JVC TH-M337B User Manual

Contents

Important Safety Instructions .............................................................................................1

Safety .......................................................................................................................................................................................1

Warning ..................................................................................................................................................................................2

What’s in the Box ...................................................................................................................4

Identifying the Parts .............................................................................................................5

Main Unit ...............................................................................................................................................................................5

Wireless Subwoofer............................................................................................................................................................5

Remote Control ...................................................................................................................................................................6

Preparations ..........................................................................................................................6

Prepare the Remote Control ...........................................................................................................................................6

Replace the Remote Control Battery ...........................................................................................................................6

Placement and Mounting ................................................................................................................................................7

Wall Mounting (if using option-B) ................................................................................................................................7

Connections ...........................................................................................................................8

Use the OPTICAL Socket ...................................................................................................................................................8

Use the COAXIAL Socket ..................................................................................................................................................8

Use the AUX Socket ............................................................................................................................................................8

Connect Power .....................................................................................................................................................................9

Pairing the Wireless Subwoofer with the Main Unit ..........................................................9

Automatic pairing ...............................................................................................................................................................9

Manual pairing .....................................................................................................................................................................9

Basic Operation ...................................................................................................................10

Standby/ON ....................................................................................................................................................................... 10

Select Modes ..................................................................................................................................................................... 10

djust the Volume .............................................................................................................................................................. 10

Select a Preset Sound Effect ........................................................................................................................................ 10

AUX/OPTICAL/COAXIAL Operation ...................................................................................10

Bluetooth Operation ...........................................................................................................11

Pair Bluetooth-enabled Devices ................................................................................................................................. 11

Listen to Music from Bluetooth Device ................................................................................................................... 11

USB Operation .....................................................................................................................12

Troubleshooting ..................................................................................................................12

Specifications ......................................................................................................................13

- 1 -

The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude as
to constitute a risk of electric shock to
persons.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.

Safety

1 Read these instructions – All the safety

and operating instructions should be read
before this product is operated.

2 Keep these instructions – The safety and

operating instructions should be retained
for future reference.

3 Heed all warnings – All warnings on the

appliance and in the operating instructions
should be adhered to.

4 Follow all instructions – All operating and

usage instructions should be followed.

5 Do not use this apparatus near water –

The appliance should not be used near water
or moisture – for example, in a wet basement

or near a swimming pool and the like.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.
8 Do not install near any heat sources such as

radiators, heaters, stoves, or other apparatus

(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the

polarized or grounding plug. A polarized

plug has two blades with one wider than

the other. A grounding plug has two blades

and a third grounding prong. The wide
blade or the third prong is provided for

your safety. If the provided plug does not t

into your outlet, consult an electrician for
replacement of the obsolete outlet.

10 Protect the power cord from being walked

on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.

11 Only use attachments/accessories specied

by the manufacturer.

12

Use only with the cart, stand,

tripod, bracket or table specied

by the manufacturer, or sold with
the apparatus. When a cart or

rack is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.

13 Unplug the apparatus during lightning

storms or when unused for long periods of
time.

14 Refer all servicing to qualified personnel.

Servicing is required when the apparatus
has been damaged in any way, such as
power supply cord or plug is damaged,
liquid has been spilled or objects have
fallen into the apparatus, the unit has been
exposed to rain or moisture, does not
operate normally, or has been dropped.

15

This equipment is a Class II or double
insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical
earth.

16 The apparatus shall not be exposed to

dripping or splashing. No objects filled with
liquids, such as vases, shall be placed on the
apparatus.

17 Minimum distance around the apparatus

for sufficient ventilation is 5cm.

18 The ventilation should not be impeded

by covering the ventilation openings with
items, such as newspapers,table-cloths,
curtains, etc…

19 No naked flame sources, such as lighted

candles, should be placed on the apparatus.

20 Batteries should be recycled or disposed of

as per state and local guidelines.

21 The use of apparatus in moderate climates.

Important Safety Instructions

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

- 2 -

• Caution:

- Use of controls or adjustments or
performance of procedures other than
those described herein, may result in
hazardous radiation exposure or other
unsafe operation.

