Kawai CL30 User Manual

DIGITAL PIANO

CL30

OWNER’S MANUAL

Thank you for choosing this Kawai CL30 Digital Piano.
Your new CL30 is a high-quality instrument offering the very latest in leading-edge music technology.
This manual contains valuable information that will help you make full use of your CL30 piano’s
many capabilities. Please read it carefully and keep it handy for further reference.

TABLE OF CONTENTS

Page

Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Assembling The Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Part Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1. Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2. Dual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3. Metronome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

4. Concert Magic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5. Demonstration Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6. Using the Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Function Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

1. Selecting A Touch Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

2. Transpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

3. Tuning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4. Reverb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5. Concert Magic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

6. MIDI Channel Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

7. MIDI Local Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

8. Turning Multi-Timbral Mode On/Off . . . . . . . . . . . . . . . . . . . 26

9. Transmit MIDI Program Change . . . . . . . . . . . . . . . . . . . . . . 27

MIDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Concert Magic Song List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Program Change Number Mapping . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

MIDI Implementation Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

– 2 –

Important Safety Instructions

The chair must be used properly (it must be
used only when playing the product).

● Do not play with it or stand on it.

● Only one person is allowed to sit on it.

● Do not sit on it when opening the lid.

● Re-tighten the bolts occasionally.

Doing so may cause the chair to fall over or your
fingers to be trapped, resulting in injury.

Do not insert or disconnect the power
cord plug with wet hands.

Doing so may cause electric shock.

The product should be connected to
an AC outlet of the specified
voltage.

● If you are going to use an AC power cord,
make sure that its has the correct plug shape
and conforms to the specified power voltage.

● Failure to do so may result in fire.

WARNING

denotes that care should be taken.
The example instructs the user to take care not to allow fingers to be trapped.

denotes a prohibited operation.
The example instructs that disassembly of the product is prohibited.

denotes an operation that should be carried out.
The example instructs the user to remove the power cord plug from the AC outlet.

Examples of Picture Symbols

120V 240V230V

Indicates a potential hazard that could result in death
or serious injury if the product is handled incorrectly.

Read all the instructions before using the product.

WARNING - When using electric products, basic precautions should always be followed,
including the following.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS : RISQUE DE CHOC ELECTRIQUE

- NE PAS OUVRIR.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the leterature accompanying the
product.

WARNING

TO REDUCE THE RISK OF
FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN
OR MOISTURE.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

SAVE THESE INSTRUCTIONS

– 3 –

When using the headphones, do not
listen for long periods of
time at high volume levels.

Doing so may result in hearing problems.

Do not lean against the keyboard.

Do not disassemble, repair or modify
the product.

When disconnecting the AC power cord's
plug, always hold the plug
and pull it to remove it.

The product is not completely disconnected from the
power supply even when the power switch is turned
off. If the product will not be used for a long time,
unplug the AC power cord from the AC outlet.

Doing so may cause the product to fall over,
resulting in injury.

Doing so may result in product breakdown, electric
shock or short-circuit.

● Pulling the AC power cord itself may damage
the cord, causing a fire, electric shock or
short-circuit.

● Failure to do so may cause fire in case of
lightning.

● Failure to do so may over-heat the product,
resulting in fire.

This product may be equipped with a polarized line plug (one blade
wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.

It is a good practice to have the instrument near the AC outlet and the power cord plug in a position
so that it can readily be disconnected in an emergency because electricity is always charging
while the plug is in the AC outlet even in a power switch off conditiion.

Indicates a potential hazard that could result in injury

CAUTION

Do not use the product in the following areas.

● Areas, such as those near windows, where the product is
exposed to direct sunlight

● Extremely hot areas, such as near a heater

● Extremely cold areas, such as outside

● Extremely humid areas

● Areas where a large amount of sand or dust is present

● Areas where the product is exposed to excessive

vibrations

or damage to the product or other

Before connecting cords, make sure
that the power to this product
and other devices is turned
OFF.

Take care not to allow any foreign
matter to enter the product.

Do not drag the product on the floor.
Take care not to drop the product.

Using the product in such areas may result in
product breakdown.
Use the product only in moderate climates (not
in tropical climates).

OFF

Failure to do so may cause breakdown of this
product and other devices.

Entry of water, needles or hair pins may result
in breakdown or short-circuit.
The product shall not be exposed to dripping or
splashing. No objects filled with liquids, such as
vases, shall be placed on the product.

Please lift up the product when moving it.
Please note that the product is heavy and must
be carried by more than two persons.
Dropping the product may result in breakdown.

– 4 –

● Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or injury.

Do not stand on the product or exert
excessive force.

Notes on Repair

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the
power cord plug, and then contact the shop from which the product was purchased.

The product should be serviced by qualified service personnel when:

●

The power supply cord or the plug has been damaged.

●

Objects have fallen, or liquid has been spilled into the product.

●

The product has been exposed to rain.

●

The product does not appear to operate normally or exhibits a marked change in

performance.

●

The product has been dropped, or the enclosure damaged.

CAUTION:

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION:

Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu'au fond.

Instruction for AC power cord (U.K.)

Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.

The product should be located so that its location or position does not interfere with its proper
ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.
Ensure that the ventilation is not impeded by covering the ventilation openings with items,
such as newspaper, table-cloths, curtains, etc.

Do not place naked flame sources, such as lighted candles on the product.

