How it Works
KAWAI
Loading...
DG30
User Manual
152 pgs3.28 Mb0
User manual
152 pgs3.27 Mb0
Table of contents
Loading...

KAWAI DG30 User Manual

DG30
Owner’s Manual
Important Information
Preparation
Basic Operation
Adjustments & Settings
Appendix

Important Safety Instructions

Important Safety Instructions
SAVE THESE INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
AVIS : RISQUE DE CHOC ELECTRIQUE
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.
Examples of Picture Symbols
denotes that care should be taken. The example instructs the user to take care not to allow ngers to be trapped.
denotes a prohibited operation. The example instructs that disassembly of the product is prohibited.
denotes an operation that should be carried out. The example instructs the user to remove the power cord plug from the AC outlet.
Read all the instructions before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specied by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or object have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- NE PAS OUVRIR.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the leterature accompanying the product.
3
Règles de sécurité
CONSERVEZ CES INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOTOPEN
(Supplémentairespour le Canada)
AVERTISSEMENT
POUR REDUIRELES RISQUES
D’INCENDIE OU D’ELECTROCUTION, PROTEGEZ CET APPAREILDELA PLUIEOUDEL’HUMIDITE.
AVIS :RISQUEDECHOCELECTRIQUE
POURREDUIRE LESRISQUES D’INCENDIE OU D’ELECTROCUTION, NEDEMONTEZPAS LE COUVERCLE (OUL’ARRIERE). A L’ INTERIEUR,AUCUNE PA RTIE N’ESTREPARABLEPAR L’ UTILISATEUR. POURLAMAINTENANCE, ADRESSEZ-VOUS A DU PERSONNELQUALIFIE.
Le symbole de l’éclair avec une pointe de flèche à l’intérieur d’un triangle équilatéral met en garde l’utilisateur contre la présence de tension dangereuse, non isolée, à l’intérieur de l’appareil, dont l’amplitude peut être suffisante pour induire un risque d’électrocution d’une personne.
Exemples de symboles graphiques
Indique que des précautions doivent être prises. L’ exemple indique à l’utilisateur qu’il doit faire attention à ne pas se faire coincer les doigts.
Indique une manipulation interdite. L’ exemple indique que le démontage de l’appareil est interdit.
Indique qu’une manipulation doit être effectuée. L’ exemple indique à l’utilisateur qu’il doit débrancher le câble d’alimentation de la prise secteur.
AVERTISSEMENT
Faite attention de ne pas introduire un produit étranger à l’intérieur de l’appareil.
Ce produit n’est pas totalement déconnecté du circuit électrique lorsqu’il est mis hors tension par le bouton d’arrêt. Si l’appareil ne doit pas être utilisé pendant une longue période, débranchez le câble d’alimentation de la prise secteur.
-NEPAS OUVRIR.
Le point d’exclamation à l’intérieur d’un triangle équilatéral alerte l’utilisateur de la présence de règles d’utilisation et d’entretien importantes dans la notice qui accompagne l’appareil.
Indique un risque potentiel qui peut entraîner la mort, ou de graves lésions, si l’appareil n’est pas manipulé correctement.
L’introduction d’eau, d’aiguilles ou d’épingles à cheveux, peut provoquer une panne ou un court-circuit. Ce produit doit être mis à l’abri des écoulements ou projections d’eau. Ne jamais placer sur le produit des objets contenant des liquides, tels que des vases ou autres récipients.
Si vous ne le faisiez pas la foudre pourrait provoquer un incendie.
Si vous ne le faisiez pas, la surchauffe de l’appareil pourrait provoquer un incendie.
Il est recommandé de placer l’instrument à proximité de la prise de courant et de positionner le câble d’alimentation secteurdesorte qu’ilpuisseêtre débranché rapidement en casd’urgence,lecourant électrique étanttoujours présenttant quela prise est branchée même si le bouton de mise en marche esten position Arrêt.
[Seuls les produits avec 3P fiche]
INSTRUCTIONS DE MISE À LA TERRE
Ce produit doit être mis à la terre. En cas de défaillance matérielle ou de panne, la mise à la terre fournit un chemin de moindre résistance au courant électrique afin de réduire le risque d’électrocution. Ce produit est équipé d’un câble avec un conducteur de protection et une fiche de mise à la terre. La fiche doit être branchée dans une prise appropriée correctement installée et mise à la terre conformément à tous les codes et règlements locaux.
DANGER - La connexion incorrecte du conducteur de protection peut présenter un risque d’électrocution. Consultez un électricien ou un réparateur qualifié si vous avez des doutes en ce qui concerne la mise à la terre du produit. Ne modifiez pas la fiche fournie avec le produit – si elle n’est pas adaptée à la prise, faites installer une prise correcte par un électricien qualifié.
Indique un risque potentiel qui peut entraîner la détérioration,
PRECAUTION
Description de la l'emplacement de la reference (Le cas échéant): Anglais phrase: The nameplate label is located on the underside of the instruments, as indicated below. Français phrase: La reference commerciale est inscrite sur une etiquette en dessous de votre instrument, conformement a l’indication ci-dessous.
Votre piano doit être placé à un endroit tel que sa position n’altère pas sa propre ventilation. Gardez une distance minimum de 5 cm autour de l’instrument pour une aération suffisante.
ou des dommages, pour l’appareil ou ses propriétés, si celui-ci n’est pas manipulé correctement.
4
WARNING - When using electric products, basic precautions should always be followed, including the following.
WARNING
The product should be connected to an AC outlet of the specied voltage.
Do not insert or disconnect the power cord plug with wet hands.
Take care not to allow any foreign matter to enter the product.
The chair must be used properly (it must be used only when playing the product).
Do not play with it or stand on it.  Only one person is allowed to sit on it.Do not sit on it when opening the lid.  Re-tighten the bolts occasionally.
When using the headphones, do not listen for long periods of time at high volume levels.
Indicates a potential hazard that could result in death or serious injury if the product is handled incorrectly.
120V 240V230V
If you are going to use an AC power cord, make sure that its has the correct plug shape and conforms to the specied power voltage.
Failure to do so may result in re.
Doing so may cause electric shock.
Entry of water, needles or hair pins may result in breakdown or short-circuit. The product shall not be exposed to dripping or splashing. No objects lled with liquids, such as vases, shall be placed on the product.
Doing so may cause the chair to fall over or your ngers to be trapped, resulting in injury.
Doing so may result in hearing problems.
Do not lean against the keyboard.
Do not disassemble, repair or modify the product.
When disconnecting the AC power cord's plug, always hold the plug and pull it to remove it.
The product is not completely disconnected from the power supply even when the power switch is turned o. If the product will not be used for a long time, unplug the AC power cord from the AC outlet.
Doing so may cause the product to fall over, resulting in injury.
Doing so may result in product breakdown, electric shock or short-circuit.
Pulling the AC power cord itself may damage the cord, causing a re, electric shock or short-circuit.
Failure to do so may cause re in case of
lightning.
Failure to do so may over-heat the product,
resulting in re.
This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician to replace your obsolete outlet. Do not defeat the safety purpose of the plug.
This product shall be near the AC outlet and the power cord plug in a position so that it can readily be disconnected in an emergency because electricity is always charging while the plug is in the AC outlet even in a power switch o condition.
5
CAUTION
Indicates a potential hazard that could result in injury or damage to the product or other property if the product is handled incorrectly.
Do not use the product in the following areas.
Areas, such as those near windows, where the product is
exposed to direct sunlight
Extremely hot areas, such as near a heaterExtremely cold areas, such as outside
Extremely humid areas
Areas where a large amount of sand or dust is present
Areas where the product is exposed to excessive
vibrations
When you close the keyboard cover, close it gently.
Before connecting cords, make sure that the power to this product and other devices is turned OFF.
Do not drag the product on the oor. Take care not to drop the product.
Do not place the product near electrical appliances such as TVs and radios.
OFF
Using the product in such areas may result in product breakdown. Use the product only in moderate climates (not in tropical climates).
Closing it roughly may trap your ngers, resulting in injury.
Failure to do so may cause breakdown of this product and other devices.
Please lift up the product when moving it. Please note that the product is heavy and must be carried by more than two persons. Dropping the product may result in breakdown.
Doing so may cause the product to generate

