JVC LT-55MA888 User Manual

Page 1

LT-55MA888

(55" class/ 55 diagonal)"

Before operating the un it , pl ea se r ead this manual thoroughly.

ATTENTION

If you purchase a univers al r em ot e co ntrol from your local retai le r, pl ea se c ontact the remote manufac tu re r fo r th e required programmin g co de .

PLEASE HAVE TH E MODEL NUM BE R READY PRIOR TO CALLING

FOR RECYCLING INFORMAT ION, PLEASE CONTAC T CUSTOME R SE RVICE.

CUSTOMER SE RVICE - 1-888-582-8870

ENGLISH

7 8 9

1 2

VOL CH

MTS/AUDIO

CC/SUBTITLE

TTS

EXIT

INFO

PICTURE

SOUNDASPECT

USER GUIDE

Page 2

Contents

Safety and warnings.............................................................. ..... ..... ..... ..... ....1 -3

Introduction........................................................................... ..... ... ... ..... ..... .4

Installation........................................................................... ..... ..... ..... ..... ....5 -8

...................................................................................................9

General Description............................................. ..... ..... ..... ..... ..... ..... . ..... ..... 10-13

External Connection........................................ ..... ..... ..... ..... ..... ..... ..... ..... ..... .14-1 7

Basic Operations............................................................... ..... ..... ..... ..... ..... ...18 -19

Menu System Instruction..................................................... ..... ..... ..... ..... ..... ..20- 37

Digital Media Player..................................... ..... ..... ..... ..... ..... ..... ..... ..... ..... ..... 38

Trouble Shooting.............................................................. ..... ..... ..... ..... ..... ....3 9-40

Reference........................................................................................ ..... ..... ...41

Wall Mount

Page 3

SAFETY AND WARNINGS

-1-

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK!

DO NOT OPEN! ATTENTION RISQUE DE CHOC ELECTRIQUE! NE PAS OUVRIR!

CAU TION

CAUTI ON：

The lightning flash with arrowhead symbol,within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

WARNING:

TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

WARNING:

Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.

CAUTION:

Seria l nu mber:

Model n um ber:

Location of the required marking

The rating sheet and the safety caution are on the rear of the unit.

Important Note:

In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the carton and original packaging for future use.

BATTERY PRECA UT IO NS:

Batteries should not be e xp os ed t o ex cessive heat such as sunshine,fire o r th e li ke . The remote control unit u se s in fr ar ed beams to transmit signals, so su nl ig ht o r fl uorescent light on the remote sensor may sho rt en o pe ra ting distance. Incorrect use of batter ie s ma y ca us e them to leak or burst. Read the batter y wa rn in gs a nd use the batteries properly. Do not mix old and new batter ie s. Do not mix alkaline, stan da rd ( ca rb on-zinc), or rechargeable, (Ni-C d, N i- MH , et c.) batteries. Remove batteries if the r em ot e co nt rol will not be operated for an extende d pe ri od o f ti me.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE REC EIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Page 4

SAFETY AND WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

The symbol indicates that dangerous voltages constituting a risk of electric shock are present within this unit.

The symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

To reduce th e ri sk o f fire or electric shock, do not expo se t hi s apparatus to rain or moistu re .

WARNI NG:

Impo rtant Safety Instruc tions

1) Rea d these ins tructions .

2) Kee p these instructions .

3) Hee d all warni ngs.

4) Fol low all ins tructions .

5) Do no t use this apparatus nea r water.

6) Cle an only wit h non abrasiv e dry cloth.

7) Do no t block any ventilatio n openings, install in acc ordance w ith the instr uctions.

8) Do no t install near any heat so urces such as radi ators, heat register s, stoves, or other appa ratus (in cluding amp lifiers ) that produc e heat .

9) Do no t defeat the safety purp ose of the pola rized plu g. If the provi ded plug does not fit into y our outle t, consult an e lectrician for repl acement o f the obsolet e outlet.

10) Pr otect the power cord fro m being walked on or pin ched part icularly at p lugs, convenience rece ptacles, and the point w here they exit from the ap paratus.

11) Only use attachmen ts/accessories spe cified by the m anufacturer.

12) Un plug this a pparatus du ring ligh ting storms or whe n unused fo r long period s of time.

13) Re fer all servicing to qua lified service pers onnel. Se rvicing is re quired wh en the appa ratus has b een damaged i n any way, such as whe n power-s upply cord or p lug is dama ged, liqu id has been s pilled or obj ects have f allen into the ap paratus, the apparat us has been exposed to rai n or moisture, does not op erate normally, or has be en droppe d.

14) Ma ins plug is u sed as the disc onnect device, the di sconnec t device shal l remain readily oper able.

15) Do n ot cover the ventilati on openings with item s such as newspapers, ta ble-cloth, curtain s, etc.

16) No n aked flame sources, su ch as lighted cand les, shou ld be placed on t he appara tus.

17) Att ention should be drawn t o the envi ronmental aspects of b attery disposal.

18) Us e apparat us in moderat e climate.

19) The ap paratus sha ll not be exp osed to drip ping or spl ashing and th at no objec ts filled with l iquids, such as vases, s hall be placed on the ap paratus.

20) Us e only with a cart , stand, tr ipod, bracket, or tab le specified by the manu facturer, or sold with t he apparatus. When a car t is used, use caut ion when mo ving the cart /apparatus comb ination to avoid injur y from tip-over.

The batt er ie s shall not be exposed to excess iv e he at such as, fire or the like.

WARNI NG:

The excessive sound pressure from earphones and headphones can cause hearing loss.

WARNI NG:

This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. When servicing use only identical replacement parts.

