Keating Of Chicago 2006 series, 10x11 BB, 14 BB, 18 BB, 20 BB User Manual

1-800-KEATING

www.keatingofchicago.com

Users Manual

INSTANT RECOVERY®ELECTRIC FRYER SERIES 2006

READ AND SAVE THIS MANUAL FOR FUTU RE R EFE RENCE.

Keep this manual for training new personnel.

INTROD UCTION

GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

STAN DARD FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

MODEL VARIATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

INSTALLATION

DAMAGE DURING SHIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

DROP-IN INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

POSITIONING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

LEVELING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

RESTRAINING DEVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

ELECTRICAL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

WIRE SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

OPERATING THE FRYER

FILLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

MELTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

COOKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6

SHUTDOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

DRAINING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7

CLEANING AND BOIL-OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8

ELECTRONIC TIMERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MAINTENANCE

WARRANTY REPAIRS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

PREVENTIVE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

OIL BREAKDOWN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

LIMITED CALIBRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

THERMOSTAT BULB POSITIONING . . . . . . . . . . . . . . . . . . . . . . . .9

SERVICE DIAGNOSIS

GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

TROUBLE SHOOTING CHARTS . . . . . . . . . . . . . . . . . . . . . . .10-11

PARTS LIST

ORDERING PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

WARNING AND OPERATING PLATES . . . . . . . . . . . . . . . . . . . . .12

ELECTRIC FRYER PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

ELECTRIC FRYER ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

BB CONTROL PANEL PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . .14

TS CONTROL PANEL PARTS LIST . . . . . . . . . . . . . . . . . . . . . .15-17

CPU CONTROL PANEL PARTS LIST . . . . . . . . . . . . . . . . . . . .18-19

BASKET-LIFT HOUSING AND

ROLLER GUIDE & PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . .20-21

WIRING D IAGRAM S

SINGLE BASKET LIFT POWER SUPPLY BOX . . . . . . . . . . . . . . .22

BB WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23-28

TS WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28-35

CPU WIRING DIAGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-36

FRYER SPECIFICATIONS

BB MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

TS MODELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

CONTENTS:

IMPORTANT:

Keep a copy of your bill of sale. The date on the bill establishes the warranty period should service be required. If service is performed, it is in your interest to obtain and keep all receipts. Keating commercial fryers are not intended for household use.

The Owner’s Guide provides specific operating instructions for your model. Use the Instant Recovery

®

Electric Fryer only as instructed in this Owner’s Guide.

electricFryer2006

06/12

part# 057641

RECORD THE MODEL AND SERIAL

NUMBERS OF THIS INSTANT RECOVERY

®

ELECTRIC FRYER IN THE SPACES PROVIDED.

SERIAL NO. ______________________________

MODEL NO. _____________________________

KEEP THESE NUMBERS FOR FUTURE REFERENCE.

i

This operating, installation, and service manual should be given to the user. The operator of the fryer should be familiar with the functions and operation of the fryer. This manual must be kept in a prominent, easily reachable location near the fryer.

Keating of Chicago, Inc. (manufacturer) reserves the right to change specifications at any time.

*As continuous product improvement occurs, specifications may be changed without notice.

IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.

FOR YOUR SAFETY, DO NOT STORE GASOLINE OR ANY OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

POST THIS LABEL IN A

PROMINENT LOCATION ON

YOUR UNIT.

WARNING

Improper installation can cause damage, injury or death.

WARNING

Do not store flammable

liquids near this or any

other appliance.

1

INTRODUCTION

GENERAL

Instructions in this manual should be read thoroughly before attempting to operate this Keating Electric Fryer. All installation and service on Keating equipment must be performed by qualified, certified, licensed and/or authorized installation or service personnel.

Operating information for Keating equipment has been prepared for use by qualified and/or authorized personnel.

Keating equipment is made in the U.S.A. and has American sizes of hardware. All metric conversions are approximate.

STANDARD FEATURES

 Highly polished stainless steel fryer vessel  Highly polished stainless steel front  Highly polished stainless steel elements  Highly polished stainless steel thermostat bulb  Highly polished stainless steel Hi-Limit sensor  True Cold Zone for proper sedimentation  Grid screen over elements  Melt cycle  1” full port front drain valve on 10x11 and 14;

1-1/4” for 18 and larger

 High temperature limit control with manual reset  Patented accurate temperature control system ±7°F  Ideal 35” working height  One pair of split baskets or one full-size basket (18”

model only)

 Circuit breaker protection for 208-240V 10×11 to

34×24 Models.

STANDARD ACCESSORIES

 Keating Klenzer Sample  Keating Sea Powder Sample  Drain clean out rod

STANDARD FRYERS

 Sizes: 10×11 to 34×24  Oil capacity 30 to 210 pounds  NSF, ETL and ETLS listed.

MODEL VARIATIONS

BB Model: BB Model Fryers feature Power On

indicating light, a melt cycle and an electric stainless steel thermostat. The 14BB model can cook up to 72 lbs. of frozen fries or 75 lbs. of chicken per hour.

TS Model: TS Model Fryers have the highest input of all Keating fryers. The TS Model features a melt cycle, and electric stainless steel thermostat, two electronic timers and three indicating lights which display the status of the fryer’s operation. The 14TS Model can cook up to 90 lbs. of frozen fries or 75 lbs. of chicken per hour.

TS Basket-Lift Model: TS Basket-Lift Model Fryers come with all the same features as the TS Model. The Basket-Lift mechanism lowers the baskets of food into the oil when the timer button is pressed and raises the baskets when the cooking cycle is complete. Split baskets are used for all models.

CM Model: BB and TS Counter Model Fryers are equipped with all of the same features as the BB and TS Models respectively, but take up less than three square feet of counter space. The 10x11CM Model can cook up to 36 lbs. of frozen fries per hour and the 14CM Model can cook up to 72 lbs. per hour.

CPU Model: CPU Model Fryers have the same input as the TS Models, and features an over max temperature light. A programmable computer replaces the two timers and thermostat.

SAFETY PRECAUTIONS

THIS SYMBOL WARNS YOU THAT SERIOUS BURNS OR OTHER INJURIES MAY RESULT IF SAFETY INSTRUCTIONS ARE NOT FOLLOWED.

 This service manual should be retained in a safe place

for future reference. The installation of your new fryer must conform to current codes, with the current National Electrical Codes and regulations as applicable.

 Your ventilation hood, when installed, must conform to

the current standards.

 You must maintain this appliance free and clear from

combustibles.

 Adequate clearance for servicing and proper operation

must be maintained. Your fryer is designed to be serviced from the front.

 Keating commercial fryers are not intended for household

use.

 ALWAYS instruct new employees on proper fryer operation.  A fryer should be operated ONLY by properly trained

personnel.

 ALWAYS turn fryer off each night.  ALWAYS turn fryer off at customer power panel before

servicing.

 NEVER leave a fryer unattended during operation.  NEVER move a fryer when full of hot oil.  NEVER introduce objects or liquids into fryer, while

operational, which are not designed or made for cooking.

 THIS FRYER MAY NOT BE ALTERED, MODIFIED OR

CHANGED IN ANY WAY.

2

IMPROPER INSTALLATION, SERVICE OR MAINTENANCE CAN CAUSE PROPERTY DAMAGE, INJURY OR DEATH. READ THESE INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS THOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT.

INSTALLATION

This fryer MUST be installed, inspected, calibrated and serviced by qualified and/or certified and/or licensed service personnel - you may void your Keating warranty if installation is not completed per local, national and Keating specifications. Contact your dealer for assistance.

IF EQUIPMENT ARRIVES DAMAGED

Keating does not assume responsibility for loss or damage incurred in transit.

IMPORTANT

This merchandise has been thoroughly inspected and carefully packed before leaving our plant. Responsibility for its safe delivery was assumed by the carrier at the time of shipment. Claims for loss or damage to the contents should, therefore, be made upon the carrier, as follows:

CONCEALED LOSS OR DAMAGE

Concealed loss or damage means loss or damage which does not become apparent until the merchandise has been unpacked. The contents may be damaged in transit due to rough handling even though the carton may not show external damage. When the damage is discovered upon unpacking, make a written request for inspection by the carrier’s agent within fifteen days of the delivery date. Then file a claim with the carrier since such damages are the carrier’s responsibility. By following these instructions carefully, we guarantee our full support of your claims to protect you against loss from concealed damage.

VISIBLE LOSS OR DAMAGE

Any external evidence of loss or damage must be noted on the freight bill or express receipt, and signed by the carrier’s agent. Failure to adequately describe such external evidence of loss or damage may result in the carrier refusing to honor a damage claim. The form required to file such a claim will be supplied by the carrier.

DO NOT RETURN DAMAGED MERCHANDISE TO KEATING. FILE YOUR CLAIM AS ABOVE.

INSTALLATION

Installation must conform with local codes or, in absence of local codes, with the current National Electrical Codes and regulations as applicable.



NOTE: For safety purposes, all Hi-Limit controls are

manually reset. Always check the Hi-Limit reset button before attempting to use the fryer. It is possible that the Hi-Limit button may have been accidentally activated on a new fryer while in transit.

DROP-IN FRYER INSTALLATION NOTES

1. All drop-in fryers must be 16” from any open flame.

2. Fryers must be located no more than 5” from counter top front.

3. Cabinet must be reinforced to support full weight of fryer in use (fryer, oil, food).

4. Fryers must be properly ventilated and located under an exhaust hood.

DROPPING THE FRYER INTO THE COUNTER TOP

It is only necessary to place the fryer in such a position that the front edge overlaps the front raised edge of the opening.

Push the fryer forward as far as it will go holding the fryer on approximately a 15° angle, and then drop the rear of the fryer into its proper position lowering it down gently so you do not deform the table or equipment stand.

“A” “B”

10×11DI ELECTRIC 13” 211/4”

14DI ELECTRIC 16” 231/2”

18DI ELECTRIC 20” 29”

5/8"

CUT LINE

"A"

"B"

BEND UP 90° ON ALL SIDES TO FINAL OPENING SIZE ("A" X "B"), THEN CLOSE CORNERS BY WELDING AN INSERT PIECE (OR OTHER SUITABLE METHODS) FOR A LEAK FREE FIT.

45°

TYP.

DETERMINED BY CUTTING TOOL

USED

5/8"

1/8"

Figure 2-1

POSITIONING

The fryer must be placed under an exhaust hood with a fire retardant system. Your ventilation hood, when installed, must conform to the current standards. ALL connections and placement must comply with current local and national codes. It is the responsibility of the owner and local installer to comply with these regulations when installing the fryer.

Counter model and floor model fryers must be restrained to prevent tipping when installed in order to avoid splashing, spilling, etc. of hot liquid. The restraining method may be a manner of installation or by separate means.

LEVELING

The fryer will operate at its highest efficiency when properly leveled. Place a level on fryer vessel from side to side. For fryers on legs, the bottom foot of the leg is adjustable. Looking from the bottom of the foot, turn clockwise to decrease height or counter clockwise to increase height until level. For fryers on casters, the casters are adjustable by loosening the jam nut and turning the caster in or out. When the desired level is reached, tighten the jam nut. Adjustments of more than

3

/

4” are not recommended on any caster. The same

procedure should be followed to level the fryer from front to back.

Figure 2-2

RESTRAINING DEVICES

On fryer installations with casters, casters and jam nuts must be completely tightened. Adequate means must also be provided to limit the movement of the appliance.

ELECTRICAL

CONNECTION

The Keating Instant Recovery®Electric fryer is equipped with a three wire terminal block for customer connections. The terminal block is located behind the fryer door on the right side behind a panel (held in place by two screws). Compare the fryer terminal connections to the appropriate wiring diagram for the fryer (see pages 22 thru 35) to see if the fryer is connected three phase or single phase. All wires/cords, plugs, receptacles and circuit breakers must be sized adequately for the full load rating of the fryer as specified by local codes, or in the absence of local codes, by the current National and Canadian Electrical Codes as applicable.

The Keating Electric Fryer is also equipped with a grounding lug next to the terminal block. For proper grounding procedures, see local codes or, in the absence of local codes, by the current National and Canadian Electrical Codes as applicable.



NOTE: A copy of your wiring diagram is shipped with

your equipment.



NOTE: For fryers rated at 208-240 volts, the

amperage ratings marked on the nameplates of the fryers are listed at 240 volts as required by ETL. If your fryer is to be fed by a 208 or 220 volt system, consult the Keating Fryer Specifications on pages 36 and 37 to determine the full load rating of the fryer.



NOTE: Fryers with Safe & Easy®Filters (model

BBSE or TSSE) or Central Filters will have separate 120 volt control circuit connections.



NOTE: A copy of your wiring diagram is located on

the inside of the door.



NOTE: A hole has been punched in the rear of the

fryer cabinet for a cord or conduit exit. If a cord is used, the National Electrical Code, ETL standards and most local codes require a bushing or strain relief (not provided by Keating) to protect the cord.

3

LEVEL

LEG

CASTER

4

WIRE SIZE

Use the table below to help determine the proper wire size for electrical service hook-up. Use the largest amp value of the three conductors for 3-phase installations when using the table. The amperage values for a product can be found on its serial number tag. Consult the National Electrical Code Handbook for additional information or to help answer questions about wire size selection.

*For runs greater than 75' up to 125', use the next wire size larger to keep the voltage drop to less than 3%. For runs greater than 125', consult the National Electrical Code Handbook to help determine the proper wire size.