noise.
 If the product generates noise, move the
product suciently away from the electrical appliance or connect it to another AC outlet.
When connecting the AC power cord and other cords, take care not to get them tangled.
Do not wipe the product with benzene or thinner.
Do not stand on the product or exert excessive force.
Do not place naked ame, such as lighted candles on the product.
Ensure that the ventilation is not impeded by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc.
Failure to do so may damage them, resulting in re, electric shock or short-circuit.
 Doing so may result in discoloration or deformation
of the product.
 When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the product.
Doing so may cause the product to become deformed or fall over, resulting in breakdown or injury.
Doing so may cause the illumination to fall over, resulting in re.
Failure to do so may over-heat the product, resulting in re.
The product should be located so that its location or position does not interfere with its proper ventilation. Ensure a minimum distance of 5cm around the product for sucient ventilation.
6
The product should be serviced by qualied service personnel when:
The power supply cord or the plug has been damaged.
Objects have fallen, or liquid has been spilled into the product.
  The product has been exposed to rain.The product does not appear to operate normally or exhibits a marked change in performance.The product has been dropped, or the enclosure damaged.
Notes on Repair
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then contact the shop from which the product was purchased.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION:
Pour éviter les chocs électriques, introduire la lame la plus large de la che dans la borne correspondante de la prise et pousser jusqu'au fond.
An information on Disposal for users
If your product is marked with this recycling symbol it means that, at the end of its life, you must dispose of it separately by taking it to an appropriate collection point. You should not mix it with general household waste. Disposing of this product correctly will prevent potential negative eects on the environment and human health which could otherwise arise due to inappropriate waste handling. For further details, please contact your local authority. (European Union only)
Instruction for AC power cord (U.K.)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
BLUE : NEUTRAL BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Do not plug either terminal of the power cord to the the ground od AC outlet on the wall.
FCC Information (U.S.A)
CAUTION : Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
The nameplate label is located on the
Declaration of Conformity
Products : Electronic Piano
Model Number : DG30 Responsible Party Name : Kawai America Corporation Address : 2055 East University Drive Rancho Dominguez, CA 90220 Telephone 310-631-1771
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This applies only to products distributed by Kawai America Corporation.
underside of the instrument, as
indicated below.
Nameplate
7
Introduction

Introduction

Thank you for purchasing this Kawai Concert Artist DG30 digital piano.
This owner’s manual contains important information regarding the instrument’s usage and operation. Please read all sections carefully, keeping this manual handy for future reference.
About this owner’s manual
This owner’s manual provides information for customers to enjoy using this instrument immediately after purchase, and
explanations about the various functions of this instrument.
Display illustrations shown in this manual may dier from the actual displays of the product depending on its version.
Nameplate
The model name and serial number of the product are indicated on the nameplate label located on the underside of the instrument.
Cleaning
Make sure to unplug the power cord before cleaning.
Clean the product body with a dry, soft cloth.
If the surface of the pedals becomes dirty, clean the pedals using a dry dish-washing sponge. Note that cleaning the gold pedals
using a cloth may cause the pedals to become dull.
Do not attempt to clean the pedals using rust-removing solvents, abrasives or les.
Do not clean the product using benzine or thinner which may cause discoloring or deformation.
Intellectual property rights
“Windows” is a registered trademark of Microsoft Corporation.
“Mac” is a registered trademark of Apple Computer, Inc.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by
Kawai Musical Instruments Mfg. Co., Ltd. is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Other company names and product names mentioned or referenced herein are registered trademarks or trademarks of respective
owners.
Kawai Musical Instruments Mfg. Co., Ltd. shall have no liability for any acts in violation of the Copyright Act made by any users of
this product.
8