This m arking indicates tha t this product shou ld not be dis posed with ot her hous ehold was tes. To prev ent possible harm t o the environment or hum an health from u ncontrolled waste di sposal, recycle it resp onsibly t o promote the s ustainable reus e of material resource s. To return y our used d evice, pl ease use the re turn and coll ection systems or cont act the retailer wher e the produ ct was purcha sed. They can ta ke this product for envi ronmental safe r ecycling.

-2-

Page 5

SAFETY AND WARNINGS

High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel.

To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.

Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver.

Do not block the ventilation holes in the back cover. Adequate ventilation is essential to prevent failure of electrical components.

Do not trap the power supply cord under the television receiver.

Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls.

Do not place your television on an unstable cart, stand, shelf or table. Serious injury to an individual , and damage to the television, may result if it falls. Recommended to utilize rear mount screw holes for anti-tipping (hardware not included).

When the television rec ei ve r is n ot u sed for an extended period of time , it i s ad vi sa ble to disconnect the AC power cord from the AC o ut let.

Avoid exposing the television receiver to direct sunlight and other sources of heat. Do not stand the television receiver directly on other products which give off heat, e.g. video cassette players and audio amplifiers. Do not place naked flame sources, such as lighted candles on the television.

Dim:515*320mm (不包括底座）

If the television is to be built into a compartment or similar enclosure, the minimum distances must be maintained. Heat build-up can reduce the service life of your television, and can also be dangerous.

-3-

Page 6

INTRODUCTION

Antenna

Main features

Accessories

55" wide scr een for a complete ho me thea ter exp erien ce Super slim LCD TV w ith LED backlight 3840 x 2160 na tive resolut ion for UHD pe rform ance Integ rated ATSC TV tun er for HDTV br oadca st rece ption Beaut iful color depth wi th a contrast ratio of 6000: 1 HDMI inputs for tru e digit al connections

Specifications

Resolution:

Aspect Ratio:

TV System:

Video Signal System:

Receiving Channel:

Input Power Voltage:

Power Consumption:

YCb(Pb)Cr(Pr) Input

Viewing Picture Size(diagonal)

3840 x 2160

16:9

170W

Audio Output Power(THD 7%): 2 x 10W

NTSC

Cable :1-135/ Air: 2-69(ATV&DTV)

High-Definition Multimedia Interface(HDMI) Input x 3

x 1

55"class (55"diagonal)

Composite Video Input

AC 100-240V 50/60Hz

ATSC Digital system and NTSC Analog system

x 1

1238 x 260 x 777 mm

48.74 x 10.23 x 30.59 inch

Audio Input

Headphone Output

Coaxial

USB 2.0 Input

Dimensions (approx) with stand fitted(WxDxH)

Net weight 13.3 kg (29.3 lbs) with STAND

x 1

x 2

x 1

Infrared Remote Contr ol .. .. .. .............

User’s M anu al . .. ................. .. .. .. .. ...

Battery(AAA) ...... .. .. .. ................... .. . 2

Screws........... .. .. .. ................... .. .. .. . 4

Base stand......... .. .. .. ................... .. .. 2

Component adaptor cab le .. .. .. ...........2

“This pr od uc t is manufactured, distri bu te d, serviced and warranted e xc lu sively by SHENZHEN MTC CO., LTD.. “JVC” is t he t ra de mark of JVC KENWOOD Corpo ra ti on, used by such company under li ce ns e.”

-4-

LAN

x 1

The Adopted Trademark s HDMI, HDM I High-Defi nition Mu ltimedia In terface, and the HDMI Lo go are tradem arks or registered t ra demar ks of HDMI Li censing Admin istrato r, Inc. in the Unit ed Stat es and other countries.

Manufa ct ur ed under license from Dol by L ab or atories. Dolby, Dolby Audio, and the double -D s ym bol are trademarks of Dol by L ab or atories.

Page 7

INSTALLATION

Front panel

REAR Connections

SIDE Connections

All the terminals are(from left to right): HEADPHONE, COAXIAL, LAN, HDMI3, HDMI2, RF.

VID EO L ROPT ICAL

All the terminals are (from left to right):

HDMI1(ARC), USB2.0, USB2.0, VIDEO/YPbPr, AUDIO.

1: Rem ote control sensor.

2: Ind icator LED: RED STANDBY.

3: Key b oard

≤8m

Bottom

1. Mid dle Button: press long time for “power” funct ion;

2. Up/ Down: CH+/-

3. Lef t/Righ: VOL-/+

pres s once for “source” func tion

The keyb oa rd i s located at the bottom left ne ar t he r ight side of signal indic at or.

KEYBOARD

Rocker

HDM I3

HDM I2

HEA DPHON E COAX IAL L AN

HDM I1(AR C)

USB 2.0 USB 2.0 V/Y PbPr AUD IO

7 8 9

1 2

VOL CH

MTS/AUDIO

CC/SUBTITLE

TTS

EXIT

INFO

PICTURE

SOUNDASPECT

-5-

Page 8

INSTALLATION

Antenna

PRESET MODE (HDMI)

800*600

1024*768

37.88

48.36

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

1366*768

47.7

1280*768

47.3

1920*1080

67.5

3840*2160

67.5

112.5

135

3840*2160

CABLE

When s hipped from the factor y, the Signal Type option is for the RF co nnector (F-type) set t o the" AIR" (Over-the air ant enna) mode.

Power connec tion

Plea se note: After unpackin g, allow the TV to re ach ambient room tempe rature before conn ection the TV to th e mains power socket. Conn ect the pow er cord plug to t he mains power socket.

OUTDOOR OR INDOOR ANTENNA

Note : Aeri al connec tions:F con nector. Inpu t impenda nce:75 unba lanced.

