2
slot
3
S, R
4
(Volume)
5
6
7
• Receives the remote control signal.
• A slot to insert a disc media.
• Displays the HOME screen (P.11).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Adjusts volume.
The volume will go up until 15 when you keep pressing R.
• Switches view camera display on/off. (P. 69)
– The camera whose view is displayed first changes according to the "Camera
Setup" setting and the shift lever position in the shift gate.
• Displays the popup menu screen.
• Pressing for 1 second switches attenuation of the volume on/off.
• Displays the APP (CarPlay/ Android Auto/ WebLink) screen. Pressing this switch each
time toggles between current source screen and APP screen.
• Pressing for 1 second displays the Voice Recognition screen (P.65).
7English
Basic Operations
Turning on the Unit
The method of turning on is different
depending on the model.
DDX8905S/ DMX7705S
1
Press the [HOME] button.
DDX6905S/ DDX6705S
Press the [
The unit is turned on.
● To turn off the unit:
DDX8905S/ DMX7705S
1
Press the [HOME] button for 1 second.
DDX6905S/ DDX6705S
Press the [
NOTE
• If it is your first time turning the unit on after
installation, it will be necessary to perform Initial
setup (P. 8).
] button.
] button for 1 second.
Initial Settings
Initial setup
Perform this setup when you use this unit first
time.
Set each item as follows.
1
■ [Language]
Select the language used for the control
screen and setting items. Default is “American
English (en)”.
For detailed operation, see User Interface
Setup (P.74).
■ [Clock]
Sets the synchronization of the clock and
adjusts it.
For detailed operation, see Calendar/clock settings (P.9).
■ [Display]
Set the button illumination color.
If it is hard to see the image on the screen
even, adjust the viewing angle.
1Touch [Display].
2Touch [Key Color].
3Select the desired color.
4Touch [
5Touch [Viewing Angle].
6Select an angle
7Touch [
For detailed operation, see Display Setup
(P. 75).
].
].
].
8
Basic Operations
■ [Camera]
Set the parameters for the camera.
1Touch [Camera].
2Set each item and touch [
For detailed operation, see Camera Setup
(P. 69).
■ [OEM SETUP]
This function requires a commercial adaptor.
Consult your KENWOOD dealer for details.
■ [DEMO]
Set the demonstration mode. Default is “ON”.
1Touch [DEMO] and set ON or OFF.
Touch [Finish].
2
NOTE
• These settings can be set from the SETUP menu.
See Setting Up (P.73).
].
Touch [User Interface].
3
User Interface screen appears.
Touch [Time Zone] in the User Interface
4
screen.
Select the time zone.
5
Set each item as follows.
6
Scroll the page to show the item.
Calendar/clock settings
DDX8905S/ DMX7705S
1
Press the [MENU] button.
DDX6905S/ DDX6705S
Press the [
Popup menu appears.
Touch [SETUP].
2
SETUP Menu screen appears.
] button.
■ [Clock]
DDX8905S
[GPS-SYNC ](Default): Synchronizes the clock
time with the GPS.
DDX6905S/ DDX6705S/ DMX7705S
[RDS-SYNC ](Default): Synchronizing the
Radio Data System station time data and
this unit’s clock.
[Manual]: Sets the clock manually.
■ [Time Zone]
Select the time zone.
■ [Clock Adjust]
If you select [Manual] for Clock, adjust the
date and time manually. (P. 74)
NOTE
• Please set the date and time. If it is not set, it may
not work with some functions.
9English
Basic Operations
Adjusting the volume
To adjust the volume (0 to 40),
Press [R] to increase, and press [S] to decrease.
Holding [R] increases the volume continuously
to level 15.
DDX8905S/ DMX7705S
DDX6905S/ DDX6705S
Monitor Angle Control
(DDX8905S)
You can adjust the position of the monitor.
Press the [G] button.
1
Angle Adjust screen appears.
Touch screen operations
To perform operations on the screen, you need
to touch, touch and hold, flick or swipe to
select an item, display setting menu screen or
to change the page, etc.
● Touch
Touch the screen gently to
select an item on the screen.
