Jwin JL-355 User Manual
DUAL ALARM CLOCK
with AM/FM RADIO
Instruction Manual
JL-355
Please read this manual carefully before operating
and save it for future reference.
Have a question? Please visit http://www.jWIN.com
INTRODUCTION
Thank you for purchasing the JL-355. Unpack the unit and make sure to put
aside all accessories so they will not be lost. We recommend that you retain
the original packaging materials for future use, should you transport or ship
the unit in the future.
Features
• Digital alarm clock with 9-minute snooze function
• Integrated AM / FM radio
• PLL digital tuning technology
• Programmable preset for 40 radio stations (20 AM / 20 FM)
• Wake to radio or buzzer
• Fall asleep to radio
• Dimmer button to adjust LCD brightness
• 3.5mm Aux. in jack
• Built-in speaker
What’s Included
• Alarm Clock Radio
Printed in China
GETTING STARTED
Location of Controls (Top / Back View)
1 2 3 4 5
6 7 8 9 10 11 12
1. STANDBY button 5. TUNING + button 9. Dimmer Hi/Lo switch
2. Source(AM/FM/AUX) switch 6. SLEEP button 10. ALARM 2 button
3. SNOOZE button 7. VOLUME dial 11. TUNING - button
4. ALARM 1 button 8. TIME SET / MEMORY button 12. AUX IN jack
Power Source
• AC Power: Plug the AC power cord into the standard household outlet.
Caution: Before connecting the unit to power, please make sure your local
voltage is the same as marked on the back plate of the unit.
• Backup battery: Install 1.5Vx2 AAA(UM4) size battery (not included)
into the battery compartment, and close the lid securely. These batteries
are to keep the clock running when the AC power is disconnected.
Caution: Make sure the positive (+) and negative (-) battery terminals are
attached to the corresponding plates in the battery compartment.
Printed in China
OPERATIONAL INSTRUCTIONS
Setting the Clock
1. Press and hold TIME SET / MEM and the hour will flash.
2. Press TUNING + / - to find the correct hour setting.
3. Press TIME SET / MEM again the minute will flash.
4. Press TUNING + / - to find the correct minute setting.
Using the Radio
1. Press STANDBY to turn radio on.
2. Press SOURCE to select FM or AM mode.
3. Select your desired station using TUNING+ / -.
4. Turn the VOLUME CONTROL knob to adjust volume as needed.
5. Press STANDBY to turn radio off.
Wake to Radio
1. Repeatedly press ALARM 1 / 2 until “RADIO” icon appears on the
LCD screen to indicate alarm status
2. Press and hold ALARM 1 / 2 and hour will flash.
3. Select your desired wake up hour using TUNING+ / -.
4. Press ALARM 1 / 2 and minute will flash.
5. Select your desired wake up minute using TUNING+ / -.
Wake to Buzzer
1. Repeatedly press ALARM 1 / 2 until “BUZZER” appears on the LCD
screen to indicate alarm status
2. Press and hold ALARM 1 / 2 and hour will flash.
3. Select your desired wake up hour using TUNING+ / -.
4. Press ALARM 1 / 2 and minute will flash.
5. Select your desired wake up minute using TUNING+ / -.
Alarm Duration and Snooze Function
Alarm Duration – Buzzer alarm or Radio alarm will continue output for
60 minutes if no buttons are pressed, then it will stop automatically and
sound again at same alarm time the next day.
Snooze Function:
1. When the Alarm sounds, press SNOOZE to enable the snooze
function, Buzzer alarm or Radio alarm will stop.
2. The alarm will sound again in 9 minutes
3. Unless STANDBY or ALARM 1 / 2 is pressed to stop the alarm,
the Snooze function will continue for up to 60 minutes from the
first alarm.
Printed in China
Loading...