JVC LST0601-001B User Manual
NETWORK VIDEO RECORDER
VR-N1600U
VR-N1600E
STARTUP GUIDE
(A)
OPERATE
REC CONTROL
LIVE/BROWSE
SELECT
PTZ/PRESET
SERIAL
㧝 㧞 㧟
㧡
㧢*1/'
㧥
CANCEL ZOOM OUT ZOOMIN
㧠
㧣
㧤
Please read the following before getting started:
Thank you for purchasing this JVC product.
Before operating this unit, please read the instructions
carefully to ensure the best possible performance.
For Customer Use:
Enter below the Serial No. which is located on the
body.
Retain this information for future reference.
Model No. VR-N1600U
Serial No.
WARNIN G
ALARM
HDD
LOCK
REV FWD
SEARCHFUNCTION ALARM CLEARKEY REC/STOP STOP(PB) PLAY
SKIP
Powered by Milestone
\
LST0601-001B
IMPORTANT SAFEGUARDS
I
SAFETY PRECAUTIONS (for USA)
II
SAFETY PRECAUTIONS (for Europe)
III
IV
SICHERHEITSVORKEHRUNGEN (for Germany)
V
VI
SICHERHEITSVORKEHRUNGEN (for Germany)
VII
1600E
E
E
E
1600E
E
VIII
Getting Started
Features
Automatic detection of network cameras
Reduces the hassle of complex camera registration
procedures.
Built-in large-capacity hard disk (500 GB)
HDD expansion supported
Addition of up to 500 GB (built-in), 2 TB x 2 units (external.)
RAID1 supported
Supports RAID1 if additional built-in HDD is installed.
Writing the same data to two separate hard disks (mirroring)
to enable normal use if one of the hard disks breaks down.
Simultaneous recording up to 16 channels at 160
ips
Simultaneous recording up to 16 channels at 240 ips is
possible when the NVR Viewer is not started up.
In addition, purchasing additional camera licenses enables
the VR-N1600U/E(A) to handle simultaneous recording up to
32 channels.
For details, please consult your nearest JVC dealer.
Display/Distribution performance at 80 ips
(VR-N1600U/E) and 160 ips (VR-N1600U/E(A))
Enables simultaneous recording and playback
Playback of recorded images, jog dial playback and skip
playback are possible while recording is in progress.
Direct Search
Enables you to retrieve data of a specific date/time or alarm
position speedily.
Motion Detect
Enables recording to start automatically when AmotionB is
detected in the preset live image. You can also specify the
detection area for each camera.
Alarm Mail Notification
Enables notification by e-mails to be sent out when an alarm
or motion is detected.
How to Read this Manual
䡵 VR-N1600U/E Documents
There are two documents on this unit.
(1) Startup Guide
This is a booklet that is supplied together with
VR-N1600U/E. It is also available in the PDF file
format. You can find it in the CD-ROM provided.
(2) Instruction Manual (PDF)
This manual is available in the PDF file format. You can
find it in the CD-ROM provided.
䡵 Symbols Used in this Manual
Note Precautions to take during operation of this
unit.
Memo Details for reference, such as functions and
restrictions on uses.
A
䡵 Content of this Manual
● The copyright of this manual belongs to JVC.
Reproduction or copy of this manual, in part or in
whole, without the prior consent of JVC is strictly
prohibited.
● Product names used in this manual are the trademarks
or registered trademarks of the respective companies.
Symbols such as 姠, 姞, 姝 and are omitted in this
manual.
● Milestone and XProtect Enterprise are the registered
trademarks of Milestone Systems, Inc.
● Designs, specifications and other details used in this
manual may be modified for improvement without prior
notice.
Page or item to refer to.
Power failure recovery record
If a power failure occurs during recording, the system
resumes recording in the mode selected before the power
failure after recovery.
Alarm recording
Enables recording to start automatically in the alarm
recording mode when alarm signal input is received during
recording.
2
This STARTUP GUIDE deals only with the initial setup and
basic operational procedures on the VR-N1600U/E.
Besides the STARTUP GUIDE, the VR-N1600U/E
INSTRUCTIONS is also provided on a CD-ROM that
explains further details on the operation procedures.
For details, please refer to the CD-ROM.
Loading...