- To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture. The apparatus must not be
exposed to dripping or splashing and
objects filled with liquids, such as vases,
must not be placed on apparatus.

- The mains plug/appliance coupler is used
as the disconnect device, the disconnect
device must remain readily operable.

- Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.

Warning

• The battery (batteries or battery pack) shall
not be exposed to excessive heat such as
sunshine, fire or the like.

• Before operating this system, check the
voltage of this system to see if it is identical
to the voltage of your local power supply.

• Do not place this unit close to strong
magnetic fields.

• Do not place this unit on the amplifier or
receiver.

• Do not place this unit close to damp areas
as the moisture will affect the life of the
laser head.

• If any solid object or liquid falls into the
system, unplug the system and have it
checked by qualified personnel before
operating it any further.

• Do not attempt to clean the unit with
chemical solvents as this may damage the
finish. Use a clean, dry or slightly damp
cloth.

• When removing the power plug from the
wall outlet, always pull directly on the plug,
never yank on the cord.

• Changes or modifications to this unit not
expressly approved by the party responsible
for compliance will void the user’s authority
to operate the equipment.

• The rating label is pasted on the bottom or
back of the equipment.

• This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum distance
20cm between the radiator & your body.

DO NOT INGEST BATTERY,CHEMICAL
BURN HAZARD

The remote control supplied with this

product contains a coin/button cell battery.
If the coin/button cell battery is swallowed,
it can cause severe internal burns in just
2 hours and lead to death. Keep new and
used batteries away from children. If the
battery compartment does not close
securely, stop using the product and keep
it away from children. If you think batteries
might have been swallowed or placed
inside any part of the body, seek immediate
medical attention.

Correct Disposal of this product. This marking
indicates that this product should not be
disposed with other household wastes
throughout the EU. To prevent possible
harm to the environment or human health
from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems
or contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.

We hereby declares that this product is in
compliance with the essential requirements
and other relevant provisions of Directive
2014/53/EU.

The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. We are the licensee to use such marks.
Other trademarks and trade names are those of
their respective owners.

Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.

- 3 -

For U.S. models

FCC Information

Warning:

Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.”

NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.

• However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio / TV technician for help.

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired

operation.

• IC Notice:

This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference. and (2) this device must accept any
interference. Including interference that may cause undesired operation of the device.
CAN ICES-3 (B) / NMB-3 (B)

Avis d’Industrie Canada

Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de
licence L'exploitation est autorisée aux deux conditions suivantes:
(1) I'appareil ne doit pas produire de brouillage, et (2) I'utillsateur de I'appareil doit accepterbrouillage
radioélectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais
fonctionnement de I'appareil.

- 4 -

RCA to 3.5mm audio cable

What’s in the Box

Main Unit

Wall Bracket

3.5mm to 3.5mm audio cable

Remote Control

AC Power cord
(for Main Unit)

User Manual

Wireless Subwoofer

AC Power cord

(for Subwoofer)

- 5 -

Identifying the Parts

Main Unit

1

2

3

4 5 6 7

8 98 10

11 12

1 2 3

1 Remote Control Sensor
2

LED Indicators

• Red indicator: In STANDBY mode.

• Green indicator: In AUX mode.

• Orange indicator: In Optical mode.

Orange flash: In Coaxial mode.

• Blue indicator: In Bluetooth mode.

• White indicator: In USB mode.

3 Wall bracket screws

4 button

Switch the unit between on and Standby

mode.

5 SOURCE button

Select the play function.

6 EQ

Select a preset sound effect.

7 VOL+/VOL- buttons

Increase/decrease the volume level.

8 AC~ Socket
Connect power cord.

9 COAXIAL Socket

COAXIAL input jack.
10 OPTICAL Socket
Opticial input jack.
11 USB Socket

Insert the USB device to play music.
12 AUX 1 Socket

Connect to an external audio device.

Wireless Subwoofer

1 AC~ Socket

Connect to power.

3 PAIR button

Connects to the main unit.

