WIDE LCD PANEL TV
ENGLISH
ภาษาไทย
INSTRUCTIONS
HIGH-DEFINITION MULTIMEDIA INTERFACE
LT - 32EX18
LT - 42EX18
Contents
PREPARATION
Safety precautions ............................... 2
Remote control buttons and functions
Set up and connections ....................... 4
Initial settings ....................................... 6
Registering / Editing channels ............. 6
FUNCTIONS
Picture setting ...................................... 7
Sound setting ...................................... 9
Useful functions ................................. 10
Viewing Teletext ................................. 12
Watching Video or DVDs ................... 12
REFERENCE
Troubleshooting ................................. 13
Technical information ......................... 14
CH/CC List ......................................... 15
Specification ...................................... 16
GGT0213-001B-H
... 3
Thank you for buying this JVC LCD panel television.
JVC
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
• Follow this manual regarding
setup!
- Connect only to a 110-240 V,
50/60Hz AC outlet.
• Make enough room for
inserting and removing the
power plug!
• Place the TV as close to the
• Do not allow the TV to fall!
- Do not rest your elbows on, or
allow children to hang from the TV.
- There is a risk that the TV will fall
and cause injuries.
- Make use of the hole on the back
of the stand to prevent the TV
from falling easily. (P. 4)
outlet as possible!
- The main power supply for this
TV is controlled by inserting or
removing the power plug.
• Never cut or damage the
power cord!
- If the AC plug is not the right
If the TV is damaged
or behaving strangely, stop
using it at once!
➡ Unplug the power cord
and contact your retailer.
shape, or the power cord
is not long enough, use an
appropriate plug adapter or
extension cable. (Consult your
retailer.)
• Unplug the power cord when
going out!
- The power buttons on the
remote control and the TV unit
cannot completely
turn off the TV. (Make
appropriate
arrangements for
bedridden people.)
• Never dismantle the rear panel!
- It may cause an electric shock.
• Never obstruct the ventilation
holes !
- It may cause overheating or a fire.
• Handle LCD panel with care!
- Use a soft, dry cloth when
cleaning.
• For more details on installation, usage and safety ➡ Consult your retailer.
• Never place anything on the TV!
- Placing liquid, naked flames, cloths,
paper, etc. on the TV may cause a fire.
• Never expose to rain or moisture!
- To prevent fire or electric shock, never
allow liquids to enter the unit.
• Never insert objects into the cabinet
openings !
- It may cause a fatal electric shock.
- Take care when children are near.
• Hold the TV so as not to scratch the
screen!
- Do not touch the screen when carrying
the TV.
• Do not carry the TV on your own!
- In order to prevent accidents, ensure that
the TV is carried by two or more people.
•
When attaching the TV to the wall, use
the optional JVC wall mounting unit!
- Consult a qualified technician.
- See the included manual on
mounting procedures.
- JVC assumes no responsibility for
damage due to improper mounting.
•
Never listen to headphones at high volume!
- It may damage your hearing.
Never try repair the TV yourself!
➡
If the problem cannot be solved in “Troubleshooting”
(P. 13), unplug the power cord and contact your retailer.
2
RM-C2020
LCD
DISPLAY
CHANNEL
VOLUME
MODE
BACK
ZO OM
EC O
ME NU
TV /VI DEO
RE TUR N
+
Cl ear SD
1
3
2
4
6
5
7
9
8
0
OK
O
K
16:9 Zoom
Remote control buttons and functions
CHANNEL
Auto
16:9 Zoom
Full
Regular
14:9 Zoom
Panoramic
Zoom
Panoramic
• Insert the batteries
Use two “AAA/R03” dry
cell batteries. Insert the
batteries from the · end,
making sure the · and
ª polarities are correct.
WARNING:
Batteries shall not be exposed to excessive
heat such as direct sunshine, fire or the like.
RETURN PLUS function
Return to the frequently viewed channel.
Choose the channel you want to programme
To cancel
RETURN function
If you have not set or have canceled the RETURN PLUS
RETURN +
Press and hold
RETURN +
Press and hold
channel, this will return to the previously viewed channel.
Channel selection
Select the desired channel number.
