Kenwood DDX795, DDX595, DDX775BH, DDX5018BT, DDX6018BT Instruction Manual

...

INSTRUCTION MANUAL

MONITOR WITH DVD RECEIVER MONITOR WITH RECEIVER

ENGLISH

DDX795 (Region 1 – DVD Region Code 1 Area) DDX775BH (Region 1 – DVD Region Code 1 Area)

DMX6018BT

DMX718WBTL DDX6018BT (Region 4 – DVD Region Code 4 Area) DDX5018BT (Region 4 – DVD Region Code 4 Area) DDX595 (Region 1 – DVD Region Code 1 Area) DDX575BT (Region 1 – DVD Region Code 1 Area) DDX718WBTL (Region 4 – DVD Region Code 4 Area)

This instruction manual is used to describe the models listed above. Model availability and features (functions) may differ depending on the country and sales area.

Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DDX795/DDX775BH/DDX6018BT/DMX6018BT/DDX5018BT/DDX595/DDX575BT/DDX718WBTL/DMX718WBTL Serial number

US Residents Only

B5A-2145-10 (KN/RN)

Important NoticeImportant Notice

To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this manual. Please keep the manual in a safe and accessible place for future reference.

WARNINGS

To prevent accidents and damages

• DO NOT install any unit or wire any cable in a location where;

– it may obstruct the steering wheel and gearshift

lever operations.

– it may obstruct the operation of safety devices such

as air bags.

– it may obstruct visibility.

• DO NOT raise the volume level too much, as this will make driving dangerous by blocking outside sounds, and may cause hearing loss.

• DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look around carefully.

• Stop the car before performing any complicated operations.

• The driver must not watch the monitor while driving.

CAUTIONS

To care for the unit

• If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

To care for the monitor

• The monitor built into this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective.

• Do not expose the monitor to direct sunlight.

• Do not operate the touch panel using a ball-point pen or similar tool with a sharp tip.

Touch the keys on the touch panel with your finger

directly (if you are wearing a glove, take it off).

• When the temperature is very cold or very hot...

– Chemical changes occur inside, causing

malfunction.

– Pictures may not appear clearly or may move

slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments.

On the volume setting

• Digital devices produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level.

For DDX6018BT/DDX5018BT/DDX718WBTL:

The marking of products using lasers

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

For DDX795/DDX775BH/DDX595/DDX575BT:

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, the following are reproductions of labels on, or inside the product relating to laser product safety.

Location : Top plate

ENGLISHi

Important NoticeImportant Notice

For DDX795/DDX775BH/DDX595/DDX575BT:

CAUTION

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.

• Contains Transmitter Module FCC ID: 2ALS3-3901

• Contains Transmitter Module IC: 22661-3901

For DDX795/DDX775BH/DDX595/DDX575BT:

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

FCC NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

For DDX795/DDX775BH/DDX595/DDX575BT:

IC (Industry Canada) Notice

This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

ENGLISH ii

About this manual

ContentsContents

The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels.

Illustrations of DDX795 are mainly used for explanation.

This manual mainly explains operations using the buttons on the monitor panel and keys on the touch panel. For operations using the remote controller, see page 56.

< > indicates the various screens/menus/ operations/settings that appear on the touch panel.

[ ] indicates the keys on the touch panel.

Indication language: English indications are used for the purpose of explanation. You can select the indication language from the <SETUP> menu. (Page 53)

Component Names and Operations ...............3

Basic Operations .................................................5

Turning on the power ..................................................................5

Turning off the power/turning off the AV source .......5

Putting the unit in standby .......................................................5

Turning off the screen ..................................................................5

Adjusting the volume ...................................................................6

Attenuating the sound ................................................................6

Monitor panel operations ..........................................................6

Getting Started ...................................................7

Initial settings .....................................................................................7

Setting the security function....................................................7

Calendar/clock settings ...............................................................8

Various Screens and Operations .....................8

Touch screen operations ............................................................8

Home screen ......................................................................................9

Source control screen ................................................................10

List/setting screen........................................................................12

Disc ......................................................................13

Video ...................................................................14

USB ......................................................................16

iPod/iPhone .......................................................17

Apps—WebLink™/Waze ..................................18

HD Radio™ tuner ...............................................19

Radio ...................................................................22

SiriusXM® Satellite Radio ................................24

Pandora® ............................................................33

Spotify ................................................................35

Other External Components ..........................36

View camera ....................................................................................36

AV-IN .....................................................................................................37

Watching TV ....................................................................................38

Using the external navigation unit .................................... 38

Using an external component via ADS adapter—

OEM Features .................................................................................. 39

Bluetooth® .........................................................40

Information ...................................................................................... 40

Preparation ....................................................................................... 40

Connection.......................................................................................40

Bluetooth mobile phone ......................................................... 42

Bluetooth audio player .............................................................45

Bluetooth mobile phone settings ......................................46

Settings ..............................................................46

Audio settings ................................................................................46

AV settings ........................................................................................ 50

Display settings ..............................................................................51

User interface settings ............................................................... 52

Camera settings ............................................................................53

Special system settings .............................................................54

Bluetooth settings .......................................................................55

Security settings ............................................................................ 55

Navigation settings ..................................................................... 55

Remote Controller ............................................56

Preparation ....................................................................................... 56

Basic operations for RC-DV340 (supplied) .................... 56

Basic operations for KNA-RCDV331 (optionally

purchased) ........................................................................................58

KENWOOD Remote APP ......................................................60

Installation and Connection ...........................60

References .........................................................66

Maintenance ................................................................................... 66

More information ......................................................................... 66

Troubleshooting ...............................................70

Specifications ....................................................73

Trademarks and licenses .......................................................... 77

ENGLISH

Component Names and OperationsComponent Names and Operations

DDX795/DDX775BH/DDX6018BT

DMX6018BT

1 Remote sensor*1 2 Screen (touch panel) 3 Monitor panel 4 VOLUME K/J button 5 CAM/DISP OFF button

• CAM (Press): Displays the picture from the

connected rear view camera.

