
Manufacturing Start Date 2016/3
Date of issue :22/10(October)/2016
Copyright C 2016 Kawai Musical Instruments Mfg.Co., Ltd. Allrights reserved
Kawai Musical Instruments

Contents P02
Specifications P03
Assembly Parts
P10
Parts
Top Board Assy Parts P11
Top Board Parts P12
Music Rack Parts / Upper Panel Parts P13
Back Baffle Board Assy / Back Baffle Board Parts
P14
Back Borad Parts P15
Key Cover Parts P16
P18
Jack Panel Parts P19
Cheek Block (L) Parts P20
Cheek Block (R) Parts P21
Key Bed Assy Parts / HP Box Parts
P24
Key Slip Parts / Key Bed Parts P25
Stand Assy Parts P26
End Panel (L) / (R) Parts P27
Pedal Board Parts P28
WR88 Typekeyboard
Hammer Arrangement / Exchange Hammer
P30
Key Height Adjsutment / Key Stroke Adjsutment P31
Electric Parts List / Block Diagram P32
Cable Wiring Specification 1of 2 P33
Cable Wiring Specification 2of 2 P34
Software P35

Songs from Alfred, Burgmüller, Czerny, Beyer, Bach, and Chopin lesson books ². Finger
Exercises
10~400 bpm (20~800 bpm for eighth note rhythms)
Light+, Light, Normal, Heavy, Heavy+, Off (Constant), User Touch Curve
Dry/Wet, Time, Speed, Mono/Stereo, Accel./Rotary Speed – Parameters dependent on effect.
Mono Delay, Ping Delay, Triple Delay, Chorus, Classic Chorus, Ensemble, Tremolo, Classic
Tremolo, Vibrato Tremolo, Tremolo+Amp, Auto Pan, Classic Auto Pan, Auto Pan+Amp,
Phaser+Auto Pan, Phaser, Classic Phaser, Phaser+Amp, Phaser+Chorus, Rotary (1~6)
Reverb Depth, Reverb Time
Room, Lounge, Small Hall, Concert Hall, Live Hall, Cathedral
Dual Mode, Split Mode, Four Hands Mode (Volume/Balance adjustable)
Hammer Delay, Minimum Touch, User Key Volume, Half-Pedal Adjust, Soft Pedal Depth
Equal, Pure Major, Pure Minor, Pythagorean, Meantone, Werckmeister, Kirnberger, User
Temperament, Temperament Key, Stretch Tuning, User Tuning
Damper Resonance, Damper Noise, String Resonance, Undamped String Resonance, Cabinet
Resonance, Key-off Effect, Fall-back Noise, Topboard Simulation, Decay Time
Normal, Mellow 1, Mellow 2 , Dynamic, Bright 1, Bright 2, User Voicing
Harmonic Imaging™ XL (HI-XL), 88-key piano sampling
88 wooden keys with Ivory and Ebony Touch key surfaces
Grand Feel II (GFII) action with Let-Off, Triple Sensor, and Counterweights
Dimensions
(Not including music rack)
45 W x 2 + 45 W transducer
1510 (W) x 542 (D) x 1049 (H) mm
60” (W) x 211/3” (D) x 411/3” (H)
7 cm x 4 (top speakers)
1.4 cm x 2 (dome tweeters) Soundboard
Speaker System
LINE IN (1/8” STEREO), LINE IN Level, LINE OUT (1/4” L/MONO, R), LINE OUT Level, Headphones x 2 (1/4”, 1/8”),
MIDI (IN/OUT), USB to Host, USB to Device
Sustain (with half-pedal support), Soft, Sostenuto. Grand Feel Pedal System
128 x 64 pixel LCD with backlight
Key Transpose, Song Transpose, Tone Control (incl. User EQ), Speaker Volume, Line In Level, Wall EQ*, Tuning,
Damper Hold, Split, Four Hands, LCD Contrast, Startup Setting, Factory Reset, SHS Mode, Phones Type, Phones
Volume, Lower Octave Shift, Lower Pedal On/Off, Split Balance, Layer Octave Shift, Layer Dynamics, Dual Balance,
MIDI Channel, Send PGM#, Local Control, Transmit PGM#, Multi-timbral Mode, Channel Mute, Auto Power Off, Audio
Recorder Gain
Resonance,
Noise & Effects:
1/4, 2/4, 3/4, 4/4, 5/4, 3/8, 6/8, 7/8, 9/8, 12/8 + 100 drum rhythms
Load Song, Load Registration All, Load Registration Single, Load Startup Setting, Save Internal
Song, Save SMF Song, Save Registration All, Save Registration Single, Save Startup Setting,
Rename File, Delete File, Format USB, Convert Song to Audio, Overdub Audio
Other Settings &
Functions
10 song, 2 track recorder – approximately 90,000 note memory capacity
1447 (W) x 476 (D) x 956 (H) mm
57” (W) x 183/4” (D) x 373/4” (H)
13 cm x 2 (woofers)
(8 x 12) cm x 2 (top speakers)
5 cm x 2 (tweeters)