**2/0 wire ambient temperature must be kept at less than 104°F (40°C).

CALIBRATION

For Calibration refer to page 8 - Calibration.

OPERATING

FILLING



NOTE: Before filling the fryer make certain the fryer

vessel is sanitized, dry and the drain valve is completely closed. Refer to figure 3-3 on page 6 for location of drain valve

.valve.

BE SURE THE HEATING ELEMENTS ARE COMPLETELY COVERED WITH OIL BEFORE SWITCHING THE FRYER ON. IF OIL LEVEL DROPS BELOW TOP OF HEATING ELEMENTS, SEVERE DAMAGE TO FRYER AND INJURY TO OPERATOR MAY RESULT.

WATER IN ANY FORM AND HOT OIL DON’T MIX!!!

Oil expands when heated. The “Max Level” line has been provided to ensure optimum cooking while ensuring the safety of the operator. Do not overfill the fryer vessel.

Figure 3-1

Fill Level Line

BB & TS, CPU and Basket-Lift Models

1. Fill the fryer vessel with oil up to the “Max Level” line.

2. If using solid shortening, remove screen and firmly pack solid shortening between the heating elements. Proceed to Melting section for instructions on use of the melt cycle.

Conductor

Current (Amps up to)

Recommended

wire size (AWG)

15 14* 20 12* 30 10* 40 8 55 6 70 4

95 2 125 0 145 2/0 165 2/0** 190 2/0**

5

MELTING

The Keating Melt Cycle safely melts solid shortening in the fryer vessel without scorching.

BEFORE APPLYING POWER TO THE FRYER, MAKE SURE THE ELECTRIC CONNECTIONS ARE SECURE AND THE FRYER HAS BEEN PROPERLY FILLED WITH OIL.

A. BB, TS and Basket-Lift Models

1. Set the thermostat to the desired temperature.

2. If using solid shortening, set Melt-Fry switch to the “MELT” position. Stay in the “MELT” cycle until the shortening has melted completely and is at the “Max Level” line before switching to the “FRY” position for cooking.

B. CPU Models

*See separate computer instructions or call 1-800-KEATING.



NOTE: During the “MELT” cycle, the elements are on

for approximately 5-7 seconds and off for approximately 50 seconds.

COOKING

Keating Instant Recovery®Electric Fryers are designed to provide maximum production efficiency and deliver high quality food products. Low-temperature cooking, highly polished stainless steel and a true COLD ZONE mean extended oil life. Follow cooking procedures below for your model.

 OPERATION OF THIS FRYER SHOULD BE LIMITED TO PERSONNEL WHO HAVE BEEN THOROUGHLY TRAINED IN OPERATING PROCEDURES.



USE ONLY KEATING APPROVED BASKETS IN YOUR FRYER. NEVER OVERFILL FRY BASKETS. DO NOT BANG BASKETS ON BASKET HANGERS OR FRYER VESSEL.



CARE SHOULD BE TAKEN WHEN LOWERING BASKETS INTO FRYER TO PREVENT SPLASHING HOT OIL FROM FRYER VESSEL.



NEVER LIFT BASKETS DIRECTLY OUT OF THE FRYER VESSEL WITHOUT DRAINING AS SEVERE INJURY MAY RESULT.



NOTE: For safety purposes, all Hi-Limit controls are

manually reset. Always check the Hi-Limit reset button before attempting to use the fryer. If the Hi-Limit has tripped, the fryer will not operate.



NOTE: For a fryer with a Central or Safe & Easy

®

Filter, always check the rear drain operating handle before attempting to use the fryer. A safety switch prevents the fryer from operating if the handle is not pushed in completely and locked into place.

A. BB Models

1. Fill fryer as described on page 4 - Filling.

2. Set Power switch to the “ON” position. “POWER

ON” light will be illuminated.

3. Set the Melt-Fry switch to “FRY.”

4. Set thermostat to the desired frying temperature

(between 325°F and 335°F).

5. When the oil reaches the desired frying

temperature, lower filled basket(s) slowly into the

hot oil.

6. When cooking cycle is complete, carefully lift

basket(s) out of oil. Place them on basket hanger

(on splashback of fryer) to allow draining of excess

oil.

6

B. TS Model

1. Fill fryer as described on page 4 - Filling.

2. Set Power switch to the “ON” position. “POWER ON” light will be illuminated.

3. Set the Melt-Fry switch to “FRY.”

4. Set thermostat to the desired frying temperature (between 325°F and 335°F).

5. When the oil reaches the desired frying temperature, the “READY TO COOK” light will illuminate.

6. Lower filled basket(s) slowly into the hot oil.

7. Set timer for left or right side basket, whichever is being lowered into oil. For programming instructions, see page 8.

8. When timer sounds, lift basket out of oil. Place on basket hanger (on splashback of fryer) to allow draining of excess oil.

C. Basket-Lift Models

1. Fill fryer as described on page 4 - Filling.

2. Set Power switch to the “ON” position. “POWER ON” light will be illuminated.

3. Set the Melt-Fry switch to “FRY.”

4. Set thermostat to the desired frying temperature (between 325°F and 335°F).

5. When the oil reaches the desired frying temperature, the “READY TO COOK” light will illuminate.

6. Fill basket(s) to proper level and place on upper bar of lift rod(s).

7. Set timer(s) to desired cooking time. For programming timers see page 8.

8. Push “T1,” “T2” or “T3” buttons on timer(s). Basket(s) will automatically lower into fryer vessel.

9. When cooking cycle is complete, an audible alarm will sound and the basket(s) will raise automatically. Allow oil to drain before removing baskets.

D. CPU Model

* See separate computer instructions or call

1-800-KEATING

SHUTDOWN

A. BB, TS and Basket-Lift Models

1. Turn fryer Power switch to “OFF” position.

B. CPU Model

1. Set Main Power On/Off switch to the “OFF” position.

DRAINING

ALWAYS SHUT THE FRYER OFF COMPLETELY BEFORE DRAINING. THE FRYER SHOULD BE DRAINED ONLY UNDER THE SUPERVISION OF PROPERLY TRAINED PERSONNEL. A DRAIN PIPE AND COVERED CONTAINER SUITABLE FOR USE WITH HOT OIL SHOULD BE USED TO ENSURE THE SAFETY OF THE OPERATOR.

1. Operator should be outfitted with proper attire including:

– Oil and heat resistant gloves – Oil and heat resistant apron – Safety goggles – Oil and heat resistant footwear

Figure 3-2

Operator in safety gear

2. Turn off the fryer and open the door.

3. For front drain fryers, put approved container under drain valve. For fryers with a central filter, slide filter drawer in completely.

4. For front drain fryers, slowly turn handle forward to avoid splashing. The drain valve will be completely open after 1/4 turn.

5. For units with rear drain valves, slowly pull drain valve operating handle straight out (unhook from metal latch first). See Safe & Easy operator’s manual for instructions on how to filter.

7

Figure 3-3

Front drain valve

Figure 3-4

Safe & Easy Filter

SIDE VIEW WITH FILTER IN BATTERY AND

SIDE VIEW WITH FILTER UNDER

UNDER NO CIRCUMSTANCES SHOULD YOU PERMIT HOT OIL TO COME IN CONTACT WITH WATER OR ICE. ALL DRAINING SHOULD BE DONE UNDER THE SUPERVISION OF PROPERLY TRAINED PERSONNEL. A DRAIN PIPE AND COVERED CONTAINER SUITABLE FOR USE WITH HOT OIL SHOULD BE USED WHENEVER A FRYER IS DRAINED. ALWAYS DRAIN OIL INTO A COVERED RECEPTACLE APPROVED FOR THE TRANSPORTATION OF HOT OIL.

CLEANING AND BOIL-OUT

When cleaning and boiling out your fryer use Keating Sea Powder and Keating Klenzer to keep your fryer in top condition. Keating Sea Powder dissolves any grease build up—even carbonized grease in fryer vessels—one of the leading causes of premature oil breakdown. And once your fryer vessel is clean, use Keating Klenzer, the finest dry stainless steel polish available, to restore your Keating Instant Recovery

®

Electric fryers’ exterior to its original luster.

To avoid damaging the fryer, do not power wash, spray or hose it down while cleaning.

Figure 3-5

Keating Klenzer and Sea Powder

1. Put on safety attire. See page 6 - Draining.

2. Turn the fryer off.

3. Drain oil from fryer, see page 6. Filtering may be done at this step.

4. Remove oil container to a secure area to prevent accidental spillage.

5. Fill fryer vessel to “Max Level” line with water.

UNDER NO CIRCUMSTANCES SHOULD THE FRYER BE LEFT UNATTENDED DURING BOIL-OUT. TRAINED PERSONNEL MUST BE PRESENT DURING THE PROCEDURE TO PREVENT BOIL OVER OR TO TURN OFF THE POWER IF WATER DROPS BELOW HEATING ELEMENTS.

6. Set thermostat and turn fryer on to bring water to a gentle boil.

7. Once boil has been reached, turn fryer off.

8. Dissolve

2

/3 cup of Keating Sea Powder for every five

gallons of water and let soak for 1/

2 hour. If there is a

large build-up of carbonized grease, allow fryer to soak overnight.

Do not damage or remove thermostat bulb as this may affect the accuracy of the fryer.

9. While soaking, a natural fiber brush may be used to scrub the inside walls of fryer.

10. Drain the water and Sea Powder into a dry, suitable receptacle and remove from cooking area.

DRAIN VALVE

8

11. Spread Keating Klenzer liberally on sides of fryer vessel.

12. At this point, a non-abrasive scouring pad may be used to remove the now softened carbonized grease.

13. Thoroughly rinse fryer vessel with potable water to remove all Klenzer.

14. Prior to refilling with oil, wipe the inside of the fryer vessel making sure all water and Klenzer has been removed.

WATER IN ANY FORM AND HOT OIL DON’T MIX!!!

15. Close drain valve.

FAILURE TO CLOSE DRAIN VALVE BEFORE REFILLING THE FRYER MAY RESULT IN SERIOUS INJURY.

WHEN YOUR FRYER IS BEING USED IN CONJUNCTION WITH A CENTRAL FILTER, DISCONNECT POWER SUPPLY BEFORE RESETTING MOTOR TO PREVENT SERIOUS INJURY WHEN RESET SWITCH IS ENGAGED (SEE FILTER MANUAL).

16. Check thermostat bulb positioning - see page 9.

17. Refill the fryer with new or filtered oil.



NOTE: MSDS Sheets for Keating Klenzer, Sea

Powder & Acidox are available on-line at www.keatingofchicago.com.

ELECTRONIC CONTROL

TIMERS

The electronic timers provide a clearly visible and accurate display and are very easy to use.

ELECTRONIC TIMERS

Figure 3-6

A. PROGRAMMING

To program the timers, the unit must be in the idle mode. Press and hold the set button for approximately two seconds. The display will show “SEt”. Press T1, T2, or T3 for the cook time to be programmed. The display will show the current setting for that cook time. Use the up or down button to increment or decrement the setting. When the setting is correct, press and hold the set button again for approximately two seconds. The display will show "StO" for approximately two seconds and the timer will return to normal operation. Repeat the process as necessary for the other timers.

B. OPERATING LOGIC

When the timer is powered up, the display will show the time setting for the cook time that was operated last and the relay output contacts will be open. To start a cycle, press the desired cook time button (T1, T2, T3). The display will begin to countdown from the preset time setting and the relay output contacts will close. During the countdown the colon will flash at a onesecond rate. When the countdown has reached "00:00" the relay output contacts will open, the display will flash, and the audible alarm will sound. To cancel the audible alarm, press any button.

C. PAUSE FEATURE

To pause a cycle in progress, press any button. The relay output contacts will open, the display will flash, and the countdown will pause. To resume the countdown, press any button. The display will resume the normal countdown and the relay output contacts will close.

D. CANCELING A CYCLE

To cancel a cycle in progress press and hold any button for approximately two seconds. The relay output contacts will open and the display will show the time setting for the cook time last used.

MAINTENANCE

WARRANTY REPAIRS

Keating’s warranty begins with the date of installation. In the event that your fryer, under warranty, needs repairs other than routine maintenance or cleaning, you are requested to contact Keating of Chicago (at 1-800-KEATING) before calling a local service company.

PREVENTIVE MAINTENANCE

Preventive maintenance should be done in daily, weekly, monthly and yearly intervals as necessary. Following preventive maintenance procedures will help keep your fryer working efficiently. Proper care and servicing will lead to years of quality performance.

PREVENTIVE MAINTENANCE CHART

* High production facilities should be checked more often.

A. Oil Breakdown

As part of a “Preventive Maintenance Program”, the oil in your fryer needs to be filtered regularly to avoid breakdown. The initial investment in the frying system is less than the total overall costs of oil during the life of the fryer, and with regular filtering, you can realize substantial savings in oil costs as well as maintenance charges.

B. Limited Calibration (less than 15°F off)

Thermostat Calibration

You will need: One standard flat blade screwdriver

One accurate fryer thermometer

1. Set thermostat to desired frying temperature.

2. Allow fryer to cycle three times.

3. Place an accurate thermometer in the oil.

4. If temperature of fryer is found to be more or less than 15°F off, remove the thermostat knob. There are (4) screws holding the dial plate in place. Loosen the screws and reset the dial plate to match the thermometer reading.

DO NOT ADJUST THE THERMOSTAT SET SCREW

- IT VOIDS ANY WARRANTY ON PART.