• DISP OFF (Hold): Turns off the screen.

HOME button

• (Press): Turns on the power.

• (Hold): Turns off the power or AV source.*2

• HOME (Press): Displays the Home screen while

the power is on.

7 MENU/ATT button

• MENU (Press): Pops up the short-cut menu.

• ATT (Hold): Attenuates the sound.

8 /VOICE button

• (Press): Displays the App screen. (Page 19)

• VOICE (Hold): Activates the voice dialing.

9 DDX795/DDX775BH/DDX6018BT: M button

Displays the <Angle Adjust> screen. (Page 6)

DMX6018BT: AV button Switches the screen between the navigation and the current source.

DDX5018BT

1 Remote sensor*1 2 Power indicator/Security indicator

• Lights up while the unit is turned on.

• Flashes when the security function is activated.

3 M button 4 Loading slot 5 Screen (touch panel) 6 Monitor panel 7 HOME button

• (Press): Turns on the power.

• (Hold): Turns off the power or AV source.*2

• HOME (Press): Displays the Home screen while

the power is on.

8 MENU/CAMERA button

• MENU (Press): Pops up the short-cut menu.

• CAMERA (Hold): Displays the picture from the

connected rear view camera.

9 /VOICE button

• (Press): Displays the App screen. (Page 19)

• VOICE (Hold): Activates voice dialing.

p Volume J/K buttons

*1 DO NOT expose the remote sensor to bright light (direct sunlight

or artificial lighting).

*2 The function of the button when held varies depending on

the <Manual Power OFF> setting on the <Special> screen. (Page54)

3ENGLISH

Component Names and OperationsComponent Names and Operations

DDX595/DDX575BT

1 Remote sensor*1 2 Power indicator/Security indicator

• Lights up while the unit is turned on.

• Flashes when the security function is activated.

3 M button 4 Loading slot 5 Screen (touch panel) 6 Monitor panel 7 HOME button

• (Press): Turns on the power.

• (Hold): Turns off the power or AV source.*2

• HOME (Press): Displays the Home screen while

the power is on.

8 CAM/DISP OFF button

• CAM (Press): Displays the picture from the

connected rear view camera.

• DISP OFF (Hold): Turns off the screen. /VOICE button

• (Press): Displays the App screen. (Page 19)

• VOICE (Hold): Activates voice dialing.

p Volume/MENU/ATT knob

• Volume (Turn): Adjusts the audio volume.

• MENU (Press): Pops up the short-cut menu.

• ATT (Hold): Attenuates the sound.

DDX718WBTL

DMX718WBTL

1 /VOICE button

• (Press): Displays the App screen. (Page 19)

• VOICE (Hold): Activates voice dialing.

2 Volume J/K buttons

3 HOME button

• (Press): Turns on the power.

• (Hold): Turns off the power or AV source.*2

• HOME (Press): Displays the Home screen while

the power is on.

4 MENU/ATT button

• MENU (Press): Pops up the short-cut menu.

• ATT (Hold): Attenuates the sound.

5 CAM/DISP OFF button

• CAM (Press): Displays the picture from the

connected rear view camera.

• DISP OFF (Hold): Turns off the screen.

6 DDX718WBTL: M button

Displays the <Angle Adjust> screen. (Page 6)

DMX718WBTL: AV button Switches the screen between the navigation and the current source.

7 Remote sensor*1 8 Monitor panel 9 Screen (touch panel)

*1 DO NOT expose the remote sensor to bright light (direct sunlight

or artificial lighting).

*2 The function of the button when held varies depending on

the <Manual Power OFF> setting on the <Special> screen. (Page54)

ENGLISH

Basic OperationsBasic Operations

Turning on the power

DDX795 DDX775BH DDX6018BT DMX6018BT

DDX5018BT DDX595 DDX575BT

DDX718WBTL DMX718WBTL

Turning off the power/turning off the AV source

• This function varies depending on the <Manual Power OFF> setting. (Page 54)

DDX795 DDX775BH DDX6018BT DMX6018BT

DDX5018BT DDX595 DDX575BT

(Hold) (Hold) (Hold)

DDX718WBTL DMX718WBTL

Putting the unit in standby

1 Display the source/option selection

screen.

On the Home screen, touch as follows:

2 Put the unit in standby.

On the source/option selection screen, touch as follows:

Turning off the screen

On the pop-up short-cut menu

1 Display the pop-up short-cut menu.

DDX795 DDX775BH DDX6018BT DMX6018BT

DDX595 DDX575BT

DDX5018BT

DDX718WBTL DMX718WBTL

2 On the pop-up short-cut menu, touch as

follows:

Display OFF

To turn on the screen: Touch the screen.