PLUG

75Ω CABLE

ANTENNA OR CABLE TV

ADAPTER (NOT SUPPLIED)

TWIN-LEADE R FEEDER (300Ω)

OUTDOOR OR INDOOR ANTENNA

(N OT SU PPL IE D)

-6-

Page 9

Prep are to place the TV w ith the display side dow n on a flat surface. Due to th e size and weig ht of this TV, th e use of 2 people i s recommended when mov ing it. Ensure the table o r desk y ou use provides a flat, to tally clean surface, a nd use a soft clo th betwee n the face of the TV and t he table to protect the TV's screen.

1. Loc ate the 2PCS of the base sta nd and insert it into the ga p in the bottom o f the TV , and chec k that it is securely held i n place as per a) below.

2.Lo ck 4 screws in the designa ted location as per b) bel ow and check each screw is f irmly tigh tened.

INSTALLATION

Base Stand Assembly Instruction

The ba se stand

4 x Screws( )4X18MM

-7-

Page 10

INSTALLATION

AV Equipment

You can use the rear input terminals as follows.

HDMI

VIDEO EQUIPMENT with YPbPr

HDM I1(AR C)

USB 2.0 USB 2.0 V/Y PbPr AUDI O

HDM I3

HDM I2

HEA DPHON E COAXI AL LA N

HDMI

-8-

1 WAN2

Video Equipments: VCR, Multi Disc Player, DVD Player, Camcorder, Video Game, etc. Video format that YPbPr supports: 480i, 576i, 480p, 720p, 1080i, 1080p, 2160p.

Page 11

Wall Mount

Instruction for Wall Mount

A wall mount kit (purchased separately) would allow you to mount your JVC TV on the wall. For detailed information on installing the wall mount, refer to the instructions provided by the wall mount manufacturer. It is strongly recommended to contact a technician for professional assistance for wall mount installation. is not responsible for any damagJVC e to the product or injury to yourself or others resulting from the wall-mounting.

This TV is compatible with a 400mm x 200mm mounting hole pattern.JVC

- Do not mount your TV at more than a 15 degree tilt.JVC

- Always use two people to mount the TV to a wall.

- Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

- 4 pcs of type M6 screws are required for installing the wall mount bracket to your TV. Do not use screws that are longer than 10 mm. Screws that JVC are too long may cause damag e to the inside of the TV set.

- Do not fasten the screws too tight for this may damage the TV or cause the TV to fall, resulting in personal injury. is not liable for these kinds of JVC incidents.

-9-

Dimensions for Mounting Hole Pattern

Page 12

8 9

VOL CH

MTS/AUDIO

CC/SUBTITLE

TTS

EXIT

INFO

PICTURE

SOUNDASPECT

Overview of remote control

General Description

Loading batteries:

1) Remove the lid of the battery compartment.

2) Insert 2 size AAA batteries with polarities as indicated inside the compartment.

3) Replace the lid. Note:

1) A loading of batteries should be last one year under normal use.

2) If you don't intend to use the remote control for a long period of time, remove batteries to avoid damage due to leakage.

3) Do not mix old and new batteries or different types.

4) Do not throw batteries into fire or water.

5) The batteries (battery pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or the like.



 



 

 

 

-10-

Page 13

8 9

VOL CH

MTS/AUDIO

CC/SUBTITLE

TTS

EXIT

INFO

PICTURE

SOUNDASPECT

1. POWER: Turn the TV on and off.

2. MUTE: Press this button to cut off the sound of the TV set temporarily, press again to resume.

3. Digital Buttons(0-9, -): Directly select channel with digital buttons.

4. CH : Switch to the previous program.

5. YouTube: If network connects, press this key to view YouTube directly.

6. VUDU: Press it to show channel list and favorite list on screen.

7. : Press it to go to App home page.

8. NETFLIX: If network connects, press this key to view NETFLIX directly.

9. INFO: Display the program information

: Display the main menu or exit the

current menu.

11. OK: Validation key.

12. Arrow button : Use to select on-screen menu items and change menu values.

13. : Return.

14. EXIT: Exit the menu.

15. COLOR It's used as it's showed in the EPG or Program Edit menu.

16. : This button is used to switch among different sources, Select a source and press OK button to confirm

10.

s pqtu

BUTTONS:

General Description

Overview of remote control



 



 

 

 

-11-

Page 14

8 9

VOL CH

MTS/AUDIO

CC/SUBTITLE

TTS

EXIT

INFO

PICTURE

SOUNDASPECT

ICTURE icture mode17. P : Select p .

18. VOL -: Press these buttons to adjust the volume.

19. CH :

20. DIGITAL MEDIA PLAYER CONTROL BUTTON: Include play/pause, stop, backward, forward is used in USB mode . Please refer to relevnat instructions in the section of multimed player.

21. CC/SUBTITLE:

MTS/AUDIO: In USB mode, press this button to switch audio track when movie is playing. In TV mode, press this button

to switch MTS or Audio Language.

23. ASPECT: Press this button to set aspect, such as 16:9,4:3,native,ect.

24. TTS: Press this button to set TTS on or off.

25. SOUND: Press this button to select sound mode.

˄/˅ Press these buttons to change

channel upward or downward.

In USB mode, press this button to switch subtitles when movie is playing.

22.

General Description

Overview of remote control



 



 

 

 

-12-

Page 15

Installing Batteries in the Remote Control

General Description

Antenna connection

Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the antenna jack. For details Please refer to the following drawing.

Use a 75ohm - 300ohm converter

300ohm coaxial cable

Antenna feeder

ANT IN

75oh m co axial cable

Ante nn a cable

Antennas with 300 W flat twins Leads

Antennas with 75 W Round Leads

External Connection

The batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

Inst alling Batteries

Open the battery compa rt me nt cover on the back side .

Insert two 1.5V AAA size bat te ri es i n correct polarity. Don´t mix old or used batteries with new o ne s.

Closed the cover.

Point the r em ote towar ds t he r emote control s en sor of the TV a nd use it within 8 me te rs.

Put the use d ba tteries i nt o th e recycling bin si nc e they can nega ti vely affec t th e environ me nt.

