Keating Of Chicago 10x11 BB Gas User Manual
“Serving Those Who Serve The Very Best”
®
EASY TO CLEAN
Keating uses only 304 stainless steel in its frying vessel
design and polishes each vessel. The smoother the
surface, the less carbon build-up occurs, making cleaning
easier. A full one inch front drain allows easy draining of
oil.
SAFETY CONTROLS ENSURE SAFE AND
ACCURATE COOKING
The patented and precise thermostat controls cooking
temperatures to ± 3°F. Hi-Limit control protects against
the oil and fryer overheating.
Each fryer goes through a rigorous 100% test before
shipping with every component carefully checked. The
actual temperature test chart is included with each fryer.
SPECIAL ORDER OPTIONS
Keating gives you the widest range of options to ensure
your fryer is exactly suited to your needs.
INSTANT RECOVERY
®
FRYER 10×11 BB GAS
The 10×11 BB Fryer is ideal for multi-product use. The
10×11 BB allows you to cook up to 40 lbs. of frozen french
fries per hour with an input of 54,000 BTU.
KEATING SAVES OIL COSTS IN THREE WAYS:
BETTER FRY POT DESIGN
LARGER COLD ZONE
INSTANT RECOVERY
®
1. You shouldn't have to wait on the fryer. A properly
designed fry pot ensures that the fryer has recovered its
temperature before the end of the cooking cycle. Keating
“INSTANT RECOVERY”®means continuous
performance.
2. The Keating frying vessel is 27% Cold Zone, the food
particles collected in the cold zone are unheated and
therefore do not carbonize and contribute to premature
shortening breakdown.
3. Keating’s “INSTANT RECOVERY”®feature means
frying at lower temperatures (325° – 335°F) extending
oil life while enhancing product quality.
10×11 BB GAS
54,000 BTU input for cooking up to 40
lbs. of frozen french fries per hour
Instant Recovery®Fryer now even
more efficient using less energy with
our newly patented Wing Turbulators
®
Stainless Steel cabinet
Polished Stainless Steel fryer vessel
Extra large Cold Zone
Save on oil costs/cooks at lower
temperatures
Indicating lights
Melt cycle standard
As continuous product improvement occurs, specifications may be changed without notice.
DESCRIPTION
The Keating Instant Recovery®10×11 BB Fryer consists
of a frying vessel 10"×11", having a splash deck and a
splash back installed in a cabinet equipped with gas
burners and an automatic temperature control mechanism,
all arranged and designed for the proper frying of food.
SPECIFICATIONS
Fryer Vessel shall be constructed from 18 gauge
stainless steel, shall have a shortening capacity of 26
pounds, shall be equipped with two 18 gauge stainless
steel horizontal heat transfer tubes spaced above the
bottom of the vessel so that the bottom is unheated and
the food particles collecting in this bottom zone are
unheated and therefor do not carbonize. The frying
vessel shall be polished to inhibit carbon build-up and
facilitate easy clean-up. The heat transfer tubes shall be
3" wide and 5" high. The bottom of the vessel shall slope
toward the front where it shall be equipped with a 1"
Teflon core 1/
4 turn, drain valve, so arranged that the
shortening can be drained into a receiving vessel placed in
front of the fryer.
Splashdeck shall slope toward the shortening containing
vessel. The splash deck shall be made of 16 gauge 304
stainless steel.
Splashback shall be made of 18 gauge 304 stainless
steel, shall completely cover the sides of the flue.
Cabinet: shall be made of 18 gauge stainless steel. The
cabinet shall be rigid in construction and shall have four 8"
adjustable legs. A door made of 22 gauge 304 stainless steel
shall cover the front of the cabinet and shall extend from the
bottom of the fryer to the panel, and above the panel shall be a
canopy. The door shall be the full width of the cabinet. No
additional space is required for the door to open a full 90
degrees. A stainless steel flue deflector is provided for installing
onto the flue back.
Heat Transfer Tubes to be two, made of stainless steel
polished to a #7 mirror finish.
Thermostat to be close range, hydraulic type and be
accurate to ±3°F from 300° to 350°F with stainless steel
bulb. Application of this thermostat is patented by
Keating.
Hi-Limit Control to be manually resettable type with
stainless steel bulb.
100% Safety Shut Off to be flame switch type with
combination control gas valve.
Melt Cycle to be standard on "BB" fryers, allowing the
safe melting of solid shortening. Fryer is to be left in the
Melt Cycle mode until oil completely covers heat transfer
tubes.
Indicating Lights & Switches. Power on switch, push to
light switch, pilot on light, fry off melt switch.
Standard Accessories to include one pair 4 mesh baskets,
grid screen over heat transfer tubes, drain clean out rod,
sample of Keating Klenzer and Sea Powder.
Electrical Requirements: Supply Voltage 120V 60Hz.
Control Voltage 24V 60Hz. 120 VAC 9ft. (1.5 m)
grounded cord set provided.
Gas Requirements to install are 3/4" male NPT connection
and 4" water column pressures natural and 10" for LP gas at
the fryer burner manifold. Supply pressure to fryers must be
7” (natural gas) and 11” (LP) water column.
Special Order Options may include battery, common
manifold, rear drain, casters, thermostat seals, portable
filter, central filter (CF SE14), cover, full size baskets,
security package, spark ignition.
INSTANT RECOVERY
®
FRYER 10×11 BB GAS
Printed in U.S.A. 10x11BBg2006 12/06
Oil BTU Ship
Model No. and Description Capacity Input Height Depth Width Wt.
10×11 BB Nat Gas 26 lbs. 54,000 461/2"26
1
/2"12
3
/8" 125 lbs.
10×11 BB LP Gas 26 lbs. 50,000 461/2"26
1
/2"12
3
/8" 125 lbs.
KEATING OF CHICAGO, INC.
Toll Free 1-800-KEATING
www.keatingofchicago.com
10×11 BB GAS
Loading...