Kenmore 116.36622501 Owner's Manual
Owner's Manual
Manual Del Propietario
Vacuum Cleaner
Aspiradora
Model, Modelo
CAUTION:
Read and follow all
safety and operating
instructions before first
use of this product.
CUIDADO:
Lea y sigue todas las
instrucciones de operaci6n
y seguridad antes del uso de
este producto.
116.36622
116.36623
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
www.sears.com
Printed in Mexico
Part No. CO1ZCRD1OUO_-KCO1ZCRDZ_UO Impresoen Mexico
Before Using Your New
Vacuum Cleaner .................... 2
Kenmore Vacuum Cleaner Warranty ... 2
Important Safety Instructions ......... 3
Parts and Features .................. 4
Assembly Instructions ............. 5-6
Operating Instructions ............... 6
Cord Release ....................... 6
Releasing the Handle ................. 7
Touch Control ...................... 7
Pile Height Selection and Setting ........ 8
Carpet/Bare Floor Selector ............. 8
Attachments ..................... 9-10
Attachment Use Table ............... 11
Please read this guide. It will help you assemble and operate your new Kenmore vacuum
cleaner in the safest and most effective way.
For more information about vacuum cleaner care and operation, call your nearest Sears store.
You will need the complete model and serial numbers when requesting information. Your vacu-
um cleaner's model and serial numbers are located on the Model and Serial Number Plate.
Use the space below to record the model number and serial number of your new Kenmore
vacuum cleaner.
Model No.
Vacuuming Tips .................... 11
Performance/Safety Features ....... 12-13
Vacuum Cleaner Care ............... 14
Vacuum Cleaner Storage ............. 14
Cleaning Exterior and Attachments ...... 14
Dust Bag Replacement .............. 15
Motor Safety Filter Cleaning ........... 16
Exhaust Filter Replacement ............ 16
Belt Changing and Agitator Cleaning . .17-19
Light Bulb Replacement .............. 20
Clog Removal ..................... 21
Troubleshooting .................... 22
Requesting Assistance Or Service back page
Serial No.
Date of Purchase
Keep this book and your sales check (receipt) in a safe place for future reference.
ONE YEAR FULL WARRANTY ON KENMORE VACUUM CLEANER
This warranty is for one year from the date of purchase, and includes only private household
vacuum cleaner use. During the warranty year, when this vacuum cleaner is operated and
maintained according to the owner's manual instructions, Sears will repair any defects in
material or workmanship free of charge.
This warranty excludes vacuum cleaner bags, belts, light bulbs, and filters, which are
expendable parts and become worn during normal use.
For warranty service, return this vacuum cleaner to the nearest Sears Service Center in
the United States.
This warranty applies only while this product is in use in the United States. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., D/817 WA, Hoffman Estates, IL 60179
2
Your safety is important to us. To reduce the risk
AWARNING:
of fire, electrical shock, injury to persons or
damage when using your vacuum cleaner, follow
basic safety precautions including the following:
Read all instructions in this manual before
assembling or using your vacuum cleaner.
Use your vacuum cleaner only as
described in this manual. Use only with
Sears recommended attachments.
Disconnect electrical supply before ser-
vicing or cleaning out the brush area.
Failure to do so could result in the brush
unexpectedly starting, causing personal
injury from moving parts.
Do not leave vacuum cleaner when
plugged in. Unplug from outlet when not in
use and before performing maintenance.
To reduce the risk of electrical shock - Do
not use outdoors or on wet surfaces.
Do not allow to be used as a toy. Close
attention is necessary when used by or
near children.
Do not use with a damaged cord or plug. If
vacuum cleaner is not working as it should,
has been dropped, damaged, left outdoors,
or dropped in water, return it to a Sears
Service Center.
Do not pull or carry by cord, use cord as a
handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run
cleaner over cord. Keep cord away from
heated surfaces.
Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
Do not handle plug or vacuum cleaner with
wet hands.
Do not put any objects into openings.
Do not use with any opening blocked; keep
free of dust, lint, hair, and anything that may
reduce air flow.