P04 Assembly Parts 1 of 7
No.
Qty
①
1
②
1
③
1
④
4
⑤
2
⑥
3
+Pan Washer Double Sems Machine Screw M6*25mm BKC
+Truss Machine Screw M6*20 BKC
+Truss Machine Screw M4*12 BKC

P05 Assembly Parts 2 of 7
+Truss Machine Screw M4*16mm BKC
+Truss Machine Screw M4*16mm BKC

P06 Assembly Parts 3 of 7

P07 Assembly Parts 4 of 7
+Truss Machine Screw M4*16mm BKC
+Truss Self Tapping Screw Type A 4mm*12mm BKC

P08 Assembly Parts 5 of 7
No. Qty
① 1
② 4
③ 1
④ 1
⑤ 4
⑥ 1
⑦ 1
⑧ 6
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
+Binding Taptite Screw S Tite 4mm*8mm WHC or BKC
KEY STOP RAIL GENERAL ASSY
+Truss Self Tapping Screw Type A 4mm*16mm WHC or BKC
+Truss Machine Screw M4*20mm BKC

P09 Assembly Parts 6 of 7
No. Qty
① 1
② 5
③ 6
④ 1
⑤ 1
⑥ 1
⑦ 1
⑧ 8
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
PWB E ASSY. KEP-592(4) [PANEL LOGIC]
PWB E ASSY. KEP-583(1) [HP AMP]
+Binding Taptite Screw B Tite 4mm:8mm WHC or BKC
Extra Low Head Flat Screw 5mm*20mm BKC
+Pan Washer Double Sems Machine Screw M5*25mm BKC

P10 Assembly Parts 7 of 7
No.
Qty
①
1
②
1
③
1
④
4
⑤
4
⑥
1
⑦
3
+Truss Self Tapping Screw Type A 4mm*14mm BKC
KEY BED ASSY. (With Key slip)
+Flat Head Self Tapping Screw Type A 4mm*35mm BKC
STAPLE W=4mm LEG LENGTH=25mm

BACK BAFFLE BOARD GENERAL ASSY
+Truss Self Tapping Screw Type A 4mm*25mm WHC or BKC

No.
Qty
①
1
②
1
③
6
④
1
⑤
1
⑥
4
⑦
1
⑧
1
⑨
5
⑩
5
⑪
1
⑫
1
⑬
2
⑭
4
+Flat Head Self Tapping Screw Type A 3mm*12mm BKC
ARTIFICIAL LEATHER 780*25 BLACK
+Truss Self Tapping Screw Type A 4mm*20mm WHC or BKC
Plain Washer Normal DIA:4 (Outside9)
+Truss Self Tapping Screw Type A 4mm*45mm WHC or BKC
NYLON TUBE 8OUTSIDE (6INSIDE) DIA 18-22LG.
+Truss Self Tapping Screw Type A 4mm*14mm WHC or BKC

No.
Qty
①
1
②
2
③
6
④
1
⑤
1
⑥
3
Upper Panel Parts
No.
Qty
①
1
②
2
③
2
④
6
⑤
6
⑥
1
+Flat Head Self Tapping Screw Type A 3mm*12mm BKC
MUSIC RACK PROP HINGE FELT 1*24*100 ADHESIVE BACKING
DOUBLE FACE TAPE 3M Y-9448H or equivalant 10*60
Plain Washer Normal DIA:4
+Binding Self Tapping Screw Type A 3mm*25mm BKC
KAWAI LOGO SEAL SILVER 17mm*128mm
+Binding Self Tapping Screw Type A 3mm*10mm BKC

P14 Back Baffle Board Assy Parts
No.
Qty
①
1
②
2
③
8
④
4
⑤
8
⑥
2
⑦
4
⑧
2
⑨
2
Back Baffle Board Parts
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
STAPLE W=10mm LEG LENGTH=6mm
+Truss Self Tapping Screw Type A 4mm*14mm WHC or BKC
+Truss Self Tapping Screw Type A 4mm*16mm WHC or BKC
STAPLE W=10mm LEG LENGTH=6mm