NOTE: Locate thermometer in same position for

every calibration. Position next to upper heating element is recommended.

C. Thermostat Bulb Positioning

Keating’s patented thermostat application is accurate within ±7°F of the dial setting between 250°F and 350°F. This accuracy is attained only if the thermostat bulb is placed properly against the top element using element clamps. If the bulb is too far away from the element, the fryer will overshoot.

Overshoot: The thermostat takes a long time to cycle and then misses its preset temperature by 20°F - 40°F yielding a poor quality product.

TIME

FRAME

OPERATOR/OWNER SECTION

At least daily

• Check that the oil is up to “Max Level” line.

• Clear all baskets.

• Drain, strain or filter oil.

OPERATION

At least weekly

• Drain and clean fryer.

• Boil-out fryer.

OPERATION

At least monthly

• Check lights and controls.

• Verify Thermostat settings.

• Test Hi-Limit control.

• Verify all thermostat settings.

• Verify wire connections.

MAINTENANCE

At least yearly

QUALIFIED SERVICE PERSONNEL ONLY:

• Calibrate thermostat.

MAINTENANCE

& SERVICE

DIAGNOSIS

9

10

SERVICE DIAGNOSIS

A properly adjusted Keating Instant Recovery®Electric Fryer, with no load, will cycle “on” approximately every 21/2 to 3 minutes. Each cycle will last 15-25 seconds, ensuring that the temperature setting is held within a narrow band.

Every Keating Instant Recovery

®

Electric Fryer has a number of safety controls to ensure safe operation and

guard against component failure.

A. Trouble shooting

The following diagnosis is only to be used as a guide to qualified service personnel. Keating recommends that you use a qualified service company. Call 1-800-KEATING if you need assistance in locating a qualified service company.

PROBLEM PROBABLE CAUSE SOLUTION

Fryer won’t heat. a. No electricity to fryer (“POWER ON”

switch is off).

b. No electricity to control circuit

(models with Basket-Lift or Central Filter).

c. Fryer circuit breakers have tripped.

d. Hi-Limit has been activated.

e. Rear drain valve handle has not been

fully closed (fryers with filter only).

f. On/Off Switch is faulty.

g. Melt-Fry switch is faulty.

h. Contactor is faulty.

i. Thermostat is faulty.

a. Connect fryer to an approved source

of power.

b. Connect 120V terminal block to an

approved source of power.

c. Reset circuit breakers.

d. Push in Hi-Limit Reset button

located behind fryer door. Check calibration of thermostat and operation of Hi-Limit and contactor.

e. Fully close and latch rear drain valve

handle. Turn fryer OFF and then ON to restart.

f. Replace On/Off Switch.

g. Replace Melt-Fry Switch.

h. Replace contactor.

i. Replace thermostat.

Fryer has poor recovery or runs cold.

a. Over-filling baskets.

b. Fryer vessel overfilled with oil.

c. Thermostat out of calibration.

d. Carbon coating on elements.

e. Element is faulty.

f. Thermostat is faulty.

g. Contactor is faulty.

h. Low incoming voltage.

a. Don’t overfill baskets.

b. Fill fryer up to “Max Level” line as oil

expands when heated.

c. Calibrate thermostat. See page 9 –

Calibration.

d. Boil-out fryer. See pages 7-8 –

Cleaning and Boil-Out.

e. Replace Element.

f. Replace thermostat.

g. Replace contactor.

h. Verify proper incoming voltage.

Fryer is overheating. a. Thermostat bulb improperly placed.

b. Thermostat out of calibration.

a. Adjust bulb position. See page 9 –

Thermostat Bulb Positioning.

b. Calibrate thermostat (See page 9 –

Calibration).

11

SERVICE DIAGNOSIS (continued)

PROBLEM PROBABLE CAUSE SOLUTION

Oil in fryer vessel smokes.

a. Oil has begun to break down.

b. High carbon content in oil.

c. Dirty fryer vessel.

d. Inferior grade of oil.

e. Fryer is overheating.

a. Replace oil.

b. Filter oil completely, replace if

necessary.

c. Boil-out fryer. See pages 7-8 –

Cleaning and Boil-Out.

d. Check with oil supplier for higher

grade of oil needed for your cooking applications.

e. Check calibration of thermostat (See

page 9 – Calibration) and replace if necessary. Check if Hi-Limit trips at 425°F. If not, replace Hi-Limit.

Oil in fryer vessel boils over.

a. Baskets are overfilled.

b. Fryer vessel overfilled with oil.

c. Oil is breaking down and foaming.

d. Water in cold zone.

a. Don’t overfill baskets.

b. Fill fryer up to “Max Level” line as oil

expands when heated.

c. Replace oil.

d. Stir oil with a paddle until water boils

off. Filter oil. If water remains, let oil cool and drain a quart of it.

Contactor chatters. a. Voltage is low to fryer.

b. Contactor coil faulty.

c. Connections are loose.

d. Thermostat contacts do not close

properly.

a. Contact your electrician or the local

power company and have the incoming power checked.

b. Replace contactor.

c. Tighten connections.

d. Replace thermostat.

TS MODELS:

PROBLEM PROBABLE CAUSE SOLUTION

Basket-Lift mechanism. a. Connections are loose or timer is

faulty.

b. Actuator is faulty

c. Control circuit breaker has tripped.

d. Relay is faulty.

a. Tighten connections. Replace timer

if it will not operate.

b. Replace actuator.

c. Reset circuit breaker.

d. Replace relay.

12

PARTS LIST

ORDERING PARTS

Parts may be ordered by part number by calling Keating at 1-800-KEATING or your service company. You may also order online at Keating’s Parts Store, www.keatingofchicago.com.

Refer to the Keating Instant Recovery

®

Electric Fryer Limited Warranty for complete service and ordering

information.

The model/serial plate is attached to the inside of the front door. The serial and model numbers are necessary when ordering.

NOTE: On Drop-In fryers, the model/serial plate is attached to the top of the control panel.

WARNING AND OPERATING PLATES

All warning and operating plates on the Keating Instant Recovery®Electric Fryer should be in place at all times. If plates are damaged or lost, replace them immediately.

ELECTRIC FRYER PARTS LIST

13

ITEM DESCRIPTION MODELS PART # 10×11 14 18 20 24 34×24

2 ELEMENT CLAMP ALL 004167 2 2 2 2 2 2 3 ELEMENT SPACER ALL 004145 4 4 4 FRYER VESSEL CALL 1-800-KEATING 1 1 1 1 1 1 5 DRAIN VALVE, FRONT, 1” BB, TS 004553 1 1

DRAIN VALVE, REAR, 1” BB, TS 016341 1 1 DRAIN VALVE, FRONT 1 1/4” BB, TS 004554 1 1 1 2 DRAIN VALVE, REAR, 1 1/

4”

BB, TS 016342 1 1 1 2

DRAIN VALVE, FRONT, 2” OPTIONAL 019722 1 1 1 2

6 BASKET HANGER SEE BELOW 1 1 1 1

ITEM DESCRIPTION 10x11 14 18 20 24

6 BASKET HANGER 018553 018477 018556 018559 018562

ITEM DESCRIPTION MODELS

PART # (220V)

ELEMENT

PART # (440V)

ELEMENT

10×11 14 18 20 24 34×24

1 HEATING ELEMENT

2500 W BB 004347 3

BB 006342 3 3800 W TS 005623 004348 3 4350 W BB 004349 004350 3 6000 W BB 004353 004352 3 3

TS 004353 004352 4 4

BB 004355 022287 4 5

TS 004355 022287 5 6 6500 W TS 014493 019256 3 TEFLON RING BB, TS 004318 004318 2 PER ELEMENT 5/8” FLAT WASHER BB, TS 004319 004319 2 PER ELEMENT 5/8” - 16 BRASS LOCKNUT BB, TS 004323 004323 2 PER ELEMENT LCKWSHR, INT, #10 HI-TEMP BB, TS 011562 011562 4 PER ELEMENT RING TERM, #10 HI-TEMP BB, TS 011881 011881 2 PER ELEMENT FLAT WASHER, #10 HI-TEMP BB, TS 059502 059502 2 PER ELEMENT NUT 10-32 BB, TS 000361 000361 2 PER ELEMENT

Exploded view of heating element

wire connection hardware

Splashback

6

1

3

4

1

2

5

14

Figure 6-2 BB Control Panel 208/240V & 480V (Not shown to scale)

ITEM DESCRIPTION PART # 10×11 14 18 20 24 34×24

1 SWITCH TOGGLE SEALED ON-OFF 059141 1 1 1 1 1 1 2 INDICATING LIGHT CLEAR ROUND 28V 057863 1 1 1 1 1 1 3 SWITCH TOGGLE SEALED MELT-FRY 059143 1 1 1 1 1 1 4 THERMOSTAT KNOB, BLACK 060612 1 1 1 1 1 1 5 THERMOSTAT DIAL PLATE FRYER 250º-375º 058037 1 1 1 1 1 1 6 THERMOSTAT 031099 1 1 1 1 1 1 7 CONTACTOR 3 POLE 30 AMP 033896 2(208/480)

2(480v) 2(480v) 2(480v) 4(480v)

CONTACTOR 3 POLE 40 AMP 033898 2 CONTACTOR 3 POLE 50 AMP 033899 2 2 4 CONTACTOR 4 POLE 40 AMP 053383 2

(208/480)

8 TRANSFORMER STEP DOWN 056037 1 1 1 1 1 1 9 FAT MELT INFINITE CONTROL 037470 1 1 1 1 1 1 10 HIGH LIMIT RESETTABLE 060806 1 1 1 1 1 1 11 CIRCUIT BREAKER 16 AMP 1 POLE (208-240V) 057338 3

CIRCUIT BREAKER 32 AMP 1 POLE (208-240V) 033885 6 CIRCUIT BREAKER 40 AMP 1 POLE (208-240V) 033881 6 6 8 10 CIRCUIT BREAKER 10 AMP 1 POLE (480V) 057336 3 CIRCUIT BREAKER 16 AMP 1 POLE (480V) 057338 6

CIRCUIT BREAKER 20 AMP 1 POLE (480V) 033920 6 6 8 10 12 MAGNETIC REED SWITCH (Rear Drain Fryers Only) 053777 1 1 1 1 1 2 13 RELAY (Rear Drain Fryers Only) 030844 1 1 1 1 1 1

(Quantity Per Model)

CONTACTOR TRAY (Front View) - Front Drain Unit

CONTACTOR TRAY (Top View) - Front Drain Unit

5

6

11

10

8

7

4

3

2

1

CONTROL PANEL FRONT

12

139

15

Figure 6-3 TS Control Panel 208/240V & 480V with Rocker Switches (Not shown to scale)

ITEM DESCRIPTION PART # 10×11 14 18 20 24 34×24

1 SWITCH ROCKER ON-OFF DPST 035030 1 1 1 1 1 1 2 SWITCH ROCKER SPDT WHITE 025726 1 1 1 1 1 1 3 INDICATING LIGHT GREEN 28V 021255 1 1 1 1 1 1 4 INDICATING LIGHT RED 28V 021209 1 1 1 1 1 1 5 TIMER DIGITAL 24V/120VAC 056921 2 2 2 2 2 2 6 THERMOSTAT KNOB, BLACK 060612 1 1 1 1 1 1 7 THERMOSTAT DIAL PLATE FRYER 250º-375º 058037 1 1 1 1 1 1 8 THERMOSTAT 031099 1 1 1 1 1 1 9 FAT MELT INFINITE CONTROL 037470 1 1 1 1 1 1 10 CONTACTOR 3 POLE 30 AMP 033896 2(208/480v) 2(480v) 4(480v) 4(480v)

CONTACTOR 3 POLE 50 AMP 033899 2 4 4 CONTACTOR 4 POLE 30 AMP 053385 2

(480v)

2

(480v)

CONTACTOR 4 POLE 40 AMP 053383 2 2

11 TRANSFORMER STEP DOWN 24VAC 75VA 056037 1 1 1 1 1 1

12

HIGH LIMIT RESETTABLE 060806 1 1 1 1 1 1

13 CIRCUIT BREAKER 16 AMP 1 POLE (208-240V) 057338

CIRCUIT BREAKER 25 AMP 1 POLE (208-240V) 033525 3 CIRCUIT BREAKER 32 AMP 1 POLE (208-240V) 033885 CIRCUIT BREAKER 40 AMP 1 POLE (208-240V) 033881 6 8 8 10 CIRCUIT BREAKER 13 AMP 1 POLE (480V) 057337 3

CIRCUIT BREAKER 20 AMP 1 POLE (480V) 033920 6 8 8 10 12 14 RELAY 030844 1 1 2 2 1 1 15* MAGNETIC REED SWITCH 053777 1 1 1 1 1 2 16* CIRCUIT BREAKER BASKET LIFT 4AMP 1 POLE 058219 1 1 1 1

*Not Shown-Rear Drain Only

(Quantity Per Model)

CONTACTOR TRAY (Top View) - Front Drain Unit

7

8

1

2

3

4

5

6

13

12

14

9

10

11

CONTROL PANEL FRONT

CONTACTOR TRAY (Front View) - Front Drain Unit

16

Figure 6-4 TS Control Panel 208/240V & 480V with Toggle Switches (Not shown to scale)