For Hyper Scan
Press and hold
“AAA/R03” Batteries
Turn the volume off/on
Change channel/page
Return Plus
Programmed!
Return Plus
Canceled!
Select TV or Video input
Channel information
PR changes without changing the
picture. Once you stop pressing
CHANNEL+ or CHANNEL - button,
picture will change to the desired PR.
Turn the TV on from standby
Colour button
Turn on “Clear SD”
Change the aspect ratio (P. 8)
V-Scroll
1. Select
Move the picture with
2. Set
5 or ∞ while this bar
is displayed.
Turn on “Cinema Surround”
Turn on “Eco Mode”
To Teletext (P. 12)
Display on-screen menu
Operate the menu
To previous screen
Adjust the volume, Turn off muting
View the Teletext (P. 12)
Favourite channel setting. (P. 11)
1. Register the favourite channel
Set 1-4 ?
Press and hold
Press number
button (1-4 only)
will be displayed.Programmed!
2. Recall the favourite channel
Favourite 1-4 ?
Press
Press number
button (1-4 only)
• If the favourite channel has not been registed
then “No Memory” will be displayed.
3
Set up and connections
TV/VIDEO
MENU/OK
CHANNEL
VOLUME
150 mm 50 mm 150 mm
200 mm
50 mm
VIDEO-2
R
L
V
1
2
Switch between
TV / VIDEO devices
Display on-screen menu / set
Change channel / Page /
Hyper Scan Function (P. 3)
Power lamp
ON : Lit (Blue)
OFF : Unlit
Power lamp lights
while the TV is on.
• “Power Lamp” (P. 11)
Remote control sensor
Volume / Adjust
Power On / Off
To Headphone (P. 5)
Care when setting
■
Power requirements
• Connect the power cord only to a 110-240V, 50/60Hz AC outlet.
■
When attaching the TV to the wall, use the optional JVC wall
mounting unit
• Consult a qualified technician.
• JVC assumes no responsibility for damage due to improper mounting.
• 200 mm x 200 mm mount which conforms to VESA standards.
■
Installation requirements
• To avoid overheating, ensure the unit has ample room.
• To prevent the TV from falling
thread the belt through the hole on
the back of the stand and secure it
to the TV rack.
Screw (not provided)
4
Hole for belt
Belt (not
provided)
Connect an aerial and VCR / DVD Player
AERIAL
OR
VCR (DVD Player)
• After all the connections have been made, insert the plug into an
AC outlet.
Stand Assembly
- Insert the stand into the panel at the position where the screw
holes are, and fasten the screws.
- If you have any problem with assembly, please contact a retailer or
a dealership.
Note: 4 screws included.
Set up and connections (continued)
OUTPUT
VIDEO-2
VIDEO-1
PC
PC AUDIO
HDMI-1
( DVI ANALOG AUDIO )
R
L
V
R
L
R
L
V
Pr
Pb
Y
PC IN
(D-SUB)
R
L
V
JVC
(L) (R)
HDMI-1 HDMI-2
DIGITAL VIDEO/AUDIO
VIDEO-1
R
L
V
Pr
Pb
Y
VIDEO-1
R
L
V
Pr
Pb
Y
JVC
You can connect many different devices to the rear panel of the TV.
Please read the user manuals of each device before setup.
(Connecting cables are not supplied with this TV.)
Headphone
Component input
DVD Player
Game consoles Video camera
PC
Composite input
Game Video
VCR
To VIDEO-2
• Check for PC compatibility.
“PC signals that can be displayed” (P. 14)
VIDEO-1 Watching videos
Output Input
· Composite
signal /
Component
signal (P. 16)
· Sound L / R
· Use Component signal
To “HDMI-1”
To “HDMI-2”
“Video - 1 Setting” (P. 12)
VIDEO-2 Watching videos
Output Input
DVD player
(HDMI compatible)
DVD player
(HDMI compatible)
VCR / DVD recorder
· Composite
signal
· Sound L / R
HDMI-1 Connecting
Amplifier
HDMI-2 HDMI devices
Output Input
· HDMI signal
(P. 16)
· “HDMI Setting” (P. 12)
· HDMI-2 input does not support
analogue audio.