Keep hair, loose clothing, fingers, and all
parts of body away from openings and
moving parts.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
Do not put on chairs, tables, etc. Keep on
floor.
Do not use vacuum cleaner to pick up
flammable or combustible liquids (gaso-
line, cleaning fluid, perfumes, etc.), or use
in areas where they may be present. The
fumes from these substances can create a
fire hazard or explosion.
Do not pick up anything that is burning or
smoking, such as cigarettes, matches, or
hot ashes.
Do not use vacuum cleaner without dust
bag and/or filters in place.
Always replace the dust bag after vacuum-
ing carpet cleaners or freshener, powders,
and fine dust. These products clog the fil-
ters, reduce airflow and can cause damage
to the vacuum cleaner. Failure to replace
the dust bag could cause permanent dam-
age to the cleaner.
Do not use the vacuum cleaner to pick up
sharp hard objects, small toys, pins, paper
clips, etc. They may damage the cleaner or
dust bag.
Unplug before connecting Handi-mate Jr.®
You are responsible for making sure that
your vacuum cleaner is not used by anyone
unable to operate it properly.
SAVE THESE INSTRUCTIONS
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your
cleaner is intended for Household use. Read this Owner's Manual carefully for important
use and safety information. This guide contains safety statements under warning and cau-
tion symbols.
itisimportanttoknowyourvacuumcleaner'spartsandfeaturestoassureitsproperandsafe
use.Reviewthesebeforeusingyourvacuumcleaner.
Item Part No. Part No.
In U.S. In Canada
Headlight Bulb 20-5248
Exhaust Filter 20-86889 20-40324
Dust Bag 20-50690 20-50510
Belt 20-5275 20-40096
Handle
Upper Cord Hook
Combination
Brush
Tool
Handi-Mate Jr. ®_
Telescopic
Wand
Touch
Control
Carrying
Handle
Upper Hose
Extension
Hose
Cover
(Filter Inside)
Release
Pedal
Extension
Release Lever
Motor Protector
(Behind Hose)
Wand Holder
Furniture
Guard
Carpet/Bare
Floor Selector
Please pay special attention to these hazard alert boxes, and follow any instructions I
,_ given. WARNING statements alert you to such hazards as fire, electric shock, burns
and personal injury. CAUTION statements alert you to such hazards as personal
injury and/or property damage.
I
I
WARNING
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete. Failure
to do so could result in electrical
shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover of
the separate REPAIR PARTS LIST. Use
this list to verify that you have received all
the components of your new Kenmore
vacuum cleaner.
HANDLE ASSEMBLY
Remove the combination brush from
the handle to expose the handle mount-
ing hole.
Remove the handle screw from the body
of the vacuum cleaner.
Position the handle assembly as shown in
the illustration below.
When installing the handle, firmly press
the handle onto the body. Secure with
handle screw provided.
Begin to tighten the screw with your fin-
gers. It may be necessary to adjust the
handle slightly.
Using a screwdriver, tighten handle screw.
Reinstall combination brush.
Electrical
Connection
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw in place.
CORD ASSEMBLY
Make sure the quick release upper cord
hook is in the upright position. Remove
the wire tie from the power cord.
Make sure the
power cord is
placed into the lock-
ing notch on the
body as shown. This
helps keep the
power cord from
under the vacuum
cleaner agitator.
Notch
Power
lug
Assembly
Handle
Screw
Wrap the power cord around the quick
release cord hook and the carrying handle.
Lock the power cord plug onto the power
cord.
HANDI-MATE JR.@
For operation of Handi-MateJ_® /l_l_
Htond_Me ate J'® __ _
TO INSERT HANDI-MATE JR _'
Place Handi-Mate Jr.® intothe storage
compartment.
Rotate the Handi-Mate Jr.® back untilit
snaps intoplace.
TO REMOVE HANDI-MATE JR._
Rotate Handi-Mate Jr.® out of the storage
compartment.
