Page 1
CN25 MIDI Settings Manual
MIDI Settings
The term MIDI is an acronym for Musical Instrument Digital Interface, an international standard for connecting
musical instruments, computers, and other devices to allow the exchange of performance data.
MIDI terminals
MIDI terminal Function
MIDI IN Receiving note, program change, and other data.
MIDI OUT Sending note, program change, and other data.
MIDI channels
MIDI uses channels to exchange data back and forth between MIDI devices. There are receive (MIDI IN) and transmit (MIDI OUT)
channels. Most musical instruments or devices with MIDI functions are equipped with both MIDI IN and OUT jacks and are
capable of transmitting and receiving data via MIDI. The receive channels are used to receive data from another MIDI device and
the transmit channels are used to transmit data to another MIDI device.
The illustration below shows three musical instruments, connected together using MIDI.
Transmitting instrument a Receiving instrument b Receiving instrument c
Transmitting instrument a sends transmit channel and keyboard information to receiving instruments b/c.
The information arrives at the receiving instruments b/c.
Receiving instruments b/c will respond to MIDI data that is sent if their receive channel is the same as the transmit channel of
the transmitting instrument a.
If the channels do not match, then the receiving instruments b/c will not respond to any data that is sent.
For both receiving and transmitting, channels 1 - 16 can be used.
Recording/playing with a sequencer
When connected to a sequencer, the CN25 digital piano can
be used to record and playback multi-track songs, with
separate sounds playing simultaneously on each channel.
Sequencer
1
Page 2
CN25 MIDI Settings Manual
MIDI Settings
MIDI functions
The CN25 digital piano supports the following MIDI functions:
Transmit/receive note information
Transmit/receive note information from a MIDI-connected
musical instrument or device.
Transmit/receive channel settings
Specify transmit/receive channels within the range of 1 to 16.
Transmit/receive exclusive data
Transmit/receive front panel or menu function settings as
exclusive data.
Multi-timbral mode setting
Receive multiple channel MIDI data from a MIDI-connected
musical instrument or device.
* Multi-timbral mode setting must be enabled.
MIDI settings
Function name Explanation Default setting
Transmit/receive Program Change number
Transmit/receive program change data to/from a MIDIconnected musical instrument or device.
Transmit/receive pedal data
Transmit/receive sustain, sostenuto, and soft pedal data from
a MIDI-connected musical instrument or device.
Receive volume data
Receive MIDI volume data sent from a MIDI-connected
musical instrument or device.
* Please refer to the ‘MIDI Implementation Chart’ on page 7 for further
information regarding the MIDI capabilities of the CN25 digital piano.
Transmit Program
Change Number
Local Control Specify whether or not internal sounds will be heard when the keyboard is pressed. On
Multi-timbral mode Specify whether or not MIDI information can be received on more than one channel. O
MIDI Channel Specify the channel used to transmit/receive MIDI information. 1ch
Specify whether or not program change information is sent when sounds are changed.
Send a MIDI program change number from 1 to 128.
On
2
Page 3
CN25 MIDI Settings Manual
MIDI Settings
Transmit MIDI Program Change
The Send Program Change Number setting determines whether or not the CN25 digital piano will transmit
program change information when sounds are changes. It is also possible to transmit a program change
number (ranging from 1 to 128) in order to change the sound of an external MIDI device.
Transmit MIDI Program Change settings
Transmit PGM# Explanation
O The instrument will NOT transmit program change numbers when changing sounds.
On
(default) The instrument will transmit program change numbers when changing sounds.
Changing the Transmit MIDI Program Change setting
Press and hold the METRONOME and SOUND SELECT buttons, then press the key assigned to the desired Transmit MIDI Program
Change setting.
Sending a Program Change number
Press and hold the METRONOME and SOUND SELECT buttons, then enter the desired program change number to send using the
number keys.
* Program change numbers are specied as three digits within the range of 001 - 128.
* The program change number will be transmitted automatically when the key for the third digit number is pressed.
Transmit PGM#
Off
On
hold
hold
1 2 3 4 5 6 7 8 9 0
Transmit PGM#
3
Page 4
CN25 MIDI Settings Manual
MIDI Settings
Local Control
The Local Control setting determines whether the instrument will play an internal sound when the keys are
pressed. This setting is useful when using the CN25 digital piano to control an external MIDI device.
