Keating Of Chicago 14IFM User Manual
14 INCREDIBLE FRYING MACHINE®GAS
“Serving Those Who Serve The Very Best”
®
2. The Keating frying vessel is 27% Cold Zone, the food
particles collected in the cold zone are unheated and
therefore do not carbonize and contribute to premature
shortening breakdown.
3. Keating’s INSTANT RECOVERY®feature means frying
at lower temperatures (325° – 335°F) extending oil life
while enhancing product quality.
EASY TO CLEAN.
Keating uses only 304 stainless steel in its frying vessel
design and polishes each vessel. The smoother the surface,
the less carbon build-up occurs, making cleaning easier. A
full one inch front drain allows easy draining of oil.
SAFETY CONTROLS ENSURE SAFE AND
ACCURATE COOKING.
The patented and precise thermostat controls cooking
temperatures to ±3°F. Hi-Limit control protects against the oil
and fryer overheating.
Each fryer goes through a rigorous 100% test before shipping
with every component carefully checked. The actual
temperature test chart is included with each fryer.
SPECIAL ORDER OPTIONS.
Keating gives you the widest range of options to ensure your
fryer is exactly suited to your needs.
INCREDIBLE FRYING MACHINE
®
14 IFM GAS
Casters Optional
79,000 BTU input for cooking up to 72 lbs.
of frozen french fries per hour
Instant Recovery
®
for high production
Energy Star performance levels
Save up to 40% in energy costs
New burner technology
Low flue temperatures keep kitchen cooler
Stainless Steel cabinet
Polished Stainless Steel drawn pot with
seamless coved corners uses 24% less oil
Cold Zone 27% of fryer vessel
Save on oil costs/cooks at lower
temperatures
Indicating lights and timers
Easy one button On/Off operation
Documented ASTM efficiency
Instant-On
™
System
The Keating 14 INCREDIBLE FRYING MACHINE®high
efficiency, high production fryer with new burner technology
lets you cook 72 lbs. of frozen fries or chicken per hour with
an input of only 79,000 BTU. The Instant-On™System,
anticipates large loads to handle peak cooking requirements.
Easy to operate, the 14 IFM is equipped with indicating lights
which tell the status of the fryer at all times.
SAVE ON ENERGY COSTS.
The exclusive burner design coupled with the patented heat
reclamation baffle ensure optimum heat transfer while saving
up to 40% in energy costs over atmospheric burner models.
KEATING SAVES OIL COSTS IN THREE WAYS:
BETTER FRY POT DESIGN
LARGER COLD ZONE
INSTANT RECOVERY
®
1. The seamless coved corners of the deep drawn frying vessel
with built-in heat transfer tubes requires 24% less oil while
giving the production of a 50 lb. fryer.
14 INCREDIBLE FRYING MACHINE®GAS
KEATING OF CHICAGO, INC.
1-800-KEATING
www.keatingofchicago.com
As continuous product improvement occurs, specifications may be changed without notice.
INCREDIBLE FRYING MACHINE
®
14 IFM GAS
Printed in U.S.A. 14IFM2007 7/07
Oil BTU Ship
Model No. and Description Capacity Input Height Depth Width Wt.
14 IFM Nat Gas 38 lbs. 79,000 461/2"32
1
/2"15
3
/8" 205 lbs.
14 IFM LP Gas 38 lbs. 79,000 461/2"32
1
/2"15
3
/8" 205 lbs.
14 Safe & Easy - - 461/
2"32
5
/
8 15
3
/
8"-
Heat Transfer Tubes to be three, made of stainless steel
polished to a #7 mirror finish. The middle tube has a
patent applied for recycle baffle inside to increase
efficiency.
Timers to be two electronic, settable from 0 to 99 minutes
with memory repeat and Instant-On
™
Start System.
Thermostat shall be close range, hydraulic type and be
accurate to ±3°F from 300° to 350°F with stainless steel bulb.
Application of this thermostat is patented by Keating.
Hi-Limit Control shall be manually resettable type with
stainless steel bulb.
100% Safety Shut Off shall be electronic type with
combination control gas valve.
Indicating Lights & Switches. “On-Off” switch, Power On
indicating light (white), blower on indicating light (blue),
burner on indicating light (amber), ready to fry light (green),
over max temp light (red).
Standard Accessories to include one pair 4 mesh baskets,
grid screen over heat transfer tubes, drain clean out rod and
sample of Keating Klenzer and Sea Powder. Instant-On
™
.
Electrical Requirements: Supply Voltage 120V 60Hz. Control
Voltage 24V 60Hz. 120 VAC 9ft. (1.5 m) grounded cord set
provided.
Gas Requirements to install are
3
/4" male NPT connection and
3" water column pressures natural and 10" for LP gas at the
fryer burner manifold. Supply pressure to fryers must be 7"
(natural gas) and 11" (LP) water column.
Special Order Options may include battery, common
manifold, casters, cover, central filter, Safe & Easy filter,
security package, basket-lift, computer, full or triple size
baskets, thermostat seal.
DESCRIPTION
The Keating 14 IFM Fryer consists of a frying vessel 14" sq.,
having a splash deck and a splash back installed in a cabinet
equipped with gas burners and an automatic temperature control
mechanism, all arranged and designed for the proper frying of
food.
SPECIFICATIONS
Frying Vessel: shall have coved seamless corners and be
drawn from 18 gauge stainless steel, shall have a shortening
capacity of 38 pounds, shall be equipped with three horizontal
heat transfer tubes spaced above the bottom of the vessel so
that the bottom is unheated and the food particles collecting in
this bottom zone are unheated and therefore do not carbonize.
The frying vessel shall be polished to inhibit carbon build-up
and facilitate easy clean-up. The heat transfer tubes shall be 3"
wide and 5" high. The bottom of the vessel shall slope toward the
front where it shall be equipped with a 1" Teflon core
1
/4 turn, drain
valve, so arranged that the shortening can be drained into a
receiving vessel placed in front of the fryer.
Splashdeck shall slope toward the shortening containing vessel.
The splash deck shall be made of 16 gauge 304 stainless steel.
Splashback shall be made of 18 gauge 304 stainless steel, shall
completely cover the sides of the flue.
Cabinet: shall be made of 18 gauge stainless steel. The cabinet
shall be rigid in construction and shall have four 8" adjustable legs.
A door made of 22 gauge 304 stainless steel shall cover the front
of the cabinet and shall extend from the bottom of the fryer to the
panel, and above the panel shall be a canopy. The door shall be the
full width of the cabinet. No additional space is required for the
door to open a full 90 degrees. A stainless steel flue deflector is to
be provided for installing onto the flue back.
Electronic Ignition automatically lights burners. There is no
standing pilot to struggle to light.
Burners to be two inconel mesh tubular style encased in ceramic
cloth with rated output of 39,500 BTU/hr. natural gas per burner.
5
colson
15 3/8”
35”
WITH NEMA 5-15 PLUG
9 FT. 3-WIRE CORD
FRYER POWER
28”
8
32
1
/2”
46
1
/2”
GAS IN
3
/4” NPT
C
T
O
2
5
0
2
7
5
3
5
0
H
R
B
I
L
A
S
E
T
A
I
D
F
I
T
L
A
375
3
0
0
3
2
5
OFF ON
BLOWER
ON ON
POWERPOWER
ON
BURNER
TO COOK
READY
TEMP.
OVER MAX
1-800-KEATING 1-800-KEATING
Loading...