JVC LT-26X575/KA, LT-26X585/KA Service Manual

SERVICE MANUAL

LCD FLAT TELEVISION

YA179F20054

BASIC CHASSIS

LT-26X575/KA,

FL

LT-26X585

Supplementary

Please be informed that the LT-26X575/KA and LT-26X585/KA service manual (No.YA179, 2004/8) of contains
some mistakes.

/KA

CORRECTION ITEM

SPECIFICATION (Page 1-2)

Items

Display Pixels Horizontal : 1280 dots × Vertical : 768 dots (W-XGA) Horizontal : 1366 dots × Vertical : 768 dots (W-XGA)

INCORRECT CORRECT

Contents

COPYRIGHT © 2005 Victor Company of Japan, Limited

No.YA179F

2005/4

DISASSEMBLY PROCEDURE (Page 1-10)

INCORRECT

CAUTION AT DISASSEMBLY

• Pay extra attention in the following matter when turning the
power on with the REAR COVER removed.
(1) Prior to disassembly, unplug the power cord from the AC

outlet without fail. (Turn the power "off".)

(2) Make sure that the RECEIVER PWB: IC3102 is

completely covered with black masking tape. (Fig.1)

(3) Make sure to remove the masking of RECEIVER

PWB: IC3102 when attaching the REAR COVER.

(4) Do not turn the power on until the REAR COVER is

attached properly, after the masking is removed.

RECEIVER PWB

Masking tape

Fig.1

SOLDER SIDE

IC3102

IC3101

CORRECT

CAUTION AT DISASSEMBLY

• Pay extra attention in the following matter when turning the
power on with the REAR COVER removed.
(1) Prior to disassembly, unplug the power cord from the AC

outlet without fail. (Turn the power "off".)

(2) Make sure that the RECEIVER PWB: IC3106 is

completely covered with black masking tape. (Fig.1)

(3) Make sure to remove the masking of RECEIVER

PWB: IC3106 when attaching the REAR COVER.

(4) Do not turn the power on until the REAR COVER is

attached properly, after the masking is removed.

PARTS SIDE

RECEIVER PWB

IC3106

Masking tape

Fig.1

1-2 (No.YA179F)