● Touch and hold
Touch the screen and keep
your finger in place until
the display changes or a
message is displayed.
● Flick
Slide your finger quickly
to the left or right on the
screen to change the page.
You can scroll the list screen
by flicking the screen up/
down.
● Swipe
Slide your finger up or down
on the screen to scroll the
screen.
Select a below number that represents
2
your desired angle setting.
Default is “0”.
■ [Off Position]
You can store the current monitor angle as
the angle during power off. Touch [Memory]
when the desired angle is selected.
10
Basic Operations
HOME screen descriptions
Most functions can be performed from the
HOME screen.
123
4
5
67
• Displays the control screen of current source.
1
• The artwork is displayed if available from
current content.
• Widget
2
– You can change the widget by touching
[
]/[ ] or flicking left or right on the
widget area.
– Touch the widget to display the detailed
screen.
• Page indication for widgets
3
• Current source information
4
• Displays the source selection screen. (P.12)
5
• Short-cut playback source icons (P. 13)
6
• Displays the Hands Free screen. (P. 64)
7
• When connecting as Apple CarPlay or
Android Auto, it works as a phone provided
in Apple CarPlay or Android Auto.
Display the HOME
DDX8905S/ DMX7705S
1
Press the [HOME] button.
DDX6905S/ DDX6705S
Press the [
HOME screen appears.
] button.
11English
Basic Operations
Source selection screen
descriptions
You can display all playback sources and
options on the source selection screen.
1
35
• Changes the playback source.
1
For playback sources, see P.12.
2
• Changes the page. (Touch [ ]/[ ].)
You can also change the page by flicking left
or right on the screen.
• Returns to previous screen.
3
• Page indication
4
• Displays the SETUP Menu screen. (P. 73)
5
Select the playback source
Touch [] on the HOME screen.
1
From the screen, you can select the
following sources and functions.
• Switches to the Android Auto/ Apple
CarPlay screen from the connected
iPhone/Android device.*1 (P. 22)
4
• Plays a Bluetooth audio player. (P. 58)
• Plays a disc. ( P.16) *
2
• Plays an iPod/iPhone. (P. 33)
• Plays files on a USB device. ( P.30)
• Switches to the Pandora. (P. 26)
• Switches to the Spotify. (P. 28)
• Switches to an external component
connected to the AV-IN input terminal.
(P. 71)
• Displays the WebLink screen. (P. 25)
• Displays the Waze screen. (P. 25)
• Displays the Audio screen. (P. 78)
• Puts the unit in standby. (P. 13)
4
• For sources and information displayed when
an ADS adapter is connected, see OEM Features Operation (P.72).
1
*
When iPhone compatible with CarPlay is
connected, [Apple CarPlay] is displayed.
When an Android device compatible with
Android Auto is connected, [Android Auto] is
displayed.
2
*
DDX8905S only
3
*
DDX6905S/ DDX6705S/ DMX7705S only
4
*
DDX8905S/ DDX6905S/ DDX6705S only
12
• Switches to the HD Radio broadcast.
2
(P. 39) *
• Switches to the Radio broadcast.
3
(P. 36) *
• Switches to the SiriusXM® satellite radio
broadcast. (P. 46)
Basic Operations
To select the playback source on the
HOME screen
The 3 items displayed on the source selection
screen as the large icons are shown on the
HOME screen.
You can change items displayed on this area
by customizing the source selection screen.
(P. 13)
To select the playback source on the
source control screen
Put the unit in standby
Touch [] on the HOME screen.
1
Touch [STANDBY].
2
Customize Short-cut buttons on
HOME screen
You can arrange the position of the source
icons as you like.
Touch [] on the HOME screen.
1
Touch and hold the icon which you want
2
to move to go into the customizing
mode.
Drag it where you want to move.
3
Display source selection buttons by touching
[ ]/[ ] or flicking left or right on the source
control screen, then select a playback source.
Changes the page
13English
Basic Operations
Source control screen
descriptions
There are some functions which can be
operated from most screens.
Indicators
1
234
Short-cut buttons
1
• Connected Bluetooth device information.
: Lights up when quick charging battery
•
of the connected iPod/ iPhone/ Smartphone.