Owner’s Manual Conventions

This owner’s manual utilises a number of illustrative conventions in order to explain the DG30 digital piano’s various
functions. The examples below provide an overview of the button LED indicator states and press types, and the
appearance of dierence kinds of text.
Button LED indicator states
LED indicator o:
Sound/Function is not selected.
Button press types
Normal press:
Select a sound or function.
hold
Press and hold:
Select a function’s settings, or store registration memories etc.
LED indicator on:
Sound/Function is selected.
× 2
Press twice:
Select a sound or function.
hold
Press and hold, then press X:
Combine two sounds.
LED indicator ashing:
Sound/Function is selected in a temporary state.
× 4
Press multiple times:
Cycle through sounds or settings.
Text appearance
Normal instruction and explanation text is written in regular type at 9 pt. size.
Captions explaining the LCD display or button functions, are written in bold type at 8.5 pt. size.
* Notes about functions are marked with an
asterisk and written in 8 pt. size.
Example operations are written in italic type at 8 pt. size, and enclosed within a grey box.
Reminders about previous operations are written in italic type at 9 pt. size.
9
Table of ContentsTable of Contents

Table of Contents

Important Information
Important Safety Instructions ....................... 3
Introduction .......................................... 8
Owner’s Manual Conventions ....................... 9
Table of Contents ...................................10
Part Names and Functions .......................... 12
Preparation
Setting Up the Piano ................................ 14
1. Power ......................................... 14
2. Key cover and music rest ...................... 15
3. Volume and headphones ..................... 16
4. Pedals ......................................... 17
Basic Operation
Selecting Sounds .................................... 19
Dual Mode ........................................... 20
Split Mode ........................................... 22
Four Hands Mode ................................... 24
Reverb ............................................... 26
Concert Magic .......................................46
1. Performing a Concert Magic song ............46
2. Concert Magic demo mode ................... 47
3. Concert Magic settings .......................48
Steady Beat mode ............................48
4. Concert Magic song arrangement types ...... 49
Internal Recorder ................................... 50
1. Recording a song .............................50
2. Playing a song ................................ 52
3. Internal Recorder Edit menu ..................53
4. Erasing a part/song ........................... 54
5. Converting a song to an audio le ............55
USB Recorder ........................................ 56
1. Recording an MP3/WAV audio le ............56
2. Playing an MP3/WAV audio le ...............58
3. Recording a MIDI song le ....................60
4. Playing a MIDI song le ....................... 62
5. USB Recorder Edit menu ......................64
6. Converting a MIDI song le to an MP3/WAV
audio le ......................................65
7. Overdubbing an MP3/WAV audio le .........66
8. Recording to an existing MIDI song le ....... 67
Eects ............................................... 28
Virtual Technician ...................................30
1. Smart Mode ................................... 30
2. Advanced Mode .............................. 31
Metronome / Drum Rhythms ....................... 32
Registration Memories ..............................34
1. Selecting a Registration memory .............34
2. Storing a Registration memory ...............35
3. Registration Edit menu .......................36
Panel Lock ........................................... 37
Demo Songs .........................................38
Piano Music .........................................39
Lesson Function ..................................... 40
1. Selecting a lesson book/song .................40
2. Listening to the selected lesson song ......... 41
3. Lesson Function settings ..................... 42
4. Repeating sections of a lesson song .......... 43
5. Recording a lesson song practice .............44
6. Finger Exercises ...............................45
Adjustments & Settings
Function menus .....................................68
Basic Settings .......................................69
1. Key Transpose ................................. 70
2. Song Transpose ............................... 71
3. Tone Control ..................................72
User Tone Control ............................. 73
4. Speaker Volume ............................... 74
5. Tuning ........................................75
6. Damper Hold .................................76
7. Split ...........................................77
8. Four Hands .................................... 78
9. Startup Setting ................................ 79
10. Factory Reset .................................80
11. Auto Display O ..............................81
12. Auto Power O ................................82
10
Virtual Technician Settings .........................83
1. Touch Curve ..................................85
User Touch Curve .............................86
2. Voicing ........................................87
User Voicing ...................................88
3. Damper Resonance ........................... 89
4. Damper Noise ................................. 90
5. String Resonance ............................. 91
6. Undamped String Resonance .................92
7. Cabinet Resonance ........................... 93
8. Key-o Eect ..................................94
9. Fall-back Noise ................................95
10. Hammer Delay ................................96
11. Topboard Simulation ......................... 97
12. D ecay Time ................................... 98
13. Minimum Touch .............................. 99
14. Stretch Tuning ...............................10 0
User Tuning ..................................101
15. Temperament ................................102
User Temperament .......................... 103
16. Temperament Key ...........................10 4
17. Key Volume ..................................105
User Key Volume .............................10 6
18. H al f-Pedal Adjust ............................107
19. Soft Pedal Depth .............................10 8
Bluetooth Settings ................................. 127
1. Bluetooth Audio ............................. 12 8
2. Bluetooth Audio Volume ..................... 12 9
3. Bluetooth MIDI ............................... 13 0
Appendix
Assembly Instructions ............................. 131
Connecting to Other Devices ......................13 4
Jack Panel ........................................13 5
Headphone Panel ................................135
Troubleshooting ...................................13 6
Demo Song List ....................................13 8
Settings List ........................................ 139
Sound List ..........................................141
Drum Sound Mapping List ......................... 145
Drum Rhythm List .................................. 147
Information about Bluetooth® .....................148
EU Declaration of Conformity .....................149
Specications ...................................... 150
Phones Settings ....................................109
1. SHS Mode .................................... 110
2. Phones Type ..................................111
3. Phones Volume .............................. 112
USB MIDI
(USB to Host connector) ........................ 113
USB Menu ..........................................11 4
1. Load Song ...................................115
2. Load Registration All ......................... 116
3. Load Registration Single ..................... 117
4. Load Startup Setting ......................... 11 8
5. Save Internal Song ........................... 119
6. Save SMF Song ...............................12 0
7. Save Registration All ......................... 121
8. Save Registration Single .....................122
9. Save Startup Setting .........................12 3
10. Rename File .................................. 124
11. Delete File ...................................12 5
12. Format USB ..................................126
* For information regarding MIDI functions and settings, please
download the supplementary PDF manual from the Kawai Japan website: http://www.kawai-global.com/support/manual/
11
Part Names and FunctionsPart Names and Functions