Local Control settings
Local Control Explanation
O The instrument will transmit information to an external MIDI device only.
On
(default) The instrument will play an internal sound and transmit information to an external MIDI device.
Changing the Local Control setting
Press and hold the METRONOME and SOUND SELECT buttons, then press the key assigned to the desired Local Control setting.
Local Control
Off
On
hold
hold
4
Page 5
CN25 MIDI Settings Manual
MIDI Settings
Multi-timbral Mode
The Multi-timbral mode setting determines whether or not the CN25 digital piano is able to receive MIDI
information on more than one MIDI channel simultaneously. This allows the instrument to play back multi-
track, multi-timbral performance data sent from an external MIDI device.
Multi-timbre settings
Multi-timbre Explanation
O
(default) Multi-timbral mode disabled
On Multi-timbral mode enabled*
* Please refer to the ‘Program Change Number List’ on page 7.
Changing the Multi-timbral mode setting
Press and hold the METRONOME and SOUND SELECT buttons, then press the key assigned to the desired Multi-timbre setting.
* MIDI data received through channel 10 will not be performed when Multi-timbre is enabled.
hold
hold
Multi-timbral mode
Off
On
Highest key
5
Page 6
CN25 MIDI Settings Manual
MIDI Settings
MIDI Channel (transmit/receive)
The MIDI Channel setting allows the transmit/receive channel to be specied. The selected channel will
function as both the transmit and receive channel (separate transmit/receive channels cannot be specied).
Changing the MIDI Channel setting
Press and hold the METRONOME and SOUND SELECT buttons, then press the key assigned to the desired MIDI channel.
* The MIDI channel can be specied within the range of 1 - 16.
MIDI Channe l
hold
hold
119742 1614
1 3 5 6 8 10 12 13 15
MIDI Channe l
Highest key
6
Page 7
CN25 MIDI Settings Manual
Program Change Number List
Program Change Number List
Sound name
Concert Grand 1 1 121 0
Concert Grand 2 2 1 95 16
Studio Grand 3 1 121 1
Studio Grand 2 4 1 95 17
Mellow Grand 5 1 121 2
Mellow Grand 2 6 1 95 18
Modern Piano 7 2 12 1 0
Rock Piano 8 2 121 1
Classic E.Piano 9 5 121 0
Modern E.Piano 10 6 121 0
Jazz Organ 11 18 121 0
Church Organ 12 20 121 0
Harpsichord 13 7 121 0
Vibraphone 14 12 121 0
String Ensemble 15 49 121 0
Slow Strings 16 45 95 1
Multi-timbral mode O Multi-timbral mode On
Program number Program number Bank MSB Bank LSB
Choir 17 53 121 0
New Age Pad 18 89 12 1 0
Atmosphere 19 100 121 0
7
Page 8
CN25 MIDI Settings Manual
MIDI Implementation Chart
Kawai CN25 digital piano
Function Transmit Receive Remarks
Date : February 2014 Version : 1.0
Basic channel
Mode
Note number
Velocity
After touch
Pitch bend
Control change
At power-up 1 1
Settable 1 - 16 1 - 16
At power-up Mode 3 Mode 1
Message
Alternative
Range
Note on
Note o
Key specic
Channel specic
7
64
66
Î
ввввввввв Î
15 - 113* 0 - 127
ввввввввв
Î Î
Î Î
Î Î
Î
(Right pedal)
(Middle pedal)
Mode 1, 3**
0 - 127
** Omni mode is on at power-up.
Omni mode can be turned o
through MIDI channel setting
operations.
* 15 - 113, including transpose
Volume
Damper pedal
Sostenuto pedal
Program change
settable range
Exclusive
Common
Real time
Other functions
Remarks
67
Song position
Song selection
Tun e
Clock
Commands
Local On / O
All notes O
Active sensing
Reset
(Left pedal)
(0 - 127)
ввввввввв
Î Î
Î Î
Î Î
Î Î
Î Î
Î
Î
Î
Î Î
Soft pedal
(Please refer to the ‘Program
Change Number List’)
[page 7]
Transmission can be selected
Mode 1: omni mode On, Poly Mode 2: omni mode On, Mono
Mode 3: omni mode O, Poly Mode 4: omni mode O, Mono
8
: Yes
: No
Î
KPSZ-0729 R100
Loading...