Kairak KIR10S User Manual

ITEM #_______________________________________

Remote Refrigeration System (KIR Series)

Model KIR12S

Product Details

SPECIFICATIONS

Kairak offers an extensive line of remote

refrigeration systems for various applications

and environmental conditions. Remote systems

provide great benefits to any operations

by removing heat and noise of multiple

compressors from the retail area or kitchen

space thus reducing air conditioning and

operating costs.

REFRIGERATION UNITS

Water-cooled compressors are hermetic/glacier

scroll type (Copeland). Each unit is equipped

with high-low pressure control, liquid drier,

sight glass & head pressure control.

All compressor units are new factory assembled

to operate with the refrigerant specified in the

engineering summary sheet. Refrigerant R-404a

is used on all commercial temperature units and

low temperature units.

All piping is pressure tested with nitrogen at

100 PSI. After the condensing unit and coil have

been connected, the balance of the system is

leak tested with all valves open.

Control Panel

The package is factory mounted and pre-wired

control panel complete with main disconnect

breaker switch, compressor circuit breakers,

fuses, contractors and time clocks wired for

single point connection.

Electrical contractor shall provide and install

main power lines to panel and provide wire

harness wiring for control and defrost heater

between the defrost clock and the refrigerant

fixtures. All in accordance with the wiring

diagram and local codes and shall ensure

that main power feed enters refrigeration

equipment through same pitch pocket as the

refrigeration lines.

Models

INDOOR RAK SINGLE TIER MODELS

KIR10S
KIR12S
KIR14S

Features

Compressors are installed on a heavy-duty frame.

»

Fabricated of structural steel.

»

Frame is pre-assembled, welded, cleaned and

»

epoxy coated.

Water-condenser is designed for 10

»

0

Remote Refrigeration System (KIR Series)

FTD.

PRE-PIPING

All refrigerant lines are extended to one side

of the package in a neat and orderly manner.

Suction line for medium and low temperature

units must be insulated with Armaflex (3/4”

thick).

All tubing is securely supported and anchored

with clamps.

Silver Solder and/or sil-fos used for all

refrigerant piping. Soft solder is not acceptable.

NSF7

www.KAIRAK.com

EVAPORATOR COIL

Evaporator coils are direct expansion type

fabricated of copper tubes with aluminum fins.

All evaporator coils are provided with solenoid

valve, thermostatic expansion valve and

thermostat. Piped and wired to the junction

box for positive pump down.

WARRANTY

Five (5) Year Compressor. One (1) Year Parts

and Labor.

Options

»

Liquid Line Solenoid

»

Emergency Water By-Pass

»

Other sizes available 10’-14’ in length

»

Depth & height of units can be fabricated for job
site conditions.

»

Semi-Hermetic Compressor

500 S. State College Blvd., Fullerton, California 92831
Toll-Free: 800-833-1106 Phone: [phone] Fax: [phone]

KIR-07-25 / 09-23-07
Made in the U.S.A.

Remote Refrigeration Systems (KIR Series)

Remote Refrigeration Systems (KIR Series)

KIR10S Model KIR12S Model

KIR14S Model

Product Specifications

DIMENSIONAL DATA KIR10S KIR12S KIR14S

Length - in. 120 144 168

Depth - in. 45 45 45

Height in. 36 36 36

Electrical & refrigeration data varies on product configuration.

Consult factory for product data.

KIR-07-25 / 09-23-07
Made in the U.S.A.

Toll-Free: 800-833-1106 Phone: [phone] Fax: [phone]

500 S. State College Blvd., Fullerton, California 92831

www.KAIRAK.com