-13-

Page 16

External Connection

Connecting VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system.

VCR Rear Panel

TV Rear Panel

White

Red

ANT

ANT OUT S-VIDEO

AUDIO OUT

Red

Blue

Green

VIDEO OUT

Audio Cable (Not supplied)

YPbPr cable( supplied) Not

RF Cable (Not supplied)

Follow the instructions in Viewing a VCR or Camcorder Tape to view your VCR tape. Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable.

1. Unplug the cable or antenna from the back of the TV.

2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3. Connect an RF Cable between the ANT OUT terminal on the VCR and the ANT IN terminal on the TV.

4. Connect a Component Cable between the COMPONENT [Y, Pb, Pr] jacks on the DVD player and YPbPr jack on the TV.

5. Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AUDIO L and AUDIO R jacks on the TV.

Note:

1. Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

2. When connecting an external device, match the color of the connection terminal to the cable.

Pb Pr

Y/V

V/YPbPr

AUDIO

Red

Blue

Green

Red

White

-14-

HDMI 3

HDMI 2

HEAD PHONE CO AXIAL LAN

Page 17

External Connection

Connecting a Camcorder

The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR.

Each Camcorder has a different back panel configuration. When connecting a Camcorder or DVD, match the color of the connection terminal to the cable.

Video

Green

1. Connect a Video Cable between the AV VIDEO in jacks on the TV and the VIDEO OUT jack on the camcorder.

2. Connect Audio Cables between the AUDIO L and AUDIO R jacks on the TV and the AUDIO OUT jacks on the camcorder.

3. Connect a Video Cable between the AV VIDEO IN jacks on the TV and the VIDEO OUT jack on the DVD.

4. Connect Audio Cables between the component IN AUDIO L and R jacks on the TV and the AUDIO OUT jack on the DVD.

Notes:

1. Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

2. When connecting an external device, match the color of the connection terminal to the cable.

White

Red

Camcorder

Video Cable (Not supplied)

Audio Cable (Not supplied)

Pb Pr

Y/V

V/YPbPr

AUDIO

Green

Red

White

-15-

Page 18

External Connection

Connecting Digital Audio System

This connection can only be made if there is a HDMI Output connector on the external device.

HDMI Cable (Not supplied)

What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. Multimedia interface is a more accurate name for it especially because it allows multiple channels of digital audio (5.1 channels).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital audio.

Each DVD player/STB has a different back panel configuration.

Connect an HDMI Cable between the HDMI1, HDMI2, HDMI3 connector on the TV and the HDMI connector on the DVD player/Set-Top Box.

Notes:

1.Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

2.When connecting an external device, match the color of the connection terminal to the cable.

-16-

HDMI 3

HDMI 2

HEAD PHONE COAXI AL LAN

Page 19

Connecting PC

External Connection

Supporing Signals

Input

Mode

Digital

Analog

ATSC

CVBS

PAL/NTSC

PAL-M/PAL-N/NTSC M

The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.

5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH.

Connect an OPTICAL Cable between the OPTICAL jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the OPTICAL terminal: Decrease the gain (volume) of the TV, and adjust the volume level with the volume control.

Digital Audio System's

Digital Audio System

(Black)

TV Rear Panel

COAXIAL

Resolution

Input

Component

60Hz 60Hz

50Hz/60Hz

480i 480p 720p

50Hz/60Hz

1080i

HDMI

50Hz/60Hz

480p 720p

60Hz

1080i

Vertical

Frequency

50Hz/60Hz

1080p

50Hz/60Hz

1080p

3840x2160

24Hz/25Hz/30Hz/60Hz

-17-

HDMI 3

HDMI 2

HEAD PHONE COAXI AL LAN

(Not included)

Page 20

Basic Operations

Menu Operation

1 Input Setup

Press key on the remote control to enter "INPUT SOURCE" menu. There are these options for you to select: "TV", "AV","Component", "HDMI1", “HDMI2",

“HDMI3", “USB". Use t/ukey to select a input source and press OK key to confirm.

2 Channels Selection

There are four ways to select channel:

1) Using number keys, and OK keys on the remote control to select channel directly.

To select channel 90, press . When you use the number buttons, you can directly select channels that were either erased

or not memorized.

2) Using CHr/s key on the remote control or on your TV to select channel. When you press the CHr/s key, the TV changes channels in sequence. You will see all

the channels that the TV has memorized. You will not see channels that were either erased or not memorized.

3) Press CH key to return to previous channel, press it again to return to current channel.

To quickly switch between two channels that are far apart, tune to one channel, then use the

number keys to select the second channel. Then use the CH button to quickly

alternate between them.

CH is not activated if no channel has been changed after TV turning on.

4) Select channels from "Channels List" or "Favorite List". Press OK key to choose from "Channel List" menu.

3 Volume Adjustment and Mute Setup

Volume adjustment

Press VOLr/s key on the remote control or the TV to display "Volume" menu, adjust the volume of TV between 0 to 100 by using VOLr/skey:

Input Source

HDMI 2AV Component HDMI 1

Input Source

TV AV

Component

HDMI 2 HDMI 3

Input Source

HDMI 3 USB

HDMI 1

-18-

Page 21

Basic Operations

Menu Operation

4 Current Channel Information

Press “INFO” key on the remote control to view current channel information, the indications of channel information are listed in the following table.

Press “EXIT” key on the remote control to exit this OSD.

00:00 01/01/1970

( To increase the volume, press VOLr key; ( To decrease the volume, press VOLs key;

Mute

Press “ ” and the sound cuts off. The MUTE icon will appear in the lower-left corner of the screen. To resume sound, press the “ ” button again, or simply press the VOLr key.