Part Names and Functions

③
④
⑤
①
⑥ ⑧
⑨
⑦ ⑩
②
⑪
⑫
DG30
12
m
n
o
MIDI
OUT IN
USB to HOST
qp r
DC IN 15V
s t
PEDAL
a POWER button
This switch is used to turn the instrument on/o. Be sure to turn o the instrument after playing.
* The DG30 digi tal piano features a power savi ng mode that can turn o the
instrument automatically after a specied period of inactivity. For more information, please refer to the “Auto Power O” setting on page 82.
b MASTER VOLUME slider
This slider controls the master volume level of the instrument’s built-in speakers or headphones, if connected.
* The MASTER VOLUME slider will also aect the volume level of the
LINE OUT connectors.
c LCD display
The LCD display provides useful information such as the currently selected sound name, settings values, and the status of other functions when active. An example of the main play screen is shown below.
Headphones statusTranspose status
Bluetooth
status
Function/Settings menuVirtual Technician
* A protective plastic lm is attached to the display during production.
Please remove this lm before attempting to play the instrument.
USB device status
Selected sound
Music menu
j REC button
This button is used to record performances to internal memory or a USB memory device as MP3/WAV audio les.
k SOUND buttons
These buttons are used to select the sound(s) that will be heard when playing the keyboard of the DG30 digital piano. Multiple sounds are assigned to each category button, and can be selected by pressing the same button repeatedly.
These buttons are also used to select Registration memories.
l REGISTRATION button
This button is used to store and recall one of the sixteen dierent registration memories. Each registration can store sound, reverb and eects settings, as well as various other panel options.
m USB to DEVICE port
This port is used to connect a FAT or FAT32 formatted USB memory device to the instrument in order to load /save recorded song data, registration memories, and MP3/WAV/SMF les etc.
n PHONES jacks
These jacks are used to connect stereo headphones to the DG30 digital piano. 1/4” and 1/8” connectors are provided for convenience, and both can be used simultaneously, allowing two pairs of headphones to be connected at the same time.
d FUNCTION button
These buttons are used to select one of three functions/options shown at the bottom of the LCD display.
e ARROW buttons
These buttons are used to navigate around the various menus and screens, adjust values, and answer on-screen prompts.
f EFFECTS button
This button is used to turn eects for the selected sound on/o, to select the dierent eect types, and to adjust their settings.
g REVERB button
This button is used to turn reverb for the selected sound on/o, to select the dierent reverb types, and to adjust their settings.
h METRONOME button
This button is used to turn the metronome function on/o, and to adjust the tempo, time signature/beat, and volume settings.
i PL AY/STO P but t o n
This button is used to start/stop the playback of demonstration songs, Piano Music pieces, and Lesson and Finger Exercises, and to start/stop the recording and playback of recorder songs, and MP3/WAV audio les.
o MIDI IN / OUT jacks
These jacks are used to connect the DG30 digital piano to external MIDI devices such as other musical instruments or a computer in order to send and receive MIDI data.
* For more information about the instrument’s connectors and jacks,
please refer to “Connecting to Other Devices” on page 134.
p USB to HOST port
This port is use to connect the DG30 digital piano to a computer using a USB “B to A” type cable in order to send and receive MIDI data.
q DC IN 15V connector
This connector is used to connect the power adaptor to the piano.
r PEDAL connector
This connector is used to connect the pedal board to the piano.
s LINE OUT jacks
These jacks are used to connect the stereo output (Left/Right 1/4” phone plug) of the DG30 digital piano to external ampliers, mixers, recording devices, and similar equipment.
t LINE IN jacks
These jacks are used to connect the stereo output (Left/Right 1/4” phone plug) from audio equipment, computers, or other electronic instruments to the DG30 digital piano’s amplier and speakers.
13
Setting Up the PianoSetting Up the Piano

Setting Up the Piano

1

Power

1. Connecting the power adaptor to the instrument
Connect the AC power adaptor to the DC IN terminal located on the underside of the instrument, as indicated below.
2. Connecting the power adaptor to an outlet
Connect the AC power adaptor to an AC outlet.
3. Turning on the power
Press the [POWER] button, located on the right hand side of the instrument’s front panel.
The instrument will turn on, and the words “SK Concert Grand” will be shown in the display, indicating that the SK Concert Grand sound is selected, and the instrument is ready to be played.
* The DG30 digital piano incorporates power saving features that can
turn o the display and the instrument automatically after a specied period of inactivity. For more information, please refer to the “Auto Display O” and “Auto Power O” settings on pages 81 and 82.
14
2

