JVC TS-C421SPGU, TS-C421SPG User Manual

SPEAKER UNIT

INSTALLATIONANLEITUNG :LAUTSPRECHEREINHEIT MANUEL D’INSTALLATION :ENCEINTE MANUALE D’INSTALLAZIONE :UNITÀ DI DIFFUSIONE MANUAL DE INSTALACION : UNIDAD DE ALTAVOZ

ENGLISH

DEUTSCH

FRANÇAIS

TS-C421SPG TS-C421SPGU

INSTALLATION MANUAL

ITALIANO

ESPAÑOL

SPEAKER UNIT FOR A JVC PLASMA DISPLAY MONITOR LAUTSPRECHEREINHEIT FÜR JVC PLASMA BILDSCHIRM ENCEINTE POUR UN MONITEUR DE VISUALISATION PLASMA UNITÀ DI DIFFUSIONE PER MONITOR CON SCHERMO AL PLASMA JVC UNIDAD DE ALTAVOZ PARA UN MONITOR PLASMA DISPLAY

LCT1425-001A

SAFETY PRECAUTIONS

Regarding the “safety precaution” symbols

Various symbols are indicated on the product and in this Installation Manual. These symbols are provided in order to prevent physical injury and material damage. Be sure you understand the meaning of the symbols before reading this manual.

Explanation of symbols

• This symbol (including a warning) indicates that CAUTION should be exercised.

General caution

• Prohibited actions are indicated by the following symbols.

Prohibited

• Actions that should be performed (compulsory and instructed actions) are indicated by the following symbol.

General instruction

Disassembling prohibited

Failure to observe what is mentioned under this symbol

WARNING

• Do not modify (disassemble) the front speakers. This could result in fire or electric shock.

CAUTION

• Connect the power cord plug to a wall outlet only after all necessary equipment has been connected. Making connections while the power cord plug is connected to the wall outlet could result in electric shock.

could lead to physical injury and material damage. Extreme caution should be exercised.

Failure to observe what is mentioned under this symbol could lead to physical injury and material damage. Extreme caution should be exercised.

ENGLISH

Accessories

Check to be sure you have all of the supplied accessories. The number in the parentheses is the quantity of the pieces supplied. If anything is missing, contact your dealer immediately.

Front speakers (L,R)

Speaker cords

(1.2 m x 2)

Cord clamps (2)

Mounting screws

(for the GD-V42XX

series display) (6)

Names of parts

Front

1 Speaker unit

2 Saran net

This net protects the speaker.

Back

3 Speaker bracket

Attach to the back of the display.

4 Speaker terminal

Connect this terminal to the speaker terminal on the display using the supplied speaker cords.

Using the speaker brackets, you can attach the front speakers to the side of the display.

• For attaching the front speakers to the GD-V42XX series display, see page 4.

• In this section, the GM-P420 series displays are shown in the illustrations. The mounting screw positions of the other displays are almost the same as those of the GM-P420 series, therefore you can attach the front speakers as in the procedure below.

ENGLISH

• Do not loosen the screws other than the mounting screws.

• Use only the screws already attached to the display.

Attaching the front speakers to displays other than the GD-V42XX series

1. Loosen the mounting screws on the back of the display.

Loosen the mounting screws with phillips screwdriver, leaving a length of about 3 mm.

Mounting screws

2. Attach the front speaker to the back of the display.

Hook the speaker bracket onto three mounting screws through the screw holes (A), and slide it down.

Mounting screws

Screw hole (A)

3. Tighten the mounting screws firmly with phillips screwdriver.

Front speaker

• When moving the display, do not hold the speakers.

• The speakers are not of anti-magnetic type. Do not place anything susceptible to magnetism, such as a video tape, nearby when setting the speakers.

+ 4 hidden pages