Mute

-19-

Page 22

Picture Mode

Comtrast 70

Brightness

Color

Sharpness

Tint

Backlight

Color Temperature

50 70

100

1. Press key to display the main menu on the screen.

2. Press p/q key to select "Picture" option.

3. Press u key to enter "Picture" submenu.

4. You can also press the PICTURE key on the remote control to select one of the picture settings.

Picture Mode

Your TV has four picture settings (Sports, Normal,Mild,Save, User) that are preset at the factory. Only "User" mode can be set to your preference by adjusting particular items such as Contrast, Brightness, Color, Sharpness.

1. Press p/q key to select "Picture Mode" option.

2. Press p/q key to select one picture mode.

User settings for PICTURE (Contrast, Brightness, Color, Sharpness,Tint)

Your set has several settings which allow you to control picture quality.

1. Press ▲/▼ key to select a particular item.

2. Press t/u key to decrease or increase the value of a particular item. Note: The adjusted values are stored according to the selected particular item.

Backlight

You can Change the brightness of the entire screen according to your preference.

1. Press p/q key to select "Backlight" option.

2. Presst/u key to increace or decreace the backlight value.

Color Temperature

You can change the color of the entire screen according to your preference.

1. Press p/q key to select "Color Temperature" option.

2. Press p/q key to select one color temp.

Contrast: Adjusts the lightness and darkness between objects and the background. Brightness: Adjusts the brightness of the picture. Color: Adjusts the colors, making them lighter or darker. Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull. Tint: Adjusts the Tint of the picture.

Backlight: Adjusts the brightness of the whole screen.

Picture

Menu system instruction

Cool: Makes whites bluish. Standard: Makes whites nature Warm: Makes whites reddish.

Picture

Sound

Function

Time

Options

Parent Control

Channel

-20-

Page 23

1. Press key to display the main menu on the screen.

2. Press p/q key to select "Sound" option.

3. Press u key to enter "Sound" submenu.

4. You can also press the SOUND key on the remote control to select one of the sound.

Sound Mode

You can select the type of the special sound effect to be used when watching a given broadcast. Your TV has five sound settings (“Standard”, “Music”,“Movie”, “Sports”,“User”) that are preset at the factory.

1. Press p/q key to select "Sound Mode" option.

2. Press p/q key to select one sound mode.

Equalizer

Only can be adjusted in User mode.

1. Press p/q key to select “Equalizer" option.

2. Press t/u key to decrease or increase the value of the item.

Balance

If the volumes of the left speaker and the right speaker are not the same, you can adjust the "Balance" to suit your personal preference.

1. Press p/q key to select "Balance" option.

2. Press t/u key to decrease or increase the value of the item.

AVL

Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “AVL” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output whenthe modulation signal is low.

1. Press p/q key to select “AVL” option.

2. Press p/q key to select “On” or “Off”.

1. Press p/q key to select "Surround sound” option.

2. Press p/q key to select “Surround” or “Off”.

Video Description

1. Press p/q key to select "Video Description” option.

2. Press p/q key to select “On” or “Off”.

Surround sound

This is used to turn on surround sound to gain better sound effect.

Sound

Menu system instruction

l Standard: Selects the normal sound mode. l Music: Provides clear and live sound for music. l Movie: Provides live and full sound for movies. l Sports: Emphasizes bass over other sounds. l User: Selects your custom sound settings.

Sound Mode

Equalizer

Balance

AVL

Surround Sound

Digital Audio Output

Audio Language

DAP

HDMI ARC

Video Description

-21-

Page 24

Menu system instruction

SOUND

This is used to .

This is used to DAP.

Digital Audio Output

set digital audio output

1. Press p/q key to select "Digital Audio Output” option.

2. Press p/q key to select “Auto” or “PCM”.

Audio Language

You can set the first and secondary language for audio.

DAP

set

1. Press p/q key to select "DAP” option.

2. Press key to enter “DAP” submenu.

HDMI ARC

Turn on or turn off the HDMI ARC function.

1. Press key to display the main menu

on the screen.

2. Press p/q key to select “Function” option.

3. Press key to enter “Function” submenu.

Noise Reduction

Press p/q key to select the Noise Reduction mode. You can select the right mode to match the pictures.

MPEG Noise Reduction

Press key to select the mode: off/low/middle/high. The picture will be better when it is in “high” mode.

Aspect Ratio

1. Press p/q key to select “Aspect Ratio” option.

2. Press p/q key to change the size of the picture

on the size of the picture on the screen.

t/u

Function

Noise Reduction

MPEG Noise Reduction

Aspect Ratio

CEC Link Setup

HDMI EDID

Netflix Deactive

Netflix ESN

Netflix Version

VUDU Deactivation

TTS

DAP

DAP Enable

DAP Mode

Surround Virtualizer

Dialog Enhancer

Auto Volume Control

Off

Standard

High

Low

Off

-22-

Page 25

CEC Link Setup

Enable CEC link

Auto Power On

Auto Standby

Off

Menu system instruction

Function

DTVi

Turn on/off ginga function

CEC Link Setup

1. Press p/q key to select “Link Setup” option.

2. Press OK or ukey to enter “Link Setup” submenu. Enable Link: Press t/u to turn on/off the link setup. Auto Power On: When this option is “On” and the TV is in standby mode. To turn on the DVD can also turn the TV at the same time. Auto Standby: When this Option is “On” and the TV is on, to turn off TV can also turn the DVD into standby mode.

HDMI EDID

This function is only used in HDMI mode.

1. Press p/q key to select “ HDMI EDID” option.

2. Press p/q key to select “ 2.0” or “ 1.4”.

Netflix Deactive

1. Press “p/q" key to select “Netflix Deactive" option.

2. Press “u” or "OK" key to confirm.

3. Press "Yes" to confirm again, the Netflix will be activated.

Netflix ESN

Display the Netflix Esn information.

Netflix Version

Display the Netflix version.

