DUAL ALARM CLOCK RADIO with
PROJECTION and AM/FM RADIO
Instruction Manual
JL-365
Please read this manual carefully before operating
and save it for future reference.
Have a question? Please visit http://www.jWIN.com
INTRODUCTION
Thank you for purchasing the JL-365. Unpack the unit and make sure to put
aside all accessories so they will not be lost. We recommend that you retain
the original packaging materials for future use, should you transport or ship
the unit in the future.
Features
• 120-degree clock projection
• Digital alarm clock with 9-minute snooze function
• Integrated AM / FM radio
• PLL digital tuning technology
• Programmable preset for 40 radio stations (20 AM / 20 FM)
• Wake to radio or buzzer
• Fall asleep to radio
• Dimmer button to adjust LCD brightness
• 3.5mm Aux. in jack
• Built-in speaker
What’s Included
• Projection Alarm Clock Radio
Printed in China
GETTING STARTED
Location of Controls (Top / Back View)
1 2 3 4 5
6 7 8 9 10 11 12 13 14 15 16
1. STANDBY button 7. VOLUME dial 13. Dimmer Hi/Lo switch
2. Source(AM/FM/AUX) switch
3. Projector lens 9. SNOOZE button 15. TUNING - button
4. ALARM 1 button 10. MODE button (projector) 16. AUX IN jack
5. TUNING + button 11. PROJECTION ON/OFF switch
6. SLEEP button 12. SET button (projector)
8. TIME SET / MEMORY button 14. ALARM 2 button
Printed in China
GETTING STARTED
Power Source
• AC Power: Plug the AC power cord into the standard household outlet.
Caution: Before connecting the unit to power, please make sure your local
voltage is the same as marked on the back plate of the unit.
• Backup battery: Install 1.5Vx2 AAA(UM4) size battery (not included)
into the battery compartment, and close the lid securely. These batteries
are to keep the clock running when the AC power is disconnected.
Caution: Make sure the positive (+) and negative (-) battery terminals are
attached to the corresponding plates in the battery compartment.
Printed in China