2
All sources icon
Displays all sources.
3
Secondary screen
• [
]/[ ] : The Secondary screen changes every
time you touch it. You can also change the
Secondary screen by flicking left or right on
the screen.
• Indicators: Displays the current source
condition and so on.
– [AT T]: The attenuator is active.
– [DUAL]: The dual zone function is on.
– [MUTE]: The mute function is active.
– [LOUD]: The loudness control function is on.
• Short-cut buttons: The source changes to the
one you have set as a short-cut. For the shortcut setting, refer to Customize Short-cut buttons on HOME screen (P.13).
4
[Û]
Touch to display the Hands Free screen. (P. 64)
When connecting as Apple CarPlay or Android
Auto, it works as a phone provided in Apple
CarPlay or Android Auto.
Popup menu
DDX8905S/ DMX7705S
1
Press the [MENU] button.
DDX6905S/ DDX6705S
Press the [
Popup menu appears.
Touch to display the popup menu.
2
DDX8905S/ DMX7705S
DDX6905S/ DDX6705S
] button.
14
Basic Operations
The contents of the menu are as follows.
• Displays the Screen Adjustment screen.
(P. 73)
• Turns the display off. (P. 15)
• Displays the view camera. (P.69)
• Displays the SETUP Menu screen.
(P. 73)
• Displays the Audio screen. (P. 78)
• Displays the control screen of current
source. Icon feature differs depending on
the source.
• Close the popup menu.
• See HOME screen descriptions (P. 11).
• See HOME screen descriptions (P. 11).
DDX8905S/ DMX7705S only
• Ejects the disc.
• To forcibly eject the disc, press it for
2 seconds and touch [Ye s] after the
message is displayed.
DDX6905S/ DDX6705S only
Turn off the screen
Select [Display OFF] on the popup menu.
1
● To turn on the screen
Touch the display.
1
List screen
There are some common function keys in the
list screens of most sources.
612
345
1
Displays list type selection window.
2
Displays music/movie file list.
3
Text scroll
Scrolls the displayed text.
4
etc.
Keys with various functions are displayed here.
•
: Plays all tracks in the folder containing
the current track.
•
: Jump to the letter you entered
(alphabet search).
•
: Moves to the upper hierarchy.
5
[] / [] / [] / [] Page scroll
You can change the page to display more items
by pressing [
• [
]/[] : Displays the top or bottom page.
6
Return
Returns to previous screen.
NOTE
• Buttons which cannot be activated from the list
screen are not displayed.
]/[].
15English
Disc
Disc
(DDX8905S/DDX6905S/DDX6705S)
Playing a disc
DDX8905S
Ñ Insert a disc
Press the [G] button.
1
Touch [DISC EJECT].
2
The panel opens.
Insert the disc into the slot.
3
The panel closes automatically.
The unit loads the disc and playback
starts.
DDX6905S/ DDX6705S
Ñ Insert a disc
Insert the disc into the slot.
1
The unit loads the disc and playback
starts.
Ñ Eject a disc
Press the [ ] button.
1
Touch [G].
2
Ñ Eject a disc
Press the [G] button.
1
Touch [DISC EJECT].
2
When removing a disc, pull it horizontally.
Press the [G] button.
3
16
When removing a disc, pull it horizontally.
NOTE
• This is not displayed on the popup menu screen
of Apple CarPlay or Android Auto source. Change
Apple CarPlay or Android Auto source to other
one to display the popup menu screen.
Disc
DVD/ VCD Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote control mode switch to DVD
mode before starting operation for DVD and VCD,
see Switch the operation mode (P.85).
• The screen shot below is for DVD. It may be
different from the one for VCD.
When the operation buttons are not
1
displayed on the screen, touch the 7
area.
Control screen
1
2
3
Video screen
6
7
1
Information display
Displays the following information.
• Title #, Chapter #: DVD title and chapter
number display
• Track #/Scene #: VCD track or scene number
display. Scene # is displayed only when
Playback control (PBC) is on.
• Linear PCM, etc.: Audio format
• [Hide]: Hides the control screen.