2 PAIR Indicator

Lights up solidly when pairing is successful.

13 HDMI IN 1/2 Sockets
14 HDMI OUT (ARC) Socket

1413

- 6 -

Remote Control

1 Switch the unit between ON and

STANDBY mode.

2 VOL+/VOL- Increase/decrease the volume level.

3 Function buttons Select the play function.

4 MUTE Mute or resume the sound.

5

H, G

Skip to previous/next track in

Bluetooth/USB mode.

6

BF

/

PAIR Play/pause/resume playback in

Bluetooth/USB mode.

Press and hold to activate the

pairing function in Bluetooth mode
or disconnect the existing paired
Bluetooth device.

7 EQ Select a preset sound effect.

Preparations

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.

•



Even if the Remote Control is operated within the effective range 19.7 feet (6m), remote control
operation may be impossible if there are any obstacles between the unit and the remote control.

•



If the Remote Control is operated near other products which generate infrared rays, or if other
remote control devices using infra-red rays are used near the unit, it may operate incorrectly.
Conversely, the other products may operate incorrectly.

• First-time use:

The unit has a pre-installed lithium CR2025 battery. Remove the
protective tab to activate the remote control battery.

Replace the Remote Control Battery

- The remote control requires a CR2025, 3V
Lithium battery.

1. Push the tab on the side of the battery tray
towards the tray.

2. Now slide the battery tray out of the remote control.

3. Remove the old battery. Place a new CR2025
battery into the battery tray with the correct
polarity (+/-) as indicated.

4. Slide the battery tray back into the slot in the remote control.

• Precautions Concerning Batteries

•

When the Remote Control is not to be used for a long time (more than a month), remove the

battery from the Remote Control to prevent it from leaking.

•

If the batteries leak, wipe away the leakage inside the battery compartment and replace the

batteries with new ones.

•

Do not use any batteries other than those specied.

•

Do not heat or disassemble batteries.

• Never throw them in re or water.

•

Do not carry or store batteries with other metallic objects. Doing so could cause batteries to short

circuit, leak or explode.

•

Never recharge a battery unless it is conrmed to be a rechargeable type.




















- 7 -

Placement and Mounting

• Normal Placement (place Soundbar on

leveled surface in front of TV)

Wall Mounting (if using option-B)

Note:

- Installation must be carried out by qualified personnel only. Incorrect assembly can result in severe personal

injury and property damage (if you intend to install this product yourself, you must check for installations
such as electrical wiring and plumbing that may be buried inside the wall). It is the installer’s responsibility to
verify that the wall will safely support the total load of the unit and wall brackets.

- Additional tools (not included) are required for the installation.

- Do not overtighten screws.

- Keep this instruction manual for future reference.

- Use an electronic stud finder to check the wall type before drilling and mounting.

1. Remove the screws from

the main unit.

2. Attach the wall brackets

to the main unit with the
screws removed from the
main unit.

3. Drill 2 parallel holes (Ø

3-8 mm each according to
wall type) in the wall. The
distance between the holes
should be 920 mm.

- Firmly fix 1 dowel into each

hole in the wall if necessary.

4. Leave a 5 mm gap between

the wall and the screw’s
head. Lift the unit with the
attached wall brackets over
the heads of the screws and
slot into place.

AB

920mm

920mm

1

3

2

> 32mm

4mm

5mm

4

- 8 -

Connections



56:/)'2





)5'>/'2

Use the OPTICAL Socket

• Remove the protective cap of the OPTICAL
socket, then connect an OPTICAL cable (not
included) to the TV’s OPTICAL OUT socket
and the OPTICAL socket on the unit.

Use the COAXIAL Socket

• You also can use the COAXIAL cable (not
included) to connect the TV's COAXIAL OUT
socket and COAXIAL socket on the unit.

• Tip: While in OPTICAL/COAXIAL mode,
if there’s no sound output from the unit

and the OPTICAL/COAXIAL lights flashes
quickly, you may need to activate PCM

or

Dolby Digital

Signal output on your source

device (eg. TV, DVD or Blu-ray player).