· Connect a “DVI” device to
“HDMI-1” (P. 14)
OUT
- Video and sound signal of a TV
channel you are viewing outputs
from this terminal.
Output
· Composite
Signal
· Sound L/R
5
OK
Initial Settings Registering / Editing channels
OK
OK
OK
O
K
OK
OK
OK
Language
>
English
Castellano
Melayu
Français
ไทย
Tieáng Vieät
Teletext Language
>
Group-1
Group-2
Group-3
Group-4
Group-5
Group-6
Auto Program
>
CH 09
12%
Edit
>
PR ID
01
05
07
08
10
09
06
02
CH 07
CH 76
CH 12
CH 09
CH 02
CH 03
CH/CC
CH 05
CH 02
CH 15
CH 28
04
03
Edit
>
PR ID
01
CH/CC
05
07
08
10
09
06
02
03
CH 07
CH 76
CH 02
CH 03
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
04
Edit
>
PR ID
01
05
07
08
10
09
06
02
04 A BC D E
03 A
CH/CC
CH 07
CH 76
CH 02
CH 03
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
Edit
>
PR ID
01
05
07
08
10
09
06
02
04 A BC D
03 A
CH/CC
CH 07
CH 76
CH 02
CH 03
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
Edit
>
PR ID
01
05
07
08
10
09
06
02
04 A B CD
03 B B C
CH/CC
CH
CH 76
CH 02
CH 03
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
**
Manual
>
PR ID
01
05
07
08
10
09
06
02
CH 07(B/G)
CH 76
CH 12
CH 09
CH 02
CH 03
CH/CC
CH 05
CH 02
CH 15
CH 28
04 A B C D
03 B B C
OK
OK
OK
Edit
>
PR ID
01
CH/CC
05
07
08
10
09
06
02
03
CH 07
CH 76
CH 02
CH 03
CH 12
CH 09
CH 05
CH 02
CH 15
CH 28
04
Turn on the TV
1
JVC logo appears
Select a language
2
Select the teletext language group
3
• Show only when powering on
for the first time.
• The power on the unit can
also be used.
1. Select
2. Set
Select
You can edit the channel list or register new channel manually.
Select a channel
Move
Move a channel position
1. Start
2. Move Finish
Edit a channel name
ID
(Red)
1. Select the character
2.
Move to the next column
3. Set
• See “Language group for teletext” (P. 14)
Automatically register channels (Auto Program)
4
Check what was registered
5
6
• If you want to edit channel, read
the next column.
Insert/Delete
(Green)
• Delete a channel by press
Manual
Insert / Delete a channel
(Yellow)
button.
Register a new channel
1. Select a
CH/CC
• “CH/CC List” (P. 15)
1. Beginning channel search
(Red)
(Blue)
• Channel fine tunning ➡
(Yellow)
From high
frequencies
(Blue)
/
(Green)
or
From low
frequencies
• If the picture or sound is unnatural ➡ for select a system.
2.
Enter a
number 0-9
button then,
receives the
broadcast
signal.
2. Set
Picture setting
OK
OK
OK
Picture
Picture Mode
Sharp
Colour
Tint
White Balance
Features
Back Light
Bright
Contrast
Picture
>
>
>
Bright
Cool
MENU
1. Display “Picture” menu 2. Select item and setting or adjust
1. Select
1. Select
2. Adjust
• To enter an items menu
1. Select
Picture Mode
Back Light
Contrast
Bright
Sharp
Colour
White Balance
Tint
2. Enter
3. Finish
2. Enter
You can select a preset picture setting according to your favour.
Bright : Hightens contrast and sharpness.
Standard : Standardize picture adjustment.
Soft : Softens contrast and sharpness.
You can change the backlight brightness.
Darker
Brighter
You can change the contrast of the picture.
Lower Higher
You can change the brightness of the picture.
Darker Brighter
You can change the sharpness of the picture.
Softer Sharper
You can change the colour of the picture.
Lighter
Deeper
You can change tint only in NTSC.
Reddish Greenish
You can change the white balance of the picture to better match the type of video being view.
Cool : Bluish white colour.
Warm : Reddish white colour.
Mid : Normal white colour.