OPERATING INSTRUCTIONS
TELESCOPIC WAND
PLACEMENT
Place the telescopic wand in the wand
holder. Place the crevice tool in the top of
the telescopic wand.
lipi c
1. Turn the quick
release upper
cord hook to
either side and
down to release
the power cord.
kWARNING
To reduce the risk of electric shock,
this vacuum cleaner has a polar-
ized plug (one blade is wider than
the other).
The plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified technician to install the
proper outlet. Do not change the
plug in any way.
2. Detach the Lockinl
_ower cord plug Notch
from the power cord
and pull the cord off
the quick release
upper cord hook. Power
Be sure the power
cord is still locked
into the locking notch of the upper cord
hook.
3. Plug the polarized power cord into a 120
Volt outlet located near the floor.
4. To store cord, turn upper cord hook to
the up position, then wrap cord.
IbWARNING
Personal Injury and Product Damage
Hazard
• DO NOT place hands or feet under
the unit at any time.
• DO NOT use outlets above coun-
ters. Damage from cord to items in
surrounding area could occur.
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
Note: The agitator may rotate when the vac-
uum cleaner is in the upright position.
OFF - Turns OFF the vacuum cleaner
(suction) motor.
ON - Turns ON the vacuum cleaner motor
to HIGH suction level for cleaning of most
carpets and rugs. In order to get MEDIUM
and LOW suction levels for cleaning, press
the SUCTION button to cycle the vacuum
cleaner motor through MEDIUM, LOW,
and HIGH suction levels respectively.
SUCTION - Changes the suction level of
the vacuum cleaner motor. If the unit is
OFF, pressing the SUCTION button turns
ON the vacuum cleaner motor to HIGH
suction level for cleaning of most carpets,
rugs, and fabrics. If the unit is ON, press-
ing the SUCTION button cycles the vacu-
um cleaner motor through suction levels.
To select a pile height setting:
Turn off vacuum cleaner. Select a pile
height setting by tilting the cleaner back
until the front wheels are lifted slightly off
the floor.
Slide the adjustment lever to the correct
setting.
There are four (4) pile height settings on
the vacuum cleaner. Use the LOW setting
for most low-pile carpets and bare floor
cleaning. Use the HIGH setting for high-
pile carpets like shag carpet, scatter rugs,
etc. Use the other settings as needed for
carpet heights in between.
Bare floor setting: Slide the carpet/bare
floor selector all the way back and down
toward the bottom of the nozzle until it locks
into place.
in this position the brush assembly does not
revolve. This setting should be used for
cleaning hardwood and tile floors and when
any attachments (tools) are used.
Carpet setting: Slide the selector all the
way forward and up to the carpet
position.
in this position the brush assembly will turn.
When carpets are being cleaned the selec-
tor should be in this position.
CAUTION
Do not allow vacuum cleaner to remain
in one spot for any length of time
when the agitator is turning. Damage
to carpet may occur.
IbCAUTION
Do not allow vacuum cleaner to remain
in one spot for any length of time
when the agitator is turning, Damage
to carpet may occur.
Note: For longer belt life, turn vacuum
cleaner off before moving selector. Failure
to do so can cause the belt to rub on the
selector shaft and may result in the belt
becoming hot and creating a burning rubber
smell.
Attention: Refer to your carpet manufac-
turers cleaning recommendations. Some
more delicate carpets may require that they
be vacuumed with the agitator turned off, to
prevent carpet damage.
To Bare FlOor
Position I
Floor Selector
TELESCOPIC WAND WITH
SUCTION CONTROL SLIDE
1. Remove the lower end of the extension
hose from the wand holder by grasping
the hose collar, twisting, and pulling
straight up.
Combination
Brush
Handle
Extension
Release Lever
.....Crevice
Tool
TO USE ATTACHMENTS
Place the carpet/bare floor selector in the
bare floor setting by rotating the selector
back and down to the bare floor setting.
See CARPET/BARE FLOOR SELECTOR
section.
Remove the lower end of the extension
hose from the wand holder by grasping the
hose collar, twisting, and pulling straight up.