On the monitor panel

(Only for DDX795/DDX775BH/DDX6018BT/ DMX6018BT/DDX595/DDX575BT/DDX718WBTL/ DMX718WBTL)

DDX795 DDX775BH DDX6018BT DMX6018BT

To turn on the screen: Press DISP OFF on the monitor panel or touch the screen.

DDX595 DDX575BT

(Hold) (Hold) (Hold)

DDX718WBTL DMX718WBTL

ENGLISH

Basic OperationsBasic Operations

Adjusting the volume

DDX795 DDX775BH DDX6018BT DMX6018BT

You can adjust the volume (00 to 40) by pressing J to increase and pressing K to decrease.

• Holding J increases the volume continuously to level 15.

DDX595/DDX575BT

You can adjust the volume (00 to 40) by turning the knob to the right to increase and to the left to decrease.

DDX5018BT DDX718WBTL

DMX718WBTL

Attenuating the sound

(Only for DDX795/DDX775BH/DDX595/DDX575BT/ DDX6018BT/DMX6018BT/DDX718WBTL/ DMX718WBTL)

DDX795 DDX775BH DDX6018BT DMX6018BT

The ATT indicator lights up.

To cancel attenuation: Press and hold the same button again.

DDX595 DDX575BT

DDX718WBTL DMX718WBTL

(Hold)(Hold)(Hold)

Monitor panel operations

(Only for DDX795/DDX775BH/DDX6018BT/ DMX6018BT/DDX718WBTL/DMX718WBTL)

1 Display the <Angle Adjust> screen.

DDX775BH DDX6018BT

DMX6018BT/DMX718WBTL

Press MENU on the monitor panel to display the pop-up short-cut menu, then touch [Angle].

DDX718WBTLDDX795

2 Perform the adjustment or operation.

E.g. Angle adjust screen for DDX795

[0] – [6] Selects a monitor angle.

(The monitor panel will stay in this angle when you turn on the unit.)

<Off Position> Sets the angle of the monitor

panel you want when you turn off the unit or the ignition switch of the vehicle.

• Select the monitor angle,

then touch [Memory].

M DISC EJECT]

[

• To return to the previous screen, touch [

setting screen.

(Only for DDX795/DDX775BH/ DDX6018BT/DDX718WBTL) (Touch) Ejects the disc.

To return the monitor panel to the selected angle:

M on the monitor panel.

Press

] on the

ENGLISH

Getting StartedGetting Started

Initial settings

When you power on the unit for the first time, the

<Initial SETUP> screen appears.

Perform the initial settings.

E.g. Initial settings screen for DDX795

Once completed, a warning message appears. Touch

[Agree] to display the Home screen.

[Language]*1

Select the text language used for on-screen information. Touch [Language Select], then select the language.

• American English(en) (Initial)/British English(en)/

Nederlands(nl)/Français(fr)/Deutsch(de)/ Italiano(it)/Español(es)/(ar) /Ελληνικά(el)/ Português(pt)/Čeština(cs)/Polski(pl)/ Magyar(hu)/Руccĸий(ru)/ (th)/ Türkçe(tr)/ (zh)/(he) /(fa) / BahasaMelayu(ms)/Bahasa Indonesia(id)

[Clock] (Page 8)

Set the calendar and clock time. Make the settings for [Clock], [Time Zone] or [Clock

Adjust]. [Display] (Page 51)

Make the settings to adjust the display.

[Camera] (Page 53) Make the settings to display the picture from the connected view camera.

[OEM SETUP]*2 (Page 50) Confirm the information about/change the settings for using the ADS adapter.

[DEMO]

• ON (Initial): Activates the display demonstration.

• OFF: Deactivates the display demonstration.

*1 Only for DDX795/DDX775BH/DDX6018BT/DDX5018BT/DDX595/

DDX575BT/DDX718WBTL: “Please Power Off” appears when the setting is changed. To enable the change:

– When <Manual Power OFF> is set to [AV OFF], turn off the

ignition switch, then turn on the ignition switch.

– When <Manual Power Off> is set to [Complete OFF], turn off

the power of the unit, then turn on the power of the unit.

*2 Only for DDX795/DDX775BH/DDX595/DDX575BT.

Setting the security function

Registering a security code

(Only for DDX6018BT/DMX6018BT/DDX5018BT/

DDX718WBTL/DMX718WBTL)

You can set a security code (four-digit number of your choice) to protect your receiver system against theft. Once you set the security code, you are required to input the security code when the power is on to reconnect the battery.

1 Display the Home screen.

DDX6018BT DMX6018BT

DDX5018BT DDX718WBTL

DMX718WBTL

2 Display the <Security Code Set> screen.

On the Home screen, touch as follows:

Then, on the <SETUP> screen, touch as follows: [Security] → [Security Code Set]

3 Enter a four-digit number (1), then

confirm the entry (

• To clear the last entry, touch [BS].

• To cancel the setting, touch [ ].

2).

4 Enter the four-digit number entered in

step 3 and touch [Enter] again to confirm your security code.

To change the security code: Touch [Security Code Change] on the <Security> screen on step 2, then

repeat steps 3 and 4.

To clear the security code: Touch [Security Code Cancellation] on the <Security> screen on step 2,

then repeat step 3.

ENGLISH

Getting StartedGetting Started

Various Screens and Various Screens and

Activating the security function

(Only for DDX5018BT/DDX595/DDX575BT)

You can activate the security function to protect your receiver system against theft.