No.
Qty
①
1
②
2
③
1
④
1
⑤
1
⑥
1
⑦
1
⑧
1
INSERT NUT TYPE-B M6*10.5mm
NON WOVEN FABRIC (ADHESIVE BACKING) HN604B t0.25*8*1298
KEY STOP FELT 1*10*1250 BLACK
DOUBLE FACE TAPE 3M Y-9448H or equivalant 10*1250

No.
Qty
①
1
②
4
③
1
④
1
⑤
2
⑥
2
⑦
4
⑧
7
⑨
1
⑩
1
⑪
5
⑫
1
⑬
3
⑭
6
⑮
2
⑯
2
+Pan Waher Double Sems Machine Screw M3*6 WHC or BKC
+Binding Self Tapping Screw Type A 3mm*8mm WHC or BKC
DOUBLE FACE TAPE 3M Y-9448H or equivalent 10*210
KEY COVER BACK OVERLAY FR500 t0.43*12*1345
KEY COVER END METAL FITTING
+Truss Self Tapping Screw Type A 4mm*10mm WHC or BKC
+Binding Taptite Screw S Tite 3mm*8mm WHC or BKC
+Pan Waher Double Sems Machine Screw M3*8 WHC or BKC

No.
Qty
①
1
②
1
③
1
④
2
⑤
1
⑥
1
⑦
31
No.
Qty
①
2
②
2
③
10
④
1
⑤
2
SERRATED FLANGE HEX LOCK NUT M4 WHC or BKC
TRANSFORMER KT-035 WITH BUSH AND METAL TUBE
+Truss Self Tapping Screw Type A 4mm*14mm WHC or BKC
PWB M ASSY KEP-669(1) [Power AMP]
PWB M ASSY KEP-585(4) [Power]
PWB M ASSY KEP-573(5) [INLET] 110-120V
'PWB M ASSY KEP-573(6) [INLET] 220-240V
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
PWB M ASSY KEP-493(5) [CPU] for CD,CG,GE
'PWB M ASSY KEP-493(5) [CPU] for AU
'PWB M ASSY KEP-493(5) [CPU] for US
PWB M ASSY KEP-588(4) [PEDAL]
PWB M ASSY KEP-591(4) [NW]

No.
Qty
①
1
②
10
③
2
④
12
⑤
2
⑥
4
⑦
4
⑧
2
⑨
6
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
TWIST NECK MACHINE SCREW M4*30 BKC
+Truss Self Tapping Screw Type A 4mm*12mm BKC

No.
Qty
①
1
②
2
③
1
④
1
⑤
4
⑥
4
⑦
3
⑧
2
⑨
2
PWB E ASSY. KEP-586(3) [JACK]
PWB E ASSY. KEP-502(3) [MIDI-USB]
+Binding Taptite Screw S Tite 3mm*8mm WHC or BKC
NON WOVEN FABRIC HN611B adhesive backing t0.55*10*49
+Binding Taptite Screw S Tite 3mm*8mm BKC
+Binding Taptite Screw P Tite 3mm*10mm BKC

P20 Cheek Block (L) Parts
No.
Qty
①
1
②
1
③ 1
④
2
⑤ KEY TOP with lens Black2 (DCRE-0003)
17
⑥ KEY TOP no lens Gray4 (DCRE-0009) RIGHT
2
⑦ KEY TOP no lens Gray4 (DCRE-0009) UP
2
⑧ CHEEK BLOCK CUSHION
1
⑨ 1
⑩
10
⑪ CHEEK BLOCK FITTING
1
⑫ CHEEK BLOCK FITTING
1
⑬ FILAMENT TAPE 3M #898 12*50
1
⑭
3
⑮
1
PWB E ASSY KEP-593(4) [PANEL]
PWB E ASSY KEP-584(1) [LCD HOLD]
LCD CUSHION 1*4*71.5 ADHESIVE BACKING
+Binding Taptite Screw P Tite 3mm*10mm WHC or BKC
+Binding Taptite Screw P Tite 3mm*6mm WHC or BKC

P21 Cheek Block (R) Parts
No.
Qty
①
1
②
1
③
6
④
1
⑤
2
⑥
2
⑦
1
⑧
1
⑨
1
⑩
2
⑪
1
⑫
1
POWER SW KNOB (DCRE-0001-Black1)
FILAMENT TAPE 3M #989 12*30
SLIDE VOL. KNOB Black1/Ivory1(LINE)
+Binding Taptite Screw P Tite 3mm*10mm WHC or BKC
POWER CABLE ASSY with CAPACITOR
PLAIN WASHER (NORMAL) DIA:3
+Binding Taptite Screw P Tite 3mm*14mm WHC or BKC
CHEEK BLOCK FITTING (FRONT)
CHEEK BLOCK FITTING (BAKC)
NON WOVEN FABRIC (ADHESIVE BACKING) HN611B t0.55*10*49
PWB E ASSY KEP-589(4) [VOL]