2. Remove the telescopic wand from the
wand holder.
3. Remove the crevice tool from its stor-
age position in the wand. Turn the lock-
ing ring to the UNLOCK position.
1. Crevice
Tool
2. Telescopic
3. Hose
Collar
Wand
Rotate the extension hose release lever
down if maximum reach is needed.
IbWARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the unit. Failure to do
so could result in electrical shock or
personal injury from vacuum cleaner
suddenly starting,
Extend the wand to its full length. Turn the
locking ring to the LOCK position. Attach
the wand onto the open end of the hose.
Lower_-_ _ Suction
Wand_'_r_ Control Slide
f
\ _._<_ Locking Ring I
_Unlock _,_ Upper
Align the tabs on the wand with the "J"
slots in the hose. Push the wand into the
hose and twist to the right to lock.
Raised
Tab
Telescopic l
To achieve maximum reach with the
attachments, add the crevice tool to the
end of the wand by inserting and twisting
slightly.
The combination brush can be attached
directly to the wand.
b Brush_ ......
Use the brush holder without the brush for
greater suction on furniture cushions or
stairs. Use brush holder with brush for
cleaning loose surfaces such as drapes.
Combination _ _
Brush BrushS
Holder
Wand
Suction
Wand
Tool
TO OPERATE SUCTION
CONTROL SLIDE
Telescopic Wand
When using attachments for cleaning
draperies, small rugs with low pile and
other delicate items, twist the suction con-
trol slide to the open position. This slide is
located on the telescopic wand, close to
the hose.
Suction
Control This will reduce
suction for ease of
cleaning.
Note: Return suction control slide to the
closed position for normal cleaning.
CAUTION
When using attachments, be careful
not to overextend the stretch hose
when reaching. Trying to reach beyond
the hose stretch capability could cause
the vacuum cleaner to tip over.
TO STORE ATTACHMENTS
Remove the combination brush. Snap into
appropriate storage location.
Remove crevice tool from the wand by twist-
ing. Lay aside.
Remove the telescopic wand from the hose.
Twist the wand to the left and pull from the
hose end.
Unlock the wand by turning the wand lock-
mg ring to the UNLOCK position.
Slide the lower wand into the upper wand.
Turn the wand locking ring to the LOCK
3osition.
Place the crevice tool down into the com-
3ressed wand. Place the telescopic wand in
the wand holder
CAUTION
DO NOT pull the vacuum cleaner around
the room by the hose. Property damage
or personal injury could result.
10
ATTACHMENT Furniture*
CLEANING AREA
Between
Cushions*
Drapes*
FloorsStairs
CREVICE TOOL _ 4
COMBINATION BRUSH ** _ 4
Handi-Mate Jr.® _ 4
* Always clean attachments before usH_gon fabrics.
**Use the brush holder without the brush for greater suction on furniture cushions or stairs. Use
brush holder with brush for cleaning loose surfaces such as drapes.
Carpet edges
Guide either side or the front of the nozzle
along a baseboard.
Stairs
Put handle in full upright position. Place
the carpet/bare floor selector in the bare
floor position. Use the crevice tool or com-
bination brush.
Unit Tipping
When using the attachments keep the
extension hose release lever in the locked
position when possible. This helps to keep
the vacuum cleaner from tipping over
when stretching the hose. If additional
hose is needed then unlock the release
lever and pull out additional hose. Use
caution not to tip over vacuum cleaner.
Place the carpet/bare floor selector in the
bare floor position. Use the crevice tool or
combination brush.
¢
¢
J = Applicable
, WARNING
Personal Injury Hazard
Use care if vacuum cleaner is placed on
stairs. If it falls, personal injury or prop-
erty damage could result.
For best cleaning results, keep the airflow
passage clear.
Unplug the vacuum cleaner from the outlet
before checking.
¢
¢
¢
11
MOTOR PROTECTION
SYSTEM
Motor Protector
This vacuum cleaner has a motor protector
by-pass valve which automatically opens to
provide cooling air to the vacuum cleaner
motor when a clog prevents the normal
flow of air to the motor. The by-pass valve
opens to prevent motor overheating and
possible damage to the vacuum cleaner.