• [
] : Repeats the current content. Each time
you touch the key, repeat mode switches in
the following sequence;
DVD: Title repeat (
(
), Repeat off ( )
VCD (PBC On): Does not repeat
VCD (PBC Off ): Track repeat (
(
)
), Chapter repeat
), Repeat off
2
Function panel
Touch on the left side of the screen to display
the function panel. Touch again to close the
panel. For details on the keys, see Function panel (P.18).
3
Play mode indicator/ Playing time
• D, B, I, etc.: Current play mode indicator
The meanings of each icon are as follows;
D (play), B (fast forward),
A (fast backward), I (stop),
H (pause), (slow playback),
(slow reverse playback).
4
Operation keys
• [E][F] : Searches the previous/next
content.
Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• [DH] : Plays or pauses.
• [
] : Displays the Graphic Equalizer screen.
4
5
8
6
(P. 80)
5
Indicator Items
• [IN]: A disc is inserted.
White: A Disc is inside the unit.
Orange: Error at the disc player
VCD
• [1chLL/2chLL]: Identifies the left audio output
of channel 1 or 2.
• [1chLR/2chLR]: Identifies the monaural audio
output of channel 1 or 2.
• [1chRR/2chRR]: Identifies the right audio
output of channel 1 or 2.
• [1chST/2chST]: Identifies the stereo audio
output of channel 1 or 2.
• [LL]: Identifies the left audio output.
• [LR]: Identifies the monaural audio output.
• [RR]: Identifies the right audio output.
• [ST]: Identifies the stereo audio output.
• [PBC]: The PBC function is on.
• [VER1]: The VCD version is 1.
• [VER2]: The VCD version is 2.
6
Searching area
Touch to search the next/previous content.
7
Key display area
Touch to display the control screen.
R
(resume stop),
17English
Disc
8
[MENU CTRL] (DVD only)
Touch to display the DVD-VIDEO disc menu
control screen. See DVD Disc Menu Operation (P. 20).
NOTE
• The control screen disappears when no operation
is done for 5 seconds.
• If you use a remote control, you can jump directly
to the desired image with entering the chapter
number, scene number, play time, etc. (P. 86).
Ñ Function panel
Touch [ ] on the left side of the screen.
1
DVDVCD
The functions of each key are as follows.
[I]
Stops playback. When touched twice, the disc is
played from the beginning when you play it the
next time.
[
] []
Fast forward or fast backward. Each time you
touch the key, the speed changes; 2 times, 8
times.
[
] or [] (DVD only)
Plays in slow motion forward or backward.
[SETUP] (DVD only)
Touch to display the DVD SETUP screen. See
DVD Setup (P.21).
[MENU CTRL] (DVD only)
Touch to display the DVD-VIDEO disc menu
control screen. See DVD Disc Menu Operation (P. 20).
[PBC] (VCD only)
Turn Playback control (PBC) on or off.
[Audio] (VCD only)
Change the audio output channel.
18
Music CD/ Disc media Basic
Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation for Music CD
and audio files, see Switch the operation mode (P. 85).
• In this manual, “Music CD” will be referred to as
the general CDs which include music tracks in.
“Disc media” will be referred to as CD/DVD disc
which includes audio or video files.
• The screen shot below is for disc media. It may be
different from the one for CD.
Control screen
1
7
4
3
Open the drawer
4
1
CODEC /[] / []
• When a high-resolution source is played, its
format information is displayed. (Disc media
only)
• [
] : Repeats the current track/folder. Each
time you touch the key, repeat mode switches
in the following sequence;
Track/ File repeat ( ), Folder repeat ( )
(Disc media only), Repeat all ( )
• [
] : Randomly plays all tracks in current
folder/disc. Each time you touch the key,
random mode switches in the following
sequence;
Track random ( ) (Music CD only), Folder
random ( ) (Disc media only), Random off
( )
2
5
6
5
Disc
2
Track information
Displays the information of the current track/ file.
Only a file name and a folder name are displayed
if there is no tag information. (Disc media only)
3
Operation keys
• [1] (Disc media only) : Searches file. For
details on search operation, see File search Operation (P.19).