ITEM DESCRIPTION PART # 10×11 14 18 20 24

1 SWITCH TOGGLE SEALED ON-OFF 059141 1 1 1 1 1 2 INDICATING LIGHT CLEAR ROUND 28V 057863 1 1 1 1 1 3 SWITCH TOGGLE SEALED MELT-FRY 059143 1 1 1 1 1 4 INDICATING LIGHT GREEN ROUND 056587 1 1 1 1 1 5 INDICATING LIGHT RED ROUND 057861 1 1 1 1 1 6 TIMER DIGITAL 24V/120V 056921 2 2 2 2 2 7 THERMOSTAT KNOB, BLACK 060612 1 1 1 1 1 8 THERMOSTAT DIAL PLATE FRYER 250º-375º 058037 1 1 1 1 1 9 THERMOSTAT 031099 1 1 1 1 1 10 FAT MELT INFINITE CONTROL 037470 1 1 1 1 1 11 CONTACTOR 3 POLE 30 AMP 033896 2

(208/480v)

2

(480v)

4

(480v)

CONTACTOR 3 POLE 50 AMP 033899 2 4 CONTACTOR 4 POLE 30 AMP 053385 2(480v) 2(480v) CONTACTOR 4 POLE 40 AMP 053383 2 2

12 TRANSFORMER STEP DOWN 24VAC 75VA 056037 1 1 1 1 1

13

HIGH LIMIT RESETTABLE 060806 1 1 1 1 1

14 CIRCUIT BREAKER 16 AMP 1 POLE (208-240V) 057338

CIRCUIT BREAKER 25 AMP 1 POLE (208-240V) 033525 3 CIRCUIT BREAKER 32 AMP 1 POLE (208-240V) 033885 CIRCUIT BREAKER 40 AMP 1 POLE (208-240V) 033881 6 8 8 10 CIRCUIT BREAKER 13 AMP 1 POLE (480V) 057337 3

CIRCUIT BREAKER 20 AMP 1 POLE (480V) 033920 6 8 8 10 15 RELAY 030844 1 1 2 2 1 16* MAGNETIC REED SWITCH 053777 1 1 1 1 1 17* CIRCUIT BREAKER BASKET LIFT 4AMP 1 POLE 058219 1 1 1 1

(Quantity Per Model)

14

1211

10

13

15

CONTROL PANEL FRONT

CONTACTOR TRAY (Top View) - Front Drain Unit CONTACTOR TRAY (Front View) - Front Drain Unit

*Not Shown-Rear Drain Only



POWERPOWER

OFF ON ON



READYFRYMELT

OVER MAX

TO COOK

TEMP.





17

Figure 6-5 34X24 TS Control Panel 208/240V & 480V with Toggle Switches (Not shown to scale)

ITEM DESCRIPTION PART # 34×24

1 SWITCH TOGGLE SEALED ON-OFF 059141 1 2 INDICATING LIGHT CLEAR ROUND 28V 057863 1 3 SWITCH TOGGLE SEALED MELT-FRY 059143 1 4 INDICATING LIGHT GREEN ROUND 056587 1 5 INDICATING LIGHT RED ROUND 057861 1 6 TIMER DIGITAL 24V/120V 056921 2 7 THERMOSTAT KNOB, BLACK 060612 1 8 THERMOSTAT DIAL PLATE FRYER 250º-375º 058037 1 9 THERMOSTAT 031099 1 10 FAT MELT INFINITE CONTROL 037470 1 11 CONTACTOR 3 POLE 30 AMP 033896 4(480v)

CONTACTOR 3 POLE 50 AMP 033899 4 CONTACTOR 4 POLE 30 AMP 053385

CONTACTOR 4 POLE 40 AMP 053383 12 TRANSFORMER STEP DOWN 24VAC 75VA 056037 1 13 HIGH LIMIT RESETTABLE 060806 1 14 CIRCUIT BREAKER 16 AMP 1 POLE (208-240V) 057338

CIRCUIT BREAKER 25 AMP 1 POLE (208-240V) 033525

CIRCUIT BREAKER 32 AMP 1 POLE (208-240V) 033885

CIRCUIT BREAKER 40 AMP 1 POLE (208-240V) 033881

CIRCUIT BREAKER 13 AMP 1 POLE (480V) 057337

CIRCUIT BREAKER 20 AMP 1 POLE (480V) 033920 12 15 RELAY 030844 1 16* MAGNETIC REED SWITCH 053777 2 17* CIRCUIT BREAKER BASKET LIFT 4AMP 1 POLE 058219

*Not Shown-Rear Drain Only

Detail Area

CONTACTOR TRAY (Top View) - Front Drain Unit

CONTACTOR TRAY (Front View) - Front Drain Unit

5

2

4

6

7

31

89

10

11

15

12

13

14

CONTROL PANEL FRONT

18

Figure 6-6 34X24 CPU Control Panel 208/240V with Toggle Switch (Not shown to scale)

ITEM DESCRIPTION PART # 34×24

1 SWITCH TOGGLE SEALED ON-OFF 059141 1 2 COMPUTER 031125 1 3 INDICATING LIGHT RED ROUND 057861 1 4 TRANSFORMER STEP DOWN 24VAC 75VA 056037 1 5 CIRCUIT BREAKER 40 AMP 1 POLE (208-240V) 033881 12 6 HIGH LIMIT RESETTABLE 060806 1 7 RELAY DPDT 24 VAC 030844 1 8 RELAY DPDT 24 VDC 017673 1 9 MAGNETIC REED SWITCH (REAR DRAIN FRYERS ONLY) 053777 2 10 COMPUTER PROBE 004776 1 11 CONTACTOR 50 AMP 3 POLE 033899 4

1

2

3

4

6

7

8

9

10

5

CONTACTOR TRAY (Top View) -

Rear Drain Unit

CONTACTOR TRAY (Front View) - Rear Drain Unit

11

CONTROL PANEL FRONT

6

9

19

Figure 6-7 CPU Control Panel 208/240V with Rocker Switches (Not shown to scale)

1

2

3

4, 5, 6, 7 8

ITEM DESCRIPTION PART # QTY

1 COMPUTER 031125 1 2 SWITCH ROCKER ILLUMINATED GREEN 032242 1 3 SWITCH ROCKER MOMENTARY 015384 1 4 SCREW CARRIAGE 10 - 24 x 1/2” 027490 4 5 WASHER INTERNAL TOOTH LOCK #10 011562 4 6 WASHER .190 I.D. X .563 O.D. 013217 4 7 NUT HEX #10 - 24 009053 4 8 SCREW PAN HEAD PHILLIPS 10 - 24 x 1/2” 030850 2 9 TRANSFORMER STEP DOWN 24VAC 80VA 024032 1 10 CIRCUIT BREAKER 3 AMP 1 POLE (250V) 053338 1 11 HIGH LIMIT MANUAL RESET 060806 1 12 RELAY DPDT 24VAC 030844 2 13 RELAY DPDT 24VDC 017673 2 14 COMPUTER PROBE 004776 1 15 TRANSFORMER STEP DOWN 24VAC 75VA 056037 1 16 CIRCUIT BREAKER 40 AMP 1 POLE (208-240V) 033881 6 17 CONTACTOR 50 AMP 1 POLE 033899 2 18** SPARK IGNITION MODULE 24VAC 058439 1 19** BRACKET SPARK IGNITION MODULE 056000 1 20 MAGNETIC REED SWITCH (REAR DRAIN FRYERS ONLY) 053777 1

**Spark Ignition Model Only

9

10

11

13

SPARK IGNITION

CONTACTOR TRAY (Front View) -

Rear Drain Unit

14

SPARK IGNITION

CONTACTOR TRAY (Top View)

19

12

18

15

16

17

11

12

13

14

20

CONTACTOR TRAY (Front View) - Rear Drain Unit

CONTACTOR TRAY (Top View)

20

DESCRIPTION QTY PART #

1 TRANSFORMER 120/208/240/480V 1 056036 2* CIRCUIT BREAKER 3A/250V 1 053338 3 RELAY DPDT 24V AC 2 030844 4 RECTIFIER 1 018321 5 POWER CORD 1 021289 6 CONNECTION 3 CIRCUITS PLUG 1 032210

CONNECTOR CONTACT PIN MALE 3 028309

7 CONNECTOR 2 CIRCUIT CAP 2 032207

CONNECTOR CONTACT PIN FEMALE 2 028308 8 COVER FOR CIRCUIT BREAKER 1 054664 9 PUSH ROD 1 018096 10 SCREW

1

/4"-20" X 11/4" 1 021091

HEX NUT1/4-20 1 016383 11 COUPLER ACTUATOR BL 1 054525

RETAINING RING 2 054540

PIN COUPLER ACTUATOR BL 2 054503 12 ACTUATOR 24V DC 1 054510 13 SHAFT ACTUATOR LOWER BL S/S 1 054522 14 CONNECTOR 2 CIRCUIT PLUG 1 032208

CONNECTOR CONTACT PIN MALE 2 028309 15 PIN BASKET LIFT NON ROTATIONAL 1 054760

*This circuit breaker can be found under the control panel on newer units.

6

5

1

2

4

3

8

7

10

9

15

11

14

12

13

NOTES

1. A minimum distance of 3/

16" and maximum distance of

1

/

4" should be maintained when actuator

is at full downward stroke. Item 11 should never be bottomed on item 12 when in this location.

2. Actuator shaft should travel 6

1

/2" upward from lowest position.

3. Distance are to be measured when actuator is powered.

4. Apply light coating of food grade grease to Item 9 on entire shaft inside housing.

Housing

Figure 6-8 Basket Lift Power Supply Box Figure 6-9 Basket Lift Assembly

21

DESCRIPTION QTY PART #

1 TRANSFORMER STEPDOWN 24VAC 100VA 1 058359 2 RELAY DPDT 24VAC 2 030844

RELAY DPDT 24VDC (CPU MODEL) 2 017673 3 RECTIFIER 24VDC 1 018321 4 BUSHING STRAIN RELIEF

5

/8” HOLE 2 000470

5 BUSHING STRAIN RELIEF 3/4” HOLE 1 033800

*Circuit breaker is located under the control panel.

Basket Lift Power Supply Box 2007 (CPU & Non-CPU)

4700Y08K18K999

PRI:

COM 120 208 240 480

BLK WHT RED ORG BLK/RED

SEC:

24 VAC

BLU YEL

100 VA 50/60HZ

PRODUCTS UNLIMITED

ASM. IN MEXICO

tyco

Electronis

RU

C

US

1

2

3

4

5

4

TOP VIEW

SIDE VIEW

TO LEFT BASKET

TO CONTROL PANEL BACK/TRAY

TO RIGHT BASKET

22

WIRING DIAGRAMS

NOTE: A separate wiring diagram has been included with this manual and should be saved for troubleshooting and

maintaining the fryer. The wiring diagrams in this section cover standard fryers which may or may not match the diagram sent with the fryer. CPU models on pages 34 & 35.

SINGLE BASKET LIFT POWER SUPPLY BOX

DESCRIPTION QTY PART #

1 AR WIRENUT GRAY 2 027134 2 AP CONNECTOR 6 CIRCUIT PLUG 1 028302 3 CONNECTOR CONTACT PIN MALE 5 028309

23

10×11 BB 2006 208-240V & 480V 3 PHASE FRONT DRAIN

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

10×11, 14, 18 & 20 BB 2000 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY® FILTER

BASKET LIFT

66 BR 67 BL

70

5

7

R

8

6

68

BL

LEFT BASKET

24VAC HOT

RIGHT BASKET

C

2211BL

WH

31

NO NC

42

REAR DRAIN

C

MAGNETIC

BL

RDS

REED SWITCH

NC

12

69

CNC

HL

BR

1 2 3

64BR63YL42

4443 4645

BR

213

5476

RD

BR50BU

52

51TH53OR54YL55RD56

59

BL

MIFMP

58

TS

NEUT

LOAD HOT

12

3

4847 49

65

YLORRDBU

BL WHRD

OR

11

9810

12

119108765432112

WH

BL

57

60

RD

HLT

H

WH

61

BL

WH41

OR62

CONTROL PANEL TRAY

CONTROL PANEL INSERT

HEATING ELEMENTS

36

BL

L1

CR

T1

BL

25

1

2CB4

1

BL BL

TO BASKET LIFT

A1

BL

L2

T2

BL

3

4

12915

WH

L1

L3

A2 A2

CR

A2

T1

T3

40 WH

WH

118

5143

CB

26

10

7

WH

POWER SUPPLY BOX

#4 - BLACK COM #1 - WHITE 120V

NOTCH

WH

39

BR

GND

TRANSFORMER CONNECTIONS

TR

24VAC

BU

FRONT COVER

18

RD

L2

L3

A1

A2

T2

T3

RD

14

17

5

6

16

13

RD

TB

#5 - RED 208V #6 - GRAY 480V

#2 - ORANGE 240V

WH OR

RDBL GY

33112

44665

2

5

TRANSFORMER CONNECTIONS

WH37RD

WIRE COLOR CODES: RD - RED

RP

BL - BLACK BR - BROWN BU - BLUE GR - GREEN OR - ORANGE WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC GND - GROUNDING LUG H - "HEAT" ON LIGHT

120

HL - HIGH LIMIT SWITCH

VAC

HLT - "HIGH LIMIT TEST" SWITCH MIF - "MELT-IDLE-FRY" SWITCH MP - "MAIN POWER" SWITCH R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RP - RECEPTACLE WITH POWER CORD (APPLIES ONLY TO UNITS WITH FILTER) TB - TERMINAL BLOCK TH - THERMOSTAT TR - TRANSFORMER TS - FAT MELT TIMER RELAY SWITCH

SEE

38

HEATING ELEMENTS

#4 - BLACK COM #5 - RED 208V #6 - GRAY 480V

#2 - ORANGE 240V #1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES: RD - RED

BL - BLACK BR - BROWN BU - BLUE GR - GREEN OR - ORANGE WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF- "MELT FRY" SWITCH P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. WIRES #1 TO #6 ARE 10 AWG,

WIRES #7 TO #15 ARE 12 AWG.