Use the AUX Socket

A. Use a RCA to 3.5mm audio cable (included)

to connect the TV’s audio output sockets to
the AUX 1 socket on the unit.

B. Use a 3.5mm to 3.5mm audio cable

(included) to connect the TV’s or external
audio device headphone socket to the AUX
1 socket on the unit.

.KGJVNUTK

Connections

HDMI socket

Using HDMI to connect the soundbar, AV equipment and TV:

TV

AV equipment

HDMI IN

HDMI (ARC)

OR

HDMI cable

(not included)

HDMI OUT

Method 1: ARC (Audio Return Channel)

- With the ARC (Audio Return Channel) function, it allows you to send audio from your

ARC-compliant TV to ARC-compliant audio devices (e.g. soundbar) without the need to connect
an HDMI cable.

- To enjoy the ARC function, make sure your soundbar's HDMI OUT socket is connected by an HDMI

1.4 cable to the HDMI OUT TV (ARC) socket of your ARC-compliant TV. Then, just use your TV
remote control to adjust the volume output (VOL +/– and MUTE) of the connected audio device.

Tips:

• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On.

• The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC

function, please refer to the owner’s manual.

• Only HDMI 1.4 cables can support the ARC function.

Method 2: Standard HDMI

- If your TV is not HDMI ARC-compliant, connect your soundbar to the TV through a standard HDMI

connection.

1. Use an HDMI cable (not included) to connect the soundbar's HDMI OUT socket to the TV’s HDMI
IN socket.

2. Use an HDMI cable (not included) to connect the soundbar's HDMI IN (1 or 2) socket to your
external devices (e.g. games consoles, DVD players and blu ray).

- 9 -

Connect Power

Risk of product damage!

- Ensure that the power supply voltage
corresponds to the voltage printed on the
back or the underside of the unit.

- Before connecting the AC power cord, ensure
you have completed all other connections.

Soundbar

• Connect the mains cable to the AC~ Socket
of main unit and then into a mains socket.

Subwoofer

• Connect the mains cable to the AC~ Socket of
the subwoofer and then into a mains socket.

Pairing the Wireless Subwoofer with the Main Unit

Automatic pairing

The subwoofer and soundbar will automatically pair when both units are plugged into the mains
sockets and turned on. No cable is needed for connecting the two units.

• When the subwoofer is pairing with the main unit, the Pair Indicator will flash fast.

• When the subwoofer is paired with the main unit, the Pair Indicator will light up.

NOTE:

- Do not press the Pair button on the rear of the subwoofer, except for manual pairing.

- If the automatic pairing fails, pair the subwoofer with the main unit manually.

Manual pairing

1. Ensure that all the cables are well connected and the main unit is in Standby mode.

2. Press and hold the Pair button on the rear of the subwoofer for a few seconds. The subwoofer will
enter the pairing mode and the Pair Indicator will blink quickly.

3. Press the button on the main unit or on the remote control to switch the main unit on.

4. After the wireless connection succeeded, the Pair Indicator will light up.

5. If the Pair indicator blinks, the wireless connection has failed. Unplug the cable of the subwoofer and
then reconnect the main cable after 3 minutes. Repeat step 1 ~ 4.

NOTE:

• If the wireless connection fails again, check if there is conict or strong interference

(for example, interference from an electronic device) around your location. Remove these conicts or

strong interferences and repeat the above procedures.

• The subwoofer should be within 6m (18 feet) of the soundbar in an open area.

• If a TV or an external device is connected, the main unit only AUX model and the subwoofer will
switch on automatically when the TV or the external device is switched on.

• If the main unit is not connected with the subwoofer and it is in On mode, the POWER Indicator will
ash. Follow step 1 ~ 4 above to pair the subwoofer to the main unit.

- 10 -

Basic Operation

Standby/ON

• When you first connect the unit to the main socket, the unit will be in STANDBY mode. The POWER
indicator will light up red.

• Press the button on the remote control to switch the main unit ON or OFF.

• Disconnect the main plug from the main socket if you want to switch the unit off completely.

- If a TV or an external device (Only for AUX socket) is connected, the unit will switch on
automatically when the TV or the external device is switched on.

- When the unit has no input signal for over 15 minutes, it will automatically switch to Standby
mode.

Select Modes

Press the SOURCE button on the unit repeatedly or press the AUX, BT (Bluetooth), OPTICAL,
COAXIAL, USB buttons on the remote control to select the desired mode.

• Red indicator: In STANDBY mode.

• Orange indicator: In Optical mode.

• Blue indicator: In Bluetooth mode.

• Green indicator: In AUX mode.
Orange flash: In Coaxial mode.

• White indicator: USB mode.

djust the Volume

- Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.

- If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE
button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume
normal listening.

- While adjusting the volume, the status indicator flashes quickly.

- While the volume level reaches its maximum level, if you press the VOL+ button again, the status
indicator flashes once. While the volume level reaches its minimum level, if you press the VOL-
button again, the status indicator flashes once.

Select a Preset Sound Effect

• While playing, press the EQ button on the unit or on the remote control to select between preset
equalisers: NEWS / MOVIE / MUSIC / SPORT EQ mode.

- NEWS: Green light flash

- MOVIE: Orange light flash

- MUSIC: Blue light flash

- SPORT: White light flash

AUX/OPTICAL/COAXIAL Operation

1 Ensure that the unit is connected to the TV or audio device.

2 While in ON mode, press the SOURCE button on the unit repeatedly or press the AUX, OPTICAL,

COAXIAL buttons on the remote control to select the desired mode.

3 Operate your audio device directly for playback features.

4 Press the VOL +/– button to adjust the volume to your desired level.

- 11 -

Tip:

• While in OPTICAL/COAXIAL mode, if there’s no sound output from the unit and the OPTICAL/
COAXIAL lights flashes quickly, you may need to activate PCM

or Dolby Digital

Signal output on

your source device (eg. TV, DVD or Blu-ray play

Bluetooth Operation

Pair Bluetooth-enabled Devices

The first time you connect your Bluetooth device to this player, you need to pair your device to this player.

Note:

- The operational range between this player and a Bluetooth device is approximately 8 meters

(without any object between the Bluetooth device and the unit).

- Before you connect a Bluetooth device to this unit, ensure you know the device’s capabilities.

- Compatibility with all Bluetooth devices is not guaranteed.

- Any obstacle between this unit and a Bluetooth device can reduce the operational range.

- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing

mode automatically.

1 While in ON mode, press the SOURCE button on the unit repeatedly or BT button on the remote

control to select Bluetooth mode. The Blue indicator will light flash.

2 Activate your Bluetooth device and select the search mode. “TH-M337B” will appear on your

Bluetooth device list.

- If you cannot find the unit, press and hold the "

BF

/PAIR" button on the remote control to be

searchable. After the “Pairing” voice prompt and the Blue indicator will flash rapidly.

3 Select “TH-M337B” in the pairing list. After the “Paired” voice prompt, the system is successfully

connected and the Blue indicator will light up solidly.

4 Begin playing music from the connected Bluetooth device.

To disconnect the Bluetooth function, you can :

- Switch to another function on the unit.

- Disable the Bluetooth function on your device.The device is successfully disconnected from the
unit after the “Disconnected” voice prompt.

- Press and hold the “

BF

/PAIR” button on the remote control.

Tips:

• Enter "0000" for the password if necessary.

• If no other Bluetooth device pairs with this player in 2 minutes, the player will reconnect to the
previous connection.

• The player will also be disconnected when your device is moved beyond the operational range.

• If you want to reconnect your device to this player, place it within the operational range.

• If the device is moved beyond the operational range, when it is brought back, please check if the
device is still connected to the player.

• If the connection is lost, follow the instructions above to pair your device to the player again.

Listen to Music from Bluetooth Device

- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can
listen to the music stored on the device through the soundbar'.

- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the
soundbar's remote control to play music stored on the device.

- 12 -

1. Pair your device with the player.

2. Play music via your device (if it supports A2DP).

3. Use supplied remote control to control play (if it supports AVRCP).

- To pause/resume play, press the

BF

/PAIR button on the remote control.

- To skip to a track, press the H,

G

buttons on the remote control.

USB Operation

1 Insert the USB device.

2 Press the SOURCE button on the unit repeatedly or press the BT button on the remote control to

select USB mode.

3 During playback:

- To pause or resume play, press the

BF

/ PAIR

button on the remote control.

- To skip to the previous/next le, press the H,

G

buttons on the remote control.

Tips:

• The unit can support USB devices with up to 32 GB
of memory.

• This unit can play MP3 / WAV.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems when
using this unit, review the following before requesting service.

• No power

Ensure that the AC cord is properly connected.
Ensure that there is power at the AC outlet.
Press standby button on the remote control or soundbar to turn the soundbar on.

• No sound

Increase the volume. Press Volume Up on the remote control or on the right side of the soundbar.
Press MUTE on the remote control to ensure the soundbar is not muted.
Press source buttons to select a different input source.
When using either of the Digital input, if there is no audio:

- Try setting the TV output to PCM or

- Connect directly to your Blu-ray/other source, some TVs do not pass through digital audio.

Your TV may be set to variable audio output. Conrm that the audio output setting is set to FIXED

or STANDARD, not VARIABLE. Consult your TV’s user manual for more detailed information.

If using Bluetooth, ensure that the volume on your source device is turned up and that the device

is not muted.

• Remote control does not work

Before you press any playback control button, rst select the correct source.

Reduce the distance between the remote control and the unit.
Insert the battery with its polarities (+/-) aligned as indicated.
Replace the battery.
Aim the remote control directly at the sensor on the front of the unit.

- 13 -

• Design and specifications are subject to change without notice.

• I hear buzzing or humming

Ensure all cables and wires are securely connected.
Connect a different source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does

not, the problem may be with the original device.

Connect your device to a different input on the soundbar.

• I can’t find the Bluetooth name of this unit on my Bluetooth device

Ensure the Bluetooth function is activated on your Bluetooth device.
Re-pair the unit with your Bluetooth device.

• This is a 15 mins power off function, one of the ERPII standard requirement for
saving power

When the unit's external input signal level is too low, the unit will be turned off automatically in15

minutes. Please increase the volume level of your external device.

• The subwoofer is idle or the indicator of subwoofer do not light up.

Please unplug power cord from the mains sockect, and plug it in again after 4 minutes to resent

the subwoofer.

Specifications

Sound Bar

Power Supply ...............................................................................................................................................AC120V~ 60Hz

Power Consumption ...................................................................................................................................................... 30 W

Output Power ............................................................................................................................................................ 30 W x 2

USB Socket ...............................................................................................................................................................

5V == 0.5A

Audio input sensitivity ............................................................................................................................................... 700mV

Frequency Response .................................................................................................................................. 120Hz - 20KHz

Unit Dimension (W x H x D)..............................................................................................................952 x 63 x 65.7 mm

Speaker Impedance ....................................................................................................................................................8 Ω x 2

Subwoofer

Power requirements .................................................................................................................................AC120V~ 60Hz

Power consumption .......................................................................................................................................................30 W

Output power ................................................................................................................................................................... 60 W

Frequency response ....................................................................................................................................40 Hz - 120 Hz

Impedance ............................................................................................................................................................................ 4 Ω

Dimension (W x H x D) ........................................................................................................................ 465 x 255 x 95 mm

Bluetooth

Version .................................................................................................................................................................................. V 4.2

Maximum power transmitted ..............................................................................................................................<20 dbm

Frequency bands............................................................................................................................2402 MHz ~ 2480 MHz

2.4G Hz Wireless Subwoofer

Maximum power transmitted .......................................................................................................................... <10 dbm

Frequency bands........................................................................................................................ 2400 MHz ~ 2483 MHz

Remote Control

Distance ................................................................................................................................................................................... 6m

Angle .......................................................................................................................................................................................30°

Battery Type .................................................................................................................................................................. CR2025