• [E][F] : Searches the previous/next
content.
Touch and hold to fast forward or fast
backward. (It will be cancelled automatically
after about 50 seconds.)
• [DH] : Plays or pauses.
• [
] : Displays the Graphic Equalizer screen.
(P. 80)
4
Function panel (Disc media only)
Touch on the left side of the screen to display
the function panel. Touch again to close the
panel.
• [
][] : Searches previous/next folder.
5
Content list
• Touch on the right side of the screen to display
the Content list. Touch again to close the list.
• Displays the playing list. When you touch a
track/file name on the list, playback will start.
6
Indicator Items
• [IN]: A disc is inserted.
White: A Disc is inside the unit.
Orange: Error at the disc player
• [VIDEO]: Identifies the video file.
• [MUSIC]: Identifies the music file.
7
Artwork (Disc media only)
/Play mode indicator/ Playing time
• The jacket of the currently playing file is
displayed.
• D, B, etc.: Current play mode indicator
The meanings of each icon are as follows; D
(play), B (fast forward), A (fast backward),
H (pause).
Video screen
9
8
Searching file area (Video file only)
Touch to search the next/previous file.
9
Key display area (Video file only)
Touch to display the control screen.
File search Operation
(Disc media only)
You can search a file according to hierarchy.
NOTE
• For operations in the list screen, see List screen
(P. 15).
Touch [1].
1
Folder List screen appears.
Touch the desired folder.
2
When you touch a folder its contents are
displayed.
Touch desired item from the content list.
3
Playback starts.
88
19English
Disc
DVD Disc Menu Operation
You can set up some items in the DVD-VIDEO
disc menu.
Touch illustrated area during playback.
1
Menu Control screen appears.
Perform desired operation as follows.
2
■ Displays the top menu
Touch [TOP].*
■ Displays the menu
Touch [MENU].*
■ Displays the previous menu
Touch [Return].*
■ Enters selected item
Touch [Enter].
■ Enables direct operation
Touch [Highlight] to enter the highlight
control mode (P. 20).
■ Moves the cursor
Touch [R], [S], [C], [D].
■ Switches the subtitle language
Touch [Subtitle]. Each time you touch this
key, language is switched.
■ Switches the audio language
Touch [Audio]. Each time you touch this key,
language is switched.
■ Switches the picture angle
Touch [Angle]. Each time you touch this key,
picture angle is switched.
* These keys may not function depending on
the disc.
Ñ Highlight control
Highlight control lets you control the DVD
menu by touching the menu key directly on
the screen.
Touch [Highlight] in the Menu Control
1
screen.
Touch desired item on the screen.
2
NOTE
• The highlight control is cleared automatically if
you do not operate for a constant time.
20
Disc
DVD Setup
You can set up the DVD playback functions.
Touch illustrated area during playback.
1
Touch [ ] on the left side of the screen.
2
Touch [SETUP].
DVD SETUP screen appears.
Set each item as follows.
3
■ [Screen Ratio]
Sets the screen display mode.
[16:9 ](Default): Displays wide pictures.
[4:3 LB]: Displays wide pictures in the Letter
Box format (having black stripes at the top
and bottom of screen).
[4:3 PS]: Displays wide pictures in the Pan &
Scan format (showing pictures cut at the
right and left ends).
Ñ Language setup
This setting is for the language used in the
menu, subtitle, and voice.
For language code, refer to DVD Language
Codes (P.101).
Sets the entered language and returns to
the DVD Setting screen.
■ [
Menu Language] / [Subtitle Language]
/ [Audio Language]
See Language setup (P.21).
■ [Dynamic Range Control]
Sets the dynamic range.
[Wide]: The dynamic range is wide.
[Normal]: The dynamic range is normal.
[Dialog] (Default): Makes the total sound
volume larger than other modes. This is
effective only when you are using Dolby
Digital software.
NOTE
• To set the DVD’s original language for audio
language, touch [Original].
21English
APPS—Android Auto™/Apple CarPlay
APPS—Android Auto™/Apple CarPlay
Apple CarPlay Operation
CarPlay is a smarter, safer way to use your
iPhone in the car. CarPlay takes the things
you want to do with iPhone while driving and
displays them on the screen of the product.