Key cover and music rest

Opening the key cover
Gently lift the key cover with both hands, then slowly push it back, into the instrument’s body.
To close the key cover, slowly pull the handle with both hands, then gently lower it downward.
* Please close the lid slowly in order to avoid injury.
Adjusting the music rest
Lift the music rest, then lower the metal prop (rear side) into the recessed holder to set the desired music rest angle.
* The music rest can be set to one of three dierent angle positions.
Prop and holder
To lower the music rest, gently lift the prop from the recessed holder, then lower the music rest.
* Please lower the music rest slowly in order to avoid injury.
15
Setting Up the PianoSetting Up the Piano
3

Volume and headphones

Adjusting the volume
The [MASTER VOLUME] slider controls the volume level of the instrument’s speakers, or headphones if connected.
Move the slider up to increase the volume, and down to decrease the volume.
Use this slider to set the volume to a comfortable listening level – the middle is often a good starting point.
* The MASTER VOLUME slider will also aect the volume level of the
LINE OUT connectors.
* The maximum volume level of the speakers can be reduced by using
the “Speaker Volume” setting. Please refer to page 74 for more information.
Increase
volume
Decrease
volume
Using headphones
Use the jacks located beneath the keyboard on the left hand side, to connect stereo headphones to the DG30 digital piano. 1/4” and 1/8” connectors are provided for convenience.
Two pairs of headphones can be connected and used simultaneously.
When a pair of headphones is connected, sound will not be produced by the speakers. In addition, the headphones icon will appear at the top of the display.
Headphones connected
Attaching the headphone hook (optional)
A headphone hook is included with the DG30 digital piano and can be used to hang headphones when not in use.
If desired, attach the headphone hook to the underside of the keyboard as shown in the illustration opposite.
* For more information, please refer to the “Assembly Instructions” on
pa ge 131.
16
4

Pedals

As with a grand piano, the DG30 digital piano features three pedals: sustain, sostenuto, and soft.
Sustain pedal (right pedal)
Depressing this pedal sustains the sound after one’s hands have been lifted from the keyboard – greatly enriching the piano sound, while also assisting smooth “legato” passages.
The sustain pedal is capable of responding to half pedaling.
Soft pedal
Sostenuto pedal
Sustain pedal
Soft pedal (left pedal)
Depressing this pedal softens the sound, reducing its volume.
When the Jazz Organ sound is selected, the soft pedal is also used to alternate the speed of the rotary simulation between “Slow” and “Fast” eect modes.
Pedal support bolt
A pedal support bolt is attached at the base of the pedal board to aid stability when the pedals are pushed.
Turn the bolt anti-clockwise until it makes contact with the oor and supports the pedals rmly. If the pedal support bolt does not make contact with the oor, the pedal board may become damaged.
When moving the instrument, always adjust or remove the pedal support bolt, then readjust when the instrument is in its new position.
Sostenuto pedal (centre pedal)
Depressing this pedal after playing the keyboard and before releasing the keys, sustains the sound of only those notes that have been played. Any keys that are subsequently played after the sostenuto pedal is depressed will not be sustained.
Pedal support bolt
Caring for the pedals
If the surface of the pedals becomes dirty, clean the pedals using a dry dish-washing sponge. Do not attempt to clean the pedals using rust-removing solvents, abrasives or les.
Grand Feel Pedal System
The DG30 digital piano features the Grand Feel Pedal System, which replicates the sustain, soft, and sostenuto pedal weighting of a Shigeru Kawai SK Concert Grand piano.
17
18

Selecting Sounds

The DG30 digital piano features a wide selection of realistic instrument sounds suitable for various musical styles.
Sounds are arranged into eight categories, with several sounds assigned to each category button. For a complete
listing of available instrument sounds, please refer to page 9 of the MIDI Settings manual.
By default, the “SK Concert Grand” sound will be selected automatically when the instrument is turned on.
Selecting a sound
Press the desired SOUND button.
The LED indicator for the button will turn on to indicate that this category has been selected, and the name of the sound will be shown in the LCD display.
Changing the sound
Several sounds are assigned to each category button.
Press the selected category button repeatedly to cycle through the dierent sound variations.
LED indicator on:
Sound category is selected.
Example: To select the E.PIANO category, press the E.PIANO button.
× 3
The  or  buttons can also be used to select sounds and cycle through the dierent sound variations.
* When selecting sounds assigned to the OTHERS category button,
pressing and holding the  button then pressing the  button (and vice versa), can be used to cycle through the various sub-categories more quickly.
Example: To select the “SK-5 Grand Piano” sound, press the PIANO 1 button three times.
19
Dual ModeDual Mode

Dual Mode

The Dual Mode function allows two sounds to be layered together, creating a more complex sound.
For example, a piano sound layered with strings, or a church organ combined with a choir, etc.
1. Entering Dual mode
Press and hold a SOUND button to select the main sound, then press another SOUND button to select the layered sound.
The LED indicators for both SOUND buttons will turn on to indicate that Dual Mode is in use, and the respective sound names will be shown in the LCD display.
Main sound
Layered
sound
2a. Changing the main/layered sounds: Method 1
To select a dierent variation for the layered sound:
Press and hold the main SOUND button, then press the layered SOUND button repeatedly to cycle through the dierent sound variations.
hold
hold
Example: To change the layered “Slow Strings” sound to the “Warm Strings” sound, press and hold the PIANO 1 button, then press the STRINGS button t wice.
× 2
To select a dierent variation for the main sound:
Press and hold the layered SOUND button, then press the main SOUND button repeatedly to cycle through the dierent sound variations.
2b. Changing the main/layered sounds: Method 2
It is also possible to change the main/layered sound without pressing and holding buttons.
Press the  or  buttons to move the selection cursor over the main sound or layered sound.
Press the  or  buttons to cycle through the dierent sound variations.
20
hold
Example: To change the main “SK Concert Grand” sound to the “Mellow Grand” sound, press and hold the STRINGS button, then press the PIANO 1 button three times.
buttons:

Change sound variation.
buttons:
Move selection cursor.
× 3
Dual Mode settings
The Dual Mode settings menu allows characteristics of the combined sound to be adjusted.
Dual Mode settings
Dual Mode setting Description Default setting
Balance Adjust the volume balance between the main and layered sounds. 9 - 9
Layer Octave Shift Raise/lower the pitch of the layered sound in octave steps. 0
Dynamics Adjust the dynamic sensitivity of the layered sound relative to the main sound. 10
Entering the Dual Mode settings menu
While the Dual Mode screen is shown in the LCD display:
Press the
The Dual Mode settings menu will be shown in the LCD display.
Adjusting Dual Mode settings
After entering the Dual Mode settings menu:
Press the  or  buttons to move the selection cursor over the desired setting.
Press the  or  buttons to adjust the selected setting.
* To reset the current setting to the default value, press the  and 
buttons simultaneously.
Cycling between Dual, Split, and Four Hands modes
FUNCTION button (EDIT).
* Preferred Dual Mode settings can be stored to a Registration memory
for convenient recall, or to the Startup Setting memory for automatic selection when the instrument is turned on. Please refer to pages 35 and 79 for more information.
buttons:

Adjust selected setting.
buttons:

Move selection cursor.
When Dual Mode is selected, press the FUNCTION button to cycle between Split, Four Hands, and Dual modes.
Exiting Dual, Split, and Four Hands modes
Press the FUNCTION button (EXIT) to exit Dual, Split, and Four Hands modes.
21
Split ModeSplit Mode

Split Mode

The Split Mode function divides the keyboard into two sections, allowing each section to be played with a dierent
sound. For example, a bass sound in the lower section, and a piano sound in the upper section.
1. Entering Split mode
After entering Dual Mode (page 20):
Press the
The Split Mode screen will be shown in the LCD display.
* The default split point is set between keys B3 and C4.
The upper section and lower section sound names will be shown in the LCD display. The LED indicator for the upper section sound button will turn on, and the LED indicator for the lower section sound button will start to ash.
* By default, the lower section will be set to the “Wood Bass” sound.
FUNCTION button (SPLIT).
Upper section sound
Lower
section
sound
2a. Changing the upper/lower section sounds: Method 1
To select a dierent sound for the upper section:
Press the desired SOUND button.
To select a dierent sound for the lower section:
Press and hold the desired SOUND button.
LED indicator on:
Upper section sound.
LED indicator ashing:
Lower section sound.
FUNCTION button (4HAND), then press the
× 2
Example: To select the “Blues Organ” sound for the upper section, press the ORGAN button twice.
* Preferred Split Mode upper/lower section sound combinations can
be stored to a Registration memory for convenient recall. Please refer to page 35 for more information.
2b. Changing the upper/lower section sounds: Method 2
It is also possible to change the upper/lower section sound without pressing and holding buttons.
Press the  or  buttons to move the selection cursor over the upper section or lower section sound.
Press the  or  buttons to cycle through the dierent sound variations.
22
hold
Example: To select the “W. Bass & Ride” sound for the lower section, press and hold the 1 FUNCTION button, then press the BASS button three times.
buttons:

Change sound variation.
buttons:
Move selection cursor.
× 3
3. Changing the split point
Press and hold the FUNCTION button (4HAND), then press the desired split key on the keyboard.
The name of the pressed key will briey be shown in the LCD display, and will become the new split point.
Upper sectionLower section
hold
New split point
Split Mode settings
The Split Mode settings menu allows characteristics of the Split Mode sound and operation to be adjusted.
Split Mode settings
Split Mode setting Description Default setting
Balance Adjust the volume balance between the upper and lower sections. 9 - 9
Lower Octave Shift Raise/lower the pitch of the lower section sound in octave steps. 0
Lower Pedal Enable/disable the sustain pedal for the lower section sound. O
Split Point Specify the point along the keyboard that divides the upper and lower sections. C4
Entering the Split Mode settings menu
While the Split Mode screen is shown in the LCD display:
Press the
FUNCTION button (EDIT).
The Split Mode settings menu will be shown in the LCD display.
Adjusting Split Mode settings
After entering the Split Mode settings menu:
Press the  or  buttons to move the selection cursor over the desired setting.
Press the  or  buttons to adjust the selected setting.
* To reset the current setting to the default value, press the  and 
buttons simultaneously.
* Preferred Split Mode settings can be stored to a Registration memory
for convenient recall, or to the Startup Setting memory for automatic selection when the instrument is turned on. Please refer to pages 35 and 79 for more information.
buttons:

Adjust selected setting.
buttons:
Move selection cursor.
23
Four Hands ModeFour Hands Mode