2. ALL OTHER WIRES ARE 18 AWG.

10 11 12

20

26 RD

24 OR

BL BL

WH

FM

HOT21LOAD3NEUT

1C2

4

NCNO

HL

BL BL

25

27 28

TRAY

2221 23

BL

WHOR RD

BUBR

312 456789

BL OR BURD WH

3456

2BR1

F

976548321

M

BL1BL

CONTROL

PANEL

CONTROL

PANEL

INSERT

TH

8YL

PPOMF

7BR

WH

L1T3L2 L3NCNC

789

A2

T2A1T1

WH

1

21212

CB

23

WH

POWER CONNECTION BOX

13

WH

19

L1T3L2 L3

456

WH

DB

14 15

RD

CR2CR1

T2A1T1

RD

GRD

RD

FM

SEE

TRANSFORMER

6

GY

CONNECTION

CHART

565

RD

44

BL

NC

A2

NC

WH 18

OR

WH

75VA

TR

24VAC

BR

BU

22

11

1716

33

BL WH

RD

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

24

10×11 BB 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

10×11 BB 2006 208-240V & 480V 1 PHASE FRONT DRAIN

HEATING ELEMENTS

#4 - BLACK COM #5 - RED 208V #6 - GRAY 480V

#2 - ORANGE 240V #1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES: RD - RED

BL - BLACK BR - BROWN BU - BLUE GR - GREEN OR - ORANGE WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF- "MELT FRY" SWITCH P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. WIRES #1 TO #6 ARE 10 AWG,

WIRES #7 TO #15 ARE 12 AWG.

2. ALL OTHER WIRES ARE 18 AWG.

4

NCNO

CONTROL

PANEL

TRAY

CONTROL

PANEL

INSERT

1C2

HL

2221 23

BL

BL OR BURD WH

2BR1

PPOMF

7BR

FM

HOT21LOAD3NEUT

20

26 RD

24 OR

25

27 28

WHOR RD

BUBR

312 456789

3456

TH

8YL

WH

F

976548321

M

10 11 12

BL BL

BL

L1T3L2 L3NCNC

789

BL BL

21212

BL1BL

A2

T2A1T1

BL

1

CB

23

BL

POWER CONNECTION BOX

13

RD

WH

19

L1T3L2 L3

456

RD

DB

14 15

RD

CR2CR1

T2A1T1

RD

GRD

RD

FM

SEE

TRANSFORMER

6

GY

CONNECTION

CHART

565

RD

44

BL

NC

A2

NC

WH 18

RD

OR

WH

75VA

TR

24VAC

BR

BU

22

11

1716

33

BL RD

HEATING ELEMENTS

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

RDS

BLBLRDBR31

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: BL - BLACK

BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF- "MELT FRY" SWITCH P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. WIRES #1 TO #6 ARE 10 AWG,

11

22

WIRES #7 TO #15 ARE 12 AWG.

2. ALL OTHER WIRES ARE 18 AWG.

FM

HOT21LOAD3NEUT

29 WH

3

5

1

1C2

FM

R

87

30

32 RD

4

C

NO6NC

NCNO

4

2

HL

33 BR

25

27 28

TRAY

2221 23

BL

BL OR BURD WH

WHOR RD

BUBR

312 456789

3456

2BR1

CONTROL

PAN EL

CONTROL

PAN EL INSERT

TH

8YL

PPOMF

7BR

20

26 RD

24 OR

WH

F

976548321

M

10 11 12

BL BL

WH

L1T3L2 L3NCNC

789

BL BL

21212

BL1BL

A2

T2A1T1

WH

1

CB

23

WH

POWER CONNECTION BOX

WH

14 15

13

WH

RD

19

L1T3L2 L3

T2A1T1

456

RD

WH

DB

RD

FM

SEE

TRANSFORMER

6

GY

CONNECTION

CHART

565

RD

44

BL

NC

A2

CR2CR1

A2

NC

WH 18

RD

OR

WH

75VA

TR

24VAC

BR

BU

22

11

1716

33

BL WH

GRD

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

25

14, 18, 20 BB 2006 208-240V & 480V 1 PHASE FRONT DRAIN

14, 18, 20 BB 2006 208-240V & 480V 3 PHASE FRONT DRAIN

HEATING ELEMENTS

13 14 15

BL BL

BL

L1T3L2 L3NCNC

T2A1T1

789

BL BL RD

21212

23

BL1BL

WH

A2

BL

1

CB

BL

POWER CONNECTION BOX

WIRE COLOR CODES:

BL - BLACK

BR - BROWN

BU - BLUE

GR - GREEN

OR - ORANGE

RD - RED

WH - WHITE

YL - YELLOW

COMPONENT CODES:

CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC

DB - POWER DISTRUBITION BLOCK

FM - FAT MELT TIMER SWITCH

GRD - GROUNDING LUG

HL - HIGH LIMIT SWITCH

MF- "MELT FRY" SWITCH

P - "POWER" SWITCH

PO - "POWER ON" LIGHT (CLEAR)

TH - THERMOSTAT

TR - TRANSFORMER

NOTES: 1. WIRES #1 TO #18 ARE 10 AWG.

2. ALL OTHER WIRES ARE 18 AWG.

4

CONTROL

PAN EL

TRAY

CONTROL

PAN EL

INSERT

1C2

NCNO

HL

2524 26

BL

BL OR BURD WH

PPOMF

7BR

FM

HOT21LOAD3NEUT

28

30 31

WHOR RD

BUBR

312 456789

3456

2BR1

TH

8YL

23

29 RD

27 OR

WH

F

M

976548321

17 18

16

RD

10 112212

RD

L1T3L2 L3

CR2CR1

T2A1T1

RD

1121

22

456

RD

DB

GRD

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER CONNECTION

CHART

FM

SEE

TRANSFORMER

GY

6

CONNECTION

CHART

RD

565

BL

44

2019

33

BL RD

OR

NC

A2

NC

WH 21

22

WH

11

75VA

TR

24VAC

BR

BU

CB

26

14, 18, 20 BB 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY®FILTER

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

T T

24 BB 2006 208-240V & 480V 3 PHASE FRONT DRAIN

HEATING ELEMENTS

REAR DRAIN

RDS

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: RD - RED

BL - BLACK BR - BROWN BU - BLUE GR - GREEN OR - ORANGE WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF- "MELT FRY" SWITCH P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

2. WIRES #1 TO #6 ARE 10 AWG, WIRES #7 TO #18

3. ALL OTHER WIRES ARE 18 AWG.

FM

11

BL

22

RDBR34

33

ONLY TO UNITS WITH FILTER.

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

C78NO65NC

R

35 RD

13 14 15

WH RD

FM

HOT21LOAD3NEUT

32 WH

4

1

43

C2NCNO

21

HL

36 BR

28

30 31

CONTROL

PAN EL

CONTROL

PAN EL

INSERT

2524 26

BL

WHOR RD

TRAY

BUBR

312 456789

BL OR BURD WH

3456

2BR1

BL BL

23

WH

29 RD

27 OR

L1T3L2 L3NCNC

T2A1T1

789

WH RD

BL BL WH RD

976548321

F

M

BL1BL2WH

1

21212

3

TH

8YL

PPOMF

7BR

POWER CONNECTION BOX

16

WH

L1T3L2 L3

A2

10 112212

CB

1121

22

456

WH RD

DB

17 18

CR2CR1

T2A1T1

GRD

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

24VAC

BR

BU

FILTER

RECEPTACLE

FRONT COVER

NOTCH

TRANSFORMER CONNECTION

CHART

GY

RD

565

BL

44

OR

22

WH

11

75VA

TR

WH

BL

GR

GRWH BL

115/120 VAC

60 HZ.

FM

6

33

SEE

TRANSFORMER

CONNECTION

CHART

2019

BL RD

RD

NC

A2

NC

WH 21

CB

RD

HEATING ELEMENTS

17 18 19

BL BL

BL WH

29

WH

35 RD

33 OR

L1T3L2 L3

CR1

T2A1T1

910 11

BL WH

BL BL WH RD

976548321

F

M

21212

BL1BL2BL

1

3

#4 - BLACK COM #5 - RED 208V #6 - GRAY 480V

#2 - ORANGE 240V #1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES:

RD - RED

BL - BLACK

BR - BROWN

BU - BLUE

GR - GREEN

OR - ORANGE

WH - WHITE

YL - YELLOW

COMPONENT CODES:

CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC

DB - POWER DISTRUBITION BLOCK

FM - FAT MELT TIMER SWITCH

GRD - GROUNDING LUG

HL - HIGH LIMIT SWITCH

MF- "MELT FRY" SWITCH

P - "POWER" SWITCH

PO - "POWER ON" LIGHT (CLEAR)

H - THERMOSTAT R - TRANSFORMER

NOTES: 1. WIRES #1 TO #8 ARE 10 AWG, WIRES #9 TO #24

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

2. ALL OTHER WIRES ARE 18 AWG.

FM

HOT21LOAD3NEUT

1C2

4

NCNO

HL

34

36 37

CONTROL

PANEL

CONTROL

PANEL

INSERT

3130 32

BL

WHOR RD

TRAY

BUBR

312 456789

BL OR BURD WH

3456

2BR1

TH

8YL

PPOMF

7BR

20

WH RD

L4

A2

T4

12

1

2

4

WH

21

WH

L1T3L2 L3T4L4

13 142815

1121

CB

22

567

WH WH

22 23

CR2

T2A1T1

DB

POWER CONNECTION BOX

SEE

FM

TRANSFORMER

6

GY

CONNECTION

CHART

565

24

RD

A2

27 WH

16

RDWH

1

CB

2

8

RD

44

BL

25

26

33

BL

RD

22

OR

11

WH

75VA

TR

24VAC

BR

BU

GRD

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

T T

34×24 BB 2006 208-240V & 480V 3 PHASE FRONT DRAIN

27

24 BB 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY®FILTER

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

HEATING ELEMENTS

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

RDS

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: BL - BLACK

BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF- "MELT FRY" SWITCH P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

2. WIRES #1 TO #8 ARE 10 AWG, WIRES #9 TO #24

3. ALL OTHER WIRES ARE 18 AWG.

FM

11

BL

RDBR40

22

BL

39

ONLY TO UNITS WITH FILTER.

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

C78NO65NC

R

41 RD

38 WH

1C2

4

NCNO

43

21

HL

42 BR

CONTROL

PAN EL

TRAY

CONTROL

PAN EL

INSERT

FM

HOT21LOAD3NEUT

34

36 37

3130 32

BL

WHOR RD

BUBR

312 456789

BL OR BURD WH

3456

2BR1

TH

8YL

PPOMF

7BR

17 18 19

BL WH

BL BL

29

WH

35 RD

33 OR

L1T3L2 L3

91011

BL BL WH RD

F

976548321

M

21212

BL1BL2BL

A2

CR1

A2

T2A1T1

BL WH

1

3

20

21

WH RD

WH

L4

L1T3L2 L3T4L4

T4

12

13 142815

1

CB

2

4

WH

WH WH

POWER CONNECTION BOX

22 23

RD

A2

CR2

A2

T2A1T1

1121

22

567

RD

DB

GRD

SEE

FM

TRANSFORMER

GY

6

CONNECTION

CHART

RD

565

44

24VAC

BR

BL

OR

WH

75VA

TR

BU

FILTER

RECEPTACLE

FRONT COVER

22

11

GRWH BL

33

WH

BL

GR

115/120 VAC

60 HZ.

25

26

BL

RD

24

27 WH

16

RDWH

1

CB

2

8

RD

HEATING ELEMENTS

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR)

H - THERMOSTAT R - TRANSFORMER

NOTES: 1. WIRES #1 TO #10 ARE 10 AWG, WIRES #11 TO #30

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

2. ALL OTHER WIRES ARE 18 AWG.

1

4

C2NCNO

HL

CONTROL

PANE L

TRAY

CONTROL

PANE L

INSERT

FM

HOT21LOAD3NEUT

43

46 47

3938 40

BL

WHOR RD

BUBR

312 456789

BL OR BURD WH

3456

2BR1

TH

8YL

PPOMF

7BR

21 22 23 24 30

BL WH

BL BL

37

WH

44 RD

41 OR

11

BL BL

F

976548321

M

BL1BL2BL

42 OR

36

L2 L3 NC

A2

CR

1

A2

T2A1T1L1T3

NC NC

13

12

21212122

14 15

BL

WH

11

CB

3

45 7

WH

25 26 27

WH

L2 L3

NC NC

A2

CR

2

A2

T2A1T1L1T3

35 WH

WH

CB CB

WH

28

WH RD RD RD

WH

L2 L3

A2

CR

3

A2

T2A1T1L1T3

17

16

18

RD

WH

1

2

8

6

RD

WHWHWH

DB

GRD

45 RD

34 WH

NC NC

CB

POWER CONNECTION BOX

SEE

TRANSFORMER

CONNECTION

29

F

M

L2 L3

NC

A2

CR

4

A2

T2A1T1L1T3

33 WH

19

20

RD

1

2

9

10

RD

32

CHART

123456

RD

31 BL

OR

BL

RD GYWH

75VA

TR

24VAC

BR

BU

654321

28

34×24 BB 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY®FILTER

A1 B4

A3

A2 B5

B6

A1

A3

A2

B4B5B6

T T

10×11 TS 2006 208-240V & 480V 3 PHASE FRONT DRAIN

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

LEFT

RDS

MAGNETIC

REED SWITCH

N.C.