1 Display the <Security> screen.

On the Home screen, touch as follows:

Then, on the <SETUP> screen, touch [Security].

2 Activate the security function.

On the <Security> screen, touch [SI] to select [ON].

The security indicator on the monitor panel flashes when the vehicle ignition is off.

To deactivate the security function: Touch [SI] to select [OFF] in step 2.

Calendar/clock settings

1 Display the Home screen.

DDX795 DDX775BH DDX6018BT DMX6018BT

DDX5018BT DDX595 DDX575BT

DDX718WBTL DMX718WBTL

2 Display the <User Interface> screen.

On the Home screen, touch as follows:

Then, on the <SETUP> screen, touch [User Interface].

3 Set the date and clock.

[Clock]

Select the method to set the date and clock.

• RDS-SYNC (Initial): Synchronizes the clock with

the FM RBDS.

• Manual: Sets the date and clock manually. [Time Zone]*

Select the time zone for your area. [Clock Adjust]*

Set the date and clock manually when [Clock] is set to [Manual].

J]/[K] to adjust the date (year/month/

Touch [ date), then clock (hour/minute). To finish setting, touch [Set].

* Available when [Clock] is set to [Manual].

OperationsOperations

You can display or change to other screens at any time to show information, change the AV source, change the settings, etc.

Touch screen operations

To perform operations on the screen, you need to touch, touch and hold, flick or swipe to select an item, display setting menu screen or to change the page, etc.

Touch

Touch the screen gently to select an item on the screen.

Touch and hold

Touch the screen and keep your finger in place until the display changes or a message is displayed.

Flick

Slide your finger to the left or right on the screen to change the page.

Swipe

Slide your finger up or down on the screen to scroll the screen.

8 ENGLISH

Various Screens and OperationsVarious Screens and Operations

Home screen

When you turn on the power for the first time, the Home screen appears.

• You can customize the Home screen.

• To display the Home screen from other screens, press HOME on the monitor panel.

E.g. Home screen for DDX795

Touching the operation keys performs the following actions:

1 Displays the current playing source control screen 2 For DDX795/DDX775BH/DDX595/DDX575BT:

Widget

• You can change the widget by touching [ ]/[ ]

or flicking left or right on the widget area.

• Touch the widget to display the detailed screen. For DDX6018BT/DMX6018BT/DDX5018BT/ DDX718WBTL/DMX718WBTL: Clock/date

3 Page indication for widgets* 4 Current source information 5 Displays all playback sources and options 6 Short-cut playback source keys 7 Displays the phone control screen

* Only for DDX795/DDX775BH/DDX595/DDX575BT.

Available playback sources and options

• For sources and information displayed when an ADS adapter is connected, see page 39.*1

Touch 5 to display the source/option selection screen.

E.g. Source/option selection screen for DDX795

Touching the operation keys performs the following actions:

[WebLink] Switches to the WebLink™

application.

[Waze] Switches to the Waze application. [HD Radio]*2 Switches to the HD Radio or the

conventional radio broadcast.

[Radio]*3 Switches to the conventional radio

broadcast.

[SiriusXM]*1 Switches to the SiriusXM® radio

broadcast.

[Bluetooth] Plays a Bluetooth audio player. [Spotify] Switches to the Spotify application. [Pandora]*1 Switches to the Pandora broadcast.

[DISC]*4 Plays a disc. [iPod] Plays an iPod/iPhone. [USB] Plays files on a USB device. [AV-IN]*5 Switches to an external component

connected to the AV-IN input terminal.

[Audio] Displays the sound adjustment

screen.

[STANDBY] Puts the unit in standby. [NAV]*5 Displays the navigation screen

when a navigation unit is connected.

]

[

To change the page: Touch [

shown by the page indication on the bottom of the screen.

To return to the Home screen: Touch [ ] on the source/option selection screen.

*1 Only for DDX795/DDX775BH/DDX595/DDX575BT. *2 Only for DDX795/DDX775BH. *3 Only for DDX6018BT/DMX6018BT/DDX5018BT/DDX595/

DDX575BT/DDX718WBTL/DMX718WBTL.

*4 Only for DDX795/DDX775BH/DDX6018BT/DDX5018BT/DDX595/

DDX575BT/DDX718WBTL.

*5 Only for DDX6018BT/DMX6018BT/DDX5018BT/DDX718WBTL/

DMX718WBTL.

Displays the <SETUP> screen.

]/[ ]. Current page is

9ENGLISH

Various Screens and OperationsVarious Screens and Operations

Customizing the source/option selection

screen

You can arrange the items to display on the source/ option selection screen.

1 Select an item to move.

Touch and hold the item you want to move until boxes appear around the icons.

2 Drag the selected item to the position you

want to move it to.

E.g. Source/option selection screen for DDX795

About short-cut playback source keys on the Home screen

The three items displayed on the top of the source/ option selection screen with large icons are also shown on the Home screen as the short-cut playback source keys. You can set the source keys which you use frequently and access quickly from the Home screen.

Source control screen

You can perform the playback operation from the source control screen during playback.

• The operation keys and information displayed vary depending on the selected source/disc type/file type being played.

• If the operation keys are not displayed on the screen, touch the screen to show them.

