Kambrook KBL110, KBL210 User Manual

Power Drive

1.5L Blender

KBL110/KBL210

Instruction Booklet

Important

Please retain your instruction
book for future use.

In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 09 271 3980 (New
Zealand). Alternatively, visit us on our website at
www.kambrook.com.au

Contents

Kambrook Recommends p4
Safety First

Your Kambrook Power Drive p6

1.5L Blender
Using Your Blender p7
Hints and Tips p8
Care and Cleaning p9
Recipes p10
Warranty p16

Kambrook Recommends Safety First

IMPORTANT: Please retain your
instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.

Important Safeguards For Your Kambrook
Power Drive Blender

• Carefully read all instructions before
operating the Kambrook Power Drive
Blender for the first time and save for
future reference.

• Remove and safely discard any
packaging material and promotional
labels before using the blender for the
first time.

• To eliminate a choking hazard for
young children, remove and safely
discard the protective cover fitted to
the power plug of this appliance.

• Do not place the blender near the
edge of a bench or table during
operation. Ensure the surface is level,
clean and free of water and other
substances. Vibration during operation
may cause the appliance to move.

• Do not use the blender on a sink
drain board.

• Do not place the blender on or near a
hot gas or electric burner, or where it
could touch a heated oven.

• Handle the blender and attachments
with care – remember the blades are
razor-sharp and should be kept out of
the reach of children.

• Always ensure the blender is
completely assembled before
operating. The blender will not operate
unless properly assembled.

• Do not use attachments other than
those provided with the blender.

• Do not attempt to operate the blender
by any method other than those
described in this booklet.

• Always secure the blade assembly onto
the blender jug before attaching to the
motor base.

• Ensure the Speed Selection dial is in
the ‘OFF’ position and the blender is
switched off at the power outlet and
the power cord is unplugged before
attaching the blender jug.

• Always operate the blender with the
blender jug lid in position.

• Keep fingers, hands, knives and other
utensils away from moving blades.

• Do not place hands or fingers into
the blender jug unless the motor and
blades have come to a complete stop.
Ensure the Speed Selection dial is in
the ‘OFF’ position and the appliance
is switched off at the power outlet and
the power cord is unplugged before
removing the lid from the blender.

• Ensure the motor and the blades
have completely stopped before
disassembling. Ensure the Speed
Selection Dial is in the ‘OFF’ position
and the appliance is switched off
at the power outlet and the power
cord is unplugged from the power

4

outlet before attempting to move
the blender, when not in use, if left
unattended and before disassembling,
cleaning or storing.

• Care should be taken when removing
the food from the blender jug by
ensuring the motor and the blades
have completely stopped before
disassembling. Ensure the Speed
Selector Dial is turned to the ‘OFF’
position, the appliance is switched off at
the power outlet and unplugged, before
removing the lid from the blender jug.
The blender jug should then be unlocked
from the motor body and the food
carefully removed before attempting to
remove the blade assembly.

• Do not operate the blender
continuously for periods longer than 1
minute on any setting or if processing a
heavy load. None of the recipes in this
book are considered a heavy load. If

the blender is operated continuously for
too long, it should be allowed to rest for
30 minutes before recommencing.

• Do not process hot or boiling liquids –
allow liquids to cool before placing into
the blender jug.

• Do not move the blender whilst
in operation.

• Do not leave the blender unattended
when in use.

• Do not place any part of the blender in
the dishwasher or microwave oven.

• Do not place anything on top of the
blender jug when the lid is on, when in
use and when stored.

• Do not allow children to use the
blender without supervision.

• Keep the blender clean. Follow the
cleaning instructions provided in
this book.

Important Safeguards For All
Electrical Appliances

• Fully unwind the power cord before use.

• Do not let the power cord hang over

the edge of a bench or table, touch
hot surfaces or become knotted.

• To protect against electric shock do not
immerse the power cord, power plug or
motor base in water or any other liquid.

• The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience
and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.

• Children should be supervised to ensure
that they do not play with the appliance.

• It is recommended to regularly inspect
the appliance. To avoid a hazard do
not use the appliance if power cord,
power plug or appliance becomes
damaged in any way. Return the
entire appliance to the nearest
authorised Kambrook Service Centre
for examination and/or repair.

• Any maintenance other than cleaning
should be performed at an authorised
Kambrook Service Centre.

• This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.

• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.

5