You will notice a change of sound as air
rushes through the valve opening.
Check for and remove clogs, replace
bag if necessary. See page 19, CLOG
REMOVAL section. Also check and
replace any clogged filters.
NOTE: The motor
protector may open
when using
attachments or
when cleaning new
carpet due to
reduced airflow
caused by the
attachments
themselves or by
new carpet lint filling
the dust bag quickly.
Motor Protector
(Behind Hose)
Thermal Protector
This vacuum cleaner has a thermal
protector, which automatically trips to
protect the vacuum cleaner from
overheating, if a clog prevents the normal
flow of air to the motor, the thermal
protector turns the motor off automatically.
This allows the motor to cool in order to
prevent possible damage to the vacuum
cleaner.
To correct problem: Turn the vacuum
cleaner off and unplug the power cord from
the outlet to allow the vacuum cleaner to
cool and the thermal protector to reset.
Check for and remove clogs, replace
bag if necessary. See page 19, CLOG
REMOVAL section. Also check and
replace any clogged filters. Wait
approximately 40-50 minutes before
restarting vacuum cleaner.
Note: Do not block motor protector.
Check for and remove clogs, replace
bag if necessary. See page 19, CLOG
REMOVAL section. Also check and
replace any clogged filters.
12
DIRT SENSOR
The electronic dirt sensor is a feature
which will detect particles as they pass
through the vacuum cleaner.
The dirt sensor indicator is located on the
front of the vacuum cleaner above the dust
cover.
A red light indicates dirt is being picked up
by the vacuum cleaner.
OPERATION
IbWARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before per-
forming maintenance to the unit. Failure
to do so could result in electrical shock
or personal injury from vacuum cleaner
suddenly starting.
TO CLEAN DIRT SENSOR OPTICS
The dirt sensor optics consist of two optic
cells located inside the dust bag port.
Occasionally, it may become necessary to
clean the two optic cells to assure
maximum performance.
It is recommended the optic cells be
cleaned:
• When the red light stays on
continuously.
• When dirt or dust adheres to the
optic cells.
• Whenever the dust bag is replaced.
To clean the sensor, wipe the optic cells
with a soft, dry cloth. Never use cleaners
or liquids as they can help speed the
recoating of the optic cells and make it
necessary to clean them much sooner than
normal. The dirt sensor area can be
reached by removing the dust bag.
Optic Cells
As you vacuum, the red indicator lights will
come on and stay on as long as the sensor
detects a high concentration of particles
passing through the vacuum cleaner.
13
VACUUM CLEANER CARE
Always follow all safety precautions when
performing maintenance to the vacuum
cleaner.
Gather the cord and wrap it loosely around
the upper and lower cord hooks. Lock power
cord plug onto the power cord.
Store the vacuum
cleaner in a dry,
indoor area, on
the floor with the
handle locked in
the upright posi-
tion.
I=WARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before ser.
vicing or cleaning the unit, Failure to dc
so could result in electrical shock or per.
sonal injury from cleanersuddenlystarting,
kWARNING
Electrical Shock And Personal Injury
Hazard
Wrapping the cord too tightly puts stress
an the cord and can cause cord damage,
A damaged cord is an electrical shock
hazard and could cause personal injury
or damage,
Unplug cord from wall outlet. DO NOT drip
water on vacuum cleaner.
Clean exterior using a clean, soft cloth that
has been dipped in a solution of mild liquid
detergent and water, then wrung dry. Wipe
dry after cleaning.
To reduce static electricity and dust build-
up, wipe outer surface of vacuum cleaner
and attachments.
Wash attachments in warm soapy water,
rinse and air dry. Do not clean in dish-
washer.
CAUTION
Do not use attachments if they are
wet. Attachments used in dirty areas,
such as under a refrigerator, should
not be used on other surfaces until
they are washed. They could leave
marks.
14
Loading...