You can get directions, make calls, send and
receive messages, and listen to the music
from iPhone while driving. You can also use
Siri voice control to make it easier to operate
iPhone.
For details about CarPlay, visit https://ssl.
apple.com/ios/carplay/.
Compatible iPhone devices
You can use CarPlay with the following iPhone
models.
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
Ñ Preparation
Connect iPhone using KCA-iP103 via USB
1
(Black) terminal. (P. 95)
When iPhone compatible with CarPlay is
connected to the USB (Black) terminal, the
Bluetooth Hands-Free phone currently
connected is disconnected.
Unlock your iPhone.
2
Ñ Operation buttons and
available Apps on the home
screen of CarPlay
You can use the Apps of the connected iPhone.
The items displayed and the language used
on the screen differ among the connected
devices.
To enter CarPlay mode, touch [Apple CarPlay]
icon in the source selection screen. (P. 12)
2
1
1
[]
• Displays the home screen of CarPlay.
• Touch and hold to activate Siri.
2
Application buttons
Starts the application.
3
[HOME]
Exits the CarPlay screen and displays the Home
screen.
To exit the CarPlay screen
DDX8905S/ DMX7705S
1
Press the [HOME] button.
DDX6905S/ DDX6705S
Press the [
] button.
3
22
APPS—Android Auto™/Apple CarPlay
Ñ Use Siri
You can activate Siri.
Press the [] button for 1 second.
1
DDX8905S/ DMX7705S
Press for 1 second
DDX6905S/ DDX6705S
Press for 1 second
Talk to Siri.
2
To deactivate
Press the [] button.
1
Ñ Switch to the Apple CarPlay
screen while listening to
another source
Press the [] button.
1
DDX8905S/ DMX7705S
DDX6905S/ DDX6705S
Android Auto™ Operation
Android Auto enables you to use functions of
your Android device convenient for driving.
You can easily access route guidance, make
calls, listen to music, and access convenient
functions on the Android device while driving.
For details about Android Auto, visit https://
www.android.com/auto/ and https://support.
google.com/androidauto.
Compatible Android devices
You can use Android Auto with Android
devices of Android version 5.0 (Lollipop) or
later.
NOTE
• Android Auto may not be available on all devices
and is not available in all countries or regions.
Ñ Preparation
Connect an Android device via USB
1
terminal. (P. 95)
To use the hands-free function, connect the
Android device via Bluetooth.
When an Android device compatible
with Android Auto is connected to the
USB terminal, the device is connected via
Bluetooth automatically, and the Bluetooth
Hands-Free phone currently connected is
disconnected.
Unlock your Android device.
2
NOTE
• If sound is output using Apple CarPlay when the
Apple CarPlay screen is displayed, the source is
switched to Apple CarPlay.
23English
APPS—Android Auto™/Apple CarPlay
Ñ Operation buttons and
available Apps on the Android
Auto screen
You can perform the operations of the Apps of
the connected Android device.
The items displayed on the screen differ
among the connected Android devices.
To enter Android Auto mode, touch [Android Auto] icon in the source selection screen.
(P. 12)
1
1
Application/information buttons
Starts the application or displays information.
To exit the Android Auto screen
DDX8905S/ DMX7705S
1
Press the [HOME] button.
DDX6905S/ DDX6705S
Press the [
] button.
Ñ Switch to the Android Auto
screen while listening to
another source
Press the [] button.
1
DDX8905S/ DMX7705S
DDX6905S/ DDX6705S
NOTE
• If sound is output using Android Auto when the
Android Auto screen is displayed, the source is
switched to Android Auto.
Ñ Using voice control
Press the [] button for 1 second.
1
DDX8905S/ DMX7705S
Press for 1 second
DDX6905S/ DDX6705S
Press for 1 second
To cancel
Press the [] button.
1
24
APPS—Android Auto™/Apple CarPlay
WebLink™/Waze Operation
You can display and control the App on the
unit while your smartphone is connected to
the USB terminal.
Ñ Available Apps
You can use the following Apps on this
unit. Install the Apps on your smartphone
beforehand.
