Jwin JP-121 User Manual

Digital Photo Frame V10M10_IM_EN_01222008

DIGITAL PHOTO FRAME

WITH KEYCHAIN

Instruction Manual

JP-121

Please read this manual carefully before operating and save it

for future reference.

Have a question? Please visit http://www.jWIN.com

- 1 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

USER SAFETY GUIDE

Instructions on Environmental Protection

Do not dispose of this product in the usual
household garbage at the end of its life
cycle; bring it to a collection point for the
recycling of electrical and electronic
appliances. This symbol on the product
means the instructions for use or the packing
will inform about the methods for disposal. The materials are
recyclable as mentioned in its marking. By recycling, material
recycling, or other forms of re-utilization of old appliances, you
make an important contribution to protect the environment.
Please inquire at your local community administration for the
authorized disposal location.

Important Safety Warnings

1. To prevent fire or electric shock, do not expose the unit to
rain or moisture.

2. Never attempt to open the cabinet. Always refer servicing to
a qualified technician.

FCC regulations state that any change or modification to
the equipment, not expressly approved by maker or its
authorized parties, could void user’s authority to operate
this equipment.

- 2 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

USER SAFETY GUIDE

Important Safety Instructions

1. READ INSTRUCTIONS - All safety and operating
instructions should be read before the appliance is
operated.

2. RETAIN INSTRUCTIONS - The safety and operating
instructions should be retained in a secure place for future
reference.

3. HEED WARNINGS - All warnings on the appliance and in
the operating instructions should be observed.

4. FOLLOW INSTRUCTIONS - All operating and use
instructions should be followed.

5. WATER AND MOISTURE - The appliance should not be
used near water. For example: near a bathtub, kitchen sink,
laundry tub, and/or swimming pool.

6. HEAT - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.

7. POWER SOURCES - The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the appliance.

8. CLEANING - The appliance should only be cleaned with a
dry cloth.

9. OBJECT AND LIQUID ENTRY - Care should be taken so
that objects do not fall and liquids are not spilled into the
device’s openings.

10. CARTS AND STANDS - The appliance
should be used only with a cart or stand
that is recommended by the manufacturer.
An appliance and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the appliance and cart combination to overturn
causing possible injury to the user and/or damage to the
unit.

- 3 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

USER SAFETY GUIDE

Important Safety Instructions – Continued

11. DAMAGE REQUIRING SERVICE - The appliance should
be serviced by qualified service professional when:
a. Objects have fallen into, or liquid has been spilled into

the appliance’s apertures.
b. The appliance has been exposed to rain.
c. The appliance has been dropped and suffered damage.
d. The appliance does not appear to operate normally, or

exhibits a change in performance.

12. SERVICING - The user should not attempt to service the
appliance beyond what is described in the user's operating
instructions. All other servicing should be referred to
qualified service professional.

13. LEAD AND MERCURY - This product may contain lead
and/or mercury. Disposal of these materials may be
regulated by your local authorities due to environmental
considerations. For more detailed disposal or recycling
information, please contact your local authorities or the EIA
(Electronic Industries Alliance) – http://www.eiae.org

Additional Safety Instructions

• When not in use, keep your device in a safe place where it
will not be bent or crushed.

- 4 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

USER SAFETY GUIDE

FCC Notice to U.S. Users

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Refer to 47 CFR Sec. 15.19.

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications, which can be determined by turning the
equipment off and on, the user is encouraged to correct the
interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician
for help.

NOTE: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate the equipment. Refer
to 47 CFR Sec. 15.21.

- 5 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

USER SAFETY GUIDE

Industry Canada Notice to Canadian Users

Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation of the device. Refer to IC
RSS 210 Sec. 5.11. The term “IC” before the certification or
registration number only means that the registration was
performed based on a Declaration of Conformity and that
Industry Canada technical specifications were met. It does not
imply that Industry Canada (IC) approved this equipment. Refer
to Self-Marking 6(f) and RSP 100 Sec. 4.

- 6 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

GETTING STARTED

Thank you for purchasing the JP-121. Unpack the unit and make
sure all the accessories are put aside so they will not be lost.

