Jwin JP-147 User Manual

0 (0)
Jwin JP-147 User Manual

Digital Photo Frame

V10M10_IM_EN_08172007

DIGITAL PHOTO FRAME WITH

BUILT-IN MEMORY

Instruction Manual

JP-147

Please read this manual carefully before operating and save it for future reference.

Have a question? Please visit http://www.jWIN.com

- 1 -

www.jWIN.com

Digital Photo Frame

V10M10_IM_EN_08172007

- 2 -

www.jWIN.com

Digital Photo Frame

V10M10_IM_EN_08172007

USER SAFETY GUIDE

Instructions on Environmental Protection

Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing

will inform about the methods for disposal. The materials are recyclable as mentioned in its marking. By recycling, material recycling, or other forms of re-utilization of old appliances, you make an important contribution to protect the environment.

Please inquire at your local community administration for the authorized disposal location.

Important Safety Warnings

1.To prevent fire or electric shock, do not expose the unit to rain or moisture.

2.Never attempt to open the cabinet. Always refer servicing to a qualified technician.

FCC regulations state that any change or modification to the equipment, not expressly approved by maker or its authorized parties, could void user’s authority to operate this equipment.

- 3 -

www.jWIN.com

Digital Photo Frame

V10M10_IM_EN_08172007

USER SAFETY GUIDE

Important Safety Instructions

1.READ INSTRUCTIONS - All safety and operating instructions should be read before the appliance is operated.

2.RETAIN INSTRUCTIONS - The safety and operating instructions should be retained in a secure place for future reference.

3.HEED WARNINGS - All warnings on the appliance and in the operating instructions should be observed.

4.FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.

5.WATER AND MOISTURE - The appliance should not be used near water. For example: near a bathtub, kitchen sink, laundry tub, and/or swimming pool.

6.HEAT - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

7.POWER SOURCES - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

8.CLEANING - The appliance should only be cleaned with a dry cloth.

9.OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the device’s openings.

10.CARTS AND STANDS - The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn causing possible injury to the user and/or damage to the unit.

- 4 -

www.jWIN.com

Digital Photo Frame

V10M10_IM_EN_08172007

USER SAFETY GUIDE

Important Safety Instructions – Continued

11.DAMAGE REQUIRING SERVICE - The appliance should be serviced by qualified service professional when:

a.Objects have fallen into, or liquid has been spilled into the appliance’s apertures.

b.The appliance has been exposed to rain.

c.The appliance has been dropped and suffered damage.

d.The appliance does not appear to operate normally, or exhibits a change in performance.

12.SERVICING - The user should not attempt to service the appliance beyond what is described in the user's operating instructions. All other servicing should be referred to qualified service professional.

13.LEAD AND MERCURY - This product may contain lead and/or mercury. Disposal of these materials may be regulated by your local authorities due to environmental considerations. For more detailed disposal or recycling information, please contact your local authorities or the EIA (Electronic Industries Alliance) – http://www.eiae.org

Additional Safety Instructions

When not in use, keep your device in a safe place where it will not be bent or crushed.

- 5 -

www.jWIN.com

Digital Photo Frame

V10M10_IM_EN_08172007

USER SAFETY GUIDE

FCC Notice to U.S. Users

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Refer to 47 CFR Sec. 15.19.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Refer to 47 CFR Sec. 15.21.

- 6 -

www.jWIN.com

Digital Photo Frame

V10M10_IM_EN_08172007

USER SAFETY GUIDE

Industry Canada Notice to Canadian Users

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. Refer to IC RSS 210 Sec. 5.11. The term “IC” before the certification or registration number only means that the registration was performed based on a Declaration of Conformity and that Industry Canada technical specifications were met. It does not imply that Industry Canada (IC) approved this equipment. Refer to Self-Marking 6(f) and RSP 100 Sec. 4.

- 7 -

www.jWIN.com

Digital Photo Frame

V10M10_IM_EN_08172007

- 8 -

www.jWIN.com

Loading...
+ 16 hidden pages