ITEM #_______________________________________
Drop-in Pan Chillers
Model shown KRD-41S (5 pan capacity)
Product Details
Specifications
Kairak’s versatile Drop-in Pan Chillers can
easily be retrofitted into existing counters
or can be designed into new counters
(refrigerated/non-refrigerated). These
practical components can be used not
only for chef prep counters, but also
for buffet stations, serving lines, and
specialty carts (i.e. salsa bars, condiment
stations, etc.)
Finish
Units have a stainless steel top frame,
stainless steel inner pan and chiller
plated, and stainless steel outer wrap.
Insulation
Nominal two (2) inch thick foamedin-place polyurethane.
Cut-out Sizes
Upon installation, cut out dimensions
should be 1/2” smaller than length
and width of model (see dimensional
data for details).
Refrigeration
Hermetic condensing unit is provided
and enclosed in a 18-gauge galvanized
metal housing. Units are furnished
complete with capillary tube, thermostat
and time clock.
Electrical
Self-contained units 12 amps or less are
equipped with 15 amp cord and plug
(NEMA 5-15P). All hook-ups at rear.
Ready for job site hook up.
Warranty
One (1) Year Parts & Labor
Five (5) Year Compressor
Models
KRD-27S 27” Length 3 Pan
KRD-34S 34” Length 4 Pan
KRD-41S 41” Length 5 Pan
KRD-48S 48” Length 6 Pan
KRD-55S 55” Length 7 Pan
KRD-62S 62” Length 8 Pan
KRD-69S 69” Length 9 Pan
KRD-76S 76” Length 10 Pan
KRD-83S 83” Length 11 Pan
KRD-90S 90” Length 12 Pan
Features & Benets
Patented Technology – Designed with refrigeration »
running through each divider bar to ensure direct contact
with condiment pans, always keeping food fresh and
preventing waste.
US Patent – 5,355,687 and 5,927,092
Flush Mounted Design – Heavy duty stainless steel flush »
mounted raised rail with slight slope. Prevents corrosion and
deterioration from foods (acid based foods) spilling into pan
chiller compartment and also makes pans easier to reach.
Maximum Versatility – Can be designed to accommodate »
different pan configurations/sizes depending on menu
requirements (horizontal divider bars available)
NSF Approved – Pan chilling system ensures your »
product always stays fresh regardless of unpredictable
ambient temperatures!
Optional Features
Heavy-duty hinged night cover »
Horizontal divider bars to hold 1/3, 1/6, or 1/9 sized pans »
Raised rails (slightly sloped) »
Extra depth Pan Chiller (consult factory) »
Remote option »
Drop-in Pan Chillers
www.KAIRAK.com
KRD / 5-18-2010
Made in the U.S.A.
ANSI/NSF 7
500 S. State College Blvd., Fullerton, California 92831
Toll-Free: 800-833-1106 Phone: 714-870-8661 Fax: 714-870-6473
Product Specications
DIMENSIONAL DATA KRD-27S KRD-34S KRD-41S KRD-48S KRD-55S KRD-62S KRD-69R KRD-76R KRD-83R KRD-90R
Length in. 27 34 41 48 55 62 69 76 83 90
Drop-in Pan Chillers
Depth in. 16.25 16.25 16.25 16.25 16.25 16.25 16.25 16.25 16.25 16.25
Height in. 11.25 11.25 11.25 11.25 11.25 11.25 11.25 11.25 11.25 11.25
Pan Capacity 1/3 size pan 3 4 5 6 7 8 9 10 11 12
Cut-out Dimensions in. 26.625x15 33.625x15 40.625x15 47.625x15 54.625x15 61.625x15 68.625x15 75.625x15 82.625x15 59.625x15
ELECTRICAL DATA
Voltage 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Full Load Amperes 8.6 8.6 8.6 8.6 8.6 8.6 1 1 1 1
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P Remote Remote Remote Remote
REFRIGERATION DATA
Refrigerant R-134a R-134a R-134a R-134a R-134a R-134a Remote Remote Remote Remote
H.P. 1/3 1/3 1/3 1/3 1/3 1/3 2588 2880 3171 3463
SHIPPING DATA
Shipping Weight 180 200 220 250 270 310 180 195 210 225
Comments:
Toll-Free: 800-833-1106 Phone: 714-870-8661 Fax: 714-870-8667
500 S. State College Blvd., Fullerton, California 92831
www.KAIRAK.com