Digital Photo Frame with 1.2” OLED Display
Screen and Built-in Memory Keychain

• Displays digital photos on 1.2” OLED full color screen

• Supports JPEG and BMP format

• Download photos through mini USB 1.1 port

• Built-in 8MB flash memory stores up to 70 photos (96 x

64)

• Built-in 180mAh rechargeable Li-Ion Polymer battery

(charges through mini USB port)

• Supports single photo and auto slide show modes

• Auto power off / Manual power off

• Share photos with family and friends anywhere you go

• Windows Vista ready

• Playback time up to 6 hours

What’s included

• 1.2” Digital Photo Frame Keychain

• USB cable

• Keychain

• Software CD

• Instruction Manual

• Warranty Card

- 7 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

GETTING STARTED

Location of Controls

1

3

4

2

1. UP and DOWN buttons 3. MENU button

2. OLED screen 4. Mini-USB port

Charging

• Attach the picture frame to your computer using the USB

cable (included). Once connected, the unit will charge
automatically.

• Fully charge the unit before first use.

- 8 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

OPERATIONAL INSTRUCTIONS

Power On/Off

In OFF mode, press and hold the
MENU button to power on.

The Main menu will display on the
screen: Slide time, Sleep time,
Delete, Effect, Contrast, Light, Info, Exit.
In ON mode, press and hold the MENU button to power off.

Slide time

In ON mode, press the MENU button to enter the main menu,
then press the UP or DOWN buttons to select Slide time. Press
the MENU button to enter. Select “ON” (“OFF” will stop the
function).

Press UP or DOWN buttons to choose the slide time interval.
There is 01 to 180 seconds available. Press the MENU button to
save the setting.

- 9 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

OPERATIONAL INSTRUCTIONS

Sleep time

In ON mode, press the MENU button to enter the main menu,
then press the UP or DOWN buttons to select Sleep time. Press
the MENU button to enter. Select “ON” (“OFF” will stop the
function).

Press UP or DOWN buttons to choose the sleep time. There is
01 to 180 minutes available. Press the MENU button to save the
setting.

Delete Photo

In ON mode, press the MENU button to enter the main menu,
then press the UP or DOWN buttons to select Delete. Press the

MENU button to enter. Select “Delete One”, and press the
MENU button to confirm and delete the selected image. Select

“Delete All” followed by the MENU button to confirm and delete
the all images.

- 10 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

OPERATIONAL INSTRUCTIONS

Effect

In ON mode, press the MENU button to enter the main menu,
then press the UP or
DOWN buttons to
select Effect. Select
ON, and the picture
will play in effect. (OFF
will stop the function.)

Light

In ON mode, press the MENU button to enter the main menu,
then press the UP or DOWN buttons to select Light (01-10).
Press the MENU
button to enter.

Info

Display information on
firmware version,
memory status.

- 11 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

OPERATIONAL INSTRUCTIONS

Exit

Exit from the main menu.

Using the Digital Photo Frame Tool

Connect the device to a PC using the USB cable (included).
Select Update and “charge” will display on the screen. Open the
Digital Photo Frame Tool for the following image.

- 12 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

OPERATIONAL INSTRUCTIONS

Photo Frame Tool-continued

Interface instruction (see image on previous page)

A. File path select.
B. Preview window. Display the image selected
C. Displays the images selected in a window.
D. Displays the images which will be downloading to device.
E. Displays the image path selected, the number of the

images in download window/the number of the images in
device/the total number of the images able to be stored in
device. Displays the rate of progress.

Menu instruction

Append: Append the images in download window to the device.
Overlay: Overlay the device with the images in download

window.

Save: Save the images in window D to the Digital Photo

Frame PC soft directory.

Lantern Slide: Display the lantern slide with the images in C area.
About: Information of the company and device.

- 13 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

SPECIFICATIONS

• LCD Panel

o Diagonal Size: 1.2”

• Support file type: JPEG, BMP

• Inputs and Outputs

o DC power Input Jack (Mini USB)

• Power Sources

o DC 5V (USB)

• Unit Dimensions (W x H x D): 1.88” x 2.6” x 0.49”

(47.8mm x 66mm x 12.4mm)

- 14 -

www.jWIN.com

Digital Photo Frame V10M10_IM_EN_01222008

- 15 -

www.jWIN.com

TEL: [phone]
FAX: [phone]

website: www.jWIN.com

© 2008 jWIN Electronics Corp. All rights reserved. No
portion of this printed material or product enclosed
herewith including design, shape and graphics, may be
reproduced or transmitted in any form without the
expressed written consent of jWIN Electronics Corp. by
any means, electronic or mechanical, including
photocopying, recording or use of an information
storage and retrieval system. Any unauthorized
distribution or reproduction of this printed material or
product, or any portion thereof, will be prosecuted to
the fullest possible extent of the law.