WebLink™
WebLink™ enables you to use the following
Apps with the unit.
• Media player
• Waze
• Yelp
• YouTube
• OpenWeatherMap
Waze
Waze is the world's largest community based
traffic and navigation App. Join other drivers in
your area who share real-time traffic and road
info, saving everyone time and gas money on
their daily commute.
• To use Waze on the unit, you need to install
WebLink™ and Waze on your smartphone
beforehand.
Connecting a smartphone
1
• Connect an Android device via USB
terminal. (P. 94)
• Connect iPhone using KCA-iP103 via USB
(Black) terminal. (P. 95)
• When the smartphone is connected
to the unit, a confirmation message to
communicate each other appears on the
smartphone. Touch [Allow] to establish
connection, or [Ignore] to cancel the
connection.
• You can check the connection status
on the WebLink™ screen on your
smartphone.
Ñ Operation buttons and
available Apps on the App
screen
To enter WebLink™ or Waze mode, touch
[WebLink] or [Waze] icon in the source
selection screen. (P.12)
WebLink source screen
1
1
[]
Displays the main menu of the “WebLink”
source screen.
Returns to the previous screen.
Operate on your smartphone.
2
• When you are asked to communicate
between your smartphone and the unit,
touch [Allow] to proceed.
Ñ Switching to the App screen
while listening to the another
source
Press the [] button.
1
NOTE
• If sound is output using WebLink when the App
screen is displayed, the source is switched to
WebLink.
25English
APPS—Android Auto™/Apple CarPlay
Pandora® Operation
You can listen to the Pandora® on this unit
by controlling the application installed in the
iPhone or Bluetooth device.
To enter Pandora source, touch [Pandora] icon
in the source selection screen. (P. 12)
Preparation
• Install the latest version of the Pandora®
application on your iPhone, Android or BlackBerry.
iPhone: Search for "Pandora" in the Apple App
Store to find and install the most current version.
Android: Visit the Google play and search for
Pandora to install.
BlackBerry: Visit www.pandora.com from the
built in browser to download the Pandora
application.
• iPhones are connected on either USB or
Bluetooth.
• Android or BlackBerry devices are connected on
Bluetooth.
• To connect a smartphone via Bluetooth, register
it as the Bluetooth device and do the App (SPP)
profile setting of the connection beforehand. See
Register the Bluetooth device (P.59) and
Connect the Bluetooth device (P.61).
1
2
1
Artwork/ Playing time
• The picture data is displayed if available from
current content.
• For confirmation of play time.
2
Operation keys
] : Searches for a station. For details on
• [
searching, see Station list screen (P.26).
• [
] (Thumbs down) : Thumbs down to the
current contents and skip to the next contents.
• [
] (Thumbs up) : Registers the current
contents as favorite content.
• [D] , [H] : Plays or pauses the content of the
current station.
• [F] : Skips the current song.
(Note this function is disabled when the
Pandora skip limitation is exceeded.)
• [
] (Bookmark Song) : Bookmarks a song in
the current contents.
• [
] : Creates a new station. See Creates a
new station (P.27).
• [
] : Displays the Graphic Equalizer screen.
(P. 80)
3
Content information
Displays the information of the current content
being played.
Ñ Station list screen
You can perform the following functions from
this screen.
Touch [ ].
1
Station List screen appears.
3
■ Selects the station
Touch the station name in the list.
■ Sort the list by registered date
Touch [By Recent]. The list is sorted to begin
with the last registered station.
■ Sort the list in alphabetical order
Touch [By Name]. You can select the desired
letter from the list which corresponds to the
station name to help narrow the search.
NOTE
• You can operate Pandora by using the remote
control. However, only playing, pausing, and
skipping are available.
26
APPS—Android Auto™/Apple CarPlay
Ñ Creates a new station
Touch [ ].
1
Touch desired item.
2
■ Create station from artist
Creates a new station based on an artist
being played.
■ Create station from track
Creates a new station based on a song being
played.
■ Create station from genre
Displays the genre list screen.
Genre list screen
Touch [Create station from genre].