7
Picture setting (continued)
Auto
16:9 Zoom
Full
Regular
14:9 Zoom
Panoramic
Zoom
>
>>
>
Panoramic
Clear SD
Colour Management
Picture Management
Colour System
Zoom
Digital VNR
Pull Down
DigiPure
Features
>
>
>
>
>
Off
Off
Off
Off
Off
Off
Finer Picture adjustment
8
Features
Clear SD : For clearly picture (Off / Mode-1 / Mode-2)
When Clear SD set to Mode-1 or Mode-2, then Digital VNR and DigiPure and Picture
Management cannot operate.
Digital VNR : Reduce the amount of noise in original picture. (Off / On)
DigiPure : For natural - looking outlines (Off / On)
Pull Down : For smooth cinema film (Auto / Off / On)
Colour Management : For natural - looking pictures (Off / On)
Picture Management : Fix bright / dark pictures. (Off / On)
Colour System :
When there is no colour, change the colour system. (PAL / SECAM / NTSC 3.58 / NTSC 4.43 / AUTO)
Zoom : Change the aspect ratio.
Panoramic Regular/Slim 14:9 Zoom
16 : 9
4 : 3
14 : 9
• When 720p or 1080i or 1080p signal
is received, “Full” and “Slim” can be
selected.
• In PC mode, “Regular” and “Full” can
be selected.
Sound setting
OK
OK
OK
Sound
Set Up
Video-1 Setting Video
Al Volume
On
Appearance Size-1
Teletext Language
HDMI Setting
PC Setting
Edit / Manual
Language
>
>
>
>
>
>
>
>
Auto Program
Set Up
Stereo / I■II
Cinema Surround Off
Bass
Balance
Treble
Sound
>
>
I II Mono
OK
MENU
MENU
1. Display “Sound” menu. 2. Select item and setting or adjust.
Stereo / I■II
Bass Low tones (Weaker Stronger)
Treble High tones (Weaker Stronger)
Balance Speaker balance (Left Stronger
Cinema Surround
• Prevent the sudden change of sound.
AI Volume 1. Display “Set Up” menu.
Prevent sudden
increase or decrease
of sound when
changing channels.
1. Select
2. Enter
1. Select
2. Adjust
3. Finish
Select the stereo, mono or bilingual language (O : Mono / m : Stereo / I : SUB1 / II : SUB2 / Mono)
Right Stronger)
Ambient sound
High Low Mono Off
2. Select “Al Volume”
1. Select
“Set Up”
2. Enter
1.
Select “AI Volume”
2. Adjust to On/Off
9
Useful functions
OK
Features
Off
Off
Features
>
>
On Timer
>
Off
Off
Off
Child Lock
Auto Shutoff
Favourite Setting
Eco Mode
Sleep Timer
Blue Back
Channel Guard
Power Lamp
OK
OK
OK
OK
O
K
O
K
Features
>
>
PR 02
On Timer 00 : 00
On Timer
>
>
>
9
1
7
2
3
4
5
6
8
0
Sleep Timer
>
Off
0
120
>
>
Set ID No.
>
0 0 0 0
PR ID CH/CC
01
05
07
08
10
09
06
02
CH 07
CH 76
CH 12
CH 02
CH 03
CH 09
CH 05
CH 02
CH 15
CH 28
04 A B C D
03 B B C
Channel Guard
>>
0
O
K
O
K
MENU
1. Display “Features” menu.
1. Select
2. Select item and setting or adjust.
1. Select
2. Adjust
• To enter an items menu
1. Select
On Timer
TV to turn on
automatically from
standby mode at
a set channel
and time.
Sleep Timer
TV to turn off
automatically to
standby mode after
a set time.
Channel Guard
Stop children from
watching specific
channels.
10
2. Enter
3. Finish
2. Enter
1. Select PR channel that you want to watch. 2. Set the On time to your desired period at time.
1. Select PR
channel
2. Set
Note : Press
(Blue)
for reset time setting.
1. Select a time in minutes
2. Set
1. Select “Channel Guard”
2. Select a channel and lock it ( : locked )
1. Select
a number
2. To the next
column
3. Enter
• View a locked channel by use the numerical buttons to enter the channel number. When appears, press “DISPLAY”
button and enter your “ID No.”