-23-

Page 26

Off Time

On Time

Sleep Timer

Auto Sleep

Auto Sync

Clock --:--

Time Zone

1. Press key to display the main menu on the screen.

2. Press p/q key to select "Time" option.

3. Press u key to enter "Time" submenu.

Sleep Timer

1. Press p/q key to select "Sleep Timer" option.

2. Press p/q key repeatedly until the desired time appears (Off, 10mins, 20mins, 30mins, 60mins, 90mins, 120mins, 180mins, 240mins). Notes: The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs.

Press p/q key to select whether to open the Nosignal Power off features. If this function is opened, the TV will power off in ten minutes when there is no signal.

When Auto Sync is on, the clock is got from DTV streams; Set the clock when Auto Sync is off.

1. Press p/q key to select "Time Zone" option.

2. Press p/q key to select time zone.

Off Time

In "Off Time” item, press ubutton or button to enter the submenu, set the day & time to turn off the TV set.

On Time

In "On Time” item, press ubutton or button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can also choose which day to control you TV set in a week.

Notes: When the time is less than 60 seconds, remind information will be displayed on the screen. Press any key button to cancel timer function.

Auto Sleep

Auto Sync

You can modify the time of your TV set in Manual mode. In Auto mode, the “clock” is decided by the DTV signal.

Clock --:--

Time Zone

You can choose it to modify your time zone in the TV set.

Menu system instruction

Time

-24-

Page 27

Menu system instruction

Options

1. Press key to display the main menu on the screen.

2. Press p/q key to select "Option" option.

3. Press u key to enter “Option" submenu.

1. Press p/q key to select “ " option.

2. Press OK or u key to select a proper language for OSD

OSD Time

Set the preferred amount of time for the OSD to be displayed on the screen.

1. Press p/q key to select “Closed Caption" option.

2. Pressp/q key to select CC mode.

Reset

1.Press “p/q" key to select "Reset" option.

2.Press “u" or "OK" key to confirm.

3.Press "Yes" to confirm again, TV will turn off automaticly and change all setting to factory setting.

Network Configuration

Please refer to "Network setting"behind.

Software Update(USB)

When the TV need to be updated, please copy the new software to a USB storage and inset the USB storage to TV, then operating by following steps.

1.Press “p/q" key to select "Software Update" option.

2.Press “u” or "OK" key to confirm.

3.Press "Yes" to confirm again, the TV will update by USB, Please wait a few minutes and don't turn off the power, it will turn off automaticly when updating is finish.

Internet Update Check

This can update TV through internet.

Network Update Information

Display the .

User Mode

1.Press “p/q" key to select "User Mode" option.

2.Press “u” or "OK" key to confirm.

OSD Language

Closed Caption

Network Update Information

OSD Language

OSD Time

Closed Caption

Reset

Network Configuration

Software Update(USB)

Internet Update Check Network Update Information User Mode

-25-

Page 28

The " " feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Password before any of the lock restrictions can be set up or changed. 1

(the

default 0000 and universal password is 1980)

Set the Lock function on or off.

key to select "On" or "Off".

Set Password

Password

"Set Password" submenu. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor skipped to “Confirm Password” item, re-enter the same 4 digits, and your new password has been memorized.

USA TV

key to open USA TV menu.

USA MPAA

key to open USA MPAA menu.

Canada English

key to open Canada English menu.

Parent Control

. Press p/q key to select “Parent Control" option.

2. Press or u key to enter “Parent Control" submenu, "Enter Password" menu

will appear,enter your 4-digit password to enter “Parent Control” submenu \ password is , the .

Parent Control

1. Press p/q key to select “Parent Control " option.

2. Press p/q

1. Press p/q key to select "Set " option.

2. Enter your 4-digit password to enter

When the programs is locked, you can also press the menu key, Info key and so on. Then you can press t/u key to call back the input-password window.

Parental Guidance

This option only used in DTV mode.

1. Press p/q key to select “Parental Guidance" option.

2.Prsee p/q key to select the lock level of the Parental Rate.

1. Press p/q key to select " " option.

2. Press OK

1. Press p/q key to select " " option.

2. Press OK

1. Press p/q key to select " " option.

2. Press OK

Menu system instruction

Parent Control

Please Enter Password

Parent Control

Set Password

USA TV

USA MPAA

Canada English

Canada French

RRT Setting

RRT Reset

-26-

Page 29

Canada French

key to open Canada French menu.

RRT Setting

key to open RRT Setting menu.

RRT Reset

RRT Seset

key to open RRT Seset menu.

1. Press p/q key to select " " option.

2. Press OK

1. Press p/q key to select " " option.

2. Press OK

1. Press p/q key to select " " option.

2. Press OK

Menu system instruction

Parent Control

Set Password

USA TV

USA MPAA

Canada English

Canada French

RRT Setting

RRT Reset

-27-

Page 30

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system).

1. Press key to display the main menu on

the screen.

2. Press p/q key to select "Channel" option.

3. Press OK or u key to enter "Channel" submenu.

Antenna

1.Press p/q key to select "Antenna" option.

2.Press p/q key to select "Antenna" or "CABLE".

Auto Search

1. Press p/q key to select "Auto Search" option.

2. Press u or OK key to confirm. then a notice window will be displayed on the screen. Select "Start" to start search or "Cancel" to cancel it. When searching, press EXIT key to exit tuning at any

moment. Press key to skip DTV tuning when

searching DTV, skip ATV tuning when searching ATV, skip CATV tuning when searching CATV.

3. After all the available channels are stored, the searching menu will exit.

Program

After the program is searched, select “Program Edit” in the “Channel” menu, press “OK” button, program can be edited such as delete or skip according to the user's habit.

Skip (Blue) Button This function can help shield certain program. Program skips when selecting program by the “ / button on the TV or remote control.

