Thank you for choosing this Kawai CL20 Digital Piano.
Your new CL20 is a high-quality instrument offering the very latest in leading-edge music technology.
This manual contains valuable information that will help you make full use of your CL20 piano’s
many capabilities. Please read it carefully and keep it handy for further reference.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
WARNING
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR.
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lighting flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
Examples of Picture Symbols
denotes that care should be taken.
The example instructs the user to take care not to allow fingers to be trapped.
denotes a prohibited operation.
The example instructs that disassembly of the product is prohibited.
denotes an operation that should be carried out.
The example instructs the user to remove the power cord plug from the AC outlet.
TO REDUCE THE RISK OF
FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE
THIS PRODUCT TO RAIN
OR MOISTURE.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the leterature
accompanying the product.
Read all the instructions before using the product.
WARNING - When using electric products, basic precautions should always be followed,
including the following.
WARNING
The product should be connected to
an AC outlet of the specified
voltage.
Do not insert or disconnect the power
cord plug with wet hands.
When using the headphones, do not
listen for long periods of
time at high volume levels.
Indicates a potential hazard that could result in death
or serious injury if the product is handled incorrectly.
● Use the AC adapter supplied with the product
120V240V230V
or one recommended by Kawai.
● If you are going to use an AC power cord,
make sure that its has the correct plug shape
and conforms to the specified power voltage.
● Failure to do so may result in fire.
Doing so may cause electric shock.
Doing so may result in hearing problems.
– 3 –
Do not disassemble, repair or modify
the product.
Doing so may result in product breakdown, electric
shock or short-circuit.
When disconnecting the AC power cord's
● Pulling the AC power cord itself may damage
plug, always hold the plug
and pull it to remove it.
The product is not completely disconnected from the
power supply even when the power switch is turned
off. If the product will not be used for a long time,
● Failure to do so may cause fire in case of
● Failure to do so may over-heat the product,
unplug the AC power cord from the AC outlet.
This product may be equipped with a polarized line plug (one blade
wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.
Indicates a potential hazard that could result in injury
CAUTION
Do not use the product in the following areas.
● Areas, such as those near windows, where the product is
exposed to direct sunlight
● Extremely hot areas, such as near a heater
● Extremely cold areas, such as outside
● Extremely humid areas
● Areas where a large amount of sand or dust is present
● Areas where the product is exposed to excessive
vibrations
or damage to the product or other
Using the product in such areas may result in
product breakdown.
Use the product only in moderate climates (not
in tropical climates).
the cord, causing a fire, electric shock or
short-circuit.
lightning.
resulting in fire.
Before connecting cords, make sure
that the power to this product
and other devices is turned
OFF.
Take care not to allow any foreign
matter to enter the product.
Do not drag the product on the floor.
Take care not to drop the product.
Do not place the product near electrical
appliances such as TVs and
radios.
When connecting the AC power cord
and other cords, take care
not to get them tangled.
Do not wipe the product with benzene
or thinner.
OFF
Failure to do so may cause breakdown of this
product and other devices. El producto debe ser
protegido del agua y de las salpicaduras. No se
debe de apoyar en el instrumento ning n objeto
que contenga l quido, como jarrones.
Entry of water, needles or hair pins may result
in breakdown or short-circuit.
The product shall not be exposed to dripping or
splashing. No objects filled with liquids, such as
vases, shall be placed on the product.
Please lift up the product when moving it.
Please note that the product is heavy and must
be carried by more than two persons.
Dropping the product may result in breakdown.
● Doing so may cause the product to generate
noise.
● If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.
Failure to do so may damage them, resulting in
fire, electric shock or short-circuit.
● Doing so may result in discoloration or deformation
of the product.
● When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.
– 4 –
Do not stand on the product or exert
excessive force.
● Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or injury.
The product should be located so that its location or position does not interfere with its proper
ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.
Ensure that the ventilation is not impeded by covering the ventilation openings with items,
such as newspaper, table-cloths, curtains, etc.
Do not place naked flame sources, such as lighted candles on the product.
The product should be serviced by qualified service personnel when:
●
The power supply cord or the plug has been damaged.
●
Objects have fallen, or liquid has been spilled into the product.
●
The product has been exposed to rain.
●
The product does not appear to operate normally or exhibits a marked change in
performance.
●
The product has been dropped, or the enclosure damaged.
Notes on Repair
Should an abnormality occur in the product, immediately turn the power OFF, disconnect the
power cord plug, and then contact the shop from which the product was purchased.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION:
Pour viter les chocs lectriques, introduire la lame la plus large de la fiche dans la borne
correspondante de la prise et pousser jusqu’au fond.
Instruction for AC power cord (U.K.)
Do not plug either terminal of the power cord to the ground of the AC outlet on the wall.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
¥ Reorient or relocate the receiving antenna.
¥ Increase the separation between the equipment and receiver.
¥ Connect the equipment into an outlet on a different electrical circuit from the receiver.
¥ Consult the dealer or an experienced radio/TV technician for help.
Canadian Radio Interference Regulations
This instrument complies with the limits for a class B digital apparatus, pursuant to the Radio Interference
Regulations, C.R.C., c. 1374.
– 5 –
ASSEMBLING THE STAND
Be sure that all parts are included before starting to assemble your unit.
PARTS PROVIDED
Main Unit1pc.Music Rack1pc.
Side Board2pcs.Screw (Long)4pcs.
Back Board1pc.Screw (Short)4pcs.
1. Place the Main Unit on the floor with its back
side facing down.
2. Put the Side Boards beside the Main Unit as
shown in the illustration on the left.
3. Put together the Main Unit and Side Boards
and fasten with four screws (short).
4. Fasten the Back Board with four screws (long)
tightly. Make sure that all screws are fastened
securely.
– 6 –
5. Raise the stand up and make sure the screws
are tight enough.
6. Insert the Music Rack in the slit on the top of
the piano.
– 7 –
PART NAMES
HEADPHONES JACKS (A)
Used to connect up to two headphones to this digital piano.
POWER/VOLUME KNOB (B)
Turn the knob to the right and turn the power on. Continue turning the volume knob to the right to
increase the instrument’s volume. Turn the knob to the left to decrease the volume.
SOUND SELECT BUTTON (C)
Select the desired instrument by pressing this button repeatedly. You can also select a specific
instrument directly by pressing one of the lowest eight white keys while holding down this button.
For more details, see page 10.
METRONOME BUTTON (D)
Use this button to turn on/off the metronome.
CONCERT MAGIC BUTTON (E)
Absolutely anyone can play a real music with Concert Magic... even if you’ve never taken a piano
lesson in your life. All you have to do is to select a favorite song and tap any of the 88 keys. For
more details, see page 12.
DEMO BUTTON (F)
To listen to all the demos, simply press this button. The CL20 piano will start the demo. Eight
musical pieces will be played back until the DEMO button is pressed again to stop. To select a
specific demo, see page 16. To stop the demo, press this button again.
FRONT PANEL
DBFECA
– 8 –
MIDI JACKS (G)
Use these jacks to connect the CL20 piano with external MIDI devices.
PEDAL JACK (H)
Connect the enclosed foot pedal. You can also connect an optional F-2r foot pedal which has a soft
pedal as well.
DC IN JACK (I)
Connect the enclosed AC adaptor.
BACK PANEL
OUTIN
MIDIMIDI
PEDALPEDAL
DC IN 12VDC IN 12V
IGH
– 9 –
Loading...
+ 19 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.