1. Select
“On Timer”
2. Select item
Note : When the remaining elapse is one minute,
“Good Night!” appears on the screen.
1. Select a
Lock / Release
channel
3. Set
(Blue)
Useful functions (continued)
Favourite Setting
>
1
2
4
3
PR 01
PR 03
PR 02
Favourite Setting
>
1
2
4
3
PR 01
PR 02
Video-1 Setting Video
Al Volume
On
Appearance Size-1
Teletext Language
HDMI Setting
PC Setting
Edit / Manual
Language
>
>
>
>
Auto Program
Set Up
>
<
>
>
O
K
O
K
OK
MENU
Set Up
Blue Back Display a blue screen and mute the sound when the signal is weak or absent. (On / Off)
Child Lock Disables the side control buttons of the TV. (On / Off)
Auto Shutoff Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (On / Off)
Delete the favourite channel that you registered.
(Blue)
To delete
Favourite Setting
Power Lamp Power lamp lights while the TV is on. (On / Off) (P. 4)
Eco Mode Adjust contrast of light and dark according to the brightness of your room. (Off / Eco-1 / Eco-2)
• Change the on screen menu size.
1. Select
Appearance
Change the on-screen
menu size.
1. Display “Set Up” menu.
1. Select
2. Enter
2. Select “Appearance”
1. Select
2. Adjust to
Size-1 / Size-2
11
Viewing Teletext Watching Video or DVDs
CHANNEL
MENU
Set Up
TV / VI D E O
OK
OK
OK
Auto Program
Set Up
>
>
>
>
>
>
Al Volume On
Appearance Size-1
Edit / Manual
Video - 1 Setting Video
Language
Teletext Language
HDMI Setting
PC Setting
PC Position
Phase
Pixel
PC Setting
>
>
4 HDMI 2
5 PC
1 Video - 1
3 HDMI 1
2 Video - 2
AV Select
0 01
OK
OK
MODE
(Red) (Green) (Yellow) (Blue)
HDMI-1
Size
Audio Analogue
HDMI Setting
>
>
1
HDMI-2
Size
>
1
You can watch the Teletext broadcast channel with Text Functions.
1.
TV mode <--> TEXT mode
2. Select a teletext page by press number button (0-9)
• Move up or down a page by
Bookmark your favourite page.
to bookmark
List Mode
• Recall your favourite page by press the colour button.
Press number button
for enter the number of page
Save
Select the input Source.
• Operate the connected device and play video.
1. Select “Set Up”
2. Select item
1. Select
Note: TV/VIDEO
button select the
video source by
move down or
2. Set
use button 0-5 for
selection.
1. Select
2. Enter
1. Select item
2. Setting or Adjust
Hold
Reveal
Index
Cancel
12
Sub-page
Size
Hold the current page.
• Cancel by press this button again.
Display hidden information.
• Example : answer to a quiz, etc.
Video - 1 Setting
Switch between video and component signal
(Video / Component)
HDMI Setting
Setting for HDMI input
3. set
Size : Normally set to “Auto.” If wrong screen
Double the size of the displayed text.
size appears in 480p (525p), change to
“1” or “2”
Audio : Normally set to “Auto.” If no sound,
change to “Analogue” or “Digital.”
Returns to page “100” or
a previously designated page.
Leave the current page open,
• “Audio” is not available for HDMI - 2
PC Setting
Setting for PC input
1. Select
PC Position
1. Adjust
while you switch to watch TV.
• Useful when running a page search.
Display the number of Sub-page.
• Cancel by press this button again.
2. Enter
PC Position : Adjust screen position.
Phase : Sets the focus of screen.
2. Set
Pixel : Adjusts the horizontal feature of screen.
Troubleshooting
ZOOM
If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.
Severe noise or snow Page
Check the aerial cable and TV connections . P. 4
Check the direction of the aerial. P. 4
Check the aerial or its cable damaged or not. --
Patterns, stripes or noise
Interference caused by devices such as an amplifier, --
personal computer, or a hair drier, Move it away from TV.
Ghosting ( Doubling of images )
Interference occurs caused by signal reflection from mountains --
or building. Try to adjust the aerial’s direction or use another
antenna.