1. Select the program to be shielded in the“Program Edit”.

2. Press “Skip” (Blue) button, the skip mark is displayed at the left side of the program and this program is shielded.

3. To cancel the Skip function, enter the channel edit menu, select the shielded program and press “Skip” (Blue) button, the skip mark at the left side of the program disappears then program is recovered.

Delete (Red) Button This function can help delete program.

1. Select the program to be deleted in the "Program Edit".

2. Press "Delete"(Red) button, the program will be deleted.

Edit

pq”

Menu system instruction

Channel

Program Edit

5.1 G lo bo HD

5.2 G lo bo HD

Delete

Return

EXIT

Skip

Fav

Antenna

Auto Seacin

DTV Manual Search

ATV Manual Search

Signal Information

Program Edit

-28-

Page 31

Favorite(Yellow) button This function can help store the favorite program then these programs can be quickly selected.

1. Select the program which is favorite.

2. Press “Fav”(Yellow) Button, the favorite mark is displayed at the left side of the program and this program is store into the Favorites.

3.To cancel the Favorite function, enter the program edit menu, select the program and press “Fav”(Yellow) button, the favorite mark at the left side of the program disappears.

DTV Manual Search

Enter digital number and press “OK” to select DTV Channel.

ATV Manual Search

1. Press p/q key to select "ATV Manual Search" option.

2. Press u or OK key to enter submenu.

1. Press p/q key to select the second item.

2. Press t/u key to select current channel.

1. Press p/q key to select the third item.

2. Press t/u key to select a better frequency for current channel.

1. Press p/q key to select “ " option.

2. Press “OK”or u key ,you can see the i of the DTV channel.

Current CH

Fine-Tune

Signal Information(Used only in DTV)

Signal Information

nformation

Menu system instruction

Channel

Channel 40

Name TV Globo

Modulation ATSC

Quality 100

Strength 100

DTV Manual Search

UHF CH 40

ENTER

Bad Normal Good

DTV 0

No Signal

Return

ATV Manual Search

Current CH 12

Fine-Tune

Save Return

Frequency 205.25 MHz

-29-

Page 32

1.Press the “ ” to enter, then pitch on the ”Options”,and press “OK” or click the

right button to enter the submenu.

2.Pitch on the "Network Configuration",and press "OK" or click right button to enter the "Network Configuration".

3.When the wired network is used, if select dynamic IP address setting, pitch on the "DHCP" in the "Network Configuration", then click the "Setting", and press the "OK"button to enter. If select static IP address setting,pitch on the "Static" in the "Network configuration", then setting up the IP,Nemask,Gateway and DNS in sequence.When the setting complete,pitch on the "setting" and press the"Enter".

Network Setting

Picture

Sound

Function

Time

Options

Parent Control

Channel

STATUS

WIFI LAN

MODE : LAN

IP: 172.16.67.1 30

DNS: 172.16.66.254

GATEWAY: 255.255.254.0

Fail

EXIT

Exi t

OSD Language

OSD Time

Closed Caption

Reset

Network Configuration

Software Update(USB)

Internet Update Check Network Update Information User Mode

-30-

Page 33

Setting

IP 169. 254. 018. 061 Netm ask 255. 255. 2 55. 000

Gate way 172. 016. 0 88. 254

DNS 172. 016. 064. 05 8

STATUS

WIFI LAN

Netw ork Configuration DHCP

Fail

Network Setting

4.If shows "Success"，the "WLAN" on the bottom right corner will turn to green from

red, and it means the network connect successfully; If shows "Fail"，

it means the network can not connect, please check whether the net wire and router

connect successfully or not.

5. Select the "WIFI" in the Network Configuration before using WIFI connecting.

STATUS

WIFI LAN

Setting

Netw ork Configuration Static

IP 172. 016. 067. 130 Netm ask 255. 255. 2 54. 000 Gate way 172. 016. 0 66. 254 DNS 172. 016. 064. 08 1

STATUS

SSID Not Connected Pass word

Netw ork Configuration DHCP

IP 000. 000. 000. 000 Netm ask 000. 000. 0 00. 000

Gate way 000. 000. 0 00. 000

DNS 000. 000. 000. 00 0

Scan AP

Setting

WIFI LAN

Scanning...

-31-

Page 34

Pitch on the "Setting"，press the "OK" to confirm. If shows "Success"， the "WIFI" on the bottom right corner will turn to green from red, and it means the network connect successfully; If shows "Fail"， it means the network can not connect, please check whether the wireless router connects successfully or not.

Network Setting

STATUS

SSID Not Connected Pass word

Netw ork Configuration DHCP

IP 000. 000. 0 00. 000 Netm ask 000. 000. 0 00. 000

Gate way 000. 000. 0 00. 000

DNS 000. 000. 000. 00 0

Scan AP

Setting

WIFI LAN

Fail

-32-

Page 35

Get ready to watch thousands of TV shows and movies.

Enter your email address

1 2

6 7 8 9 0

a s

hjk l

z xcv

n m

@gmail.com

@yhoo.com.tw

@hotmail.com

!#$

com

Back

Remember Email

Email address

Need help signing in? Visit http://help.netflix.com

Internet

Press “ ” key to enter internet interface

1. NETFLIX

 Use arrow key to Select button, then press “ ” key to enter NETFLIX.

 Use arrow button to select one video and press “OK” key to play.

Press “ ” key to exit playing.

 Use arrow key to browse the pages. press “ ” key to return to main menu and

press “EXIT” key to exit.

2. Youtube

 Use arrow key to Select button, then press “OK” key to enter Youtube.

 Use arrow button to select one video and press “OK” key to play.

Press “ ” key to exit playing.

 Press key to open or close control menu when playing.

-33-

Page 36

Internet

 Press key to enter search interface, input the keyword and then press “OK” to search videos.