No.
Qty
①
1
②
1
③
1
④
8
⑤
3
⑥
2
⑦
4
⑧
6
⑨
2
⑩
2
⑪
4
+Binding Self Tapping Screw Type A 3mm*12mm WHC or BKC
NON WOVEN FABRIC (ADHESIVE BACKING) HN611B t0.55*10*49
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
PLAIN WASHER (NORMAL) DIA:6
+Truss Self Tapping Screw Type A 4mm*10mm WHC or BKC
KEY STOP RAIL FELT Black 1*8*1250 with adhesive tape
+Truss Self Tapping Screw Type A 4mm*25mm WHC or BKC

No.
Qty
①
1
②
1
③
7
④
8
⑤
16
⑥
2
⑦
4
⑧
1
⑨
1
⑩
1
⑪
6
HP Box Parts
No.
Qty
①
1
②
1
③
1
④
1
⑤
1
PWB E ASSY. KEP-587(4) [HP]
+Binding Taptite Screw P Tite 3mm*6mm WHC or BKC
PLAIN WASHER (VOLUME) NOMINAL DIA:12 BKC
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
+Truss Self Tapping Screw Type A 4mm*14mm BKC
+Truss Self Tapping Screw Type A 4mm*12mm BKC
STAPLE W=4mm LEG LENGTH=25mm

No.
Qty
①
1
②
3
③
1
④
1
⑤
3
⑥
1
⑦
2
⑧
1
⑨
1
⑩
8
⑪
2
⑫
2
⑬
2
⑭
1
⑮
1
⑯
3
DOWEL 6 DIA. 30LG. BEECH or equivalent
+Truss Self Tapping Screw Type A 4mm*25mm WHC or BKC
+BINDING MACHINE SCREW 4mm*20mm BKC
KEY COVER GUIDE (L)
KEY COVER GUIDE (R)
+Flat Head Self Tapping Screw Type A 3mm*12mm BKC
CLOTH FELT 1*20*20 with Adhesive BLACK
+Truss Self Tapping Screw Type A 4mm*12mm WHC or BKC
INSERT NUT TYPE-B M4*9.5mm
KEY COVER RACK (L)
KEY COVER RACK (R)

No.
Qty
①
1
②
4
③
1
④
1
Key Bed Parts
No.
Qty
①
1
②
6
③
10
④
10
⑤
4
⑥
8
⑦
2
⑧
1
⑨
2
INSERT NUT TYPE-B M6*10.5mm
STAPLE W=10mm LEG LENGTH=6mm
+Truss Self Tapping Screw Type A 4mm*12mm BKC
DOWEL 6 DIA. 30LG. BEECH or equivalent
PWB M ASSY KEP-590(4) [PILOT LAMP]
+Binding Self Tapping Screw Type A 3mm*10mm WHC or BKC

No.
Qty
①
1
②
1
③
1
④
1
⑤
4
⑥
4
⑦
4
+Truss Self Tapping Screw Type A 4mm*16mm WHC
+Truss Self Tapping Screw Type A 4mm*20mm BKC
+Truss Self Tapping Screw Type A 4mm*30mm BKC

No.
Qty
①
1
②
1
③
1
④
1
⑤
1
⑥
2
⑦
2
⑧
1
⑨
5
⑩
1
⑪
1
⑫
1
⑬
4
⑭
8
⑮
1
⑯
1
⑰
1
⑱
1
⑲
1
⑳
1
㉑
2
㉒
4
+Truss Self Tapping Screw Type A 4mm*20mm BKC
DOWEL 8 DIA 30 LG BEECH or equivalent
TOE BLOCK (L)
TOE BLOCK (R)
PLAIN WASHER (SMALL) NORMAL DIA:6 or 8
SPRING LOCK WASHER NORMAL DIA:6
+Truss Self Tapping Screw Type A 4mm*35mm BKC
END PANEL (L)
END PANEL (R)
NON WOVEN FABRIC (ADHESIVE BACKING) HN611B t0.55*10*49
FELT 1*5*550 Black/Adhesive backing L 180
+KNOCK DOWN SCREW 5mm*15mm Uni-Chromating
+Truss Self Tapping Screw Type A 4mm*16mm BKC
+Truss Self Tapping Screw Type A 4mm*14mm BKC
+Flat Head Self Tapping Screw TypeA 4mm*35mm BKC
+Truss Self Tapping Screw Type A 6mm*50mm BKC