Cannot turn it on
Ensure the power cord is connected to the AC outlet correctly. --
Cannot operate the remote control.
The batteries may be exhausted. Replace with new batteries. --
Ensure that you are operation the remote control at less than
7 meters from the front of your TV.
Remote control stops working
Unplug TV, several minutes later plug it in again. --
Side control buttons do not work
Switch “Child Lock” to “Off”. P. 11
Aspect ratio changed unintentionally
Press “
PC screen alignment is off
Adjust the “PC Position” in “PC Setting” of Set Up menu. P. 12
Blue screen appears on the screen
Switch “Blue Back” to “Off”. P. 11
Strange picture when using an external device
If the top of the image is distorted, check the video signal quality itself. --
If movement appears unnatural when receiving a signal from a DVD
player, etc. with 625p (progressive-scanning), change the
output setting of the external device to 625i (interlace-scanning)
” button to return to your settings.
P. 8
--
Poor picture quality Page
Unnatural colour >> Adjust “Colour” and “Back Light” P. 7
Check “Colour System”. If “Auto” is selected P. 8
select the specific colour system manually.
Noise >> Set to the following functions.
Picture Mode : Standard P. 7
DigiPure : On P. 8
Dull picture >> Set to the following functions.
Picture Mode : Bright P. 7
DigiPure : On P. 8
Poor sound
Adjust the “Bass” and “Treble”. P. 9
If receiving a poor signal in “Stereo/I■II” switch to “Mono”.
Adjust the channel reception using “Manual”. P. 6
For HDMI signal, wrong screen size in 480p (525p).
Switch “Size” in “HDMI Setting” to “1” or “2”. P. 12
For HDMI signal, green and distorted screen
Wait a little for the signal to stabilize when switching the signal format
for an “HDMI” device.
For HDMI signal, No picture / No sound
Use the cable marked with HDMI logo. -Check if the device is compliant with HDMI. P. 12
Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices,
or “Analogue” or “Auto” for DVI devices.
Some functions do not work.
It is not a malfunction. Some functions (dark background) in the menu
do not work depending on the situation.
Black or white dots appear on the screen.
LCD panels use fine dots (“pixels”) to display images. While more than
99.99% of these pixels function properly, a very small number of pixels
may not light, or may light all the time. It is not a malfunction.
No picture, No sound
Some input do not output from OUT terminal. --
P. 9
--
--
--
13
Technical information
No use "Clear SD" Use "Clear SD"
Language group for teletext PC Signals that can be displayed
Group Languages
Group-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese,
Group-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian,
Group-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian, Serbian, Croatian,
Group-4 Arabic, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,
Group-5 Farsi, Czech, Slovak, Hungarian, English, German, French, Italian, Spanish,
Group-6 Lettish, Lithuanian, Estonian, Ukrainian, Czech, Slovak, English, German
Greek, Swedish, Finnish
German, French, Italian, Swedish, Finnish
Slovenian, Czech, Slovak, English, German
Portuguese, Swedish, Finnish
Portuguese, Swedish, Finnish
• If the characters are unreadable. ➡ Select different teletext language
group. (P. 6)
Sound and Colour system in your country or region
Area Country or Region System System
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
Yemen, Indonesia, Malaysia, Singapore,
Thailand, India, etc.
Asia, Middle East
Europe
Oceania Australia, New Zealand, etc. B/G PAL
Africa
China, Vietnam, etc. D/K
Hong Kong, etc. I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G SECAM
Philippines, Taiwan, Myanmar, etc. M NTSC
Russia, etc.
Czech Republic, Poland, etc.
UK, etc. I
Republic of South Africa, etc. I
Nigeria, etc.
Egypt, Morocco, etc. SECAM
14
B/G
D/K
B/G
PAL
SECAM
PALGermany, Holland, Belgium, etc. B/G
PAL
• If the signal doesn’t appear, check that the vertical frequency on the
PC is set to “60Hz”.
Resolution 640 x 480(VGA) / 1024 x 768(XGA)
Vertical frequency (Hz) 60.0
What is “Clear SD”
LCD picture is unstable due to a large number of signal noise. Such noise
appears extensively especially when an LCD displays SD signals. Clear
SD mode resolves disadvantage for better picture quality.