VUDU

Discover, Watch & Collect the Latest Movies & TV

PANDORA

Welcome to pandora

Do you have a pandora account?

I have a Pandora Account

I am new to Pandora

3.VUDU

 Use arrow key to Select button, then press “OK” key to enter VUDU.

4.pandora

 Use arrow key to Select button, then press “OK” key to enter pandora.

-34-

Page 37

Internet

5.Twitter

 Use arrow key to Select button, then press “OK” key to enter Twitter.



“OK” key to log in.

 Use arrow key to browse the pages. press “ ” key to return to main menu and

press “EXIT” key to exit twitter.

Red key: log in or log out twitter. Green key: refresh current page. Yellow key: write new tweet. Blue key: Search tweet.

Input the right Email and password, then select “Authorize app” button and press

-35-

Page 38

Internet

6.Facebook

 Use arrow key to Select button, then press “OK” key to enter Facebook.

 Input the right Email and password,

select “log In” button, then press “OK” key to log in.

 Press arrow key to browse the pages and press “OK” key to view.

Press “ ” key to return the main menu.

Press “EXIT” key to exit Facebook.

Red key: log in or log out Facebook. Green key: refresh current page. Yellow key: sign “like” or “unlike” for current content.

Blue key: view comments and add comments.

7.Accuweather

 Use arrow key to Select button, then press “OK” key to enter .

 Input a city or zip code press select to get the weather information.

Accuweather

-36-

Page 39

Internet

8.Screencast

Use arrow key to Select button, then press “OK” key to enter .

Screencast

-37-

Page 40

8 9

1 2

VOL CH

MTS/AUDIO

CC/SUBTITLE

TTS

EXIT

INFO

PICTURE

SOUNDASPECT

Digital Media Player

This TV is embedded with one USB port digital media player. It can find the devices support USB1.1/2.0,including flash disk, USB hard disk and digital camera. It supports functions as: Display pictures. Play music files, Play video files, Display text files. Notice:

1. In order to avoid affecting the user's viewing experience, please use the better quality and shorter USB cable

2. Play, preview some of the non-standard files may appear abnormal, please understand. Explain:

1. Under the USB channel，you can use only the remote control.

2. Play Control menu to enter the playing surface to press the menu button pop-up menu

Remote Control Button

Description of Buttons:

Introduction

Buttons Function

MTS/AUDIO

CC/SUBTITLE

Track switch (video) Subtitle switch (video)

Play/Pause

Backward Forward

RED

YELL OW

AB Loo p(Video) Goto Ti me( )Video

INFO

Show/Hide movie info (video)

MTS/AUDIO

RED

YELLOW

INFO

CC/SUBTITLE

Motion-JPEG

Data

Picture

Video

Format

JPEG

-38-

Page 41

Troubleshooting

If you have any problem, check the couter measures for each symptom listed below. The following symptoms may have . adjustment rather than actual malfunction of the unit. If the trouble persists, contact the

been caused by inappropriate

Customer Care

Centre, see back page for contact details

Symptom s

No power

No pictur e

Good pict ure but no sound

Good sound but abnormal color or no picture

No respon se to remote

control

Colored d ots may be present o n the screen

Possibl e solutions

Please check the power cord

. Unplug the power cord and plug it in after 60 seconds and restart the TV.

plugged in and that the power

outlet works

Please check antenna connection. Station may problems, please tune to another station. Please adjust the settings of contrast and brightness.

be experiencing

Please increase the volume. Please check TV is under mute mode, press MUTE button on the remote control. Please check sound settings

If external devices are being used, check their volumes are not set too low or turned off. If using AVI or Component inputs, please make sure cables are connected properly and not loose.

Batteries of remote control may have exhausted, if necessary, please change the batteries. Clean the remote control lens. The distance between LED TV and remote control should be within 8m, within

recommended operating angle and path is free of obstructions.

Although the LED screen is made with high-precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LED screen. This is a structural property of the LED screen and not a malfunction.

Please check antenna connection and antenna condition. If using Component input, please check Component connections, incorrect or loose connections may cause colour problems or cause the screen to be blank.

Keep the TV away from noisy electrical sources such as cars, hair dryers, welders, and all optional equipment. Electrical atmospheric interference such as local or distant lightning storms may cause picture to break up. When installing optional equipment, leave some space between the optional equipment and the TV. Check the antenna and connection. Keep the antenna away from any power or input/output cables.

Picture is breaking up

Check your area is covered by Digital Video Broadcasts. Try re-tuning or manually tuning missing channels. Check that you are using the correct antenna type - please see pg.16 'Antenna connection'.

After Auto Tuning only some channels are available

-39-

Page 42

Troubleshooting

Check if the channel has been blocked in the main menu settings.

Please check connecting USB cable and power supply is connected. Hard drive has not been formatted. Please make sure USB disk is compatible and the multimedia data formats are supported.

Channel cannot be selected

USB not playing

Compression of video contents may cause distortion especially on fast moving pictures such as sports and action movies.

Picture is distorted, macroblock, small block, dots, pixelization, etc

Black bars on each side will be shown on HD channels when displaying SD (4:3) contents. Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV. Adjust picture size option on your external device or TV to full screen.

Noise from speaker

Check cable connections, make sure a video cable is not connected to an audio input. Low signal level may cause sound distortion.

TV turns on automatically

Check if the On Timer is set to On in the Setup menu.

Picture is not shown in full screen

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

- Using cabinets or stands recommended by the manufacturer of the television set.

- Only using furniture that can safety support the television set.

- Ensuring the television set is not overhanging the edge of the supporting furniture.

- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

- Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.

- Educating children about the dangers of climbing on furniture to reach the television set or its controls If your existing television set is being retained and relocated, the same considerations as above should be applied.

The plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

WARNING

-40-

Page 43

Picture defects and the reason

Reference

-41-

Page 44