No.
Qty
①
1
②
3
③
1
④
1
⑤
1
⑥
8
⑦
3
⑧
3
⑨
2
⑩
2
+Truss Self Tapping Screw Type A 4mm*25mm WHC or BKC
+Truss Self Tapping Screw Type A 4mm*16mm WHC
PEDAL FELT t=1*9*100/Adhesive backing BLACK
STAPLE W=10mm LEG LENGTH=mm
PEDAL ADJUSTER BOLT M8*15

No.
Qty
①
1
②
2
③
1
④
2
BALANCE PUNCHING
88
(20)
(20)
(20)
15
17
31
25
⑦
1
⑧
1
6
1
1
1
⑩
5
⑪
1
-
-
⑬
-
⑭
-
SILICONE OIL SH200 TORAY DOW CORNING
SILICONE OIL SH200 TSF451-350 MONTATIVE PAFORMANCE MATEIALS JAPAN
SLIDE GREASE G-524 KANTO KASEI
TORGUE GREASE TKH-65 KANTO KASEI
HAMMER UPPER-LIMIT CUSHION
BALANCE PAPER PUNCHING No.9 t0.26*φ12.5
Use For key height adjust
BALANCE PAPER PUNCHING No.10 t0.12*φ12.5
Use For key height adjust
BALANCE PAPER PUNCHING No.11 t0.07*φ12.5
Use For key height adjust

274760
W/B1: 15pcs Key No.1-15 (C0-B1)
274761
W/B2: 17pcs Key No.16-32 (C2-E3)
274762
W/B3: 31pcs Key No.33-63 (F3-B4)
274763
W/B4: 25pcs Key No.64-88 (C5-C7)
Exchange Hammers
1. Remove Keys before exchange the Hammers
2. Turn down the Hammers 3. Drop the Hammers 4. Push up the Hammers in the axis
at the angle as show in the figure at the same angle of No.3 procedure
Keyboard Grease Up
1. Remove Hammer before Grease up
2. Grease up to the illustrated position
* Don't apply or attach grease to circled area

P31 Key Height Adjustment
Lift the keys and insert or remove paper balance punching.
[Key Height Standard]
White key : 77 +1/-0.5mm
Black key : 86 +1/-0.5mm
Key Stroke Adjustment
1. Press down a key with 200g weight.
2. Confirm whether the hammer touches the stopper cushion.
3. If it doesn't touch, adjust capstan by turning it left by spanner.
4.
Check full stroke of white / black keys.
[Full Stroke Standard]
White key : 10 +/-0.6mm Black key : 9 +/-0.6mm
5.
If full stroke is bigger than standard, adjust capstan by turning it left by spanner.
If full stroke is smaller than standard, adjust capstan by turning it right by spanner.
*. Please be careful so grease does not adhere to capstan.

P32 Electrical Parts List
No. Qty
1 1
1
1
2 1
1
3 1
4 1
5 1
6 1
7 1
8 1
9 1
10 1
11 1
12 1
13 1
14 2
15 1
16 1
17 1
18 2
19 2
20 2
21 1
22 2
23 1
24 2
25 1
26 1
27 1
28 1
29 1
30 1
31 1
Block Diagram

P33 Cable Wiring Specification 1 of 2
No. Parts Code
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

P34 Cable Wiring Specification 2 of 2

How to rewrite the Flash ROM program by USB Memory.
1. Copy 「CS8_060.SYS」to root folder of USB Memory from SYS folder of CD-R.
(Don't copy other .SYS files to same USB memory.)
2. Insert USB Memory to 「USB to device」 jack of CS8.
3. Power on CS8 while holding [1],[2],[3] buttons.
4. Wait until 「Boot End」 appear on the LCD.
5. For turn off the power press and hold the power SW [5 seconds.]. Then release.
How to change the destination.
1) Changing for CD,GE market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「PIANO1] button.
2) Changing for US market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「PIANO2] button.
3) Changing for CG,AU market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「E.PIANO] button.
4)
Changing for Japanese market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「ORGAN] button.
How to identify the destination.
Power ON while holding [VOCAL&PAD],[REGISTRATION] button.
Display is 「EU」 for CD,GE or CG , 「US」 for US , 「AU」 for AU , 「JP」 for Japan market.
How to display the checksum.
Power on CS8 while holding [ORGAN],[HARPSI&MALLETS],[STRINGS] buttons.