Connect “DVI” devices
Connect a “DVI” device to “HDMI-1” using “DVI-HDMI” conversion cable.
Connect analogue sound output of the DVI device to L and R terminals in
IN HDMI-1.
• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto” (P. 12)
• HDMI-2 input does not support analogue sound (IN HDMI-1).
• HDMI-2 input does not support DVI devices.
CH / CC List
To use the Insert function (P. 6), find the “CH/CC” number corresponding to the TV’s channel number from this table.
US: The US channel numbers are the channel numbers used in the United States, Philippines, etc.
CCIR: The CCIR channel numbers are the channel numbers used in the Middle East, Southeast Asia, etc.
OIRT: The OIRT channel numbers are the channel numbers used in Eastern Europe, Russia, Vietnam, etc.
AUSTRALIA: The AUSTRALIA channel numbers are the channel numbers used in Australia, etc.
CH
CH 02 US-02 E2 R1 AU-0
CH 03 US-03 E3 AU-1
CH 04 US-04 E4 R2 AU-2
CH 05 US-05 E5 R6 AU-6
CH 06 US-06 E6 R7 AU-7
CH 07 US-07 E7 R8 AU-8
CH 08 US-08 E8 R9 AU-9
CH 09 US-09 E9
CH 10 US-10 E10 R10 AU-10
CH 11 US-11 E11 R11 AU-11
CH 12 US-12 E12 R12
CH 13 US-13
CH 14 US-14, W+29
CH 15 US-15, W+30
CH 16 US-16, W+31
CH 17 US-17, W+32
CH 18 US-18, W+33
CH 19 US-19, W+34
CH 20 US-20, W+35
CH 21 US-21, W+36 E21
CH 22 US-22, W+37 E22
CH 23 US-23, W+38 E23
CH 24 US-24, W+39 E24
CH 25 US-25, W+40 E25
CH 26 US-26, W+41 E26
CH 27 US-27, W+42 E27
CH 28 US-28, W+43 E28
CH 29 US-29, W+44 E29
CH 30 US-30, W+45 E30
CH 31 US-31, W+46 E31
CH 32 US-32, W+47 E32
CH 33 US-33, W+48 E33
CH 34 US-34, W+49 E34
CH 35 US-35, W+50 E35
CH 36 US-36, W+51 E36
CH 37 US-37, W+52 E37
CH 38 US-38, W+53 E38
CH 39 US-39, W+54 E39
CH 40 US-40, W+55 E40
CH 41 US-41, W+56 E41
CH 42 US-42, W+57 E42
CH 43 US-43, W+58 E43
CH 44 US-44, W+59 E44
CH 45 US-45, W+60 E45
CH 46 US-46, W+61 E46
CH 47 US-47, W+62 E47
US CCIR OIRT AUSTRALIA
Channel
CH 48 US-48, W+63 E48
CH 49 US-49, W+64 E49
CH 50 US-50, W+65 E50
CH 51 US-51, W+66 E51
CH 52 US-52, W+67 E52
CH 53 US-53, W+68 E53
CH 54 US-54, W+69 E54
CH 55 US-55, W+70 E55
CH 56 US-56, W+71 E56
CH 57 US-57, W+72 E57
CH 58 US-58, W+73 E58
CH 59 US-59, W+74 E59
CH 60 US-60, W+75 E60
CH 61 US-61, W+76 E61
CH 62 US-62, W+77 E62
CH 63 US-63, W+78 E63
CH 64 US-64, W+79 E64
CH 65 US-65, W+80 E65
CH 66 US-66, W+81 E66
CH 67 US-67, W+82 E67
CH 68 US-68, W+83 E68
CH 69 US-69, W+84 E69
CC
CC 01 S-1 AU-5
CC 02 S-2
CC 03 S-3
CC 04 S-4
CC 05 S-5
CC 06 S-6 AU-5A
CC 07 S-7
CC 08 S-8
CC 09 S-9
CC 10 S-10
CC 11 S-11
CC 12 S-12
CC 13 S-13
CC 14 A S-14
CC 15 B S-15
CC 16 C S-16
CC 17 D S-17
CC 18 E S-18
CC 19 F S-19
CC 20 G S-20
CC 21 H S-21
CC 22 I S-22