REAR DRAIN

RIGHT

RDS

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH

H - THERMOSTAT R - TRANSFORMER

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

2. WIRES #1 TO #10 ARE 10 AWG, WIRES #11 TO #30

3. ALL OTHER WIRES ARE 18 AWG.

FM

11

BL

ONLY TO UNITS WITH FILTER.

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

22

11

22

RDBR52

BR50RD

51

FM

49

C

R

87

53 RD

FM

HOT21LOAD3NEUT

46 47

BUBR

37

44 RD

41 OR

WHOR RD

976548321

48 WH

3

5

1

4

NO6NC

C2NCNO

4

2

HL

54 BR

43

PANE L

TRAY

PANE L

INSERT

3938 40

BL

312 456789

BL OR BURD WH

3456

2BR1

CONTROL

TH

8YL

PPOMF

7BR

HEATING ELEMENTS

21 22 23 24 30

BL WH

BL BL

WH

L2 L3 NC

CR

1

T2A1T1L1T3

13

12

11

BL BL

21212

BL1BL2BL

BL

3

F

M

25 26 27

WH

42 OR

36

L2 L3

A2

T2A1T1L1T3

NC NC

14 15

WH

1

11

CB

22

45 7

WH

WH RD RD RD

WH

NC NC

L2 L3

A2

CR

2

A2

T2A1T1L1T3

35 WH

17

16

WH

1

CB CB

2

6

WHWHWH

DB

POWER CONNECTION BOX

28

45 RD

A2

CR

3

A2

18

RD

1

CB

2

8

RD

GRD

29

34 WH

L2 L3

A2

CR

4

A2

T2A1T1L1T3

NC NC

33 WH

19

20

RD

1

2

9

10

RD

FRONT COVER

SEE

TRANSFORMER

CONNECTION

CHART

F

M

123456

OR

75VA

NC

24VAC

BR

GRWH BL

FILTER

RECEPTACLE

115/120 VAC

32

RD

31 BL

654321

BL

RD GYWH

TR

BU

WH

BL

GR

60 HZ.

14 TS 2006 208-240V & 480V 3 PHASE FRONT DRAIN

29

10×11 TS 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN

T T

HEATING ELEMENTS

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

RDS

MAGNETIC

REED SWITCH

N.C.

FM

11

BLBLRDBR36

22

34 WH

R-1

87

25 OR

3

5

1

4

C

NO6NC

R-2

87

35

4

37 RD

1

C2NCNO

2

HL

38 BR

21WH

3

5

1

FM

NO6NC

HOT21LOAD3NEUT

4

2

20

29 RD

26 OR

WH

10 11 12

BL BL

L1T3L2 L3T4L4

T2A1T1

C

WH RD

19

WH

A2

CR1

A2

14 15

13

WH

L1T3L2 L3

CR2

T2A1T1

SEE

TRANSFORMER

CONNECTION

F

M

RD

L4

A2

T4

18 WH

17

CHART

123456

WH

16 BL

OR

BL RD GYWH

75VA

TR

24VAC

BR

BU

654321

BURD

BU YL WH

RD

8

3130

YLOR YL

32

OR

WHBR

F

11 1298765432110

M

ORYL

107911

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J2

J3

OUT

J1

J4

18 OR

13 WH

WH1415 WH

WIRE COLOR CODES: BL - BLACK

BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RTC - "READY TO COOK" LIGHT (GREEN)

H - THERMOSTAT R - TRANSFORMER

NOTES: 1. WIRES #1 TO #6 ARE 10 AWG.

WIRES #7 TO #15 ARE 12 AWG.

2. ALL OTHER WIRES ARE 18 AWG.

CONTROL PANEL TRAY

CONTROL PANEL INSERT

POWER INPUT

J2

J3

OUT

J1

J4

OR17

24 33

27 28

22 23

BL

123 84567 9101112

BLBR OR

RD

3456

2BR1

TH

19

YL

P MF RTC OMT

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. WIRES #1 TO #6 ARE 10 AWG, WIRES #7 TO #18

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

2. ALL OTHER WIRES ARE 18 AWG.

1

4

C2NCNO

HL

123 84567 9101112

RD

2BR1

POWER INPUT

J2

J3

OUT

J1

J4

OR17

19

P MF RTC OMT

28 OR

27 36

25 26

BL

BLBR OR

3456

TH

YL

R

87

30 31

5

C

NO6NC

BURD

BU YL WH

RD

8

3

1

4

2

3433

YLOR YL

24WH

FM

HOT21LOAD3NEUT

35

CONTROL

OR

WHBR

PANE L TRAY

F

11 1298765432110

M

CONTROL

ORYL

PANEL

107911

INSERT

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J3

J1

18 OR

13 WH

WH1415 WH

789

BL BL

WH

1

21212

BL1BL2WH

3

POWER CONNECTION BOX

HEATING ELEMENTS

13 14 15

WH RD

BL BL

23

WH

32 RD

29 OR

L1T3L2 L3T4L4

CR1

T2A1T1

789

WH RD

BL BL WH RD

1

21212

BL1BL2WH

3

J2

OUT

J4

POWER CONNECTION BOX

CB

22

A2

CB

456

WH RD

RD

DB

GRD

17 18

16

WH

RD

L1T3L2 L3

CR2

T2A1T1

10 11WH12

1121

22

456

WH RD

RD

DB

GRD

L4

A2

T4

CB

SEE

TRANSFORMER

CONNECTION

CHART

F

M

123456

OR

75VA

24VAC

BR

21 WH

20

RD

19 BL

654321

BL

RD GYWH

TR

BU

30

14 TS 2006 WITH BASKET-LIFT 208-240V & 480V 3 PHASE FRONT DRAIN

OR 44

WH 43

BU 45

BL 42

YL 46

BR 47

RD 48

GR 49

OR

WH

BU

BL

YL

BR

RD

GR

FM

33

22

11

44

55

66

77

88

99

14 TS 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY®FILTER

HEATING ELEMENTS

WIRE COLOR CODES: BL - BLACK BR - BROWN B/R - BLACK/RED BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

BASKET LIFT

POWER SUPPLY BOX

RIGHT

BASKET

LIFT

BL11

BRBU

C

NO

NC

2211MF

16 14

BU

15

BR

BU

BR

17

BRBU

18

20

BU

OR WHBU BLYL BRRD GR

-

S

10

+

S

BL

WH13

12

YL9

WH

C

NO

NC

19

BU

BR

21

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

480V

B/R

240V

OR

208V

RD

120V

WH

COM

BL

24V

YL

24V

BU

BASKET

24WH

3

5

1

FM

NO6NC

4

2

3433

35

YLOR YL

BURD

WHBR

OR

11 1298765432110

BU YL WH

ORYL

107911

8

WH1415 WH

18 OR

HOT21LOAD3NEUT

RIGHT TIMERLEFT TIMER

F

M

CONTROL PANEL INSERT

12 WH16 WH

J3

J1

POWER INPUT

C

R

87

28 OR

4

1

C2NCNO

HL

27 36

30 31

25 26

4748

BL

CB 4A

LEFT

LIFT

POWER INPUT

J2

J3

OUT

J1

J4

OR17

BRBU

2211MF

BRBU

BRRD

123 84567 9101112

BLBR OR

RD

2BR1

19

3456

TH

YL

RD

P MF RTC OMT

CONTROL PANEL TRAY

13 WH

23

WH

32 RD

29 OR

J2

OUT

J4

13 14

15

BL BL

WH RD

L2 L3T4L4

A2

CR

1

A2

T2A1T1L1T3

89

7

BL BL WH RD

1

CB

21212

23

BL1BL

WH

POWER CONNECTION BOX

17

18

16

RD

WH

22 WH

L2 L3T4L4

CR

2

T2A1T1L1T3

10 11 12

RDWH

22112

4

WH56RD

RD

DB

SEE

TRANSFORMER

CONNECTION

CHART

FM

WH

1

OR

2

3

BL

4

A2

21

WH

1

CB

4

RD

5

GY

6

75VA

TR

24VAC

BR

BU

2019

BL RD

GRD

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

ONLY TO UNITS WITH FILTER.

2. WIRES #1 TO #6 ARE 10 AWG, WIRES #7 TO #18 ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

3. ALL OTHER WIRES ARE 18 AWG.

4. THIS DIAGRAM SHOWS 240 VAC SUPPLY VOLTAGE FOR THE PRIMARY SIDE OF THE TRANSFORMER FOR THE BASKET LIFT POWER SUPPLY BOX.

HEATING ELEMENTS

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

RDS

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

ONLY TO UNITS WITH FILTER.

2. WIRES #1 TO #6 ARE 10 AWG, WIRES #7 TO #18 ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

3. ALL OTHER WIRES ARE 18 AWG.

FM

11

BLBLRDBR39

22

37 WH

R-1

87

28 OR

3

5

1

4

C

NO6NC

R-2

87

40 RD

POWER INPUT

J3

J1

4

J2

OUT

J4

OR17

38

1

C2NCNO

2

HL

41 BR

27 36

30 31

25 26

BL

123 84567 9101112

BLBR OR

RD

3456

2BR1

TH

19

YL

P MF RTC OMT

3

5

C

NO6NC

4

BURD

BU YL WH

RD

8

1

2

3433

YLOR YL

24WH

FM

HOT21LOAD3NEUT

23

32 RD

29 OR

35

CONTROL

WHBR

OR

PANEL TRAY

11 1298765432110

F

M

CONTROL

ORYL

PANEL

107911

INSERT

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J2

J3

OUT

J1

J4

18 OR

13 WH

WH1415 WH

13 14 15

WH RD

BL BL

WH

L1T3L2 L3T4L4

CR1

T2A1T1

789

WH RD

BL BL WH RD

1

21212

3

BL1BL2WH

POWER CONNECTION BOX

22

A2

CB

17 18

16

WH

RD

L1T3L2 L3

CR2

T2A1T1

10 11WH12

1121

22

456

WH RD

RD

DB

GRD

L4

A2

T4

CB

SEE

TRANSFORMER

CONNECTION

CHART

F

M

123456

OR

24VAC

BR

21 WH

GRWH BL

FILTER

RECEPTACLE

FRONT COVER

BL RD GYWH

75VA

TR

BU

WH

BL

GR

115/120 VAC

20

19 BL

RD

654321

60 HZ.

18, 20 TS 2006 208-240V & 480V 3 PHASE FRONT DRAIN

31

14 TS 2006 WITH BASKET-LIFT 208-240V & 480V 3 PHASE WITH REAR DRAIN AND

SAFE & EASY

®

FILTER

WIRE COLOR CODES: BL - BLACK

BR - BROWN B/R - BLACK/RED BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

POWER SUPPLY BOX

RIGHT

BASKET

LIFT

BRBU

2211MF

16 14

BR

BU

BRBU

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

2. WIRES #1 TO #6 ARE 10 AWG, WIRES #7 TO #18

3. ALL OTHER WIRES ARE 18 AWG.

4. THIS DIAGRAM SHOWS 240 VAC SUPPLY VOLTAGE

#4 - BLACK COM

#5 - RED 208V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

REED SWITCH

BASKET LIFT

OR WHBU BLYL BRRD GR

-

S

10

+

S

BL

WH13

BL11

C

NO

NC

BU

15

BR

17

ONLY TO UNITS WITH FILTER.

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

FOR THE PRIMARY SIDE OF THE TRANSFORMER FOR THE BASKET LIFT POWER SUPPLY BOX.

12

YL9

WH

C

NO

NC

18

20

19

BU

BR

BU

BR

21

#6 - GRAY 480V

RDS

MAGNETIC

N.C.