Four Hands Mode

The Four Hands Mode function divides the keyboard into two sections in a similar way to that of the Split Mode
function. However, with Four Hands Mode enabled, the octave/pitch of each section is automatically adjusted to
create two separate 44-key instruments with the same playing range. Furthermore, the sustain (right) pedal and
soft (left) pedal act as separate sustain pedals for the respective upper and lower sections, allowing two people to
perform piano duets using a single instrument.
1. Entering Four Hands mode
After entering Dual Mode (page 20):
Press the then press the Four Hands Mode.
* The default four hands mode split point is set bet ween keys E4 and F4.
The Four Hands Mode screen and right/left section sound names will be shown in the LCD display.
FUNCTION button (SPLIT) once to enter Split Mode,
FUNCTION button (4HAND) again to select
Right section sound
section
sound
Left
* By default, the right and left sections will both be set to the “SK
Concert Grand” sound.
2a. Changing the right/left section sounds: Method 1
To select a dierent sound for the right section:
Press the desired SOUND button.
To select a dierent sound for the left section:
Press and hold the desired SOUND button.
FUNCTION button (DUAL), then press the
Example: To select the “Classic E.Piano” sound for the right section, press the E.PIANO button.
* Preferred Four Hands Mode right/left section sound combinations
can be stored to a Registration memory for convenient recall. Please refer to page 35 for more information.
2b. Changing the right/left section sounds: Method 2
It is also possible to change the right/left section sound without pressing and holding buttons.
Press the  or  buttons to move the selection cursor over the right section or left section sound.
Press the  or  buttons to cycle through the dierent sound variations.
24
hold
Example: To select the “Upright Piano” sound for the left section, press and hold the 1 FUNCTION button, then press the PIANO2 button.
buttons:

Change sound variation.
buttons:
Move selection cursor.
3. Changing the Four Hands mode split point
Press and hold the FUNCTION button (DUAL), then press the desired split key on the keyboard.
The name of the pressed key will briey be shown in the LCD display, and will become the new split point.
Right sectionLeft section
hold
New split point
Four Hands Mode settings
The Four Hands Mode settings menu allows characteristics of the Four Hands Mode sound to be adjusted.
Four Hands Mode settings
Four Hands Mode setting Description Default setting
Balance Adjust the volume balance between the upper and lower sections. 9 - 9
Right Octave Shift Raise/lower the pitch of the right section sound in octave steps. – 2
Left Octave Shift Raise/lower the pitch of the left section sound in octave steps. + 2
Split Point Specify the point along the keyboard that divides the right and left sections. F4
Entering the Four Hands Mode settings menu
While the Four Hands Mode screen is shown in the LCD display:
Press the
FUNCTION button (EDIT).
The Four Hands Mode settings menu will be shown in the LCD display.
Adjusting Four Hands Mode settings
After entering the Four Hands Mode settings menu:
Press the  or  buttons to move the selection cursor over the desired setting.
Press the  or  buttons to adjust the selected setting.
* To reset the current setting to the default value, press the  and 
buttons simultaneously.
* Changes made to the Four Hands Mode settings will not aect the
Split Mode settings, and vice versa.
* Preferred Four Hands Mode settings can be stored to a Registration
memory for convenient recall, or to the Startup Setting memory for automatic selection when the instrument is turned on. Please refer to pages 35 and 79 for more information.
buttons:

Adjust selected setting.
buttons:
Move selection cursor.
25
ReverbReverb

Reverb

Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert
hall. Some sound types, such as acoustic piano, enable reverb automatically in order to improve acoustic realism.
The DG30 digital piano features six dierent reverb types.
Reverb types
Reverb type Description
Room Simulates the ambiance of a small rehearsal room.
Lounge Simulates the ambience of piano lounge.
Small Hall Simulates the ambiance of a small hall.
Concert Hall Simulates the ambiance of a concert hall or theater.
Live Hall Simulates the ambiance of a live hall or stage.
Cathedral Simulates the ambiance of a large cathedral.
1. Turning Reverb on/o
Press the REVERB button to turn reverb on/o.
The LED indicator for the REVERB button will turn on to indicate when reverb is in use, and the current status will briey be shown in the LCD display.
Reverb
Reverb type
status
Reverb settings
The Reverb settings menu allows the type and characteristics of the reverb to be adjusted.
Reverb settings
Reverb setting Description Range
Typ e Changes the type of environment. –
Depth Adjusts the depth of the environment (i.e. amount of reverberation to apply). 1~10
Time Adjusts the decay length/speed of the reverberation. 1~10
26
Entering the Reverb settings menu
Press and hold the REVERB button.
The Reverb settings menu will be shown in the LCD display.
Adjusting Reverb settings
hold
After entering the Reverb settings menu:
Press the  or  buttons to move the selection cursor over the desired setting.
Press the  or  buttons to adjust the selected setting.
* To reset the current setting to the default value, press the  and 
buttons simultaneously.
Exiting the Reverb settings menu
Press the FUNCTION button (EXIT) to exit the Reverb settings menu.
* Reverb settings are independent for each sound variation.
* Any changes made to the reverb type, settings, or on/o status will
remain until the power is turned o.
* Preferred reverb settings can be stored to a Registration memory for
convenient recall, or to the Startup Setting memory for automatic selection when the instrument is turned on. Please refer to pages 35 and 79 for more information.
buttons:

