Selector Guide
Plug-In Modules for 2700, 2701,
2750 Integra Mainframes
Module Selector Guide
This selector guide may prove helpful in identifying the best module for a specific application. Install up to
five modules at a time in the Model 2750 mainframe or two modules in the Model 2700 or 2701 mainframe.
Modules can be disconnected from internal DMM for routing external signals.
Max.
# Analog Type of Max. Switched Contact Switch
Module Inputs Configuration Connector Voltage Current Bandwidth Life 1 Speed Other
7700 20 Multiplexer 1×20 or Screw 300 V 1 50 MHz 108 3 ms Maximum power = 125VA.
w/CJC two 1×10 terminals 2 current measure channels.
7701 32 Multiplexer 1×32 or D-sub 150 V 1 A 2 MHz 108 3 ms Maximum power = 125VA.
two 1×16
7702 40 Multiplexer 1×40 or Screw 300 V 1 A 2 MHz 108 3 ms Maximum power = 125VA.
two 1×20 terminals 2 current measure channels.
7703 32 Multiplexer 1×32 or D-sub 300 V 500 mA 2 MHz 108 1 ms Reed relays.
two 1×16
7705 40 Independent N/A D-sub 300 V 2 A 10 MHz 108 3 ms Maximum power = 125VA.
SPST
7706 20 Multiplexer 1×20 or Screw 300 V 1 A 2 MHz 108 3 ms 2 analog outputs.
w/CJC two 1×10 terminals 16 digital outputs.
Maximum power = 125VA.
7707 10 Digital I/O/ 1×10 or D-sub 300 V 1 A 2 MHz 108 3 ms 32 digital I/O.
Multiplexer two 1×5 Maximum power = 125VA.
7708 40 Multiplexer 1×40 or Screw 300 V 1 A 2 MHz 108 3 ms Maximum power = 125VA.
w/CJC two 1×20 terminals
7709 48 Matrix 6×8 D-sub 300 V 1 A 2 MHz 108 3 ms Connects to internal DMM.
Daisy chain multiple cards
for up to a 6×40 matrix.
Maximum power = 125VA.
Use with Integra Series mainframes: 2700, 2701, 2750
7710 20 Multiplexer 1×20 or Removable 60 V 0.1 A 2 MHz 1010 0.5 ms Solid state relays, 60V max.
w/CJC two 1×10 screw 500 channels/second scan rate.
terminals
7711 8 Multiplexer Dual 1×4 SMA 60 V 0.5 A 2 GHz 106 10 ms Insertion loss <1.0dB @ 1GHz.
VSW R <1.2 @ 1GHz.
7712 8 Multiplexer Dual 1×4 SMA 42 V 0.5 A 3.5 GHz 106 10 ms Insertion loss <1.1dB @ 2.4GHz.
1. No load contact life. See card data sheet for additional specifications.
Use with Integra Series mainframes: 2700, 2701, 2750
Integra Plug-In Module Accessories
Module Connector Type Supplied Accessories Available Accessories
7700 Oversized Screw Terminal Strain Relief 7401 T/C wire
7701 50-pin female D-sub & 25-pin fema le D-sub 7789 connector kit 7790 connector kit, 7705-MTC-2 & 7707-MTC-2 cables
7702 Oversized Screw Terminal Strain Relief —
7703 Two 50-pin female D-sub 7788 connector kit 7705-MTC-2 cable
7705 Two 50-pin female D-sub 7788 connector kit 7705-MTC-2 cable
7706 Screw Terminal Strain Relief 7401 T/C wire kit
7707 50-pin male D-sub & 25-pin female D-sub 7790 connector kit 7789 connector kit, 7705-MTC-2 & 7707-MTC-2 cables
7708 Oversized Screw Terminal Strain Relief 7401 T/C wire kit
7709 50-pin female D-sub & 25-pin female D-sub 7790 connector kit 7789 connector kit, 7705-MTC-2 & 7707-MTC-2 cables
7710 Quick Disconnect Screw Terminal Strain Relief 7401 T/C wire kit
7711 SMA —
7712 SMA — 7712-SMA-N adaptor, 7712-SMA-1 & S46 -SMA-0.5,-1 SMA cables
1.888.KEITHLEY
(U.S. only)
www.keithley.com
7711-BNC-SMA and 7712-SM A-N adapters, 7712-SM A-1 and
S46-SMA-0.5, -1 SMA cables, 7051-2, -5,- 10 BNC cables
A GREATER ME ASURE OF C ONFIDENC E
DIGITAL MULTIMETERS & SYSTEMS
Loading...