Keating Of Chicago 10x11AA Gas User Manual

The 10×11 AA Fryer requires no electrical connections and
is ideal for use in remote locations. The 10×11 AA allows
you to cook up to 40 lbs. of frozen french fries per hour
with an input of 54,000 BTU.

KEATING SAVES OIL COSTS IN THREE WAYS:

BETTER FRY POT DESIGN

LARGER COLD ZONE

INSTANT RECOVERY

®

1. You shouldn't have to wait on the fryer. A properly
designed fry pot ensures that the fryer has recovered its
temperature before the end of the cooking cycle. Keating
“INSTANT RECOVERY”®means continuous
performance.

2. The Keating frying vessel is 27% Cold Zone, the food
particles collected in the cold zone are unheated and
therefore do not carbonize and contribute to premature
shortening breakdown.

3. Keating’s “INSTANT RECOVERY”®feature means
frying at lower temperatures (325° – 335°F) extending
oil life while enhancing product quality.

“Serving Those Who Serve The Very Best”

®

EASY TO CLEAN

Keating uses only 304 stainless steel in its frying vessel
design and polishes each vessel. The smoother the surface,
the less carbon build-up occurs, making cleaning easier. A
full one inch front drain allows easy draining of oil.

SAFETY CONTROLS ENSURE SAFE AND

ACCURATE COOKING

The patented and precise thermostat controls cooking
temperatures to ± 3°F. Hi-Limit control protects against
the oil and fryer overheating.
Each fryer goes through a rigorous 100% test before
shipping with every component carefully checked. The
actual temperature test chart is included with each fryer.

SPECIAL ORDER OPTIONS

Keating gives you the widest range of options to ensure
your fryer is exactly suited to your needs.

INSTANT RECOVERY

®

FRYER 10×11 AA GAS

10×11 AA GAS



54,000 BTU input for cooking up to 40
lbs. of frozen french fries per hour



Instant Recovery®Fryer now even more
efficient using less energy with our
newly patented Wing Turbulators

®



Stainless Steel cabinet



Polished Stainless Steel fryer vessel



Extra large Cold Zone



No electrical connections needed



Saves on oil costs/cooks at lower
temperatures

Casters Optional

As continuous product improvement occurs, specifications may be changed without notice.

DESCRIPTION

The Keating Instant Recovery

®

10×11 AA Fryer consists of a
frying vessel 10"×11", having a splash deck and a splash
back installed in a cabinet equipped with gas burners and an
automatic temperature control mechanism, all arranged and
designed for the proper frying of food.

SPECIFICATIONS
Frying Vessel: shall be constructed from 18 gauge stainless

steel, shall have a shortening capacity of 26 pounds, shall
be equipped with two 18 gauge horizontal heat transfer
tubes spaced above the bottom of the vessel so that the
bottom is unheated and the food particles collecting in this
bottom zone are unheated and therefore do not carbonize.
The frying vessel shall be polished to inhibit carbon build­up and facilitate easy clean-up. The heat transfer tubes shall

be 3" wide and 5" high. The bottom of the vessel shall slope
toward the front where it shall be equipped with a 1" Teflon
core

1

/

4 turn, drain valve, so arranged that the shortening can be

drained into a receiving vessel placed in front of the fryer.

Splashdeck shall slope toward the shortening containing
vessel. The splash deck shall be made of 16 gauge 304

stainless steel.

Splashback shall be made of 18 gauge 304 stainless steel,

shall completely cover the sides of the flue.

Cabinet: shall be made of 18 gauge stainless steel. The

cabinet shall be rigid in construction and shall have four 8"
adjustable legs. A door made of 22 gauge 304 stainless steel

shall cover the front of the cabinet and shall extend from the
bottom of the fryer to the panel, and above the panel shall be a

canopy. The door shall be the full width of the cabinet. No
additional space is required for the door to open a full 90
degrees. A stainless steel flue deflector is provided for installing
onto the flue back.

Heat Transfer Tubes to be two, made of stainless steel

polished to a #7 mirror finish.

Thermostat shall be close range, hydraulic type and be

accurate to ±3°F from 300° to 350°F with stainless steel
bulb. Application of this thermostat is patented by Keating.

Hi-Limit Control shall be manually resettable type with
stainless steel bulb.

100% Safety Shut Off shall be millivolt type with
combination control gas valve and thermopile.

Standard Accessories to include one pair 4 mesh baskets,
grid screen over heat transfer tubes, drain clean out rod,
sample of Keating Klenzer and Sea Powder.

Electrical Requirements are not necessary on AA models.

Gas Requirements to install are

3

/4" male NPT connection
and 4" water column pressures natural and 10" for LP gas at
the fryer burner manifold. Supply pressure to fryers must be
7" (natural gas) and 11" (LP) water column.

Special Order Options may include battery, common
manifold, rear drain, casters, cover, thermostat seals, portable
filter, central filter (CF14SE), full size baskets, security
package.

INSTANT RECOVERY

®

FRYER 10×11 AA GAS

Printed in U.S.A. 10x11AA2006 12/06

Oil BTU Ship

Model No. and Description Capacity Input Height Depth Width Wt.

10×11 AA Nat Gas 26 lbs. 54,000 461/2"26

1

/2"12

3

/8" 125 lbs.

10×11 AA LP Gas 26 lbs. 50,000 461/2"26

1

/2"12

3

/8" 125 lbs.

KEATING OF CHICAGO, INC.

Toll Free 1-800-KEATING

www.keatingofchicago.com

10×11 AA GAS