Jwin JD-VD755 User Manual

Portable DVD Player

JD-VD755QGV10M10EN05162005

Quick Guide

Welcome

Please carefully follow the instructions to set up your Portable DVD Player.

Getting to Know Your Portable DVD Player

FRONT VIEW DIAGRAM

RIGHT SIDE DIAGRAM

to the Portable DVD Player Quick Guide.

LCD screen

SPEAKERS

POWER indicator

1. Volume Control

2. Headphone jack

3. Coaxial output jack

4. Audio output jack

5. Video output jack

6. POWER Switch

7. S-Video/P-Scan output jack

8. DC IN jack

OPEN button

PLAY button PAUSE button STOP button

SPEAKERS Remote Sensor

45 6 87

REMOTE CONTROL DIAGRAM

1 2 3 4

5 6

7 8

1. SETUP button

2. INFO. button

3. PAUSE/UP button

4. MENU button

5. F.REV/LEFT button

6. PLAY/SEL. button

7. PREVIOUS button

8. STOP/DOWN button

9. Number buttons

10. MODE button

11. LCD button

12. SUBTITLE button

13. TITLE button

14. ANGLE button

15. F.FWD/RIGHT button

16. AUDIO button

17. NEXT button

18. REPEAT 1/ALL button

19. MUTE button

10 11 12 13 14 15 16 17 18

BATTERY INSTALLATION FOR THE REMOTE CONTROL

Insert the battery and match the (+) and (-) on battery to the marks inside the battery compartment.

First-time use:

Remember to remove the insulating Mylon piece from the battery.

Service life of battery

1. The battery normally lasts for about one year although this depends on how often and for what operations the remote control is used.

2. If the remote control unit fails to work even when it is operated near the player, replace the battery.

3. Use a 3V lithium battery, No. CR2025.

- 1 -

CR2025

OPEN

PUSH

REMOTE CONTROL OPERATION RANGE

Point the remote control unit no more than 6 meters from the remote control sensor and within 60

The operating distance may vary according to the brightness of the room.

Note:

1. Do not point bright lights at the remote control signal sensor.

2. Do not place objects between the remote control unit and the remote control signal sensor.

3. Do not use this remote control unit while simultaneously operating the remote control unit of any other equipment.

of the front of the unit.

remote sensor

Using the Battery Pack

“The shape of the following battery pack is only for reference; the actual shape may differ.”

Battery charge

Battery release button

DC IN jack

Before using the battery pack, make sure to charge it. You could choose to charge the battery pack directly or charge it while attached to the portable DVD player.

Battery Pack Information (Charge & Playback Time)

NiMH 3800mAh (6S1P)

Charge Time(hr) DVD Playback Time(hr)

3.5 2.7

indicator Battery connectors

A. To charge the battery pack directly

STEP 1. Connect the AC adapter (12V, 1.25A) to the DC IN

jack on the left side of the battery pack and a household power outlet as shown in figure (A).

(A)

DC IN jack

STEP 2. The battery charge indicator will turn red and start

STEP 3. When the battery pack is fully charged, the battery

charging.

charge indicator will turn green.

B. To charge the battery pack while

attached to the portable DVD player

STEP 1. Please align the portable DVD player’s battery

connectors with the battery pack’s battery connectors. Attach the battery pack to the portable DVD player as shown in figure (B).

(B)

Quick Operation Guide

STEP 1. Connecting to Power. (A)

Please connect the supplied AC adaptor to the DC IN jack on the right side of the portable DVD 100Player.

(A)

STEP 2. Connect it with earphones, or connect it

This unit can be connected to a television or home sound system.

Note: Before connections, make sure to turn off the power of the

to external equipment. (B)

portable DVD player and the external equipment.

(B)

STEP 3. Open the display panel. (C)

(C)

STEP 4. Slide the POWER switch to the ON position to

turn on the DVD player. (D)

(D)

STEP 5. Press <OPEN> to open the disc cover. (E)

(E)

Note:

1. Please turn the power off when attaching or removing the battery pack.

2. If you want to remove the battery pack, press the battery release button, then slowly remove it from the portable DVD player.

STEP 2. Connect the AC adapter (12V, 1.25A) to the DC IN

STEP 3. The battery charge indicator will turn red and start

STEP 4. When the battery pack is fully charged, the battery

Note:

1. The battery pack will not be charged while the portable DVD

2. Please use the specific power adapter (12V, 1.25A) to charge

jack on the right side of the portable DVD player and a household power outlet.

charging.

charge indicator will turn green.

player is turned on.

the battery pack.

(White)(Red) (Yellow) (Blue) (Red) (Green)

1 2 3

Note: Make sure the external equipment supports the audio/

video input feature.

Back/front panel of external equipment

(White)

(Red)

Video input

TV S-Video input

S-Video

Audio input

P-Scan TV

(Blue)

Video input

(Red)

(Green)

- 2 -

STEP 6. Gently hold the edge of the disc, then put

it in the center with the printed side up.

STEP 7. Close the disc cover.

STEP 8. Press

<PLAY/SEL.> to play the disc.