E.g. Common audio playback source screen for

DDX795

1 Playback source or media type 2 Picture data/artwork (shown if the file contains

artwork except for disc playback)

3 For video: Hides the operation buttons on the

screen while video is played

• Touch the screen to restore the operation buttons.

For audio: File format

4 Repeat/random playback mode keys*1 5 Information about connected device

• For Bluetooth device: Signal strength and battery level (only when the information is acquired from the device)

6 Track/file/song/video information

• Touching [

is shown.

7 Clock display 8 Displays the track/file/station/channel list 9 Displays/hides other available operation keys*1 p Displays the source/option selection screen q Operation keys*1 w Secondary screen

Each time you touch [ ]/[ ] , the items shown on

the secondary screen change as follows:

• Indicators: Displays the current source conditions, etc. The followings are the common indicators:

• Short-cut buttons: Changes the source from those you have located on the Home screen.

• Current source information while the navigation screen is displayed: Touching the information area displays the source control screen. *2

e Displays the phone control screen

*1 See “Common operation keys on source control screen” on

page 11.

*2 Only for DDX6018BT/DMX6018BT/DDX5018BT/DDX718WBTL/

DMX718WBTL.

] scrolls the text if not all of the text

−ATT: The sound is attenuated.

−LOUD: The loudness is active.

−IN: A disc is inserted.

−MUSIC/VIDEO: Music/video file is played back.

10 ENGLISH

Various Screens and OperationsVarious Screens and Operations

Common operation keys on source control screen

• The appearance of the operation keys may differ, however the similar operation keys have the same operations.

• Available operation keys differ depending on the selected source or connected device.

Touching the operation keys performs the following actions:

[ ]*

[

Selects repeat playback mode.

•

: Repeat one

• : Repeat folder

• ALL: Repeat all

• CAP: Repeat chapter

• TIT: Repeat title

• (gray): Off

Selects random playback mode.

•

: Random folder

• ALL: Random all

• (gray): Off

[ ]

] [ ]

[

] [ ]

[

[SETUP] Displays the setting screen of the

[MENU CTRL] Displays the video menu control

][ ]

[

[Audio] Changes the audio output channel

[ ]

]

[

S]/[T]

[

IW]

[

Displays other available operation keys besides those shown on q.

• To hide the window, touch [

Reverses/forwards search during playback.

Plays in slow-motion.

Stops playback.

current playback source.

screen. (Page 15)

Selects a folder.

of VCD.

Displays the <Graphic Equalizer> screen.

Displays the folder list/track list/audio menu/video menu.

• (Touch) Selects an item (chapter/ folder/track/audio file/video file).

• (Hold) Reverses/forwards search.

• (Hold) Plays in slow-motion while paused for video playback.

Starts/pauses playback.

* About playback mode:

– Available playback mode differs depending on the source, disc/

file type, connected device, etc.

– You cannot activate repeat playback mode and random

playback mode at the same time.

Using the pop-up short-cut menu

While displaying the source control screen, you can jump to another screen by touching the operation keys on the pop-up short-cut menu.

1 Display the pop-up short-cut menu.

DDX795 DDX775BH DDX6018BT DMX6018BT

DDX595 DDX575BT

DDX5018BT

DDX718WBTL DMX718WBTL

11ENGLISH

Various Screens and OperationsVarious Screens and Operations

2 Select an item to jump.

E.g. Pop-up short-cut menu screen for DDX795

1 Displays the picture adjustment screen.

(Page 15)

2 Turns off the screen. 3 Camera (for DDX795/DDX775BH/DDX6018BT/

DMX6018BT/DDX5018BT/DDX595/DDX575BT): Displays the picture from the connected rear view camera. (Page 36)

Angle (for DDX718WBTL/DMX718WBTL):

Displays the <Angle Adjust> screen. (Page 6)

4 Displays the <SETUP> screen. (Page 50) 5 Displays the sound adjustment screen. 6 Displays the current source control screen. 7 Closes the pop-up short-cut menu. 8 Changes the playback source.

• The three short-cut playback source keys displayed on the Home screen are displayed on the short-cut menu.

9 Displays the phone control screen. (Page 43)

Using touch screen operation during

playback

Touching the areas performs the following actions: 1 Displays the video control menu while playing a

video.

2 Displays the source control screen. 3 Goes to the previous chapter/track.* 4 Goes to the next chapter/track.*

* Not available for video from an external component (AV-IN) (for

DDX6018BT/DMX6018BT/DDX5018BT/DDX718WBTL/ DMX718WBTL).

List/setting screen

The followings are the common operation keys which appear on the list/settings screen.

• The appearance of the operation keys may differ, however the similar operation keys have the same operations.

• Available operation keys differ depending on the setting screens. Not all the following operation keys are shown on every screen.

Touching the operation keys performs the following actions:

1 Displays list type selection window. 2 Selects the file type ([ ]: audio/[ ] : video). 3 Exits from the current screen or returns to the

previous screen.

4 Scrolls the text if not all of the text is shown. 5 Play/search keys

• [I Play]: Plays all tracks in the folder containing

the current track.

• [ A-Z]: Enters alphabet search to list the items

in alphabetical order. When a keypad appears, touch the first letter you want to search for.

• [ Top]: Returns to the root folder.

• [ Up]: Returns to the upper layer.

6 Changes the page to display more items.

• [J]/[K]: Scrolls the page.

• [ ]/[ ]: Jumps to the top or bottom page.