CC 23 J S-23
US CCIR OIRT AUSTRALIA
Channel
CC 24 K S-24
CC 25 L S-25
CC 26 M S-26
CC 27 N S-27
CC 28 O S-28
CC 29 P S-29
CC 30 Q S-30
CC 31 R S-31
CC 32 S S-32
CC 33 T S-33
CC 34 U S-34
CC 35 V S-35
CC 36 W S-36
CC 37 W+1 S-37
CC 38 W+2 S-38
CC 39 W+3 S-39
CC 40 W+4 S-40
CC 41 W+5 S-41
CC 42 W+6
CC 43 W+7
CC 44 W+8
CC 45 W+9
CC 46 W+10
CC 47 W+11
CC 48 W+12
CC 49 W+13
CC 50 W+14
CC 51 W+15
CC 52 W+16
CC 53 W+17
CC 54 W+18
CC 55 W+19
CC 56 W+20
CC 57 W+21
CC 58 W+22
CC 59 W+23
CC 60 W+24
CC 61 W+25
CC 62 W+26
CC 63 W+27
CC 64 W+28
CC 75 X
CC 76 Y R3
CC 77 Z R4 AU-3
CC 78 Z+1 R5
CC 79 Z+2 AU-4
CC 95 A-5
CC 96 A-4
CC 97 A-3
CC 98 A-2
CC 99 A-1
15
Specification
Main unit Terminals / Connectors
Model LT-32EX18 LT-42EX18
Broadcasting systems B / G / I / D / K / M
Colour systems PAL, SECAM, NTSC 3.58 / NTSC 4.43 MHz
Channels and frequencies VHF low channel (VL) = 46.25 to 140.25 MHz
Sound-multiplex systems NICAM (I / B / G / D / K), A2 (B / G / D / K)
Teletext systems FLOF (Fastext), WST (World Standard System)
Power requirements AC 110 V - 240 V, 50/60Hz
Audio output
(Rated power output)
Speakers (16 cm x 4 cm) x 2 (16 cm x 4 cm) x 2
Power consumption
[standby]
Screen size
(visible area size measured
diagonally)
Dimensions
(W x H x D: mm)
[without stand]
Weights
[without stand]
Accessories Remote control unit : RM-C2020 x 1
VHF high channel (VH) = 147.25 to 423.25 MHz
UHF channel (U) = 431.25 to 863.25 MHz
Receives cable channels in mid band (X to Z+2, S1 to S10),
super band (S11 to S20) and hyper band (S21 to S41).
6 W + 6 W 10 W + 10 W
129 W
[1.3 W]
80 cm 105 cm
791 x 571.7 x 230.5
[791 x 520.5 x 103.9]
12.6 kg
[11.9 kg]
AAA/R03 dry cell battery x 2
Screw x 4
203 W
[1.2 W]
1014 x 698 x 296
[1014 x 646.5 x 108.7]
22 kg
[20 kg]
Terminal name Terminal type Signal type (IN) Signal type (OUT)
Composite video, Analogue
component 576i (625i) / 480i
(525i),
Progressive : 576p (625p) /
480p (525p),
HD : 1080i (1125i), 720p
(750p) / 1080p (1125p)
Audio L / R
HDMI
576i (625i) / 480i (525i)
/ 576p (625p) / 480p (525p),
720p (750p) / 1080p (1125p) /
1080i (1125i)
Audio
Composite video,
Audio L / R
Headphone
output
Input
terminals
Output
terminals
VIDEO-1
VIDEO-2
HDMI-1
HDMI-2
IN HDMI-1
PC INPUT
PC AUDIO
MONITOR OUT RCA connectors x 3
Headphone
RCA connectors x 6
RCA connectors x 3 Composite video, Audio L / R
HDMI connector x 1
HDMI connector x 1
RCA connectors x 2 Audio L / R
D-SUB (15 pins) x 1 Analogue PC signal
PC-IN (3.5 pinjack) x 1
Stereo mini-jack x 1
(3.5 mm in diameter)
• We may change the design and specifications without notice.
© 2008 Victor Company of Japan, Limited 0308WKT-NF-MT
Loading...