1
About Pandora®
NOTE
• In the application on your device, log in and
create an account with Pandora.
(If you are not already a registered user, an
account can also be created at www.pandora.
com.)
• Establish an Internet connection.
• Pandora is only available in certain countries.
Please visit http://www.pandora.com/legal for
more information.
• Because Pandora® is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Pandora® cannot be operated
from this unit.
• For issues using the application, please contact
Pandora® at pandora-support@pandora.com.
The selected genre is created as a new
2
station.
27English
APPS—Android Auto™/Apple CarPlay
Spotify Operation
You can listen to the Spotify on this unit by
controlling the application installed in the
iPhone or Android.
To enter Spotify source, touch [Spotify] icon in
the source selection screen. (P. 12)
Preparation
• Install the latest version of the Spotify application
"Spotify" on your iPhone or Android.
iPhone: Search for "Spotify" in the Apple App
Store to find and install the most current version.
Android: Search for "Spotify" in Google play to
find and install the most current version.
• iPhones are connected on either USB or
Bluetooth.
• Android devices are connected on Bluetooth.
• To connect a smartphone via Bluetooth, register
it as the Bluetooth device and do the App (SPP)
profile setting of the connection beforehand. See
Register the Bluetooth device (P.59) and
Connect the Bluetooth device (P.61).
1
2
1
Artwork/ Playing time
• The picture data is displayed if available from
current content.
• For confirmation of play time.
2
Operation keys
] : Displays the Menu screen
• [
• [
] : New radio station that relates to the
artist of the currently playing song is selected
and playback starts.
• [
] , [] : Skips the current song.
• [
] , [] : Plays or pauses the content of the
current station.
] : Saves currently playing song to My
• [
Music.
• [
] : Displays the Graphic Equalizer screen.
(P. 80)
3
Content information
Displays the information of the current content
being played.
4
[ ] / [ ] / [ ] / [ ]
• [
] : Thumbs down to the current contents
and skip to the next contents.
• [
] : Registers the current contents as favorite
content.
• [
] : Repeats the current song.
• [
] : Randomly plays all song in current
playlist.
Ñ Selecting a track
Touch [ ].
1
Menu screen appears.
Select the list type, then select a desired
2
item.
4
3
■ Selects the category and station
Touch the category and station name in the
list.
To p]
■ [
Returns to the first hierarchy of the list.
Up]
■ [
Returns to the previous list.
28
About Spotify®
Note
• Ensure you are logged in to your smartphone
application. If you do not have an Spotify account,
you can create one for free from your smartphone
or at www.spotify.com.
• Because Spotify is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may
be impaired or some or all of the services may
become unavailable.
• Some functions of Spotify cannot be operated
from this unit.
• For issues using the application, contact Spotify at
www.spotify.com.
• Establish an Internet connection.
APPS—Android Auto™/Apple CarPlay
29English
USB
USB
Connecting a USB device
Connect the USB device with the USB
1
cable. (P. 94)
DDX8905S/ DMX7705S
2
Press the [HOME] button.
DDX6905S/ DDX6705S
Press the [
Touch .
3
Touch [USB]. (P.12)
4
] button.
Ñ Disconnect the USB device
DDX8905S/ DMX7705S
1
Press the [HOME] button.
DDX6905S/ DDX6705S
Press the [
Touch a source other than [USB].
2
Detach the USB device.
3
] button.
Ñ Usable USB device
You can use a mass-storage-class USB device on
this unit.
The word “USB device” appearing in this manual
indicates a flash memory device.
● About file system
The file system should be the one of the
following.
• FAT16• FAT32• exFAT• NTFS
NOTE
• Install the USB device in the place where it will
not affect safe driving.
• You cannot connect a USB device via a USB hub
and Multi Card Reader.
• Take backups of the audio files used with this
unit. The files can be erased depending on the
operating conditions of the USB device.
We shall have no compensation for any damage
arising from any erased data.
USB Basic Operation
Most functions can be controlled from the
source control screen and playback screen.
NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the operation mode (P.85).
Control screen
1
7
4
3
Open the drawer
4
2
5
6
5
30
Loading...
+ 80 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.