ENGLISH

Disc Disc (Only for DDX795/DDX775BH/DDX6018BT/DDX5018BT/DDX595/DDX575BT/DDX718WBTL)

• If a disc does not have a disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc.

• For playable disc types, file types and other information, see pages 66 and 67 .

• If “ ” appears on the screen, the unit cannot accept the operation you have tried to do.

– In some cases, without showing “ ”, operations

will not be accepted.

• When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.

Inserting a disc

DDX795/DDX775BH/DDX6018BT/DDX718WBTL: Press M on the monitor panel to display the <Angle Adjust> screen, touch [M DISC EJECT] to open the monitor panel, then insert a disc.

Label side up

E.g. Inserting a disc for DDX795

• After the disc is loaded, the monitor panel closes automatically.

DDX5018BT/DDX595/DDX575BT:

Label side up

E.g. Inserting a disc for DDX595

The source changes to “DISC” and playback starts.

• The IN indicator lights up while a disc is inserted.

Ejecting a disc

DDX795/DDX775BH/DDX6018BT/DDX718WBTL

Press M on the monitor panel.

On the <Angle Adjust> screen, then touch as follows:

DDX5018BT/DDX595/DDX575BT:

• When removing a disc, pull it out horizontally.

• You can eject a disc while playing another AV source.

• If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

To close the monitor panel (only for DDX795/ DDX775BH/DDX6018BT/DDX718WBTL):

After removing the disc, press

M on the monitor panel.

Playback operations

Audio playback information and key

operation

• For playback information, see “Source control screen” on page 10.

• For key operations on the touch panel, see “Common operation keys on source control screen” on page 11.

Selecting a folder/track on the list

1 Display the folder/track list.

On the source control screen, touch as follows:

2 Select the item in the selected folder.

• For details about the list operation, see page 12.

Select an item in each layer until you reach and select the desired file.

ENGLISH

DiscDisc

VideoVideo

Settings for disc playback

• Available items shown on the <DVD SETUP> screen

differ depending on the type of disc/file being played back.

1 Display the <DVD SETUP> screen.

On the source control screen, touch as follows:

2 Make the settings.

[Menu Language]* Select the initial disc menu language. (Initial:

English) [Subtitle Language]*

Select the initial subtitle language or turn subtitles off (OFF). (Initial: English) [Audio Language]* Select the initial audio language. (Initial: English)

You can change the dynamic range while playing Dolby Audio encoded discs.

• Wide: Reproduces powerful sound at a low

volume level with its full dynamic range.

• Normal: Reduces the dynamic range a little.

• Dialog (Initial): Reproduces movie dialog more

clearly.

Select the monitor type to watch a wide screen picture on the external monitor.

16:9 (Initial) 4:3 LB 4:3 PS

* You can change these settings only while DVD is inserted. Select

the language on the window, then touch [Close] to finish.

Playback operations

Video playback information on the source

control screen

E.g. Video playback source control screen for

DDX795

1 Media type 2 Hides the operation buttons on the screen.

• Touch the screen to restore the operation buttons.

3 Repeat/random playback mode keys 4 Current playback item information/audio format 5 Playback status/playing time 6 Indicators

• IN: Lights up when a disc is inserted.

• VIDEO: Lights up when video is played.

14 ENGLISH

VideoVideo

Video menu control operations

(Only for DDX795/DDX775BH/DDX6018BT/

DDX5018BT/DDX595/DDX575BT/DDX718WBTL)

You can display the video menu control during video playback.

• Available operation keys differ depending on the selected disc type and file type.

1 Display the video menu control screen.

On the source control screen, touch as follows:

2 Perform the video operations.

E.g. Video menu control screen for DDX795

Touching the operation keys performs the following actions:

[Top] Displays the top menu (DVD). [Menu] Displays the disc menu (DVD). [Return] Returns to the previous screen. [Enter] Confirms the selection. [Highlight] Switches to the direct disc menu

selection mode. Touch the target item to select.

• The menu screen disappears when no operation is done for 5 seconds.

]

[ [Angle] Selects the view angle. [Subtitle] Selects the subtitle type. [Audio] Selects the audio type.

J] [K] [H] [I]

[

Returns to the playback screen.

Selects an item.

Adjusting the picture

1 Display the pop-up short-cut menu.

DDX795 DDX775BH DDX6018BT DMX6018BT

DDX595 DDX575BT

DDX5018BT

DDX718WBTL DMX718WBTL

2 Display the picture adjustment screen.

On the pop-up short-cut menu, touch as follows:

3 Adjust the picture.

15ENGLISH

VideoVideo

USBUSB

<Backlight> Adjusts the brightness of the

backlight. (−4 to +4)

<Contrast> Adjusts the contrast. (−4 to +4) <Brightness> Adjusts the brightness. (−4 to +4) <Color>*1 Adjusts the color. (−4 to +4) <Tint>*2 Adjusts the tint. (−4 to +4) <Aspect> Selects the aspect ratio.

• Full: Changes the aspect ratio of

video and displays fully on the screen.

• Normal: Displays the video in

the aspect ratio of 4:3.

• Auto*3:

– For discs: Video of 16:9 ratio is

displayed in the aspect ratio of <Full> setting. Video of 4:3 ratio is displayed in the aspect ratio of <Normal> setting.

– For USB: Displays the video

fully on vertical or horizontal with no ratio change.