An information on Disposal for users

If your product is marked with this recycling symbol it means that, at the end of its
life, you must dispose of it separately by taking it to an appropriate collection point.
You should not mix it with general household waste. Disposing of this product correctly
will prevent potential negative effects on the environment and human health which
could otherwise arise due to inappropriate waste handling.
For further details, please contact your local authority.
(European Union only)

● Doing so may result in discoloration or deformation
of the product.

● When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.

Do not wipe the product with benzene
or thinner.

Failure to do so may damage them, resulting in
fire, electric shock or short-circuit.

When connecting the AC power cord
and other cords, take care
not to get them tangled.

● Doing so may cause the product to generate
noise.

● If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.

Do not place the product near electrical
appliances such as TVs and
radios.

– 5 –

THANK Y OU FOR PURCHASING A KAWAI DIGITAL PIANO!

The Kawai digital piano is a revolutionary new keyboard instrument that
combines the latest in electronic advances with traditional craftsmanship
inherited from Kawai’s many years of experience in building fine pianos.
Its keyboard provides the touch response and full dynamic range required
for a superb performance on the piano, harpsichord, organ, and other
instruments. In addition, the CL piano is equipped with reverb
and a digital effect processor for an even fuller sound. Industry­Standard MIDI (Musical Instrument Digital Interface) jacks
are included which allow you to play other electronic
instruments at the same time—opening a whole new world of
musical possibilities.

This Owner’s Manual contains valuable information that will help you
make full use of this instrument’s many capabilities. Please read all
sections carefully and keep this manual handy for further reference.

– 6 –

ASSEMBLING THE STAND

READ ME FIRST

Before beginning the assembly of your CL30 read and become familiar with the assembly instructions
that follow. Then, carefully unpack the piano and check your unit against the parts list.

PARTS PROVIDED

Main Unit (A) 1pc. Side Panel (B) 2 pcs.
Back Panel (C) 1 pc. Pedal Board (D) 1pc.
Arm (E) 2 pcs. Music Rack (F) 1pc.
Screw (c) (M6 x 65) 4 pcs. Screw (d) (M6 x 35) 4 pcs.
Screw (e) (M6 x 25) 4pcs. Screw (f) (ø4 x 16) 2 pcs.
Adjuster (G) 1 pc. AC Adapter (H) 1 pc.
Power Cord (I) 1pc. Caps(J) 8pcs.

Headphone Hook 1 pc.
Screw (ø4 x 14) 2pcs.

(D)

(A)

(C)

(F)

Left

(B)

(H)

Left

(E)

Right

Right

(I)

(c)

(d)

(e)

(f)

– 7 –

(J)

(G)

Be sure that all parts are included before starting to assemble your unit.

CAUTION!

Be sure to assemble CL30 by two persons and being care for carrying the Main Unit at level.

1. Insert the adjuster into about 1 cm
on the bottom of the Pedal Board.

2. Undo and pull out the Pedal cord on
the back of the Pedal Board.

Adjuster Hole

(Back of the Pedal board)

Front

3. Place the Side Boards beside the Pedal Board
on the floor with its back sides facing down.
Fix the screws (a) (b) sliding into the metal
fittings on the both sides of the Pedal Board.

Screws( c )
M6 x 65

Back Panel
( C )

Back

Side Panel
( B )

Screws( f )

ø 4 x 16

Pedal Board
( D )

Pedal Board
( D )

Adjuster
( G )

Side Panel
( B )

4. Fasten Side Panel and Back Panel with
two screws(c) tightly.

5. Fasten screws (a) (b) and then screw (f)
tightly.

6. Raise up the assembled Stand.

– 8 –

CAUTION!

Pay attention so that your hands or fingers are not caught between the stand and piano.
Be sure to secure the piano to the stand with the screws. If you fail to do so, the unit could
fall from the stand causing damage or personal injury.
Driving or putting screws too tightly or with too much force may cause damaging the Main
Unit.

Main Unit
( A )

Stand

8. Set the holes on the bottom of the Piano

fitting to holes of the metal fittings on
the Side Panels.

9. Fasten half with screws (e).

10. And then fasten screws (e) securely
after making sure of the holes in place
so that all screws (e) are lined up
and driven straight.

Caps (J )

Hole

Metal fitting

screws ( e )
M6 x 25

7. Place the Piano on the top of
the side boards.

Hole

Metal fitting

– 9 –

Screws ( d )
M6 x 35

Caps ( J )

11. Fasten Arms and the Piano
with screws (d).

12. Put the caps onto the heads
of the screws (c) (d) ( 8pcs ).

CAUTION!

Pay attention for fear that little children swallow the caps.

13. Insert the Music Rack in the slit
on the top of the Piano.

(*3) AC adapter

(*2) Binding

front

(*1) Lock tab or

Side Panel
( Right )

(*4) Binding

Side Panel
( Left )

back

lever of the plug

Pedal Cord

14. Insert the pedal connection cord that comes from Pedal Board into
the Piano’s Pedal jack. When viewed from the back, insert the plug
with the Lock tab or lever (*1) of the plug on front.

15. Fix the pedal cord with binding on the left Side Board. (*2)

16. Connect the AC adapter and the power cord tightly.

17. Insert the plug of AC adapter into the Piano’s soket. (*3)

18. Fix the cord of AC adapter with binding on the right Side Board. (*4)

– 10 –