Adjust selected setting.
buttons:
Move selection cursor.
27
EectsEects
Eects
In addition to reverb, various other eects can be applied to the selected sound, altering the tonal character
and feeling of the instrument. As with reverb, some sound types enable certain eects automatically in order to
enhance tonal quality. The DG30 digital piano features 19 dierent eect types, with 2 combination eects, and 3
additional amplied eects.
Eect types
Eect type Description
Mono Delay Applies an echo eect to the sound, playing through both speakers simultaneously.
Ping Delay Applies a “ping pong” echo eect to the sound, giving the impression that it is “bouncing” from left to right.
Triple Delay Similar in principle to Ping Delay, but with an additional centre echo.
Chorus Layers a slightly detuned version of the sound over the original, thus enriching its tonal character.
Classic Chorus Similar in principle to Chorus, but intended for vintage electric piano sounds.
Ensemble Applies a three-phase chorus to the sound, providing additional richness.
Tremolo Continuously varies the volume at a constant speed, adding a vibrato type eect to the sound.
Classic Tremolo Similar in principle to Tremolo, but intended for vintage electric piano sounds.
Vibrato Tremolo Similar in principle to Tremolo, but with an additional Vibrato eect applied.
Auto Pan Alternates the sound output from left to right across the stereo eld using a sine wave.
Classic Auto Pan Similar in principle to Auto Pan, but intended for vintage electric piano sounds.
Phaser Applies a cyclic phase change to the sound, giving the impression that the sound is moving.
Classic Phaser Similar in principle to Phaser, but intended for vintage electric piano sounds.
Simulates the sound of a rotary speaker commonly used with vintage electronic organs.
Rotary (1~ 6)
Combination Eects
Amplied Eects
There are three dierent levels of overdrive, with and without a Chorus eect.
* The soft pedal can be used to alternate the speed of the rotary simulation between “Slow” and “Fast” eect modes.
Dierent combinations of the above eects, applied simultaneously.
* Combination eect types: Phaser+Chorus, Phaser+AutoPan
A selection of the above eects, with a vintage electric piano speaker eect applied.
* Amplied eect types: Tremolo+Amp, Auto Pan+Amp, Phaser+Amp
1. Turning Eects on/o
Press the EFFECTS button to turn eects on/o.
The LED indicator for the EFFECTS button will turn on to indicate when eects are in use, and the current status will briey be shown in the LCD display.
Eect
Eect type
Eects settings
Eect type Eect setting Description
Mono Delay / Ping Delay / Triple Delay Dry / Wet Adjust the intensity of the delay.
Chorus / Ensemble Dry / Wet Adjust the intensity of the chorus.
status
* If a drum kit sound is selected, the Eects Edit screen will not be
shown.
Time Adjust the interval of time between each delay.
Speed Adjust the speed of the chorus.
28
Eects settings (cont.)
Eect type Eect setting Description
Classic Chorus Mono / Stereo Toggle between a Mono or Stereo eect.
Speed Adjust the speed of the chorus.
Tremolo / Classic Tremolo / Vibrato Tremolo Dry / Wet Adjust the intensity of the tremolo.
Speed Adjust the speed of the tremolo.
Auto Pan / Classic Auto Pan Dry / Wet Adjust the intensity of the pan.
Speed Adjust the speed of the pan.
Phaser / Classic Phaser Dry / Wet Adjust the intensity of the phaser.
Speed Adjust the speed of the phaser.
Rotary Accel. Speed Adjust the acceleration speed between slow and fast modes.
Rotary Speed Adjust the speed of the rotary speaker.
Combination Eects / Amplied Eects Dry / Wet Adjust the intensity of the eects.
Speed Adjust the speed of the eects.
Entering the Eects settings menu
Press and hold the EFFECTS button.
The Eects settings menu will be shown in the LCD display.
Adjusting Eects settings
After entering the Eects settings menu:
Press the  or  buttons to move the selection cursor over the desired setting.
Press the  or  buttons to adjust the selected setting.
* To reset the current setting to the default value, press the  and 
buttons simultaneously.
Exiting the Eects settings menu
Press the FUNCTION button (EXIT) to exit the Eects settings menu.
* Eects settings are independent for each sound variation.
* Any changes made to the eects type, settings, or on/o status will
remain until the power is turned o.
* Preferred eects settings can be stored to a Registration memory for
convenient recall, or to the Startup Setting memory for automatic selection when the instrument is turned on. Please refer to pages 35 and 79 for more information.
hold
* If a drum kit sound is selected, the Eects Edit screen will not be
shown.
buttons:

Adjust selected setting.
buttons:
Move selection cursor.
29
Virtual TechnicianVirtual Technician

Virtual Technician

In addition to the reverb and eects functions, the overall character of the DG30 acoustic piano sounds can also be
dramatically adjusted using the instrument’s Virtual Technician feature. There are two methods of using the Virtual
Technician: Smart Mode and Advanced Mode.
1

Smart Mode

In Smart Mode, the Virtual Technician intelligently performs a collection of adjustments for the player, based on
ten preset attributes such as “Soft” or “Strong”, “Brilliant” or “Dark”. This mode is recommended for musicians that
wish to enjoy dierent piano characteristics, without delving into the individual parameters of Advanced Mode.
1. Entering Virtual Technician Smart Mode
While the normal playing mode screen is shown in the LCD display:
Press the
The Virtual Technician menu will be shown in the LCD display, and Smart Mode will be selected automatically.
Press the FUNCTION button (EDIT).
The list of Smart Mode presets will be shown in the LCD display.
FUNCTION button (VT).
2. Selecting the Virtual Technician preset
While the Smart Mode presets screen is shown in the LCD display:
Press the  or  buttons to selec t the desired Virtual Technician Smart Mode preset.
* Smart Mode will be disabled by default (“O” preset). When disabled,
the Advanced Mode Virtual Technician parameter settings will used.
buttons:

Select Virtual Technician preset
The Virtual Technician adjustments will be applied to the selected sound immediately.
30
* Smart Mode presets are independent for each sound variation.
* The selected Smart Mode preset will be used for the current sound
variation until the power is turned o. However, it is possible to store a Smart Mode preset to a sound. For more information, please refer to the instructions on the following page.
Loading...
+ 122 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use