• Adjustable items are different depending on the current source.

• You can perform this function only when you have applied the parking brake.

*1 Adjustable only during playback. *2 Available only when the “AV-IN” or camera screen is displayed. *3 Selectable only when video from a disc or USB device is played

back.

You can connect a USB mass storage class device such as a USB memory, digital audio player, etc. to the unit.

• For playable file types and other information, see pages 66 and 69.

• You cannot connect a PC or portable HDD to the USB input terminal.

• You cannot connect a USB device via a USB hub.

Connecting a USB device

• Use CA-U1EX for extending the cable if necessary. (Max 500 mA, 5V)

USB device (commercially available)

Rear panel

• Only for DMX718WBTL: The unit is equipped with two USB input terminals. You can connect two USB devices.

Playback operations

Playback information and key operation

• For playback information, see “Source control screen” on page 10.

• For key operations on the touch panel, see “Common operation keys on source control screen” on page 11.

• All tracks in the USB device will be played repeatedly until you change the source or disconnect the USB device.

Additional keys operations: Touching the operation keys performs the following actions.

[USB DEVICE CHANGE]*

* Only for DMX718WBTL.

Switches to another USB device when two USB devices are connected.

16 ENGLISH

USBUSB iPod/iPhoneiPod/iPhone

Selecting a folder/track on the list

1 Display the folder/track list.

On the source control screen, touch as follows:

2 Select the list type.

3 Select the desired track.

• Repeat the procedure until you select the desired track.

• For details about the list operation, see page 12.

From <Category List>:

1 Select the file type ([ ]: audio/[ ] : video). 2 Select a category, then the item in the selected

category.

From <Link Search>:

1 Select the file type ([ ]: audio/[ ] : video). 2 Select the tag type to display a list of contents

that contains the same tag as the track/file currently being played, then select the item.

From <Folder List>:

Select the folder, then the item in the selected folder.

Connecting an iPod/iPhone

• For playable iPod/iPhone types and other information, see page 69.

• You cannot watch video.

Wired connection

iPod/iPhone (commercially available)

USB Audio cable for iPod/iPhone: KCA-iP103 (optional accessory)

Rear panel

• For DMX718WBTL: You cannot connect two iPod/ iPhone at the same time.

Bluetooth connection

Pair the iPod/iPhone with this unit via Bluetooth. (Page 40)

ENGLISH

iPod/iPhoneiPod/iPhone

Apps—WebLink™/WazeApps—WebLink™/Waze

Playback operations

Playback information and key operation

• For playback information, see “Source control screen” on page 10.

• For key operations on the touch panel, see “Common operation keys on source control screen” on page 11.

Selecting an audio file from the menu

1 Display the list.

On the source control screen, touch as follows:

2 Select the list type.

3 Select the desired track.

• Repeat the procedure until you select the desired track.

• For details about the list operation, see page 12.

From <Category List>:

Select a category, then the item in the selected category.

• Available categories differ depending on the type of iPod/iPhone.

From <Link Search>:

Select the tag type to display a list of contents that contain the same tag as the track/file currently being played, then select the item.

You can display and control the App on the unit while your smartphone is connected to the USB input terminal. Preparation: Be sure to ground the PRK SW lead. (Pages 63 – 65)

Available Apps

You can use the following Apps on this unit. Install the WebLink™ App and/or Waze App on your smartphone beforehand.

WebLink™

WebLink™ enables you to use the following Apps with the unit.

• Media Player

• Yelp

• YouTube

• OpenWeatherMap

Waze

Waze is the world's largest community based traffic and navigation App. Join other drivers in your area who share real-time traffic and road info, saving everyone time and gas money on their daily commute.

• To use Waze on the unit, you need to install Waze on your smartphone and connect WebLink™ before starting Waze.

ENGLISH

Apps—WebLink™/WazeApps—WebLink™/Waze

Connecting a smartphone

Android™ device (commercially available)

USB cable (commercially available)

USB Audio cable for iPod/iPhone:

KCA-iP103 (optional accessory)

Rear panel

• When the smartphone is connected to the unit and

“WebLink” is selected as the source, a confirmation message to communicate with each other appears on the smartphone. Touch [Allow] to establish connection, or [Ignore] to cancel the connection.

• You can check the connection status on the WebLink™ screen on your smartphone.

iPhone (commercially

available)

Rear panel

Start playback

1 Select “WebLink”/“Waze” as the source.

• To use WebLink™: Select “WebLink”.

• To use Waze: Select “Waze”.

2 Operate on the unit to select App.

• On the “WebLink” source screen, you can also

operate on the touch panel as follows:

[ ]

[

]

• Displays the main menu of the

“WebLink” source screen.

• Exits the current App.

• Returns to the previous screen.

• Exits the current App.

3 Operate on your smartphone.

• When you are asked to communicate between

your smartphone and the unit, touch [Allow] to proceed.

• If App does not start while using “WebLink”, start

the App on your smartphone.

Switching to the App screen while listening

to the another source

You can display the App screen while listening to the other source.