480V

B/R

240V

OR

208V

RD

120V

WH

COM

BL

24V

YL

24V

BU

FM

BLBLRDBR39

11

22

FM

11

BL 42

BL

22

WH 43

WH

33

OR 44

OR

44

BU 45

BU

55

YL 46

YL

66

BR 47

BR

77

RD 48

RD

88

GR 49

GR

99

LEFT

BASKET

LIFT

BRBU

2211MF

BRBU

HEATING ELEMENTS

37 WH

R-1

28 OR

3

5

1

4

C

NO6NC

R-2

87

38

40 RD

CB 4A

POWER INPUT

J2

J3

OUT

J1

J4

OR17

1

C2NCNO

4

2

HL

41 BR

25 26

4748

BL

BRRD

123 84567 9101112

BLBR OR

RD

3456

2BR1

TH

19

YL

27 36

30 31

PMFRTCOMT

87

5

C

NO6NC

BURD

BU YL WH

RD

8

3

1

4

2

3433

YLOR YL

24WH

FM

HOT21LOAD3NEUT

23

32 RD

29 OR

35

CONTROL

WHBR

OR

PANE L TRAY

11 1298765432110

F

M

CONTROL

ORYL

PANE L

107911

INSERT

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J2

J3

OUT

J1

J4

18 OR

13 WH

WH1415 WH

13 14

BL BL

WH

L2 L3T4L4

CR

1

T2A1T1L1T3

7

89

BL BL WH RD

21212

23

BL1BL

16

15

WH RD

1

WH

22 WH

A2

10 11 12

CB

WH56RD

17

RD

L2 L3T4L4

CR

T2A1T1L1T3

22112

4

DB

18

A2

2

A2

21

WH

RDWH

1

CB

RD

GRD

POWER CONNECTION BOX

75VA

TR

24VAC

BR

BU

FILTER

RECEPTACLE

FRONT COVER

115/120 VAC

SEE

TRANSFORMER

CONNECTION

CHART

1

WH

OR

2

3

4

BL

5

RD

6

GY

GRWH BL

60 HZ.

FM

1

2

3

4

5

6

2019

BL RD

WH

BL

GR

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES: BL - BLACK

BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. WIRES #1 TO #8 ARE 10 AWG, WIRES #9 TO #24

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

2. ALL OTHER WIRES ARE 18 AWG.

R-1

34 OR

1

4

C2NCNO

HL

33 42

31 32

BL

123 84567 9101112

BLBR OR

RD

3456

2BR1

POWER INPUT

J2

J3

OUT

J1

J4

OR17

TH

19

YL

PMFRTCOMT

87

36 37

3

5

C

NO6NC

4

BURD

BU YL WH

RD

8

30WH

1

FM

HOT21LOAD3NEUT

2

4039

41

YLOR YL

WHBR

OR

11 1298765432110

F

M

CONTROL

ORYL

PAN EL

107911

INSERT

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J3

J1

18 OR

WH1415 WH

CONTROL PANEL TRAY

13 WH

17 18 19

BL BL

29

WH

38 RD

35 OR

L1T3L2 L3T4L4

9

BL BL WH RD

21212

J2

BL1BL

OUT

J4

HEATING ELEMENTS

BL WH

CR1

T2A1T1

10 11WH12

BL WH

1

23

20

WH RD

22 23

21

WH

28

L1T3L2 L3

A2

CR2

T2A1T1

13 14 15 16

1

1121

CB

2

22

4

567

WH

DB

POWER CONNECTION BOX

SEE

TRANSFORMER

CONNECTION

24

F

M

RD

L4

A2

T4

27 WH

26

CHART

123456

RD

25 BL

OR

BL RD GYWH

75VA

TR

24VAC

BR

BU

654321

RDWH

1

CB

2

8

RDBL WH

RD

GRD

32

+

S

-

2211MF

18, 20 TS 2006 208-240V & 480V 3 PHASE WITH BASKET-LIFT FRONT DRAIN

18, 20 TS 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY® FILTER

T T

HEATING ELEMENTS

WIRE COLOR CODES: BL - BLACK BR - BROWN B/R - BLACK/RED BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

BASKET LIFT

POWER SUPPLY BOX

RIGHT

BASKET

LIFT

BL11

BRBU

C

NO

NC

2211MF

16 14

20

15

BU

BR

17

BR

BRBU

10

BL

18

BU

OR WHBU BLYL BRRD GR

WH13

12

YL9

WH

C

NO

NC

BU

19

21

BR

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

480V

B/R

240V

OR

208V

RD

120V

WH

COM

BL

24V

YL

24V

BU

30WH

3

5

1

FM

NO6NC

4

2

4039

41

YLOR YL

BURD

WHBR

OR

11 1298765432110

ORYL

BU YL WH

107911

8

WH1415 WH

HOT21LOAD3NEUT

18 OR

RIGHT TIMERLEFT TIMER

F

M

CONTROL PANEL INSERT

12 WH16 WH

J3

J1

POWER INPUT

C

R-1

87

34 OR

4

1

C2NCNO

HL

FM

11

BL 48

BL

22

WH 49

WH

33

OR 50

OR

44

BU 51

BU

55

YL 52

YL

66

BR 53

BR

77

RD 54

RD

88

GR 55

GR

LEFT

BASKET

99

LIFT

BRBU

CB 4A

POWER INPUT

J2

J3

OUT

J1

J4

OR17

PMFRTCOMT

33 42

36 37

31 32

5354

BL

BRRD

123 84567 9101112

BLBR OR

RD

2BR1

19

3456

TH

YL

RD

CONTROL PANEL TRAY

13 WH

29

WH

38 RD

35 OR

J2

OUT

J4

17 18 19

BL BL

L2 L3T4L4

T2A1T1L1T3

10 11 12

9

BL BL WH RD

21212

23

BL1BL

20

WH RD

BL WH

28 WH

A2

CR

1

A2

BL WH

1

2

4

WH

POWER CONNECTION BOX

21

WH

13 14 15 16

22112

567

WH

22 23

RD

L2 L3T4L4

CR

2

T2A1T1L1T3

1

RD

DB

SEE

TRANSFORMER

CONNECTION

24

CHART

FM

WH

1

OR

2

3

BL

4

A2

27

WH

RDWH

1

CB

2

8

RDBL WH

4

RD

5

GY

6

75VA

TR

24VAC

BR

BU

2625

BL RD

GRD

NOTES: 1. WIRES #1 TO #8 ARE 10 AWG, WIRES #9 TO #24

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

2. ALL OTHER WIRES ARE 18 AWG.

3. THIS DIAGRAM SHOWS 240 VAC SUPPLY VOLTAGE

FOR THE PRIMARY SIDE OF THE TRANSFORMER FOR THE BASKET LIFT POWER SUPPLY BOX.

HEATING ELEMENTS

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

RDS

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RTC - "READY TO COOK" LIGHT (GREEN)

H - THERMOSTAT R - TRANSFORMER

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

ONLY TO UNITS WITH FILTER.

2. WIRES #1 TO #8 ARE 10 AWG, WIRES #9 TO #24 ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

3. ALL OTHER WIRES ARE 18 AWG.

FM

11

BLBLRDBR45

22

R-2

87

44

46 RD

J3

J1

43 WH

34 OR

3

5

1

4

1

C2NCNO

2

HL

47 BR

31 32

123 84567 9101112

RD

3456

2BR1

19

YL

POWER INPUT

OR17

C

NO6NC

4

J2

OUT

J4

P MF RTC OMT

R-1

87

33 42

36 37

BL

BLBR OR

TH

5

C

NO6NC

BURD

BU YL WH

RD

8

3

1

4

2

4039

YLOR YL

30WH

FM

HOT21LOAD3NEUT

29

38 RD

35 OR

41

CONTROL

OR

WHBR

PANE L TRAY

11 1298765432110

F

M

CONTROL

ORYL

PANE L

107911

INSERT

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J2

J3

OUT

J1

J4

18 OR

13 WH

WH1415 WH

17 18 19

BL WH

BL BL

WH

L1T3L2 L3T4L4

CR1

T2A1T1

9

10 11WH12

BL WH

BL BL WH RD

1

21212

23

BL1BL

21

20

22 23

WH

WH RD

28

L1T3L2 L3

A2

1

2

4

WH

CR2

T2A1T1

13 14 15 16

1121

CB

22

567

WH

DB

POWER CONNECTION BOX

RD

GRD

24

L4

A2

T4

RDWH

1

2

8

RDBL WH

SEE

TRANSFORMER

CONNECTION

CHART

F

M

123456

OR

24VAC

BR

27 WH

CB

FILTER

RECEPTACLE

FRONT COVER

BL RD GYWH

75VA

TR

BU

GRWH BL

26

RD

25 BL

654321

WH

BL

GR

115/120 VAC

60 HZ.

T T

24 TS 2006 208-240V & 480V 3 PHASE FRONT DRAIN

33

+

S

-

18, 20 TS 2006 WITH BASKET-LIFT 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY® FILTER

WIRE COLOR CODES: BL - BLACK BR - BROWN B/R - BLACK/RED BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

BASKET LIFT

POWER SUPPLY BOX

RIGHT

BASKET

LIFT

10

BL

BL11

BRBU

C

NO

NC

2211MF

16 14

BR

BRBU

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

18

20

BU

15

BR

BU

BR

17

ONLY TO UNITS WITH FILTER.

2. WIRES #1 TO #8 ARE 10 AWG, WIRES #9 TO #24 ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

3. ALL OTHER WIRES ARE 18 AWG.

4. THIS DIAGRAM SHOWS 240 VAC SUPPLY VOLTAGE FOR THE PRIMARY SIDE OF THE TRANSFORMER FOR THE BASKET LIFT POWER SUPPLY BOX.

NOTCH

CONNECTION CHART

OR WHBU BLYL BRRD GR

WH13

12

YL9

WH

C

NO

NC

19

BU

BR

21

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

TRANSFORMER

REAR DRAIN

RDS

MAGNETIC

REED SWITCH

N.C.

B/R

OR

RD

WH

BL

YL

BU

480V

240V

208V

120V

COM

24V

FM

11

BLBLRDBR45

22

FM

11

BL 48

BL

22

WH 49

WH

33

OR 50

OR

44

BU 51

BU

55

YL 52

YL

66

BR 53

BR

77

RD 54

RD

88

GR 55

GR

99

LEFT

BASKET

LIFT

BRBU

2211MF

BRBU

3

5

1

C

NO6NC

R-2

87

4

46 RD

POWER INPUT

J3

J1

2

CB 4A

J2

OUT

J4

OR17

44

PMFRTCOMT

43 WH

34 OR

4

1

C2NCNO

HL

47 BR

31 32

5354

BL

BRRD

123 84567 9101112

BLBR OR

RD

3456

2BR1

19

YL

3

5

C

NO6NC

R-1

87

4

33 42

36 37

4039

BURD

BU YL WH

RD

8

TH

YLOR YL

30WH

1

FM

HOT21LOAD3NEUT

2

41

CONTROL

WHBR

OR

PANEL TRAY

11 1298765432110

F

M

CONTROL

ORYL

PANEL

107911

INSERT

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J3

J1

18 OR

13 WH

WH1415 WH

HEATING ELEMENTS

17 18 19

BL BL

29

WH

38 RD

35 OR

9

BL BL WH RD

21212

J2

BL1BL

OUT

J4

BL WH

L2 L3T4L4

A2

CR

1

A2

T2A1T1L1T3

10 11 12

BL WH

1

23

POWER CONNECTION BOX

21

20

22 23

WH

WH RD

WH

28 WH

L2 L3T4L4

T2A1T1L1T3

13 14 15 16

1

22112

2

4

567

WH

RD

A2

CR

2

A2

27

WH

1

RD

DB

GRD

SEE

TRANSFORMER

CONNECTION

24

CHART

FM

1

WH

OR

2

3

4

BL

5

RD

6

GY

75VA

TR

24VAC

BR

BU

2625

FILTER

RECEPTACLE

115/120 VAC

60 HZ.

BL RD

WH

BL

GR

GRWH BL

RDWH

1

CB

2

8

RDBL WH

FRONT COVER

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES: BL - BLACK

BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER

CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RTC - "READY TO COOK" LIGHT (GREEN)

H - THERMOSTAT R - TRANSFORMER

NOTES: 1. WIRES #1 TO #10 ARE 10 AWG, WIRES #11 TO #30

2. ALL OTHER WIRES ARE 18 AWG.

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

4

1

C2NCNO

HL

123 84567 9101112

RD

2BR1

POWER INPUT

J2

J3

OUT

J1

J4

OR17

19

P MF RTC OMT

42 OR

39 40

BL

BLBR OR

3456

TH

YL

R

87

41 52

45 46

5

C

NO6NC

BURD

BU YL WH

RD

8

3

1

4

2

5049

YLOR YL

38WH

FM

HOT21LOAD3NEUT

51

WHBR

OR

11 1298765432110

ORYL

107911

RIGHT TIMERLEFT TIMER

18 OR

WH1415 WH

F

M

CONTROL PANEL INSERT

12 WH16 WH

J3

J1

POWER INPUT

13 WH

CONTROL PANE L TRAY

J2

OUT

J4

37

47 RD

43 OR

21 22 23

BL BL

WH

11 12 13

BL BL WH

21212

BL1BL2BL

HEATING ELEMENTS

BL WH

L2 L3T4L4

A2

CR

1

A2

T2A1T1L1T3

BL

1

CB

3

24

25 26

WH

44 OR

36

L2 L3

CR

2

T2A1T1L1T3

14 15

WH

11

22

45 6

WH

POWER CONNECTION BOX

WH

A2

35 WH

L4

T4

27 28 29 30

WH

WH RD RD RD

L2 L3T4L4

A2

CR

3

A2

T2A1T1L1T3

16

17

18

RD

WH

1

2

7

8

RD

WHWHWH

DB

GRD

CB CBCB

48 RD

19

RD

1

2

9

RD

TRANSFORMER

CONNECTION

F

M

34 WH

L2 L3T4L4

CR

4

T2A1T1L1T3

20

RD

1

2

10

RD

SEE

CHART

123456

OR

BL

75VA

TR

24VAC

A2

BR

33 WH

BU

32

RD

31 BL

654321

RD GYWH

34

24 TS 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY® FILTER

A1 B4

A3

A2 B5

B6

A1 B4

A3

A2 B5

B6

34×24 TS 2006 208-240V & 480V 3 PHASE FRONT DRAIN

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

RDS

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

ONLY TO UNITS WITH FILTER.

