JVC KY-F560U, KY-F560E service manual

Supporting the transition from analogue to digital, JVC’s versatile, high-performance imaging cam

Display and capture high resolution still or moving pictures with excellent reproduction of detail and colour – where

Thanks to a newly developed Digital Signal Processor,

high definition moving pictures are captured and transferred without

degradation in industrial, broadcast and

medical applications.

MOVING IMAGE

KY-F560

1/2" 3-CCD video camera with optional SDI interface

A multi-purpose camera with analogue composite video and optional SDI (Serial
Digital Interface) video output board. The KY-F560 can be controlled remotely
on a pan & tilt head or integrated with special studio kits for use as a studio
camera. The SDI video signal is a high quality digital signal used extensively in
broadcast and industrial applications.

(IEEE1394 DV)

KY-F550

1/3" 3-CCD video camera with IEEE1394 (DV)

An ultra-compact, yet self-contained, camera that captures high quality
video pictures via its built-in IEEE1394 (DV) interface. Still images for
analysis can also be captured via either the DV interface or the RGB
analogue output.

High resolution SXGA (1360 x 1024 pixels) digital images

are captured with progressive scanning

for high-level image processing and analysis

in industrial and medical applications.

STILL IMAGE

KY-F75

(IEEE1394)

1/2" 3-CCD progressive scan camera with IIDC interface

Captures high resolution SXGA (1360 x 1024) digital images and uses the IIDC v1.3 subset of IEEE1394 for
uncompressed data transmission, at high speed, direct to PC for purposes of image capture and analysis.

KY-F1030

1/2" 1-CCD progressive scan camera with dual IIDC and RGB analogue interfaces

SXGA (1360 x 1024) digital imaging capability is effected by both IIDC (IEEE1394) and RGB analogue outputs,
thus giving extended system flexibility. The KY-F1030 uses the same global standard as KY-F75, namely the
IIDC v1.3 subset of IEEE1394, for uncompressed transmission of data.

KY-F70B

1/2" 3-CCD progressive scan camera with dual SCSI
and RGB analogue interfaces

Provides SXGA (1360 x 1024) images in both digital and analogue
forms for a wide range of applications. Direct interface to PC is via
SCSI-2 for SXGA image capture and analysis.

KY-F560U (NTSC)
KY-F560E (PAL)

1/2" 3-CCD video camera with bayonet mount

PRELIMINARY

Multi-purpose 3-CCD camera featuring 12-bit ADC and 24-bit DSP. A range of accessories allows it to be
integrated into a variety of system configurations for use in industrial, broadcast and medical applications.

Thanks to the newly developed 12-bit ADC and 24-bit DSP, this small
system camera can provide quality images with excellent colour
reproduction and colour separation. Optional expansion accessories
such as the SDI output card and the two Studio Kits allow easy, low-cost
system integration into studio and remote applications.

 1/2" 3-CCD colour accuracy (trichromatic prism)
 1/2" bayonet lens mount
 Latest 12-bit ADC and 24-bit DSP for more than 400% dynamic

range and ideal gamma correction

The latest 12-bit ADCs digitally convert the entire dynamic range of
each CCD without distortion and with the finest possible steps.
Together with a 24-bit, super fast, multi-stream, parallel processing
DSP, highlight handling is dramatically improved and gamma
correction is close to perfect, approaching the colour reproduction and
shadow detail of a full studio camera.

 Horizontal resolution of 850 TVL and S/N of 64dB (NTSC) and

62dB (PAL)

 F13, 2000 lx sensitivity
 Composite output & Gen-Lock input
 JVC protocol (RS-232C, incl. lens controls)
 Compatible with JVC KY-F32 series options
 Can be expanded to include 26-pin connector and SDI

compatibility using optional boards and studio kits

Thanks to open architecture for extended application, digital or
analogue studio application can be done with the KA-F5603 Studio Kit
with SDI interface or the KA-F5602 Studio Kit with analogue video
interface. Both studio camera systems can be complemented by the
optional large viewfinder, intercom and remote control. Additionally, the
KA-F5601 plug-in SDI camera interface can be useful for remote
camera application in conjunction with the remote pan & tilt system.

 Remote camera control via SDI interface possible in

conjunction with Fujinon pan & tilt head and system controller

KY-F560 PTZ System

Camera Head

KY-F560

SDI Card

MD Lens

S16x7.3BMD
S20x6.4MD
(Fujinon)

KA-F5601

Pan/Tilt Unit

CTP-70F-02A

Camera Holder

UTB-219A-02A

Tally Lamp Unit

UTU-427D-01A

KY-F560 Studio Camera System

Camera Cable

UHD-335J-09A

SDI

Pan/Tilt Cable (30m)

UHD-344A-030

RS-485

KY-F560 PTZ
System

Monitor with SDI

System Controller

ESC-103K-04A

P/T Remote Controller

EOP-102J-60B