DDX795 DDX775BH DDX6018BT DMX6018BT

DDX5018BT DDX595 DDX575BT

DDX718WBTL DMX718WBTL

HD Radio™ tuner HD Radio™ tuner

(Only for DDX795/DDX775BH)

About HD Radio™ Technology

Adjacent to traditional main stations are HD2/HD3 Channels, providing new original formats on the FM dial

HD Radio broadcasts deliver crystal-clear, CD-like digital audio quality to consumers

Provides song name, artist, station ID, and other relevant data to enrich the listening experience

Delivers critical and life-saving messages to the public during emergency situations

ENGLISH

HD Radio™ tunerHD Radio™ tuner

Listening to the HD Radio™ broadcast

Playback information on the source control

screen

FM 01

FM 02

FM 03

FM 04

E.g. HD Radio source control screen for DDX795

1 Displays/hides other available operation keys* 2 Picture or station logo if available 3 Changes the seek mode for [S]/[T]

• AUTO1 (Initial): Auto search

• AUTO2: Tunes in preset stations one after

another

• MANUAL: Manual search

4 HD indicator

• When receiving a digital HD radio broadcast, the HD indicator lights up in orange.

• When receiving an analog HD radio broadcast, the HD indicator lights up in gray.

• When receiving a conventional radio broadcast, the HD indicator is turned off.

5 Text information

• Touching [<] scrolls the text if not all of the text

is shown.

• Touching [

frequency, channel no., station name, artist, etc.).

−The availability of the information vary depending on the reception, selected station or channel.

6 Preset list 7 Selects the band (AM/FM) 8 Operation keys* 9 Indicators

• MC: Lights up when receiving an HD Radio

multicast channel.

• DIGITAL: Lights up when receiving digital signals.

• ANALOG: Lights up when receiving analog

signals.

• EA: Indicates the status of the emergency alert

as follows:

−Lights in white: The current station supports the emergency alert.

−Lights in orange: Receives the emergency alert or snoozes/ignores the reception.

−Turns off : Emergency alert is deactivated.

• ST: Lights up when receiving stereo broadcast.

* See the following “Operation keys on source control screen”.

] switches the information (e.g.

Operation keys on source control screen

• The appearance of the operation keys may differ, however the similar operation keys have the same operations.

• See also “Common operation keys on source control screen” on page 11.

Touching the operation keys performs the following actions:

[10Key Direct]

[PTY] (For FM RBDS features)

[AME] Presets stations automatically.

[RCV] Changes the HD Radio reception mode.

[Emergency Alerts]

[Alert Message Log]

Displays the direct station/channel search screen.

Enters PTY search mode.

1 Touch a PTY code to search for. 2 Touch [Search].

If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in.

• AUTO: Switch between digital and

analog audio automatically.

• Digital: Select this to tune into digital

audio only.

• Analog: Select this to tune into

analog audio only.

Activates/deactivates the reception of the emergency alert message.

Displays the received emergency alert message list.

ENGLISH

HD Radio™ tunerHD Radio™ tuner

[S]/[T]

K]/

[CH [CHJ]

Searches for a station.

• The search method differs according to the selected seek mode (see page 20).

Selects a sub-channel when receiving an HD Radio multicast channel.

Selecting a station/channel by specifying

frequency/channel number—Direct Search

You can search for a station by entering the desired frequency or channel number.

1 Display the <10Key Direct> screen.

On the source control screen, touch as follows:

2 Select a search method ([FREQ]: by

frequency/[CH]: by channel) ( frequency or channel number ( start searching (

3).

1), enter the

2), then

Storing preset stations in the memory

You can preset 15 stations for FM and 5 stations for AM.

Automatic presetting — AME (Auto

Memory)

1 Select the band.

On the source control screen, touch as follows:

2 Start automatic presetting.

A confirmation message appears. Touch [Yes]. The local stations with the strongest signals are found and stored automatically.

Manual presetting

1 Select the band, then tune in to a station

you want to store.

• See “Playback information on the source control screen” on page 20 for details.

2 Display the preset list.

On the source control screen, touch as follows:

3 Select a preset number to store into.

(Hold)

The station selected in step 1 is stored into the preset number you have selected.

To hide the preset list: Touch [ ] on the preset list.

• Touch [BS] to delete the last entry.

ENGLISH

HD Radio™ tunerHD Radio™ tuner

Selecting a preset station

1 Select the band, then display the preset

station list.

On the source control screen, touch as follows:

Receiving emergency alert

When you receive an emergency alert message, the following screen is displayed.

Radio Radio

(Only for DDX6018BT/DMX6018BT/DDX5018BT/ DDX595/DDX575BT/DDX718WBTL/DMX718WBTL)

Listening to the radio

Playback information on the source control

screen

2 Select a preset station.

To hide the preset list: Touch [ ] on the preset list.

Receiving emergency alert

You can receive an emergency alert message while listening to another source.

Activating emergency alert reception

ENGLISH

[Snooze] The same emergency alert message will

not interrupt again for 10 minutes.

[Ignore] The same emergency alert message will

not interrupt again for 12 hours.

Displaying the received emergency alert

messages

You can check the emergency alert messages up to 10.

FM 01

FM 02

FM 03

FM 04

E.g. Radio source control screen for DDX6018BT

1 Displays/hides other available operation keys* 2 Preset no. 3 Changes the seek mode for [S]/[T]

• AUTO1 (Initial): Auto search

• AUTO2: Tunes in preset stations one after another

• MANUAL: Manual search

* See the “Operation keys on source control screen” on page 23.

+ 56 hidden pages

Kenwood DDX795, DDX595, DDX775BH, DDX5018BT, DDX6018BT Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual