Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
Type1-Way Bass-Reflex Type (Magnetically Shielded Type)
Speaker8 cm cone × 1
Power Handling Capacity140 W
Impedance4 Ω
Frequency Range90 Hz to 20 000 Hz
Sound Pressure Level80 dB/W•m
Dimensions (W × H × D)98.5 mm × 214.5 mm × 93.5 mm
Mass1.0 kg each
Center speaker (SPTHD5C)
Type1-Way 2-Speaker Bass-Reflex Type (Magnetically Shielded Type)
Speaker8 cm cone × 2
Power Handling Capacity140 W
Impedance4 Ω
Frequency Range90 Hz to 20 000 Hz
Sound Pressure Level84 dB/W•m
Dimensions (W × H × D)435 mm × 99 mm × 93.5 mm
Mass2.0 kg
Surround speakers (SPTHD5S)
Type1-Way Bass-Reflex Type (Magnetically Shielded Type)
Speaker8 cm cone × 1
Power Handling Capacity140 W
Impedance4 Ω
Frequency Range90 Hz to 20 000 Hz
Sound Pressure Level76 dB/W•m
Dimensions (W × H × D)98.5 mm × 214.5 mm × 93.5 mm
Mass0.85 kg each
Designs & specifications are subject to change without notice.
(No.MB618)1-3
SECTION 1
PRECAUTION
1.1 Safety Precautions
(1) This design of this product contains special hardware and
many circuits and components specially for safety purposes. For continued protection, no changes should be made
to the original design unless authorized in writing by the
manufacturer. Replacement parts must be identical to
those used in the original circuits. Services should be performed by qualified personnel only.
(2) Alterations of the design or circuitry of the product should
not be made. Any design alterations of the product should
not be made. Any design alterations or additions will void
the manufacturers warranty and will further relieve the
manufacture of responsibility for personal injury or property
damage resulting therefrom.
(3) Many electrical and mechanical parts in the products have
special safety-related characteristics. These characteristics are often not evident from visual inspection nor can the
protection afforded by them necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Replacement parts which have these special
safety characteristics are identified in the Parts List of Service Manual. Electrical components having such features
are identified by shading on the schematics and by ( ) on
the Parts List in the Service Manual. The use of a substitute
replacement which does not have the same safety characteristics as the recommended replacement parts shown in
the Parts List of Service Manual may create shock, fire, or
other hazards.
(4) The leads in the products are routed and dressed with ties,
clamps, tubings, barriers and the like to be separated from
live parts, high temperature parts, moving parts and/or
sharp edges for the prevention of electric shock and fire
hazard. When service is required, the original lead routing
and dress should be observed, and it should be confirmed
that they have been returned to normal, after reassembling.
(5) Leakage shock hazard testing
After reassembling the product, always perform an isolation check on the exposed metal parts of the product (antenna terminals, knobs, metal cabinet, screw heads,
headphone jack, control shafts, etc.) to be sure the product
is safe to operate without danger of electrical shock.Do not
use a line isolation transformer during this check.
• Plug the AC line cord directly into the AC outlet. Using a
"Leakage Current Tester", measure the leakage current
from each exposed metal parts of the cabinet, particularly any exposed metal part having a return path to the
chassis, to a known good earth ground. Any leakage current must not exceed 0.5mA AC (r.m.s.).
• Alternate check method
Plug the AC line cord directly into the AC outlet. Use an
AC voltmeter having, 1,000Ω per volt or more sensitivity
in the following manner. Connect a 1,500Ω 10W resistor
paralleled by a 0.15µF AC-type capacitor between an ex-
posed metal part and a known good earth ground.
Measure the AC voltage across the resistor with the AC
voltmeter.
Move the resistor connection to each exposed metal
part, particularly any exposed metal part having a return
path to the chassis, and measure the AC voltage across
the resistor. Now, reverse the plug in the AC outlet and
repeat each measurement. Voltage measured any must
not exceed 0.75 V AC (r.m.s.). This corresponds to 0.5
mA AC (r.m.s.).
AC VOLTMETER
(Having 1000
ohms/volts,
or more sensitivity)
0.15 F AC TYPE
Place this
probe on
1500 10W
Good earth ground
1.2 Warning
(1) This equipment has been designed and manufactured to
meet international safety standards.
(2) It is the legal responsibility of the repairer to ensure that
these safety standards are maintained.
(3) Repairs must be made in accordance with the relevant
safety standards.
(4) It is essential that safety critical components are replaced
by approved parts.
(5) If mains voltage selector is provided, check setting for local
voltage.
1.3 Caution
Burrs formed during molding may be left over on some parts
of the chassis.
Therefore, pay attention to such burrs in the case of preforming repair of this system.
1.4 Critical parts for safety
In regard with component parts appearing on the silk-screen
printed side (parts side) of the PWB diagrams, the parts that are
printed over with black such as the resistor ( ), diode ( )
and ICP ( ) or identified by the " " mark nearby are critical
for safety. When replacing them, be sure to use the parts of the
same type and rating as specified by the manufacturer.
(This regulation dose not Except the J and C version)
each exposed
metal part.
1-4 (No.MB618)
1.5 Preventing static electricity
Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser
diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.
1.5.1 Grounding to prevent damage by static electricity
Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as laser products.
Be careful to use proper grounding in the area where repairs are being performed.
(1) Ground the workbench
Ground the workbench by laying conductive material (such as a conductive sheet) or an iron plate over it before placing the
traverse unit (optical pickup) on it.
(2) Ground yourself
Use an anti-static wrist strap to release any static electricity built up in your body.
(caption)
Anti-static wrist strap
1M
Conductive material
(conductive sheet) or iron palate
(3) Handling the optical pickup
• In order to maintain quality during transport and before installation, both sides of the laser diode on the replacement optical
pickup are shorted. After replacement, return the shorted parts to their original condition.
(Refer to the text.)
• Do not use a tester to check the condition of the laser diode in the optical pickup. The tester's internal power source can easily
destroy the laser diode.
1.6 Handling the traverse unit (optical pickup)
(1) Do not subject the traverse unit (optical pickup) to strong shocks, as it is a sensitive, complex unit.
(2) Cut off the shorted part of the flexible cable using nippers, etc. after replacing the optical pickup. For specific details, refer to the
replacement procedure in the text. Remove the anti-static pin when replacing the traverse unit. Be careful not to take too long a
time when attaching it to the connector.
(3) Handle the flexible cable carefully as it may break when subjected to strong force.
(4) I t is not possible to adjust the semi-fixed resistor that adjusts the laser power. Do not turn it.
1.7 Attention when traverse unit is decomposed
*Please refer to "Disassembly method" in the text for the pickup unit.
• Apply solder to the short land sections before the card wire is disconnected from the connecto on the servo board. (If the card wire
is disconnected without applying solder, the pickup may be destroyed by static electricity.)
• In the assembly, be sure to remove solder from the short land sections after connecting the card wire.
Solder short land section
(No.MB618)1-5
1.8 Important for laser products
1.CLASS 1 LASER PRODUCT
2.CAUTION :
(For U.S.A.) Visible and/or invisible class II laser radiation
when open. Do not stare into beam.
(Others) Visible and/or invisible class 1M laser radiation
when open. Do not view directly with optical instruments.
3.CAUTION : Visible and/or invisible laser radiation when
open and inter lock failed or defeated. Avoid direct
exposure to beam.
4.CAUTION : This laser product uses visible and/or invisible
laser radiation and is equipped with safety switches which
prevent emission of radiation when the drawer is open and
the safety interlocks have failed or are defeated. It is
dangerous to defeat the safety switches.
5.CAUTION : If safety switches malfunction, the laser is able
to function.
6.CAUTION : Use of controls, adjustments or performance of
procedures other than those specified here in may result in
hazardous radiation exposure.
!
Please use enough caution not to
see the beam directly or touch it
in case of an adjustment or operation
check.
REPRODUCTION AND POSITION OF LABELS and PRINT
WARNING LABEL and PRINT
1-6 (No.MB618)
SECTION 2
SPECIFIC SERVICE INSTRUCTIONS
This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS.
SECTION 3
DISASSEMBLY
3.1 Main body
3.1.1 Removing the METAL COVER (See Fig.1, 2)
(1) Remove the four screws A attaching the METAL COVER.
(See Fig.1)
(2) Remove the one screw B attaching the METAL COVER by
use TORX driver. (See Fig.1)
TROX driver: size T 10
Parts number: DR-L70
(3) Remove the two screws C attaching the both side of MET-
AL COVER. (See Fig.2)
AAB
Fig.1
3.1.2 Removing the REAR PANEL (See Fig.3)
(1) Remove the power cord from POWER BOARD assembly.
(2) Remove the two screws D attaching the TUNER PACK and
then disconnect the card wire from connector CN205
MAIN BOARD assembly.
(3) Remove the three screws E attaching the AMP BOARD as-
sembly.
(4) Remove the one screw F attaching the POWER BOARD
assembly.
(5) Remove the one screw G attaching the HDMI BOARD as-
sembly.
(6) Remove the six screws H attaching the each I/O jack.
(7) Remove the one screw J attaching the REAR PANEL.
of the
C
Fig.2
EGFD
J
H
Fig.3
CN205
(No.MB618)1-7
3.1.3 Removing the AMP BOARD assembly (See Fig.4)
(1) Disconnect the connector wire from POWER BOARD as-
sembly connected to connector CN501
BOARD assembly.
(2) Remove the two screws K attaching the HEAT SINK
BRACKET.
(3) Remove the three screws L attaching the AMP BOARD as-
sembly.
(4) Disconnect the CONNECTION BOARD assembly con-
nected connector CN504
3.1.4 Removing the DVD MECHANISM assembly (See Fig.5)
(1) Disconnect the connector wire from MAIN BOARD assem-
bly connected to connector CN811
sembly.
(2) Disconnect the card wires from DVD BOARD assembly
connected to connector CN201
MAIN BOARD assembly.
(3) Disconnect the card wire from DVD MECHANISM assem-
bly connected to connector CN212
assembly.
(4) Remove the one screw M attaching the DVD MECHANISM
assembly.
of the AMP BOARD assembly.
of the DVD BOARD as-
, CN202 and CN204 of the
of the AMP
of the MAIN BOARD
KL
M
Fig.4
CN811
CN504CN501
CN202
1-8 (No.MB618)
CN212
CN201
Fig.5
CN204
3.1.5 Removing the FRONT PANEL assembly (See Fig.6 to 8)
(1) Disconnect the card wire from FRONT PANEL assembly
connected to connector CN211
sembly. (See Fig.6)
(2) Remove the one screw N attaching the EARTH WIRE from
FRONT PANEL assembly. (See Fig.6)
(3) Remove the one screw P attaching the EARTH WIRE from
USB BOARD assembly. (See Fig.6)
(4) Remove the three screws Q attaching the FRONT PANEL
assembly. (See Fig.7).
(5) Disengage hook a of bottom side and two hooks b of the
both side of FRONT PANEL assembly. (See Fig.7, 8)
of the MAIN BOARD as-
CN211
NP
Fig.6
Q
hook b
hook a
Fig.7
Fig.8
(No.MB618)1-9
3.1.6 Removing the iPod BOARD assembly (See Fig.9)
(1) Disconnect the card wire from iPod BOARD assembly con-
nected to connector CN210
of the MAIN BOARD assem-
bly.
CN210
Fig.9
1-10 (No.MB618)
3.1.7 Removing the POWER BOARD assembly (See Fig.10 to 12)
(1) Disconnect the connector wire from POWER BOARD as-
sembly connected to connector CN151
BOARD assembly. (See Fig.10)
(2) Disconnect the connector wires from POWER TRANS-
FORMER connected to connector CN102
the POWER BOARD assembly. (See Fig.11)
(3) Remove the one screw R attaching the POWER BOARD
assembly. (See Fig.11)
(4) Remove the two screws S attaching the POWER BOARD
assembly. (See Fig.12)
(5) Disconnect the connector wire from POWER TRANS-
FORMER connected to connector CN104
BOARD assembly. (See Fig.11)
of the MAIN
and CN103 of
of the POWER
CN151
Fig.10
CN104
CN103
R
Fig.11
CN102
S
Fig.12
(No.MB618)1-11
3.1.8 Removing the MAIN BOARD assembly (See Fig.13)
(1) Disconnect the connector wire from Fan connected to con-
nector CN152
(2) Remove the four screws T attaching the MAIN BOARD as-
sembly.
3.1.9 Removing the USB BOARD assembly (See Fig.14)
(1) Remove the two screws U attaching the USB BOARD as-
sembly.
of the MAIN BOARD assembly.
CN152
T
Fig.13
1-12 (No.MB618)
U
Fig.14
3.1.10 Removing the VFD BOARD assembly (See Fig.15, 16)
(1) Remove the two screws V attaching the BRACKET
BOARD. (See Fig.15)
(2) Remove the two screws W attaching the HEAD PHONE
BOARD assembly. (See Fig.15)
(3) Disconnect the card wire from TOUCH BOARD assembly
connected to connector CN601
bly. (See Fig.16)
(4) Remove the two screws X attaching the LED BOARD as-
sembly. (See Fig.16)
(5) Remove the ten screws Y attaching the VFD BOARD as-
sembly. (See Fig.16)
3.1.11 Removing the TOUCH BOARD assembly (See Fig.17)
(1) Remove the three screws Z attaching the TOUCH BOARD
assembly.
of the VFD BOARD assem-
VW
Fig.15
CN601
YX
Fig.16
Z
Fig.17
(No.MB618)1-13
3.2 DVD mechanism
3.2.1 Removing the traverse mechanism
(See Fig.1 to 6)
(1) Remove the two screws A attaching the tramecha holder
from top side of DVD mechanism assembly. (See Fig.1)
(2) Remove the two screws B attaching the DVD module
board. (See Fig.2)
(3) Remove the four screws C attaching the CB holder and
take out it. (See Fig.3)
(4) Remove the four screws D attaching the traverse mecha-
nism. (See Fig.4)
(5) Solder the solder part of DVD pick up. (See Fig.5)
(6) Disconnect the card wire from CN101
DVD module board. (See Fig. 6)
Caution:
• Solder the short land section on the DVD pickup before dis-
connecting the card wire from the connector on the DVD
pickup. If the card wire is disconnected without attaching solders, the pickup may be destroyed by static electricity.
• When attaching the DVD pickup, be sure to remove solders
from the short land section after connecting the card wire to
the connector on the DVD pickup.
and CN201 on the
A
Clamper base
B
A
DVD mechanism assembly
Fig.1
DVD mechanism assembly
B
1-14 (No.MB618)
DVD module board
Fig.2
DVD module board
DVD module board
CN101
CN201
C
C
CC
Fig.3
DVD mechanism assembly
Traverse mechanism assembly
Fig.6
DD
Fig.4
Solder short land section
Fig.5
(No.MB618)1-15
3.2.2 Removing the pickup assembly
(See Fig.7 to 11)
(1) Remove the two rod springs pressing the guide shaft. (See
Fig.7)
(2) Remove the screw E and F attaching the spring holder.
(See Fig.8)
(3) Remove the read screw from traverse mechanism assem-
bly. (See Fig.9)
Caution:
When remove the lead screw, do not loss the middle
gear. (See Fig.10 and 11)
(4) Remove the bar spring pressing the shaft. (See Fig.10)
(5) Take out the pickup assembly from traverse mechanism
chassis by order. (See Fig.11)
(SHAFT)
(T.TABLE)
HOOK
(BAR SPRING)
Fig.10
ROD SPRINGROD SPRING
Fig.7
Spring holder
Fig.8
order 2
order 3
order 1
Fig.11
EF
Middle gear
Lead screw
Fig.9
1-16 (No.MB618)
3.2.3 Removing the feed motor assembly
(See Fig.12)
(1) Remove the one screw G attaching the feed motor assem-
bly.
(2) Remove the feed motor wires from solder part of spindle
motor board.
Splder part
3.2.4 Removing the spindle motor assembly
(See Fig.13)
(1) Remove the three screws H attaching the spindle motor
from spindle motor board.
Middle gear
Lead screw
Fig.12
H
Spindle motor
Fig.13
G
(No.MB618)1-17
3.2.5 Removing the tray assembly
(See Fig.14 & 15)
(1) Remove the two screws J attaching the clamper base.
(See Fig.14)
(2) Remove the one screw K attaching the shaft guide from
bottom side. (See Fig.14)
(3) Remove the two screws L attaching the shaft guide from
top side. (See Fig.15)
Caution:
When attach the tray assembly, boss of loading sub assembly
should attach to guide of bottom side at tray assembly. (See
Fig.15)
J
order 1
order 2
clamper base
L
K
Fig.15
[bottom side]
Fig.14
1-18 (No.MB618)
SECTION 4
ADJUSTMENT
4.1 ATTENTION IN SERVICE OF DVD SECTION
(1) When pickup, Flash ROM ,DVD module board were changed, initialize EEPROM by all means.
(2) When full initialization was executed, execute learning with a DVD test disc by all means.
Test disc : VT-501, VT-502
Learning method : It is adjusted automatically by normal playback of a DVD disc.
4.2 DVD TEST MODE
4.2.1 Content of correspondence TEST MODE
(1) Version, Region, Learning status check mode
(2) NORMAL initialize, FULL initialize
(3) Device key write(CPPM, CPRM)
(4) Device key checksum indication mode
(5) Micon version indication mode
(6) FL all on mode
(7) FRONT END check mode
4.2.2 Mode transition
TEST MODE into the press [SOURC key] and [POWER key] together of main body, connect the AC power.
After into the TEST MODE, mode select by [MENU key].
SOURCE+POWER+AC
Version, Region, Learning
status indication mode
F.SKIP key 4sec
FULL
initialize
long press
SOURCE keyB.SKIP
NORMAL
initialize
MENU key
Device key
write
MENU key
MENU keyMENU keyMENU key
Device key
checksum
mode
Micon version
indication mode
MENU key
FL all on
mode
FRONT END
check mode
4.2.3 Processing details
The communication of operated FL(LCD) display and DVD back end microcomputer is shown as follows.
*It is assumed to be OK to differ from the content of the specification because the number of digits is different according to the set for
the FL(LCD) display.
*It is assumed to be OK to differ from the content of the specification because it also has the relation between arrangement and presence by the set also for the key.
STEPOperationMovementRemarks
1
AC is pulled out, and
double press [SOURCE]
and [POWER] key of the
main body
2Keep step 1, connect AC
Version, Region, Learning
status indication mode
Power on by test mode,
version indication to FL
FL(LCD)indication
132465798
T
JC#
10121113
Version indication
The display to the version code is as
follows.
0x01:JC 0x02:1U 0x03:D 0x04:E
0x05:2U 0x06:3U 0x07:UB 0x08:UT
0x09:4U 0x0a:UY 0x0b:EE 0x0c:UF
Region indication (# part)
Learning from the back end is displayed
in the 11th digit and the 12th digit
of the FL display.
Blank indication at 0xFF
Study status (11th column)
0x07: BCA CHECK OK incomplete
DVD learning incomplete
CD learning incomplete (indication 7)
0x06: BCA CHECK OK incomplete
DVD learning complete
CD learning incomplete (indication 6)
0x05: BCA CHECK OK incomplete
DVD learning incomplete
CD learning complete (indication 5)
(No.MB618)1-19
STEPOperationMovementRemarks
132465798
FL(LCD)indication
10121113
0x04: BCA CHECK OK incomplete
DVD learning complete
CD leaning complete (indication 4)
0x03: BCA CHECK OK complete
DVD learning incomplete
CD learning incomplete (indication 3)
0x02: BCA CHECK OK complete
DVD learning complete
CD learning incomplete (indication 2)
0x01: BCA CHECK OK complete
DVD learning incomplete
CD learning complete (indication 1)
0x00: BCA CHECK OK complete
DVD learning complete
CD learning complete (indication 0)
(BCA READ CHECK result is only BCA
READ OK, it to complete)
Initialization status (12th column)
0X03: FULL initialize complete
(indication 3)
0x00: NORMAL initialize complete
(indication 0)
0xFF: Initialize incomplete
(blank indication)
Press a [SOURCE] key
of the main body.
NORMAL initialize
Continue pressing a
[F.SKIP] key of the main
body.(4sec)
FULL initialize
3
Press a [MENU] key of
the remote controller.
Press a [MENU] key of
the remote controller.
4Press a [MENU] key of
the remote controller.
5FL all on mode
Press a [MENU] key of
the remote controller.
6
Press a [MENU] key of
the remote controller.
Press a [1] key of the 10
key on remote controller
Press a [2] key of the 10
key on remote controller
Press a [3] key of the 10
key on remote controller
DEVICE CHECKSUM
indication mode
Indicate the CHECKSUM
of the Device key to FL
(4 byte)
Micon version indication
mode
Indicate the version to FL
All FL and all LED to ON
FRONT END check mode
Indicate the front end check
mode to FL
Disc startup and through
playback
(Playback starts from the
start position)
Presence of WOBBLE
0:WOBBLE_NO_CHECK
(un check)
1:WOBBLE_PRESS_MEDIA
(press)
2:WOBBLE_MINUS_MEDIA
(DVD-R/-RW media)
3:WOBBLE_PLUS_MEDIA
(DVD+R/+RW media)
Port check mode
(TRACK,INDEX,DEMP,
COPY)
1:INDEX Port = High
2:TRACK Port = High
3:COPY Port = High
4:DEMP Port = High
JC#T
JC#
T
bbcccac
CEHCK
CEHCK
The AVC protocol is returned from
high speed to normal speed.
(Return it to the normal mode when
coming off the TEST mode. )
Indicate CHECKSUM to FL
,,,
,,,
bb : Syscon Version
a : Syscon Romcorr Version
cccc: DVD Back end Version
Upper : 0
Lower : WOBBLE detection result
Upper : 0x01-0x04(check port number)
Lower : 0
,,,
: CPPM
: CPRM
: HDCP
1-20 (No.MB618)
STEPOperationMovementRemarks
Press a [4] key of the 10
key on remote controller
Press a [5] key of the 10
key on remote controller
Press a [6] key of the 10
key on remote controller
Press a [8] key of the 10
key on remote controller
Press a [9] key of the 10
key on remote controller
Press a [10] key of the 10
key on remote controller
Press a [0] key of the 10
key on remote controller
Press a [ 10] key of the
10key on remote controller
Press a [STOP] key of
the main body or remote
controller
Press a [OPEN/CLOSE]
key of the main body or
remote controller
Press a [PLAY] key of
the main body or remote
controller
Press a [MENU] key of
7
the remote controller
Press a [POWER] key of
the main body
*1 Mode toggle done by press [MENU] key.
*2 STEP3 are only for DVD-AUDIO or VR correspondence model.
CD_LD lights and laser
current is displayed
DVD_LD lights and laser
current is displayed
DVD_SL x1 jitter
measurement mode
Content of BACKUP
memory(0x00-0x63)
indication (FWD)
Temperature sensor
(AD value) indication
DVD-DL(parallel,opposite)
Search & jitter
measurement of the
specified position of
DVD-SL
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : 0
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : 0
Upper : Laser current value
(BACKUP value,Real measured value)
Lower : Real measured value
Upper Byte1 : Display option
0x00 : BACKUP area
0xFF : permanent area
Upper Byte2 : BACKUP memory address
(0x00-0x63)
Lower : Content of BACKUP memory
Upper : 0
Lower : Temperature sensor value
Upper : 0x00-0x06(measure at VT501)
Lower : Jitter value
Upper : 0x00-0x0C
Lower : 0
Upper:Laser current value
(BACKUP value, Real measured value)
Lower:Jitter value
Release at each step
(No.MB618)1-21
4.3 KEY special mode
MODE NAMEOPERATIONSTATUSFUNCTION
TUNER 9K/10kHz
select (U ver)
P. O F F
P. O F F
TRAY LOCK
DVD TEST mode
XM Diagnostic mode
P. O F F
AC off
P.OFF at XM
4.4 REMOCON KEY special mode
Change to 9kHz step by
press and hold [+] key,
then press [|<<] key.
Change to 10kHz step by
press and hold [+] key,
then press [>>|] key.
Press and hold [+] key,
then press [EJECT] key
Press and hold
[SOURCE] and [POWER]
key, and connecto to AC.
Press and hold [-] key,
and press [POWER] key
TUNER AM 9kHz/10kHz step select.
Indicate "9k STEP", "10k STEP".
Do the TRAY LOCK mode select. Done the tempolary
P.ON process, select the "LOCKED" and "UNLOCKED"
(Do no done the P.ON process).
Ended the transitory display (2 seconds) return to
P.OFF mode.‘
When press the [EJECT] key at LOCK mode, at P.OFF
status do templary P.ON process then the transitory display
(2 seconds) the "LOCKED", at P.ON status do the transitory
display (2 seconds) the "LOCKED".
DVD backend started by TEST mode.
Internal TEST mode process is refer the spec.
Into the XM Diagnostic mode.
MODE NAMEOPERATIONCODEFUNCTION
COLD START
[STOP] +
[POWER] + [0]
2 times input at P.OFF
When Fix by 2 times input, do the templary P.ON process
then indicate "COLD SET" by transitory (2 seconds).
Ended the indication, change to P.OFF mode.
FL all ON
Write the preset
frequency
[STOP] +
[POWER] + [1]
Input at P.ON
Write the preset frequency, LED all on check (each 300ms),
FL all on
LED on order : STANDBY -> ILLUMI ->
Volume control by [VOL+] and [VOL-] key of the remote
controller, it should high speed mode until next POWER OFF.
Version indication
[STOP] +
[POWER] + [10]
Input at P.ON
Syscon version indication -> Unit version indication
-> destination -> Chip select transitory indication (5 seconds).
Syscon version: "SC ## $$"
(## : Syscon version, $ : Syscon romcollection)
Unit version: "BE %%%%" (%%%% : Unit version)
Destination, Chip select: "$$ %% KX"
($$ : Syscon destination, %% : "D4" or "D5" or "D6" or "D7"
or "D8", K : KARAOKE, X : XM READY)
XM TEST MODE
[STOP] +
[POWER] + [5]
Input at XM SOURCE
XM ready test mode
TEST TONE (L/R 1 kHz) output
1-22 (No.MB618)
4.5 TH-D SPECIAL MODE Ver 0.2
POWEREJECTB.SKIPF.SKIPSOURCE
MODEOPERATIONSET STATUSKEY1
DVD TEST MODE
TRAY LOCK
TUNE 9K
TUNE 10K
NORMAL INITIALIZE
FULL INITIALIZE
This service manual does not describe TROUBLESHOOTING.
AC OFFSOURCE
STANDBY
STANDBY
STANDBY
TEST MODE
TEST MODE
Press and keep [+] key
Press and keep [+] key
Press and keep [+] key
SOURCE
F.SKIP
SECTION 5
TROUBLESHOOTING
KEY2
POWER
EJECT
B.SKIP
F.SKIP
+
AC IN
Press
Press 4 seconds.
(No.MB618)1-23
Victor company of Japan, Limited
Audio/Video Systems category 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan
(No.MB618)
Printed in Japan
VPT
SCHEMATIC DIAGRAMS
DVD DIGITAL CINEMA SYSTEM
TH-D5B,TH-D5E,TH-D5EN
TH-D5EV
CD-ROM No.SML200707
SP-THD5W
SP-THD5S
SP-THD5C
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
Contents
Block diagrams
Standard schematic diagrams
Printed circuit boards
SP-THD5F
XV-THD5
2-1
2-2
2-14 to 18
COPYRIGHT 2007 Victor Company of Japan, Limited.
No.MB618SCH
2007/7
In regard with component parts appearing on the silk-screen printed side (parts side) of the PWB diagrams, the
parts that are printed over with black such as the resistor ( ), diode ( ) and ICP ( ) or identified by the " "
mark nearby are critical for safety.
CAPACITANCE( uF)ALL E.CAPACITORS ARE SHOWN IN THE FORM
NOTES
UNLESS OTHERWISE SPECIFIED.
METAL GLAZE RESISTOR.
disc
,50V
ALL RESISTORS ARE
16V
DVD
ARE IN uH(m=mH).
A1
uF(p=pF).ALL CAPACITANCE VALUES ARE IN
/RATED VOLTAGE (V).
6.3V
and mode .the
IN OHM( ).
in
,2.or
ALL RESISTANCE VALUES ARE
WITHOUT INPUT SIGNAL.
0.5%5%
VOLT METER
ALL CAPACITORS ARE
Tray
,
.
METAL GLAZE RESISTOR.
CONDITION ---
S1
CN1
QSW1074-001
QGF1016F3-05
2-14
Main board
(Main board)
(USB jack board)
(iPod jack board)
(Touch board)
Printed circuit boards
C6401
C6403
C6405
D6801
D6802D6803
Q6801
Q6802
Q6803
R6403
R6404
R6801
R6802
R6803
CN641
C1501
C1611
C1613
C1622
C1701
C1702
C1802
C1901
C1902
C2103
C2201
C2202
C2301
C2302
C2303
C2401
C2402
D1801
R2902
R2903
R2904
R2905
C2603
C2701
C2702
C2703
C2901
C3001
C3002
C3003
C3004
C3005
C3006
C3007
C3008
C3201
C3202
C3203
C3204
C3205
C3206
C3207
C3208
C3209
C3210
C3211
C3212
C3213
C3214
C3215
C3216
C3217
C3218
C3219
C3220
C3221
C3222
C3223
C3224
C3225
C3226
C3227
C3228
C3229
C3230
C3231
C3232
C3233
C3234
C3301
C3302
C3303
C3304
C3305
C3306
C3307
C3401
C3501
C3502
C3503
C3504
C3505
C3506
CN301
R3808
R3809
R3810
R3811
R3812
C3701
C3702
C3901
C3902
C3903
C3904
C3905
C3906
C4001
C4002
C4101
C4102
C4103
C4602
C4201
C4202
C4203
C4204
C4205
C4206
C4207 C4208 C4209
C4210
C4211
C4212
C4213
C4304
C4308
C4401
C4411
C4501
C4511
C4601
C4104
CN151
CN152
CN201
CN202
CN203
CN204
CN205
C3802
CN207
CN208
CN209
CN210
CN211
CN212
CN213
R3607
R3608
R2187
D1613
D1614D1615
D1621
D1622
D2001
D2002
D2003
D2005
D2201
D2301
IC161
IC162
IC211
IC212
IC241
IC261
IC301
IC321
IC331
IC361
IC362
IC363
IC381
IC382
IC411
IC412
IC421
IC461
CP161
J3002
J4001
J4002
J4003
J4004
K1611
K2201
L1611
L4201
D1628
Q1701
R2186
HS181
Q1903
Q2001
Q2002
Q2201
Q2301
R2912
R2913
Q2701
Q3001
Q3002
Q3401
Q3501
Q3502 Q3503
Q4601
R2178
R2179
R1701
R1801
R2180
R2181
C4105
R1903
R2001
R2002
R2003
R2101
R2102
R2103
R2104
R2105
R2106
D1624
R2108
R2109
R2110
R2111
R2112
R2113
R2114
R2115
R2116
R2117
R2118
R2119
R2120
R2121
R2122
R2123
R2124
R2125
R2126
R2128
R2129
R2130
R2131
R2132
R2133
R2134
R2135
R2136
R2137
R2138
R2139
R2141
R2142
R2143
R2144
R2145
R2146
R2147
R2148
R2149
R2150
R2151
R2152
R2153
R2154
R2155
R2156
R2157
R2158
R2159
R2202
R2203
R2301
R2302
R2401
R2402
W3006
W3007
R2911
Q3532
R2191
R2192
R3003
R3005
R3006
R3007
R3008
R3009
R3010
R3011
R3012
R3015
R3016
R3201
R3202
R3213
R3214
R3215
R3301
R3302
R3303
R3304
R3305
R3306
R3307
R3308
R3309
R3507
R3508
R3509
R3510
R3511
R3512
R3513
R3514
R3515
R3516
R3517
R3518
C3803
C3804
C3805
C3806
R2177
EP151
CN302
W3011
R1706
IC181
C4106
C4107
C4109
R3601
R3602
R3604
R3605
R4011
R4012
R4021
R4022
R4031
R4032
R4041
R4042 R4051
R4052
R4604
R4605
R4606
R4607
R4608
R4609
R4610
R4601
RA212
RA213
RA214
RA215
RA216
RA217
RA218
X2101
HS171
HS162
HS161
PP151
D1625
D1626
D1627
C4108
C4110
C4112
W2001
C4115
R4602
R4603
R3609
R3807
C3801
R2168
R2169
R2170
R2171
PP152
R2182
R2185
EP161
R4611
R3823
R3819
R3821
R3826
R3828
R3830
R3820
R3822
R3824
R3827
R3829
R3831
W3010
C2801
C2802
C2803
C2804
C2805
R2010
W3001
R3538
R3539
W3002
R2189
R2190
Q2101
CN305
D1612
C1804
IC351
R3533
C3533
C3531
C3532
C3534
R3534
C3551
J3001
R3542
C3542
R3541
C3541
C3543
R3543
C3552
C3535
C3544
R3535
R3544
Q3531
R3101
PP153
PP154
Q3541
C3536
R3537
D2103
R3545
C3545
R3546
D2104
R1905
Q1904
Q1905
D1902
C2909
C1624
R2901
CN304
W3003
W3004
W3005
W7001
CN751
J7501
CN761
J7601
W7601
forward side
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
2-15
Main board
(Main board)
(USB jack board)
(iPod jack board)
(Touch board)
reverse side
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
C6402
C6404
C6501
C6502
C6503
C6601
C6602
C6603
C6701
C6702
C6703
IC641
IC642
Q6401
Q6402
Q6501
Q6601
Q6701
R6401
R6402
R6405
R6406
R6407
R6408
R6409
R6410
R6411
R6412
R6413
R6414
R6501
R6502
R6503
R6504
R6601
R6602
R6603
R6604
R6701
R6702
R6703
R6704
R6505
R6605
R6705
C6504
C6604
C6704
C1501
C1611
C1612
C1613
C1614
C1621
C1622
C1623
C1701
C1702
C1801
C1802
C1901
C1902
C2101
C2102
C2104
C2201
C2301
C2302
C2401
R3540
R3547
D1801
C2601
C2602
C2603
C2701
C2702
C2703
C2901
C2902
C2903
C2904
C3001
C3002
C3003
C3007
C3008
C3205
C3206
C3207
C3208
C3209
C3211
C3212
C3213
C3214
C3216
C3217
C3218
C3219C3220
C3224
C3227
C3228
C3229
C3230
C3231
C3232
C3233
C3234
C3301
C3303
C3305
C3306
C3401
C3501
C3502
C3503
C3504
C3505
C3506
CN301
R3813
R3814
R3815
R3816
R3817
R3818
C3601
C3701
C3702
C3703
C3704
C3901
C3902
C3903
C3904
C3905
C3906
C3907
C3908
C3909
C3910
C3911
C3912
C4101
C4602
C4201
C4206
C4210
C4211
C4212
C4301
C4302
C4303
C4304
C4305
C4306
C4307
C4308
C4309
C4310
C4311
C4312
C4313
C4314
C4315
C4401
C4402
C4411
C4412
C4501
C4502
C4511
C4512
C4531
C4532
C4533
C4534
C4104
CN151
CN152
CN203
CN205
C3802
CN207
CN208
CN209
CN210
CN211
CN212
CN213
D1611
D1613
D1614
D1615
D1621
D1622
D1701
C1803
D1901
D2001
D2004
D2006
D2007
D2101
D2102
D2601
D2701
D2702
D2703
IC161
IC162
IC261
IC291
CP161
J3002
J4001
J4002
J4003
J4004
K1611
K2201
K3601
L1611
L4201
D1628
Q1611
Q1701
Q1702
HS181
Q1901
Q1902
Q1903
Q2701
Q2702
Q4521
Q4522
Q4523
Q4524
Q4525
R1501
R1611
R1612
R1613
R1614
R1701
R1702
R1703
R1704
R1705
R1801
R3401
R1901
R1902
R1903
R1904
R2004
D1624
R2127
R2160
R2161
R2162
R2163
R2164
R2165
R2166
R2167
R2201
R2914
R2915
W3006
W3007
R2701
R2702
R2703
R2704
R2801
R2802
R2803
R3004
R3013
R3014
C2105
R3203
R3204
R3205
R3206
R3207
R3208
R3209
R3210
R3211
R3212
R3216
R3217
R3218
R3501 R3502R3503
R3504
R3505
R3506
C3803
C3804
C3805
C3806
R2173
R2174
R2175
R2176
R4524
R4525
EP151
CN302
R4612
W3011
R1706
IC181
R3606
R3701
R3702
R3703
R3704
R3901
R3902
R3903
R3904
R3905
R3906
R3907
R3908
R3909
R3910
R3911
R3912
R4301
R4302
R4303
R4304
R4305
R4306
R4307
R4308
R4309
R4401
R4402
R4411
R4412
R4501
R4502
R4511
R4512
R4521
R4522
R4523
R4531
R4532
R4533
R4534
R2204
TPC1
TPHPL
TPHPR
TPL1
TPR1
TPSL1
TPSR1
TPSW1
X2101
HS171
HS162
HS161
PP151
R4403
R4413
D1625
D1626
D1627
C4111
C4113
C4114
W2001
R3801
R3802
R3803
R3804
R3805
R3806
R3017
R3018
C3801
R2172
PP152
R2183
R2184
EP161
R2205
W3010
R2010
R2916
W3001
W3002
IC292
CN305
D1612
C1804
R3531
C2906
R3532
C3531
C3532
C3551
R3552
R3551
J3001
C2907
C2908
C3541
C3535
C3544
D3531
D3541
R3101
PP153
PP154
R3536
C3536
C3545
R2188
C2909
C1624
C3603
CN304
W3003
W3004
W3005
C7501
C7502
C7503
C7504
W7001
CN751
D7501
D7502
J7501
K7501
K7502
K7503
K7504
C7505
C7506
R7612C7601
C7602
C7603
C7604
C7605
C7606
C7607
C7608
C7609
R7610
CN761
R7608
R7609
R7611
J7601
K7601
K7602
K7603
K7604
K7605
K7606
R7601
R7602
R7603
R7604
R7605
R7606
R7607
R7613
W7601
2-16
Power board
(Power board)
(LED board)
(Connection board)
(VFD board)
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
C1001
C1101
C1102
C1103
C1104
C1105
C1201
C1202
C1212
C1204
C1205
C1206
C1207
C1002
C1003
C1301
C1302
FC131
C1401
C1402
C1403
C1404
C1405
CN101
CN103
CN104
CN105
CN106
D1001
HS101
D1105
D1106
D1107
D1201D1202
D1301
D1302
D1401
D1402
FC101
FC102
FC121
FC122
FC123
FC124
IC111
Q1001
Q1101
Q1401
Q1402
R1001
R1101
R1102
R1401
R1402
R1403
R1404
R1405
RY101
T1101
HS111
EP101
HS121
FC132
FC133
FC134
C1208
C1203
C1209
D1101
D1102
D1103
D1104
C1210
C1211
C1213
C1303
D1108
R1002
CN102
C6001
R6103
C6003
C6005
C6006
C6007
W601
C6101
C6102
CN601
CN602
FW603
CN604
FW605
D6101
D6102
DI601
IC601
IC611
R6001
R6002
R6003
R6004
R6101
R6102
R6201
R6202
R6203
R6204
R6205
S6201S6202
S6203
S6204
S6205
S6206S6207
WC601
R6005
R6105
R6104
Q6101
R6107
C6103
R6106
Q6102
R2505
R2504
R2506
R2501
Q2501
C2502
C2503
R2502
R2503
C2501
C2511
R2513
R2512
R2511
R2516
C2513
C2512
Q2511
R2515
R2514
R2525
R2524
Q2521
R2526
R2521
R2522
R2523
C2521
C2523
C2522
FW615
D6301
R6301
C6301
C7002
C7003
C7004
C7005
C7006
FW613
J7001
K7001
K7002
K7003
K7004
R7001
R7002
R7003
W702
W701
CN514
CN524
R7611
C7604
R7603
C7605
K7604
K7605
R7609
C7606
R7608
C7602
K7606
C7607
C7608
R7613
C7625
CN761
R7627
C7609
R7610
C7621
J7601
R7618
C7610
C7614
C7619
C7612
C7617
R7614
IC761
C7623
R7626
R7624
C7616
R7616
C7618
R7615
R7628
C7624
R7619
C7615
C7613
R7620
R7621
R7617
R7625
C7611
C7620
C7622
C7629
R7631
C7637
R7636
C7631
C7634
C7638
R7640
C7635
R7634
R7637
R7630
C7636
R7632
C7632
C7630
IC762
R7639
R7633
R7638
R7635
C7603
C7628
C7601
C7627
R7629
C7640
C7639
C7633
R7606
R7605
(iPod control board)
(Headphone board)
2-17
Amp board
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
C5001
C5002
C5003
C5004
C5005
C5006
C5007
C5101
C5102
C5103
C5104
C5105
C5201
C5202
C5203
C5204
C5205
C5301
C5302
C5303
C5304
C5305
C5401
C5402
C5403
C5404
C5405
C5501
C5502
C5503
C5504
C5505
C5601
C5602
C5603
C5604
C5605
D5702
C5801
C5802
C5901
C5911
C5912
C5913
C5914
C5921
C5922
C5923
C5924
C5931
C5932
C5933
C5934
C5941
C5942
C5943
C5944
C5951
C5952
C5953
C5954
C5961
C5962
C5963
C5964
CN501
CN504
Q5804
D5804
D5001
D5002
D5003
D5004
D5005
D5006
D5101
D5201
D5301
D5401
D5501
D5601
D5701
D5801
D5802
D5803
EP501
IC501
IC502
J5001
L5101
L5201
L5301
L5401
L5501
L5601
Q5101
Q5201
Q5301
Q5401
Q5501
Q5601
D5805
Q5801Q5802 Q5803
Q5901
R5001
R5002
R5003
R5004
R5811
R5101
R5102
R5103
R5104
R5105
R5106
R5107
R5108
R5201
R5202
R5203
R5204
R5205
R5206
R5207
R5208
R5301
R5302
R5303
R5304
R5305
R5306
R5307
R5308
R5401
R5402
R5403
R5404
R5405
R5406
R5407
R5408
R5501
R5502
R5503
R5504
R5505
R5506
R5507
R5508
R5601
R5602
R5603
R5604
R5605
R5606
R5607
R5608
R5701
R5812
R5813
R5814
R5801
R5802
R5803
R5804
R5805
R5806
R5807
R5808
R5809
R5810
R5901
R5902
R5903
R5911
R5921
R5931
R5941
R5951
R5961
RY591
RY592
RY593
R5010
R5007
D5007
R5008
R5009
R5011
R5012
R5013
R5014
R5005
D5008
R5006
R5109 C5106
C5107
R5110
R5209
C5206
TH581
C5207
R5210
R5309
C5306
C5307
R5310
R5409
C5406
C5407
R5410
R5509
C5506
C5507
R5510
R5609
C5606
C5607
R5610
L5921
W5010
W5001
L5911
L5931
L5941
L5951
L5961
Q5902
R5904
R5905
W5003
W5004
W5005
W5002
R5021
R5022
R5023
R5024
W5007
W5006
W5008
W5009
R5015
C5803
2-18
DVD board
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
Loader board
Lead free solder used in the board (material : Sn-Ag-Cu, melting point : 219 Centigrade)
Lead free solder used in the board (material : Sn-Cu, melting point : 230 Centigrade)
L301
R373
R206
C211
C318
C108
R340
R220
R204
C339
R113
R107
R112
R214
C261
C107
C353
C337
C217
C356
C204
R306
R106
R339
C260
CN301
R104
R338
R221
C103
C338
C333
R116
C341
R108
R259
C101
C331
C314
C263
C206
R114
R205
R372
R341
C301
R103
C106
C205
R101
C264
R342
R125
R213
C102
R109
C262
R110
C104
R309
C332
Q102
C319
R251
TH301
R392
R257
R115
R105
R207
C354
CN201
D301
C316
C350
CN101
C357
C358
R369
C347
R921
R922
K101
IC510
C336
C564
R541
R307
R370
TP302
TP303
R131
R129
R374
R364
R365
R354
R355
R356
R542
R305
R300
R301
R302
C706
R726
C741
IC453
K708
R722
K707
C728
K759
R731
C563
C745
K711
R732
K709
R458
K722
C702
K721
C742
R462
K763
K710
C557
K756
IC509
K705
R701
K761
C455
K726
C555
K702
C551
C709
R729
CN704
K703
R720
K754
K762
C561
C704
C708
K753
C558
K751
K501
C707
R535
K704
C743
C559
R741
R742
K706
C744
K765
K701
C703
R530
R730
C560
C701
C554
C562
K755
IC505
R531
CN701
R859
IC801
C801
C802
C804
R861
C803
IC891
R891
R892
C891
R860
Q801
R908
K903
C916
K902
K904
C931
K905
C934
IC902
C921
C914
C901
C927
C990
C991
K911
C999
R990
R991
R999
C976
C977
R909
R910
K906
C922
R967
R968
R970
R971
R979
R980
R981
C902
R923
R924
R951
C903
IC905
R394
R395
R396
R397
R343
R344
R349
R350
R393
R304
X301
TP292
C322
C325
R384
R353
R308
TP109
TP118
C335
C324
R359
TP111
R111
R117
TP112
C334
R323
C203
C386
Q104
R333
TP101
R127
TP205
C323
R346
C383
C307
R345
TP121
R326
C348
C201
R128
TP332
C310
C202
TP316
C393
R357
R385
R311
C309
R336
TP381
TP107
C321
TP326
TP331
C374
TP116
K352
IC201
TP122
C375
TP106
R360
Q103
TP220
TP206
C290
R376
TP103
TP119
C379
R351
TP207
R358
R352
TP227
R202
TP104
R325
R361
TP201
C343
Q101
C256
TP337
C345
C340
TP226
C378
R219
TP333
R290
C352
C305
TP108
C344
C349
R303
R363
TP202
C377
TP231
TP204
R367
TP327
TP329
R324
C258
C210
TP117
TP105
C306
TP221
C373
R335
C313
TP203
R102
C105
TP291
C371
TP328
C342
TP110
C315
TP115
TP120
C259
C372
TP330
R310
TP123
C330
TP208
TP315
C326
C320
R118
R383
R347
C251
TP102
R362
C257
C351
C312
R312
R322
R201
R316
R368
IC301
R375
C302
R348
R337
R334
C392
C391
TP324
TP323
TP321
IC302
C304
C359C328
C303
K354
R318
X302
IC303
C370
K353
TP334
TP338
R371
R314
TP300
TP301
R132
R377
K370
R382
R386
R387
R388
R389
R390
K362
K363
K364
K365
K366
K367
R380
R381
K360
K361
TP339
R327
K355
TP340
TP341
TP342
TP343
TP344
TP345
TP346 TP347
R332
R727
IC707
R724
IC704
TP725
R714
C381
R399
IC705
TP717
C714
C755
TP718
TP380
TP705
TP703
TP724
C754
TP722
TP748
C753
K713
IC701
TP753
C721
R728
R719
TP721
IC703
R718
TP707
R711
IC305
TP755
C756
TP702
R721
TP709
TP741
C715
TP746
K720
TP711
TP749
K712
TP750
K351
TP701
R716
TP747
C712
TP716
R712
C380
TP743
R713
R723
TP742
R715
C752
C740
C713
TP744
R725
IC702
TP710
IC706
TP745
TP708
C711
TP752
C382
TP714
TP720
TP713
TP751
TP761
TP719
R740
TP723
CN712
K714
TP727
TP726
TP467
IC512
IC513
C552
C553
CN702
R811
R814R813
R812
TP803
K811
K812
TP802
TP801
TP814
TP812
TP811
TP813
D811 D812
CN811
TP819
R819
C819
TP940
TP931
R937
L902
TP904
TP936
R939
TP934
L904
D902
Q903
C933
C930
R943
R942
C929
C928
R933
L903
TP933
R941
R938
L901
D901
TP932
Q902
IC906
D903
R934
TP930
TP935
C950
TP939
R944
R940
TP937
TP927
Q901
TP911
TP912
J801
TP902
TP941
K912
K913
TP999
CN801
TP952
TP951
TP956
TP955
TP954
TP953
CN802
R915
R914
TP913
TP914
TP915
IC901
C951
C952 C953
C954
C955 C956
C957
C958
C959
C960
C961
C962
C963
C964
C932 C965
C966C967
C968
C969
C970
C971
C972
C973
C974
C975
R950
R969
TP903
R952
TP901
R973
R974
R975
R976
R977
R978
C905
C906
R992
C978
C979
TP929
TP928
TP905
TP906
TP907
R982
TP908
TP909
R972
TP738
TP739
TP740
TP960
TP961
TP962
TP963
TP964
TP965
TP966
TP967
TP968
TP969
TP970
TP971
TP972
TP973
TP974
TP975
TP976
TP977
TP978
TP979
TP980
TP981
TP982
TP983
TP984
TP985
R378
R379
R130
C291
R291
TP293
TP294
CN901
S1
CN1
forward side
reverse side
< MEMO >
Victor Company of Japan, Limited
Audio/Video Systems Category 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan
(No.MB618SCH)
Printed in Japan
VPT
3-1
PARTS LIST
* All printed circuit boards and its assemblies are not available as service parts.
- Contents -
Exploded view of general assembly and parts list (Block No.M1)
DVD mechanism assembly and parts list (Block No.MJ)
DVD loading base assembly and parts list (Block No.MN)
Electrical parts list (Block No.01~05)
Packing materials and accessories parts list (Block No.M3)
TH-D5B,TH-D5E,TH-D5EN
TH-D5EV
3- 2
3- 6
3- 8
3-10
3-20
MB618
3-2
Exploded view of general assembly and parts list
Block No.
M
M
M
1
A
B
C
D
G
F
D
b
f
p
p
c
c
d
t
t
d
Touch board
VFD board
Head phone board
iPod board
e
m
u
u
LED board
USB board
b
jj
65
66
75
63
39
74
27
2
25
28
76
27
61
37
32
12
13
10
11
11
3
88
5
11
9
12
85
86
12
8
8
15
7
4
64
2
26
15
12
12
6
1
67
12
65
12
12
12
12
89
12
12
30
87
72
73
43
43
67
11
77
23
38
43
3-3
M
A
B
B
C
C
E
G
G
E
F
D
a
x
a
b
f
p
f
c
d
t
d
D board
Main board
AMP board
Power board
e
g
r
r
s
g
h
e
h
j
v
k
k
m
n
j
y
The parts without symbol number are not service.
z
s
ss
ss
m
jj
27
24
22
24
27
28
28
31
25
28
76
27
61
37
27
41
89
28
42
14
15
40
68
40
40
27
20
15
61
80
27
21
35
83
41
32
12
31
71
27
59
69
55
52
46 47 54
48
49
45
50
57
56
51
59
19
17
16
29
25
34
60
62
18
89
89
44
33
70
12
12
89
12
30
87
72
73
23
81
82
84
35
36
90
38
58
78
53
25
79
3-4
General Assembly
Block No. [M][1][M][M]
Symbol No.Part No.Part NameDescriptionLocal
1GN10122-003AFRONT PANEL1A
2GN10123-018AARNAMENT
3GN20231-001APUSH BUTTON
4GN20233-005AWINDOW SCREEN
5LV42851-012AFL SCREEN
6GN30223-003ALENS
7LV30227-0A7ASPACER
8QYSDSF2608ZATAP SCREWM2.6 x 8mm(x2)
9GN40140-001ALENS(DVD)
10GN40152-001ASENSOR SPACER
11QYSDSF2608ZATAP SCREWM2.6 x 8mm(x4)
12QYSDSF2608ZATAP SCREWM2.6 x 8mm(x15)
13QYSDSG2606EATAP SCREWM2.6 x 6mm(x3)
14GN10124-003ABOTTOM CHASSI
15LV40301-002AFELT SPACER(x4)
16GN20234-201AHEAT SINK
17LV30227-0A1ASPACER(x2)
18GN20235-002ABRACKET(IC)
19GN20236-001ABRACKET(H.SINK)
20GN30224-001ABRACKET(POWER)
21GN30228-002APOWER BRACKT
22GN30225-201ABRACKET(FAN)
23GV30349-025ASPACER
24LV30226-037ASPACER(x2)
25GV30349-025ASPACER(x3)
26QYSDSG3008ZATAP SCREWM3 x 8mm(x3)
27LV43451-002ASPECIAL SCREW(x10)
28QYSDSG3006EATAP SCREWM3 x 6mm(x5)
29QYSBSG3010EATAP SCREWM3 x 10mm(x2)
30GV30349-025ASPACER
31QYSBSG3020ZATAP SCREWM3 x 20mm(x3)
32QYSDSG3008ZATAP SCREWM3 x 8mm
33QYSBSG3030ZATAP SCREWM3 x 30mm(x2)
34QYSBSG3010ZATAP SCREWM3 x 10mm(x3)
35QYSDSG3008ZATAP SCREWM3 x 8mm(x2)
36QYWBS326505ZAWASHER6.5mm/3.2mm x 0.5mm
37GN40145-001ABRACKET(x2)
38GN40146-001ABRACKET
39QYSBSG3016EATAP SCREWM3 x 16mm
40LV44937-001ASPACER(x4)
41QYSDSTL4008EATAP SCREWM4 x 8mm(x4)
42LV30227-092ASPACER
43VYSH101-009SPACER(x3)
44GN20237-027AREAR PANEL
45QYSBSGY3008EATAP SCREWM3 x 8mm
46QYSBSGY3008EATAP SCREWM3 x 8mm
47QYSBSGY3008EATAP SCREWM3 x 8mm
48QYSBSGY3008EATAP SCREWM3 x 8mm
49QYSBSGY3008EATAP SCREWM3 x 8mm(x2)
50QYSBSGY3008EATAP SCREWM3 x 8mm
51QYSBSGY3008EATAP SCREWM3 x 8mm
52QYSBST3006EATAP SCREWM3 x 6mm
53QYSBSGY3008EATAP SCREWM3 x 8mm(x2)
54QYSBSGY3008EATAP SCREWM3 x 8mm
55QYSBSGY3008EATAP SCREWM3 x 8mm(x2)
1LV22234-001ATM.CHASSIS
2LV22235-001ASPINDLE BASE
3QYSDST2005ZATAP SCREWM2 x 5mm(x2)
4LV36555-001AG.S.HOLDER
5QYSDST2005ZATAP SCREWM2 x 5mm
6LV44041-002AGUIDE SHAFT
7LV44479-001ABAR SPRING
8LV22236-001AFEED HOLDER
9QAR0165-001FEED MOTOR5.0V DC
10LV30225-0X5ASPACER(x2)
11LV36557-001AF.M.GEAR
12QYSPSPT2030MASCREWM2 x 3mm
13QYSDST2005ZATAP SCREWM2 x 5mm
14QAL0786-004P.UP
15LV22237-001ARACK ARM
16LV36560-001ARACK ARM SPRING
17QYSPSFU1740ZATAP SCREWM1.7 x 4mm(x2)
18QUQK05-2420AC-EFFC WIRE24pin 20cm
20LV44041-002AGUIDE SHAFT
21LV36559-001AL.S.GEAR
22LV41517-003ALEAD SCREW
23LV36558-001AMIDDLE GEAR
24LV36556-001ASPRING HOLDER
25LV44623-001ACOMP.SPRING
26QYSDST2005ZATAP SCREWM2 x 5mm
27QYSDST2616MATAP SCREWM2.6 x 16mm
28QAR0387-001S.MOTOR
29QYSPSPU1775ZASCREWM1.7 x 7.5mm(x3)
30LV44042-001AROD SPRING(x2)
31LV44046-001AADJUST SCREW(x4)
3-8
DVD loading base assembly and parts list
JVS-1003
CFD-4007ZY2
Grease
Block No.
M
M
M
N
7.75mm
0.10mm
h
h
FMU-MB5-1M
Backside
< Back side >
j
j
The parts without symbol number are not service.
A
d
c
f
e
f
e
d
c
g
g
DVD loading switch board
k
B
< In side >
DVD module board
A
B
k
27
16
12
8
20
19
21
11
10
16
18
4
30
3
2
6
15
9
33
14
1
7
5
13
23
24
23
24
23
23
24
26
24
30
29
22
25
31
32
32
3-9
DVD loading base
Block No. [M][N][M][M]
Symbol No.Part No.Part NameDescriptionLocal
1LV11065-010ALOADER SUB ASSY
2E407140-001SSC.D ROLLER
3E407149-001SSRUBBER TUBE
4LV10979-003ATRAY
5LV35499-003ASHAFT GUIDE
6LV44022-001ASHAFT
7QYSSSF2008ZATAP SCREWM2 x 8mm
8QYSDSF2008ZATAP SCREWM2 x 8mm(x2)
9LV41741-004ASPECIAL SCREW
10QAR0197-001MOTOR2.0V DC
10orQAR0450-001MOTOR
11LV43844-002AMOTOR PULLEY
12QYSPSPU1730ZASCREWM1.7 x 3mm(x2)
13QYSDSF2008ZATAP SCREWM2 x 8mm
14LV43974-001ABELT
15LV21852-003ACLAMPER BASE
16QYSDSF2008ZATAP SCREWM2 x 8mm(x2)
18LV35056-002ADVD CLAMPER
19LV42930-003AP.C.MAGNET
19orLV41118-003AMAGNET
20LV43848-001AYOKE
21LE40906-002ASPECIAL SCREW
22FXL-D10-11MSINGLE DVD TRAM
23LV44043-001AINSULATOR(x4)
24LV44044-001ASPECIAL SCREW(x4)
25LV44007-001ATAPE
26LV44007-003ATAPE
27GN30226-001AHDMI BRACKET A
29GN20232-002AFITTING
30QYSBSF2608ZATAP SCREWM2.6 x 8mm(x3)
31QYSBSFG2606ZATAP SCREWM2.6 x 6mm
32GV30349-025ASPACER(x2)
33LV44603-003ALASER CAUTION
3-10
Electrical parts list
Main board
Block No. [0][1]
Symbol No.
Part No.Part NameDescriptionLocal
IC161PQ1CG21H2FZICRegulator
IC162KIA7806APIIC
IC181KIA7810APIIC
IC211MN101C49GAL1MASK ROM
IC212TC74VHCT08AFT-XIC(DIGITAL)
IC241BR24L08F-W-XIC(DIGITAL)
C1501QETM1EM-828E CAPACITOR8200uF 25V M
C1612NCB31CK-104XC CAPACITOR0.1uF 16V K
C1613QEZ0654-477ZE CAPACITOR470uF 10V M
C1614NCB31CK-104XC CAPACITOR0.1uF 16V K
C1621NCB31CK-104XC CAPACITOR0.1uF 16V K
C1622QETN1CM-107ZE CAPACITOR100uF 16V M
C1623NCB31CK-104XC CAPACITOR0.1uF 16V K
C1624QETN1AM-477ZE CAPACITOR470uF 10V M
C1701QETN1HM-106ZE CAPACITOR10uF 50V M
C1702QETN1CM-107ZE CAPACITOR100uF 16V M
C1801NCB31CK-104XC CAPACITOR0.1uF 16V K
C1802QETN1CM-107ZE CAPACITOR100uF 16V M
C1803NCB31CK-104XC CAPACITOR0.1uF 16V K
C1804QETN1EM-107ZE CAPACITOR100uF 25V M
C1901QETN1CM-107ZE CAPACITOR100uF 16V M
C1902QETN1EM-476ZE CAPACITOR47uF 25V M
C2101NDC31HJ-220XC CAPACITOR22pF 50V J
C2102NDC31HJ-220XC CAPACITOR22pF 50V J
C2103NCB31CK-104XC CAPACITOR0.1uF 16V K
C2104NCB31CK-104XC CAPACITOR0.1uF 16V K
C2105NCB31CK-104XC CAPACITOR0.1uF 16V K
C2201QETN1AM-108ZE CAPACITOR1000uF 10V M
C2301QETN1HM-106ZE CAPACITOR10uF 50V M
C2302QETN1CM-226ZE CAPACITOR22uF 16V M
C2303NCB31HK-102XC CAPACITOR1000pF 50V K
C2401QETN1CM-107ZE CAPACITOR100uF 16V M
C2402NCF31HZ-103XC CAPACITOR0.01uF 50V Z
C2601NCB31CK-104XC CAPACITOR0.1uF 16V K
C2602NCB31CK-104XC CAPACITOR0.1uF 16V K
C2603QETN1EM-107ZE CAPACITOR100uF 25V M
C2701QETN1HM-226ZE CAPACITOR22uF 50V M
C2702QETN1CM-107ZE CAPACITOR100uF 16V M
C2703QETN1EM-476ZE CAPACITOR47uF 25V M
C2801NCB31HK-272XC CAPACITOR2700pF 50V K
C2802NCB31HK-272XC CAPACITOR2700pF 50V K
C2803NCB31HK-272XC CAPACITOR2700pF 50V K
C2804NCB31HK-272XC CAPACITOR2700pF 50V K
C2805NCB31HK-272XC CAPACITOR2700pF 50V K
C2901QETN1AM-227ZE CAPACITOR220uF 10V M
C2902NCF31AZ-105XC CAPACITOR1uF 10V Z
C2903NDC31HJ-471XC CAPACITOR470pF 50V J
C2904NCF31AZ-105XC CAPACITOR1uF 10V Z
C3001QETN1HM-106ZE CAPACITOR10uF 50V M
C3002QETN1AM-227ZE CAPACITOR220uF 10V M
C3003QETN1AM-227ZE CAPACITOR220uF 10V M
C3004NDC31HJ-560XC CAPACITOR56pF 50V J
C3005NDC31HJ-560XC CAPACITOR56pF 50V J
C3006NCB31CK-104XC CAPACITOR0.1uF 16V K
C3007QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3008QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3201NCB31CK-393XC CAPACITOR0.039uF 16V K
C3202NCB31CK-393XC CAPACITOR0.039uF 16V K
C3203NCF31CZ-224XC CAPACITOR0.22uF 16V Z
C3204NCF31CZ-224XC CAPACITOR0.22uF 16V Z
C3205QETN1HM-475ZE CAPACITOR4.7uF 50V M
Symbol No.
Part No.Part NameDescriptionLocal
3-11
C3206QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3207QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3208QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3209QETN1EM-476ZE CAPACITOR47uF 25V M
C3210NCB31CK-104XC CAPACITOR0.1uF 16V K
C3211QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3212QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3213QETN1HM-106ZE CAPACITOR10uF 50V M
C3214QETN1HM-106ZE CAPACITOR10uF 50V M
C3215NCB31EK-153XC CAPACITOR0.015uF 25V K
C3216QETN1CM-107ZE CAPACITOR100uF 16V M
C3219QTE1H46-475ZE CAPACITOR4.7uF 50V
C3220QTE1H46-475ZE CAPACITOR4.7uF 50V
C3221NCF31CZ-224XC CAPACITOR0.22uF 16V Z
C3222NCF31CZ-224XC CAPACITOR0.22uF 16V Z
C3223NCF31CZ-224XC CAPACITOR0.22uF 16V Z
C3224QTE1H46-475ZE CAPACITOR4.7uF 50V
C3225NCF31HZ-473XC CAPACITOR0.047uF 50V Z
C3226NCF31HZ-473XC CAPACITOR0.047uF 50V Z
C3227QFV61HJ-473ZMF CAPACITOR0.047uF 50V J
C3227 or QFV91HJ-473ZMF CAPACITOR0.047uF 50V J
C3228QFV61HJ-154ZMF CAPACITOR0.15uF 50V J
C3228 or QFV91HJ-154ZMF CAPACITOR0.15uF 50V J
C3229QFV61HJ-473ZMF CAPACITOR0.047uF 50V J
C3229 or QFV91HJ-473ZMF CAPACITOR0.047uF 50V J
C3230QFV61HJ-154ZMF CAPACITOR0.15uF 50V J
C3230 or QFV91HJ-154ZMF CAPACITOR0.15uF 50V J
C3231QFV61HJ-223ZMF CAPACITOR0.022uF 50V J
C3231 or QFV91HJ-223ZMF CAPACITOR0.022uF 50V J
C3232QFV61HJ-223ZMF CAPACITOR0.022uF 50V J
C3232 or QFV91HJ-223ZMF CAPACITOR0.022uF 50V J
C3233QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3234QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3301QETN1HM-225ZE CAPACITOR2.2uF 50V M
C3302NCB31CK-473XC CAPACITOR0.047uF 16V K
C3303QETN1HM-226ZE CAPACITOR22uF 50V M
C3304NCB31CK-473XC CAPACITOR0.047uF 16V K
C3305QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3306QTE1E46-476ZE CAPACITOR47uF 25V
C3307NCB31CK-105XC CAPACITOR1uF 16V K
C3401QETN1EM-476ZE CAPACITOR47uF 25V M
C3501QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3502QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3503QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3504QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3505QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3506QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3531QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3532QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3535QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3536QETN1CM-107ZE CAPACITOR100uF 16V M
C3541QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3544QETN1HM-475ZE CAPACITOR4.7uF 50V M
C3545QETN1CM-107ZE CAPACITOR100uF 16V M
C3551QETN1EM-476ZE CAPACITOR47uF 25V M
C3552NCB31CK-104XC CAPACITOR0.1uF 16V K
C3603NCF31CZ-104XC CAPACITOR0.1uF 16V Z
C4001NCB30JK-105XC CAPACITOR1uF 6.3V K
C4002NCB30JK-105XC CAPACITOR1uF 6.3V K
C4101QETN1EM-476ZE CAPACITOR47uF 25V M
C4102NCB31HK-103XC CAPACITOR0.01uF 50V K
C4103NCB31HK-103XC CAPACITOR0.01uF 50V K
C4105NCB30JK-105XC CAPACITOR1uF 6.3V K
C4106NCB30JK-105XC CAPACITOR1uF 6.3V K
C4107NCB31HK-103XC CAPACITOR0.01uF 50V K
C4108NDC31HJ-390XC CAPACITOR39pF 50V J
C4109NDC31HJ-390XC CAPACITOR39pF 50V J
C4110NDC31HJ-390XC CAPACITOR39pF 50V J
C4111NDC31HJ-390XC CAPACITOR39pF 50V J
C4112NDC31HJ-390XC CAPACITOR39pF 50V J
C4113NDC31HJ-390XC CAPACITOR39pF 50V J
C4114NDC31HJ-390XC CAPACITOR39pF 50V J
C4115NDC31HJ-390XC CAPACITOR39pF 50V J
C4201QETN1AM-477ZE CAPACITOR470uF 10V M
C4202NCB31CK-104XC CAPACITOR0.1uF 16V K
C4203NCB31HK-103XC CAPACITOR0.01uF 50V K
C4204NCB30JK-105XC CAPACITOR1uF 6.3V K
C4205NCB30JK-105XC CAPACITOR1uF 6.3V K
Symbol No.
Part No.Part NameDescriptionLocal
C4206QETN1CM-226ZE CAPACITOR22uF 16V M
C4207NCB30JK-105XC CAPACITOR1uF 6.3V K
C4208NCB30JK-105XC CAPACITOR1uF 6.3V K
C4209NCB30JK-105XC CAPACITOR1uF 6.3V K
C4210QETN1AM-477ZE CAPACITOR470uF 10V M
C4211QETN1AM-477ZE CAPACITOR470uF 10V M
C4212QETN0JM-108ZE CAPACITOR1000uF 6.3V M
C4213NCB31CK-104XC CAPACITOR0.1uF 16V K
C4301NDC31HJ-470XC CAPACITOR47pF 50V J
C4302NDC31HJ-470XC CAPACITOR47pF 50V J
C4303NDC31HJ-470XC CAPACITOR47pF 50V J
C4308QETN1AM-477ZE CAPACITOR470uF 10V M
C4310NCB30JK-105XC CAPACITOR1uF 6.3V K
C4311NCB31HK-103XC CAPACITOR0.01uF 50V K
C4312NDC31HJ-470XC CAPACITOR47pF 50V J
C4313NDC31HJ-470XC CAPACITOR47pF 50V J
C4314NCB30JK-105XC CAPACITOR1uF 6.3V K
C4315NDC31HJ-470XC CAPACITOR47pF 50V J
C4401QETN1HM-475ZE CAPACITOR4.7uF 50V M
C4402NCB31HK-331XC CAPACITOR330pF 50V K
C4411QETN1HM-475ZE CAPACITOR4.7uF 50V M
C4412NCB31HK-331XC CAPACITOR330pF 50V K
C4501QETN1HM-475ZE CAPACITOR4.7uF 50V M
C4502NDC31HJ-331XC CAPACITOR330pF 50V J
C4511QETN1HM-475ZE CAPACITOR4.7uF 50V M
C4512NDC31HJ-331XC CAPACITOR330pF 50V J
C4531NDC31HJ-470XC CAPACITOR47pF 50V J
C4532NDC31HJ-470XC CAPACITOR47pF 50V J
C4533NDC31HJ-470XC CAPACITOR47pF 50V J
C4534NDC31HJ-470XC CAPACITOR47pF 50V J
C4602QETN1EM-476ZE CAPACITOR47uF 25V M
C6401NBE21CM-106XTA E CAPACITOR10uF 16V M
C6402NDC31HJ-681XC CAPACITOR680pF 50V J
C6403NBE21CM-106XTA E CAPACITOR10uF 16V M
C6404NDC31HJ-680XC CAPACITOR68pF 50V J
C6405NBE21CM-106XTA E CAPACITOR10uF 16V M
C6501NDC31HJ-270XC CAPACITOR27pF 50V J
C6502NDC31HJ-2R0XC CAPACITOR2pF 50V J
C6503NDC31HJ-270XC CAPACITOR27pF 50V J
C6601NDC31HJ-270XC CAPACITOR27pF 50V J
C6602NDC31HJ-2R0XC CAPACITOR2pF 50V J
C6603NDC31HJ-270XC CAPACITOR27pF 50V J
C6701NDC31HJ-270XC CAPACITOR27pF 50V J
C6702NDC31HJ-2R0XC CAPACITOR2pF 50V J
C6703NDC31HJ-270XC CAPACITOR27pF 50V J
C7506NCB31CK-105XC CAPACITOR1uF 16V K
C5004QETM1EM-478E CAPACITOR4700uF 25V M
C5005QETN1JM-107ZE CAPACITOR100uF 63V M
C5006QETN1JM-107ZE CAPACITOR100uF 63V M
C5101NDC31HJ-681XC CAPACITOR680pF 50V J
C5102NDC31HJ-220XC CAPACITOR22pF 50V J
C5103QETN1CM-107ZE CAPACITOR100uF 16V M
C5104NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5105NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5106NCB31HK-104XC CAPACITOR0.1uF 50V K
C5107QETN1HM-225ZE CAPACITOR2.2uF 50V M
C5201NDC31HJ-101XC CAPACITOR100pF 50V J
C5202NDC31HJ-3R0XC CAPACITOR3pF 50V J
C5203QETN1CM-107ZE CAPACITOR100uF 16V M
C5204NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5205NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5206NDC31HJ-471XC CAPACITOR470pF 50V J
C5207QETN1HM-225ZE CAPACITOR2.2uF 50V M
C5301NDC31HJ-101XC CAPACITOR100pF 50V J
C5302NDC31HJ-3R0XC CAPACITOR3pF 50V J
C5303QETN1CM-107ZE CAPACITOR100uF 16V M
C5304NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5305NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5306NDC31HJ-471XC CAPACITOR470pF 50V J
C5307QETN1HM-225ZE CAPACITOR2.2uF 50V M
C5401NDC31HJ-101XC CAPACITOR100pF 50V J
C5402NDC31HJ-3R0XC CAPACITOR3pF 50V J
C5403QETN1CM-107ZE CAPACITOR100uF 16V M
C5404NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5405NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5406NDC31HJ-471XC CAPACITOR470pF 50V J
C5407QETN1HM-225ZE CAPACITOR2.2uF 50V M
C5501NDC31HJ-101XC CAPACITOR100pF 50V J
C5502NDC31HJ-3R0XC CAPACITOR3pF 50V J
C5503QETN1CM-107ZE CAPACITOR100uF 16V M
C5504NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5505NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5506NDC31HJ-471XC CAPACITOR470pF 50V J
C5507QETN1HM-225ZE CAPACITOR2.2uF 50V M
C5601NDC31HJ-101XC CAPACITOR100pF 50V J
C5602NDC31HJ-3R0XC CAPACITOR3pF 50V J
C5603QETN1CM-107ZE CAPACITOR100uF 16V M
C5604NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5605NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C5606NDC31HJ-471XC CAPACITOR470pF 50V J
C5607QETN1HM-225ZE CAPACITOR2.2uF 50V M
C5801QETN1HM-106ZE CAPACITOR10uF 50V M
C5802QETN1CM-107ZE CAPACITOR100uF 16V M
C5803NCF31HZ-223XC CAPACITOR0.022uF 50V Z
C5901QETN1HM-106ZE CAPACITOR10uF 50V M
C5911NCB31HK-104XC CAPACITOR0.1uF 50V K
C5912NCB31HK-104XC CAPACITOR0.1uF 50V K
C5913NCB31HK-471XC CAPACITOR470pF 50V K
Symbol No.
Part No.Part NameDescriptionLocal
C5914NCB31HK-471XC CAPACITOR470pF 50V K
C5921NCB31HK-104XC CAPACITOR0.1uF 50V K
C5922NCB31HK-104XC CAPACITOR0.1uF 50V K
C5923NCB31HK-471XC CAPACITOR470pF 50V K
C5924NCB31HK-471XC CAPACITOR470pF 50V K
C5931NCB31HK-104XC CAPACITOR0.1uF 50V K
C5932NCB31HK-104XC CAPACITOR0.1uF 50V K
C5933NCB31HK-471XC CAPACITOR470pF 50V K
C5934NCB31HK-471XC CAPACITOR470pF 50V K
C5941NCB31HK-104XC CAPACITOR0.1uF 50V K
C5942NCB31HK-104XC CAPACITOR0.1uF 50V K
C5943NCB31HK-471XC CAPACITOR470pF 50V K
C5944NCB31HK-471XC CAPACITOR470pF 50V K
C5951NCB31HK-104XC CAPACITOR0.1uF 50V K
C5952NCB31HK-104XC CAPACITOR0.1uF 50V K
C5953NCB31HK-471XC CAPACITOR470pF 50V K
C5954NCB31HK-471XC CAPACITOR470pF 50V K
C5961NCB31HK-104XC CAPACITOR0.1uF 50V K
C5962NCB31HK-104XC CAPACITOR0.1uF 50V K
C5963NCB31HK-471XC CAPACITOR470pF 50V K
C5964NCB31HK-471XC CAPACITOR470pF 50V K
L5101QQLZ038-R45COIL0.45uH
L5101 or QQLZ042-R45COIL0.45uH
L5201QQLZ038-R45COIL0.45uH
L5201 or QQLZ042-R45COIL0.45uH
L5301QQLZ038-R45COIL0.45uH
L5301 or QQLZ042-R45COIL0.45uH
L5401QQLZ038-R45COIL0.45uH
L5401 or QQLZ042-R45COIL0.45uH
L5501QQLZ038-R45COIL0.45uH
L5501 or QQLZ042-R45COIL0.45uH
L5601QQLZ038-R45COIL0.45uH
L5601 or QQLZ042-R45COIL0.45uH
L5911QQLZ038-R45COIL0.45uH
L5911 or QQLZ042-R45COIL0.45uH
L5921QQLZ038-R45COIL0.45uH
L5921 or QQLZ042-R45COIL0.45uH
L5931QQLZ038-R45COIL0.45uH
L5931 or QQLZ042-R45COIL0.45uH
L5941QQLZ038-R45COIL0.45uH
L5941 or QQLZ042-R45COIL0.45uH
L5951QQLZ038-R45COIL0.45uH
L5951 or QQLZ042-R45COIL0.45uH
L5961QQLZ038-R45COIL0.45uH
L5961 or QQLZ042-R45COIL0.45uH
C1003QCZ9079-102C CAPACITOR1000pF AC250V M
C1101QFLC2AJ-472ZM CAPACITOR4700pF 100V J
C1101 or QFNC2AJ-472ZM CAPACITOR4700pF 100V J
C1102QETM1EM-108E CAPACITOR1000uF 25V M
C1103NCF31EZ-104XC CAPACITOR0.1uF 25V Z
C1104NCB31CK-104XC CAPACITOR0.1uF 16V K
C1201NCB31HK-104XC CAPACITOR0.1uF 50V K
C1202NCB31HK-104XC CAPACITOR0.1uF 50V K
C1203NCB31HK-104XC CAPACITOR0.1uF 50V K
C1204NCB31HK-104XC CAPACITOR0.1uF 50V K
C1205NCB31HK-104XC CAPACITOR0.1uF 50V K
C1206NCB31HK-104XC CAPACITOR0.1uF 50V K
C1207NCB31HK-104XC CAPACITOR0.1uF 50V K
C1208NCB31HK-104XC CAPACITOR0.1uF 50V K
C1209NCB31HK-104XC CAPACITOR0.1uF 50V K
C1210NCB31HK-104XC CAPACITOR0.1uF 50V K
C1211NCB31HK-104XC CAPACITOR0.1uF 50V K
C1212NCB31HK-104XC CAPACITOR0.1uF 50V K
C1301NCB31HK-104XC CAPACITOR0.1uF 50V K
C1302NCB31HK-104XC CAPACITOR0.1uF 50V K
C1401QFLC1HJ-473ZM CAPACITOR0.047uF 50V J
C1401 or QFN31HJ-473ZM CAPACITOR0.047uF 50V J
C1402QEKC1HM-105ZE CAPACITOR1uF 50V M
C1403QETN1HM-476ZE CAPACITOR47uF 50V M
C1404QFNC2AJ-473ZM CAPACITOR0.047uF 100V J
C1404 or QFN31HJ-473ZM CAPACITOR0.047uF 50V J
C1405QETN1JM-107ZE CAPACITOR100uF 63V M
C2501QEKC1CM-227ZE CAPACITOR220uF 16V M
C2502NCF31AZ-105XC CAPACITOR1uF 10V Z
Symbol No.
Part No.Part NameDescriptionLocal
3-16
C2511QEKC1CM-227ZE CAPACITOR220uF 16V M
C2512NCF31AZ-105XC CAPACITOR1uF 10V Z
C2521QEKC1CM-227ZE CAPACITOR220uF 16V M
C2522NCF31AZ-105XC CAPACITOR1uF 10V Z
C6001NCB31HK-102XC CAPACITOR1000pF 50V K
C6003NCB30JK-105XC CAPACITOR1uF 6.3V K
C6101NCF31AZ-105XC CAPACITOR1uF 10V Z
C7002NCB31EK-223XC CAPACITOR0.022uF 25V K
C7003NCB31EK-223XC CAPACITOR0.022uF 25V K
C7004NCF31HZ-103XC CAPACITOR0.01uF 50V Z
C7005NCF31HZ-103XC CAPACITOR0.01uF 50V Z
C7006NCF31HZ-103XC CAPACITOR0.01uF 50V Z
C7601QER61CM-476ZE CAPACITOR47uF 16V M
C7602NDC31HJ-470XC CAPACITOR47pF 50V J
C7603QER61CM-476ZE CAPACITOR47uF 16V M
C7604NDC31HJ-470XC CAPACITOR47pF 50V J
C7605NCB31HK-103XC CAPACITOR0.01uF 50V K
C7606NDC31HJ-470XC CAPACITOR47pF 50V J
C7607NDC31HJ-221XC CAPACITOR220pF 50V J
C7608NDC31HJ-221XC CAPACITOR220pF 50V J
C7610NCF21CZ-105XC CAPACITOR1uF 16V Z
C7611NCF21CZ-105XC CAPACITOR1uF 16V Z
C7612NCF21CZ-105XC CAPACITOR1uF 16V Z
C7613NCF21CZ-105XC CAPACITOR1uF 16V Z
C7614NDC31HJ-101XC CAPACITOR100pF 50V J
C7615NDC31HJ-101XC CAPACITOR100pF 50V J
C7616NDC31HJ-101XC CAPACITOR100pF 50V J
C7617NDC31HJ-101XC CAPACITOR100pF 50V J
C7618NCF21CZ-105XC CAPACITOR1uF 16V Z
C7619NCF21CZ-105XC CAPACITOR1uF 16V Z
C7620NCF31HZ-473XC CAPACITOR0.047uF 50V Z
C7621NDC31HJ-100XC CAPACITOR10pF 50V J
C7622NDC31HJ-100XC CAPACITOR10pF 50V J
C7627QER61CM-476ZE CAPACITOR47uF 16V M
C7628QER61CM-476ZE CAPACITOR47uF 16V M
C7629NDC31HJ-100XC CAPACITOR10pF 50V J
C7630NDC31HJ-100XC CAPACITOR10pF 50V J
C7631NDC31HJ-100XC CAPACITOR10pF 50V J
C7632NDC31HJ-100XC CAPACITOR10pF 50V J
C7633QER61CM-476ZE CAPACITOR47uF 16V M
C7634NCF21CZ-105XC CAPACITOR1uF 16V Z
C7635NDC31HJ-100XC CAPACITOR10pF 50V J
C7636NDC31HJ-100XC CAPACITOR10pF 50V J
C7639NCF21CZ-105XC CAPACITOR1uF 16V Z
C7640NCF21CZ-105XC CAPACITOR1uF 16V Z
R1001QRJ146J-100XUNF C RESISTOR10Ω 1/4W J
R1101QRJ146J-100XUNF C RESISTOR10
Ω
1/4W J
R1401QRE141J-104YC RESISTOR100k
Ω
1/4W J
R1402QRJ146J-100XUNF C RESISTOR10Ω 1/4W J
R1403QRJ146J-470XUNF C RESISTOR47Ω 1/4W J
R1404QRJ146J-682XUNF C RESISTOR6.8k
C101NCB31CK-104XC CAPACITOR0.1uF 16V K
C102NCB31CK-104XC CAPACITOR0.1uF 16V K
C103NCB31CK-104XC CAPACITOR0.1uF 16V K
C104NCB31CK-104XC CAPACITOR0.1uF 16V K
C105NEAF0JM-476XE CAPACITOR47uF 6.3V M
C106NBE20JM-226XTA E CAPACITOR22uF 6.3V M
C107NCB31CK-104XC CAPACITOR0.1uF 16V K
C108NBE20JM-226XTA E CAPACITOR22uF 6.3V M
C201NDC31HJ-221XC CAPACITOR220pF 50V J
C202NDC31HJ-221XC CAPACITOR220pF 50V J
C203NCB31HK-103XC CAPACITOR0.01uF 50V K
C204NCB31CK-104XC CAPACITOR0.1uF 16V K
C205NCB31HK-271XC CAPACITOR270pF 50V K
C206NDC31HJ-151XC CAPACITOR150pF 50V J
C210NCF31AZ-105XC CAPACITOR1uF 10V Z
C211NCB31HK-223XC CAPACITOR0.022uF 50V K
C217NCB31CK-104XC CAPACITOR0.1uF 16V K
C251NCB31AK-474XC CAPACITOR0.47uF 10V K
C256NCB31CK-104XC CAPACITOR0.1uF 16V K
Symbol No.
Part No.Part NameDescriptionLocal
C257NCB31HK-822XC CAPACITOR8200pF 50V K
C258NCB31CK-153XC CAPACITOR0.015uF 16V K
C259NCB31CK-153XC CAPACITOR0.015uF 16V K
C260NCB31HK-223XC CAPACITOR0.022uF 50V K
C261NCB31HK-223XC CAPACITOR0.022uF 50V K
C262NCB31HK-223XC CAPACITOR0.022uF 50V K
C263NEAF1CM-107XE CAPACITOR100uF 16V M
C301NEAF0JM-227XE CAPACITOR220uF 6.3V M
C302NEAF0GM-476XE CAPACITOR47uF 4V M
C303NEAF0GM-476XE CAPACITOR47uF 4V M
C304NCB30JK-105XC CAPACITOR1uF 6.3V K
C305NCB31CK-104XC CAPACITOR0.1uF 16V K
C306NCB31CK-104XC CAPACITOR0.1uF 16V K
C307NCB31CK-104XC CAPACITOR0.1uF 16V K
C309NCB31CK-104XC CAPACITOR0.1uF 16V K
C310NCB31CK-104XC CAPACITOR0.1uF 16V K
C312NCB31CK-104XC CAPACITOR0.1uF 16V K
C313NCB31CK-104XC CAPACITOR0.1uF 16V K
C314NCB31CK-104XC CAPACITOR0.1uF 16V K
C315NCB31CK-104XC CAPACITOR0.1uF 16V K
C316NCB31CK-104XC CAPACITOR0.1uF 16V K
C318NCB31CK-104XC CAPACITOR0.1uF 16V K
C319NCB31CK-104XC CAPACITOR0.1uF 16V K
C320NCB31CK-104XC CAPACITOR0.1uF 16V K
C321NCB31CK-104XC CAPACITOR0.1uF 16V K
C322NCB31CK-104XC CAPACITOR0.1uF 16V K
C323NCB31CK-104XC CAPACITOR0.1uF 16V K
C324NCB30JK-105XC CAPACITOR1uF 6.3V K
C325NDC31HJ-120XC CAPACITOR12pF 50V J
C326NDC31HJ-100XC CAPACITOR10pF 50V J
C328NCB31HK-103XC CAPACITOR0.01uF 50V K
C330NCB31CK-104XC CAPACITOR0.1uF 16V K
C331NCB31CK-333XC CAPACITOR0.033uF 16V K
C332NCB31CK-104XC CAPACITOR0.1uF 16V K
C333NCB31CK-104XC CAPACITOR0.1uF 16V K
C334NCB31CK-104XC CAPACITOR0.1uF 16V K
C335NCB31CK-104XC CAPACITOR0.1uF 16V K
C337NCB31CK-183XC CAPACITOR0.018uF 16V K
C338NCB31HK-562XC CAPACITOR5600pF 50V K
C339NBE20JM-106XTA E CAPACITOR10uF 6.3V M
C340NCB30JK-105XC CAPACITOR1uF 6.3V K
C341NCB30JK-105XC CAPACITOR1uF 6.3V K
C345NCB31CK-104XC CAPACITOR0.1uF 16V K
C347NCB31CK-104XC CAPACITOR0.1uF 16V K
C348NCB31CK-104XC CAPACITOR0.1uF 16V K
C349NCB31CK-104XC CAPACITOR0.1uF 16V K
C350NCB31HK-103XC CAPACITOR0.01uF 50V K
C351NCB31HK-103XC CAPACITOR0.01uF 50V K
C352NCB31CK-153XC CAPACITOR0.015uF 16V K
C353NCB31HK-561XC CAPACITOR560pF 50V K
C354NCB31HK-561XC CAPACITOR560pF 50V K
C356NCB30JK-105XC CAPACITOR1uF 6.3V K
C359NCB30JK-105XC CAPACITOR1uF 6.3V K
C370NCB31CK-104XC CAPACITOR0.1uF 16V K
C371NCF31AZ-105XC CAPACITOR1uF 10V Z
C372NCB31CK-104XC CAPACITOR0.1uF 16V K
C373NCB31CK-104XC CAPACITOR0.1uF 16V K
C374NCB31CK-104XC CAPACITOR0.1uF 16V K
C375NCB31CK-104XC CAPACITOR0.1uF 16V K
C378NCB31CK-104XC CAPACITOR0.1uF 16V K
C379NCB31CK-104XC CAPACITOR0.1uF 16V K
C380NCB21CK-105XC CAPACITOR1uF 16V K
C381NCB21AK-225XC CAPACITOR2.2uF 10V K
C382NCB31HK-471XC CAPACITOR470pF 50V K
C383NCB31CK-104XC CAPACITOR0.1uF 16V K
C391NEAF0JM-227XE CAPACITOR220uF 6.3V M
C392NCB31CK-104XC CAPACITOR0.1uF 16V K
C393NCB31HK-103XC CAPACITOR0.01uF 50V K
C455NCB31HK-103XC CAPACITOR0.01uF 50V K
C551NCB31CK-104XC CAPACITOR0.1uF 16V K
C552NCB31CK-104XC CAPACITOR0.1uF 16V K
C553NCB31CK-104XC CAPACITOR0.1uF 16V K
C554NCB31CK-104XC CAPACITOR0.1uF 16V K
C555NCB31CK-104XC CAPACITOR0.1uF 16V K
C557NCB31HK-102XC CAPACITOR1000pF 50V K
C558NBE20JM-226XTA E CAPACITOR22uF 6.3V M
C559NCB31CK-104XC CAPACITOR0.1uF 16V K
C560NCB31CK-104XC CAPACITOR0.1uF 16V K
Symbol No.
Part No.Part NameDescriptionLocal
3-18
C562NCF31AZ-105XC CAPACITOR1uF 10V Z
C563NCB31CK-104XC CAPACITOR0.1uF 16V K
C564NCB31CK-104XC CAPACITOR0.1uF 16V K
C701NCB31CK-104XC CAPACITOR0.1uF 16V K
C702NCB31CK-104XC CAPACITOR0.1uF 16V K
C703NCB31CK-104XC CAPACITOR0.1uF 16V K
C704NEAF0JM-476XE CAPACITOR47uF 6.3V M
C706NEAF1CM-106XE CAPACITOR10uF 16V M
C707NCB31CK-104XC CAPACITOR0.1uF 16V K
C708NCB31CK-104XC CAPACITOR0.1uF 16V K
C709NCB31CK-104XC CAPACITOR0.1uF 16V K
C711NCB21CK-105XC CAPACITOR1uF 16V K
C712NCB31HK-103XC CAPACITOR0.01uF 50V K
C713NCB21CK-105XC CAPACITOR1uF 16V K
C740NCB31CK-104XC CAPACITOR0.1uF 16V K
C741NCF31AZ-105XC CAPACITOR1uF 10V Z
C742NCB31CK-104XC CAPACITOR0.1uF 16V K
C743NCB31CK-104XC CAPACITOR0.1uF 16V K
C744NEAF1CM-106XE CAPACITOR10uF 16V M
C745NEAF1CM-106XE CAPACITOR10uF 16V M
C801NCB21CK-105XC CAPACITOR1uF 16V K
C802NCB21AK-225XC CAPACITOR2.2uF 10V K
C803NEAF0JM-227XE CAPACITOR220uF 6.3V M
C804NCB31HK-471XC CAPACITOR470pF 50V K
C901NCB21AK-105XC CAPACITOR1uF 10V K
C902NCB31HK-471XC CAPACITOR470pF 50V K
C903NCB21AK-225XC CAPACITOR2.2uF 10V K
C905NEAF0GM-476XE CAPACITOR47uF 4V M
C906NEAF0GM-476XE CAPACITOR47uF 4V M
C914NCF21CZ-225XC CAPACITOR2.2uF 16V Z
C916NCF21CZ-225XC CAPACITOR2.2uF 16V Z
C921NCF21CZ-225XC CAPACITOR2.2uF 16V Z
C922NCF21CZ-225XC CAPACITOR2.2uF 16V Z
C927NCB31CK-104XC CAPACITOR0.1uF 16V K
C928NCB30JK-105XC CAPACITOR1uF 6.3V K
C929NCB31CK-104XC CAPACITOR0.1uF 16V K
C930NCB30JK-105XC CAPACITOR1uF 6.3V K
C931NEAF0JM-476XE CAPACITOR47uF 6.3V M
C932NCB30JK-105XC CAPACITOR1uF 6.3V K
C933NCB30JK-105XC CAPACITOR1uF 6.3V K
C950NCB31CK-104XC CAPACITOR0.1uF 16V K
C951NCB31CK-104XC CAPACITOR0.1uF 16V K
C952NCB31CK-104XC CAPACITOR0.1uF 16V K
C953NCB31CK-104XC CAPACITOR0.1uF 16V K
C954NCB31CK-104XC CAPACITOR0.1uF 16V K
C955NCB31CK-104XC CAPACITOR0.1uF 16V K
C956NCB31CK-104XC CAPACITOR0.1uF 16V K
C957NCB31CK-104XC CAPACITOR0.1uF 16V K
C958NCB31CK-104XC CAPACITOR0.1uF 16V K
C959NCB31CK-104XC CAPACITOR0.1uF 16V K
C960NCB31CK-104XC CAPACITOR0.1uF 16V K
C961NCB31CK-104XC CAPACITOR0.1uF 16V K
C962NCB31CK-104XC CAPACITOR0.1uF 16V K
C963NCB31CK-104XC CAPACITOR0.1uF 16V K
C964NCB31CK-104XC CAPACITOR0.1uF 16V K
C965NCB31CK-104XC CAPACITOR0.1uF 16V K
C966NCB31CK-104XC CAPACITOR0.1uF 16V K
C967NCB31CK-104XC CAPACITOR0.1uF 16V K
C968NCB31CK-104XC CAPACITOR0.1uF 16V K
C969NCB31CK-104XC CAPACITOR0.1uF 16V K
C970NCB31CK-104XC CAPACITOR0.1uF 16V K
C971NCB31CK-104XC CAPACITOR0.1uF 16V K
C972NCB31CK-104XC CAPACITOR0.1uF 16V K
C973NCB31CK-104XC CAPACITOR0.1uF 16V K
C974NCB31CK-104XC CAPACITOR0.1uF 16V K
C975NCB31CK-104XC CAPACITOR0.1uF 16V K
C976NDC31HJ-1R0XC CAPACITOR1pF 50V J
C977NDC31HJ-1R0XC CAPACITOR1pF 50V J
C978NCB31CK-104XC CAPACITOR0.1uF 16V K
C979NCB31CK-104XC CAPACITOR0.1uF 16V K
No additional / supplemental order of WARRANTY CARDs are available.
P19
P13
P9
P12
P14
P13
P13
P4
P10
A12
A10
A5
P1
P16
P20
P3
P5
P17
P2
P3
P17
P11
P13
P15
P6
P2
P18
A11
A1,
A2(Only E,EN),
A3,
A4(Only B),
A7,
A8,
A6,
2/2
1/2
1/2
2/2
A17
A19
A18
A18
A19
A15
A16
A14
A13
A20,A21, A22,
A23,A24,
A25
Bottom View
A18
A18
A18
A18
Only B
P7
A9
Only B
P8
3-21
Packing and Accessories
Block No. [M][3][M][M]
Symbol No.Part No.Part NameDescriptionLocal
A 1LVT1704-003AINST BOOKENGB
A 1LVT1704-004AINST BOOKGER FREE
A 1LVT1704-006AINST BOOKDAN FIN SWEEN
A 1LVT1704-008AINST BOOKHUN CZE POLEV
A 2LVT1704-005AINST BOOKITA DUTE
A 2LVT1704-007AINST BOOKSPA POREN
A 3LVT1755-001ASHEETB,E,EN
A 3LVT1755-002ASHEETEV
A 4VNA3000-204REGIST CARDB
A 5QQR0491-002FERRITE COREFL1 TDK (BLACK)
A 6------------WARRANTY CARDBT-54032-1
A 7QAM0955-002iPod CABLE
A 8QAL0014-003AM LOOP ANT
A 9QAL0457-001ANT.WIRE
A10LV37205-003ASTAND ASSY
A11------------BATTERY(x2)
A12RM-STHD5RREMOTE CONTROL UNIT
A139000009301FOOT(x2)
A14AB160039-01SPK WITH BOX-W
A15AB077025-01SPK WITH BOX-F(x2)
A16AB077025-02SPK WITH BOX-S(x2)
A17AB077026-01SPK WITH BOX-C
A189000007941FOOT(x20)
A199000006301FOOT(x4)
A206200045901SPK CORD-C
A216200045911SPK CORD-FR
A226200045921SPK CORD-FL
A236200045931SPK CORD-SR
A246200045941SPK CORD-SL
A256200047501SPEAKER CORD-SW
P 1LV37599-017ACARTON BOXB
P 1LV37599-002ACARTON BOXE,EN,EV
P 2GN10127-204APACKING PAD(F)
P 3GN10128-203APACKING PAD(R)
P 4QPC06506515PBPOLY BAG65cm x 65cm
P 5QPH01404905HPOLY SHEET14cm x 49cm
P 6QPA02503503PBPOLY BAG25cm x 35cm
P 7QPJ01203040POLY SHEET12cm x 30cmB
P 8LV34107-008APACKING SHEETB
P 9LV11399-001ACUSHION-A
P10LV11399-002ACUSHION-B
P11LV11399-003ACUSHION-C
P128500066131MIRROR SHEET
P138500066141MIRROR SHEET(x4)
P148500066151MIRROR SHEET
P158500047111POLY BAG
P168500066911POLY BAG
P178500066921POLY BAG(x4)
P188500066931POLY BAG
P19LV35831-0C2ACARTON BOX
P208500032771POLY BAG
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.