2. WIRES #1 TO #10 ARE 10 AWG, WIRES #11 TO #30 ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

3. ALL OTHER WIRES ARE 18 AWG.

FM

BLBLRDBR55

11

22

5

C

R-2

87

54

56 RD

POWER INPUT

J3

J1

OR17

53 WH

R-1

42 OR

3

1

4

1

C2NCNO

2

HL

57 BR

41 52

45 46

39 40

BL

123 84567 9101112

BLBR OR

RD

3456

2BR1

TH

19

YL

J2

J4

OUT

NO6NC

4

P MF RTC OMT

87

3

5

C

NO6NC

4

BURD

BU YL WH

RD

8

1

2

5049

YLOR YL

OR

ORYL

107911

38WH

FM

HOT21LOAD3NEUT

37

47 RD

43 OR

51

CONTROL

WHBR

PANE L TRAY

11 1298765432110

F

M

CONTROL PANE L INSERT

12 WH16 WH

RIGHT TIMERLEFT TIMER

POWER INPUT

J2

J3

OUT

J1

J4

18 OR

13 WH

WH1415 WH

21 22 23

BL BL

WH

11 12 13

BL BL WH

21212

BL1BL2BL

HEATING ELEMENTS

BL WH

L2 L3T4L4

A2

CR

1

A2

T2A1T1L1T3

BL

1

CB

3

24

WH

44 OR

14 15

11

22

45 6

WH

25 26

36

WH

L2 L3

L4

A2

CR

2

A2

T2A1T1L1T3

T4

35 WH

WH

POWER CONNECTION BOX

27 28 29 30

WH RD RD RD

WH

L2 L3T4L4

CR

3

T2A1T1L1T3

17

18

16

RD

WH

1

2

7

8

RD

WHWHWH

DB

GRD

SEE

TRANSFORMER

CONNECTION

F

M

48 RD

34 WH

L2 L3T4L4

A2

CB CBCB

A2

CR

4

A2

T2A1T1L1T3

33 WH

19

20

RD

1

2

9

10

RD

RECEPTACLE

FRONT COVER

32

CHART

31 BL

123456

OR

BL

RD GYWH

75VA

TR

24VAC

BR

BU

WH

BL

GR

GRWH BL

FILTER

115/120 VAC

60 HZ.

RD

654321

HEATING ELEMENTS

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) R - RELAY 24VAC RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. WIRES #1 TO #12 ARE 10 AWG, WIRES #13 TO #36

ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

2. ALL OTHER WIRES ARE 18 AWG.

48 OR

1

4

C2NCNO

HL

47 58

45 46

CONTROL PANEL TRAY

CONTROL PANEL INSERT

WH13

LEFT TIMER RIGHT TIMER

POWER INPUT

J2

J3

OUT

J1

J4

OR15

PPOMFTHRTC OMT

14 BR

BL

312 456789

345BL7

2BR18

17

YL

12 WH 11 WH

5

C

NO6NC

R

87

51 52

BURD

BUOR OR

RDYL9YL WH

6

44WH

3

1

FM

HOT21LOAD3NEUT

4

2

5655

57

YLOR YL

WHBR

OR

F

976548321

M

10

WH

16

OR

25 26 27

BL WH

BL BL

43

WH

53 RD

49 OR

POWER INPUT

J2

J3

OUT

J1

J4

50 OR

L2 L3 NC

A2

CR

1

A2

T2A1T1L1T3

NC NC

13

14 15WH16

BL

BL BL

CB

21212122

3

BL1BL2BL

28

29 31

BL30WH RD

42

L2 L3

CR

2

T2A1T1L1T3

17

18

WH

BL

11

45 7

WH

BL

32 33 34 35

WH RD RD RD

WH

54 RD

40 WH

L2 L3

NC NC

A2

41 WH

1

CB CB

2

6

19

1

2

WHWHWH

CR

T2A1T1L1T3

20

WH

1

2

8

DB

A2

3

A2

21

RD

1

2

9

RD

GRD

NC NC

22 23 24

RD

1

CB

2

10

RD

POWER CONNECTION BOX

L2 L3

CR

4

T2A1T1L1T3

RD

1

2

11

RD

TRANSFORMER

CONNECTION

CHART

36

F

M

123456

NC

A2

39 WH

RD

1

2

12

RD

SEE

38

RD

37 BL

654321

OR

BL

RD GYWH

75VA

TR

24VAC

BR

BU

35

A1 B4

A3

A2 B5

B6

A1 B4

A3

A2 B5

B6

34×24 TS 2006 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY® FILTER

14 CPU 2007 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY

®

FILTER

#4 - BLACK COM

#5 - RED 208V

#6 - GRAY 480V

#2 - ORANGE 240V

#1 - WHITE 120V

NOTCH

TRANSFORMER

CONNECTION CHART

REAR DRAIN

LEFT

RDS

MAGNETIC

REED SWITCH

N.C.

REAR DRAIN

RIGHT

RDS

MAGNETIC

REED SWITCH

N.C.

WIRE COLOR CODES: BL - BLACK BR - BROWN BU - BLUE GR - GREEN GY - GRAY OR - ORANGE RD - RED WH - WHITE YL - YELLOW

COMPONENT CODES: CB - CIRCUIT BREAKER CR - CONTACTOR 24VAC DB - POWER DISTRUBITION BLOCK FM - FAT MELT TIMER SWITCH GRD - GROUNDING LUG HL - HIGH LIMIT SWITCH MF - "MELT FRY" SWITCH OMT - "OVER MAX TEMP." LIGHT (RED) P - "POWER" SWITCH PO - "POWER ON" LIGHT (CLEAR) R - RELAY 24VAC RDS - REAR DRAIN VALVE SWITCH RTC - "READY TO COOK" LIGHT (GREEN) TH - THERMOSTAT TR - TRANSFORMER

NOTES: 1. FILTER RECEPTACLE & POWER CORD APPLIES

FM

11

BL

22

BL

FM

11

BL

22

BL

ONLY TO UNITS WITH FILTER.

2. WIRES #1 TO #12 ARE 10 AWG, WIRES #13 TO #36 ARE 10 AWG FOR 208/240 VOLT UNITS AND ARE 12 AWG FOR 480 VOLT UNITS.

3. ALL OTHER WIRES ARE 18 AWG.

R-2

87

RDBR63

60

BR61RD

64 RD

62

CONTROL PANEL TRAY

CONTROL PANEL INSERT

WH13

LEFT TIMER RIGHT TIMER

POWER INPUT

J3

J1

OR15

59 WH

48 OR

3

5

1

4

C

NO6NC

J2

OUT

J4

C2NCNO

4

2

HL

65 BR

45 46

BL

2BR18

17

YL

PPOMFTHRTC OMT

14 BR

44WH

3

5

1

C

NO6NC

R-1

87

4

2

47 58

51 52

5655

57

YLOR YL

BURD

312 456789

345BL7

12 WH 11 WH

OR

RDYL9YL WH

BUOR OR

6

FM

HOT21LOAD3NEUT

43

53 RD

49 OR

WHBR

F

976548321

M

POWER INPUT

J2

J3

OUT

J1

J4

10

WH

16

OR

HEATING ELEMENTS

25 26 27

BL WH

BL BL

WH

L2 L3 NC

A2

CR

1

A2

T2A1T1L1T3

13

14 15WH16

BL

BL BL

CB

21212122

3

BL1BL2BL

28

29 31

BL30WH RD

50 OR

42

L2 L3

NC NC

A2

CR

2

A2

T2A1T1L1T3

NC NC

41 WH

17

18

WH

BL

WH

1

11

CB CB

2

6

45 7

WH

BL

WH

POWER CONNECTION BOX

32 33 34 35

WH RD RD RD

WH

L2 L3

A2

CR

3

A2

T2A1T1L1T3

21

19

20

RD

WH

1

2

8

9

RD

WHWHWH

DB

54 RD

40 WH

L2 L3

CR

4

T2A1T1L1T3

NC NC

22 23 24

RD

1

CB

2

10

11

RD

GRD

SEE

TRANSFORMER

CONNECTION

CHART

36

F

123456

M

NC

A2

39 WH

RD

1

2

12

RD

FILTER

RECEPTACLE

FRONT COVER

38

RD

37 BL

654321

OR

BL

RD GYWH

75VA

TR

24VAC

BR

BU

WH

BL

GR

GRWH BL

115/120 VAC

60 HZ.

36

34x24 CPU 2007 208-240V & 480V 3 PHASE WITH REAR DRAIN AND SAFE & EASY® FILTER

37

KEATING FRYER SPECIFICATIONS

10×11 BB MODELS 14 BB

AMPS

VOLTS kW

SINGLE

L1 L2 L3

PHASE

208 6.7 19 19 19 32

220 7.5 20 20 20 34

240 8.9 21 21 21 37

480 8.9 11 11 11 19

AMPS PER LINE-THREE PHASE

 3 ELEMENTS (2500 W EACH)

AMPS

VOLTS kW

SINGLE

L1 L2 L3

PHASE

208 11.7 33 33 33 56

220 13.1 34 34 34 59

240 15.5 37 37 37 65

480 15.5 19 19 19 32

AMPS PER LINE-THREE PHASE

 3 ELEMENTS (4350 W EACH)

AMPS

VOLTS kW SINGLE

L1 L2 L3 PHASE

208 21.5 68 68 45 103

220 24.0 72 72 47 109

240 28.6 79 79 52 119

480 28.6 39 39 26 60

AMPS PER LINE-THREE PHASE

 4 ELEMENTS (6000 W EACH)

24 BB

AMPS

VOLTS kW

SINGLE

L1 L2 L3

PHASE

208 16.1 45 45 45 77

220 18.0 47 47 47 82

240 21.4 52 52 52 89

480 21.4 26 26 26 45

AMPS PER LINE-THREE PHASE

 3 ELEMENTS (6000 W EACH)

18/20 BB

AMPS

VOLTS kW SINGLE

L1 L2 L3 PHASE

208 28.6 68 89 68 129

220 30.0 72 95 72 136

240 35.7 79 103 79 149

480 35.7 39 52 39 74

AMPS PER LINE-THREE PHASE

 5 ELEMENTS (6000 W EACH)

34×24 BB

* RATINGS ARE THE SAME FOR FLOOR MODELS AND COUNTER MODELS

38

TS MODELS

10×11 TS 14 TS

AMPS

VOLTS kW

SINGLE

L1 L2 L3

PHASE

208 10.2 28 28 28 49

220 11.4 30 30 30 52

240 13.6 33 33 33 57

480 13.6 16 16 16 28

AMPS PER LINE-THREE PHASE

 3 ELEMENTS (3800 W EACH)

AMPS

VOLTS kW SINGLE

L1 L2 L3 PHASE

208 17.4 48 48 48 84

220 19.5 51 51 51 89

240 23.2 56 56 56 97

480 23.2 28 28 28 48

AMPS PER LINE-THREE PHASE

 3 ELEMENTS (6500 W EACH)

AMPS

VOLTS kW SINGLE

L1 L2 L3

PHASE

208 26.8 68 89 68 129

220 30.0 72 95 72 136

240 35.7 79 103 79 149

480 35.7 39 52 39 74

AMPS PER LINE-THREE PHASE

 5 ELEMENTS (6000 W EACH)

24 TS

AMPS

VOLTS kW

SINGLE

L1 L2 L3

PHASE

208 21.5 68 68 45 103

220 24.0 72 72 47 109

240 28.6 79 79 52 119

480 28.6 39 39 26 60

AMPS PER LINE-THREE PHASE

 4 ELEMENTS (6000 W EACH)

18/20 TS

AMPS

VOLTS kW SINGLE

L1 L2 L3 PHASE

208 32.2 89 89 89 155

220 36.0 95 95 95 164

240 42.8 103 103 103 179

480 42.8 52 52 52 89

AMPS PER LINE-THREE PHASE

 6 ELEMENTS (6000 W EACH)

34×24 TS

* RATINGS ARE THE SAME FOR FLOOR MODELS AND COUNTER MODELS

SERVICE INFORMATION

If you have a service related question call 1-800-KEATING.

Please state the nature of the call; it will ensure speaking with the appropriate person.

Have your serial and model number available when ordering parts.

KEATING OF CHICAGO, INC.

8901 W. 50th Street, McCook, Illinois 60525-6001

Phone: (708) 246-3000 FAX: (708) 246-3100 Toll Free 1-800-KEATING (In U.S. and Canada)

www.keatingofchicago.com

*As continuous product improvement occurs, specifications may be changed without notice.

KEATING LIMITED WARRANTY CARD

PLEASE COMPLETE AND MAIL AT ONCE–WARRANTY IS NOT IN EFFECT UNTIL CARD IS RETURNED.

WARRANTY CARD IS ALSO AVAILABLE TO COMPLETE ON LINE AT YOUR CONVENIENCE.

COMPANY: __________________________________________________________________________________________________________________________

ADDRESS: __________________________________________________________________________________________________________________________

CITY: ______________________________________________________________________________ STATE: ________________ ZIP: ____________________

DEALER: ____________________________________________________________________________________________________________________________

DATE OF PURCHASE: ________________________________________________________________ INVOICE NUMBER: ____________________________

SERIAL NUMBER: ________________________________________  FRYER  FI LTER SYSTEM  GRIDDLE

REMARKS: ______________________________________________  TOP-SIDE COOKER  HOT PLATE  PASTA PLUS

I HAVE READ THE INSTALLATION AND OPERATION INSTRUCTIONS.

SIGNED: __________________________________________________________________________________ DATE:__________________________________

“Serving Those Who Serve The Very Best “

®

Keating Of Chicago 2006 series, 10x11 BB, 14 BB, 18 BB, 20 BB User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual