Possible in conjunction with
KA-F5602/F5603 and RMP210(selectable)
F1.4 /0.5lx
Iris only
F1.4/ 6lx
60dB(NTSC)/58dB(PAL)
Iris/Focus/Zoom
Rear panel
KY-F560
New
Extension slot for SDI output card
(KA-F5601) or Studio adapter
(KA-F5602/F5603)
KY-F32
Delete
D-Sub connector(RGB, Y/C output)
Output signal select switch
MD lens control connector
Page 5
5
Notice when swapping from KY-F32 to KY-F560
Ver1.1
KY-F32
S16x7.3BMD etc
Fujinon/Canon
MD lens
KY-F32
Connect to lens connector
AC adapter
AA-P700
Remote control unit
RM-LP57
Lens remote control unit
RM-713MD
Connect to MD
control connector
Video cable
Remote
cable
KY-F560
S16x7.3BMD etc
Fujinon/Canon
MD lens
Lens extension cable
Fujinon/Canon
Lens controller
Fujinon/Canon
KY-F560
AC adapter
AA-P700
Connect to lens connector
Video cable
Remote
cable
Remote control unit
RM-LP57
Lens remote control unit
RM-713MD
1.When the only camera part of KY-F560 is swapped from KY-F32.
2.When Fujinon CPT-70F-02A PTZ system is not used.
In this case, another lens controller and extension cable is required instead of RM-713MD
Fujinon:RM-D10/D20/D30 and exclusive extension cable
Canon:TCR-101F/201F/301F and exclusive extension cable
Note1:Equivalent to V.RESOLUTION NORMAL:HI-RESO OFF, V.MAX:HI-RESO ON
Page 8
8
KY-F560 16:9 Squeeze mode
16:9 aspect ratio is available for KY-
Ver1.1
F560 selected by menu.(Squeezed
16:9)
Letter box system implemented into
GY-DV5000 is simply masking the
upper and lower part of 4:3 picture
by black signal.
The DSP implemented into KY-F560
allows to convert 4:3 picture to 16:9
ratio electronically.
But, the vertical resolution of
squeezed 16:9 picture deteriorates
compared to the original 4:3 picture.
Removed
Original
Picture
Masked
Stretched
Letter box 16:9
(GY-DV5000)
Recorded image
View on 16:9 monitor
Squeezed 16:9
(KY-F560)
Page 9
9
KY-F560 System Configuration
Ver1.1
Optical Accessories
Fujinon Professional
Zoom Lens
S16x7.3BMD-DSD
PTZ Remote System by FUJINON
PTZ Remote System by FUJINON
AC Power Adapter
AA-P700U/E
Color Video Camera
KY-F560U/E
UTI-422D-01A
Tally Unit
Camera Controls
VC-P893U
RS-232C PC Camera Control
Camera Remote
Control Unit
RM-LP55U
Camera Remote
Control Unit
RM-LP57U
Tally IN
RS-485 cable
UHD-344A-030
CPT-70F-02A
ESC-103K-04A
System controller
PS-470A-01A
AC Adapter
EOP-102J-60B
Operation unit
Control Les, Pan Tilt &Camera
Shut,Gain,Bar,AWB,Power
Page 10
10
Fujinon PTZ Controller
EOP-102J-60B
Ver1.1
Page 11
11
Fujinon PTZ Head with tally lamp
CPT-70F-02A/UTU-427D-01A
Ver1.1
Page 12
12
Fujinon PTZ System Controller
ESC-103K-04A
Ver1.1
Page 13
13
KY-F560 PTZ System Configuration
Ver1.1
Page 14
14
KY-F560 PTZ System Configuration with tally unit
Ver1.1
Page 15
Ver1.1
15
KY-F560 PTZ System Configuration(4 camera control)
Page 16
Ver1.1
16
Genlock
Genlock can be adjusted locally only.
Genlock can be adjusted from controller.
adjustment
smoothly.
Cable clamp
No cable clamp adjustment
Cable clamp adjustment is possible.
ABC
No ABC function.
ABC can be controlled from controller.
controller
Comparison of PTZ system between KY-F560 & AW-E600
Power is supplied via exclusive multi core cable from
AC adapter. The connector of this cable is reliable with
lock mechanism and easy to connect and disconnect.
The style of levers for Zoom, Focus and Pan/Tilt are
different each other and is easy to operate
ergonomically.
Menu cannot be adjusted from remote controller, but it
is possible to set locally without any restriction.
Optional tally is located at the top of PTZ and is large
and visible from every direction regardless of the
position of camera. Tally signal line is included in the
multi core cable and no necessary to connect another
line.
Shutter modes can be selected from controller except
1/100(120) mode.
Power is supplied via simple twist pair cable from AC
adapter. But, this cable looks cheap and is unreliable
without any connector and is recommended to be fixed
by soldering.
The style of levers for Zoom, Focus and Pan/Tilt is
completely identical and easy to misoperate.
Menu cannot be adjusted from remote controller.
Moreover, if remote interface cable is connected, it
also does not work. In order to set menu locally, it is
necessary to provide power from another AC adapter.
It is very incovenient.
Provided tallies are located at the front and back of
PTZ. But, both are too small and may not be visible
when the camera covers it. And, it is required to
connect another lines.
Shutter select items are 1/100(120) and EEL only from
controller.
AW-PH300A
Speed
override
Iris
Scene fileNo scene file on conreoller.4 scene file memories are available on controller.
ATW memory No ATW memory2 ATW memories are available on controller.
Tally
indication on
Manual operation is only possible to adjust the speed
of each levers.
Manual iris can be adjusted by button step by step.Manual Iris can be adjusted by volume variably and
No tally indication on controller.Tally indication can be confirmed on controller.
Speed select switch is useful to control each levers at
lower or higher speed smoothly.
Page 17
17
KY-F560 Options
SDI output Card
KA-F5601U
Ver1.1
Studio adapter
Analogue Component
KA-F5602U
Color Video Camera
KY-F560U/E
Remote Control Unit
RM-P210U/E
Studio adapter
Analogue Component + SDI output
KA-F5603U
Page 18
18
Studio Adapter KA-F5602(Analog)/F5603(Analog +
SDI)
Mount for VF-P400
Ver1.1
Prompter Output
26P Camera Connector
SDI Output
(KA-F5603 only)
Mic Select
Call Button
Incom Level Volume
DC12V Input
Incom Connector
for KA-310
Page 19
19
KY-F560 System Configuration 1
Ver1.1
*When camera control is required
*When camera position is fixed
S16x7.3BMD etc
Fujinon MD lens
Video cable
DV Recorder
BR-DV3000
AC adapter
AA-P700
KY-F560
Lens extension cable ECM-***
Fujinon(max 100m)
BR-DV6000
Remote control unit
RM-LP57
Up to 5m
Note:
When the only camera part of KY-F560 is swapped from KY-F32 and Fujinon CPT-70F-02A PTZ system is
not used, another lens controller and extension cable is required instead of RM-713MD
Fujinon:RM-D10/D20/D30 and exclusive extension cable
Canon:TCR-101F/201F/301F and exclusive extension cable
17“ monitor
TM-H1750CG
Lens controller
RM-D20 etc
Fujinon
ModelDescription
KY-F5603CCD color video camera1
BR-DV6000DV video cassette recorder1
TM-H1750CG17" monitor1
AA-P700AC power adapter1
RM-LP57Camera control unit1
S16×7.3BMD-DSD 16x MD lens1
RM-D20Lens remote controller1
ECM-020MLens extension cable(20m)1
High picture quality generated by KY-F560 can be captured up to 4.5 hours onto DV recorder.
Camera parameter can be adjusted by RM-LP57 camera control unit.
MD lens can be controlled by exclusive lens control unit separately.
Page 20
20
KY-F560 System Configuration 2
Ver1.1
*When camera control is not required
*When camera position is fixed
S16x7.3BMD etc
Fujinon MD lens
Video cable
DV Recorder
BR-DV3000
AC adapter
AA-P700
KY-F560
Lens extension cable ECM-***
Fujinon(max 100m)
Note:
When the only camera part of KY-F560 is swapped from KY-F32 and Fujinon CPT-70F-02A PTZ system is
not used, another lens controller and extension cable is required instead of RM-713MD
Fujinon:RM-D10/D20/D30 and exclusive extension cable
Canon:TCR-101F/201F/301F and exclusive extension cable
BR-DV6000
Lens controller
RM-D20 etc
Fujinon
ModelDescription
KY-F5603CCD color video camera1
BR-DV6000DV video cassette recorder1
TM-H1750CG17" monitor1
AA-P700AC power adapter2
S16×7.3BMD-DSD 16x MD lens1
RM-D20Lens remote controller1
ECM-020MLens extension cable(20m)1
High picture quality generated by KY-F560 can be captured up to 4.5 hours onto DV recorder.
MD lens can be controlled by exclusive lens control unit separately.
Page 21
21
KY-F560 System Configuration 3
Ver1.1
*When precise camera parameter adjustment is
required by remote
*When PTZ system is required
KY-F560
Video cable
UHC-335J-09A
Fujinon camera cable
S16x7.3BMD etc
Fujinon MD lens
CPT-70F-02F
Fujinon PTZ head
UHD-344A-***
Fujinon pan/tilt cable
*Note: Remote connector on UHC-335J-09A is not
connected to KY-F560. Instead, RM-LP57 is connected.
DV Recorder
BR-DV3000
BR-DV6000
Remote control unit
RM-LP57
Up to 5m
17“ monitor
TM-H1750CG
ModelDescription
KY-F5603CCD color video camera1
BR-DV6000DV video cassette recorder1
TM-H1750CG17" monitor1
RM-LP57Camera control unit1
S16×7.3BMD-DSD 16x MD lens1
CPT-70F-02APan/Tild head1
UTB-219A-02ACamera adapter1
UHD-344A-030PTZ cable(30m)1
ESC-103K-04ASystem controller1
EOP-102J-60BPTZ controller1
UHC-335J-09ACamera cable1
ESC-103K-04A
Fujinon system controller
Twist pair cablemore than AWG24
EOP-102J-60B
Fujinon PTZ controller
High picture quality generated by KY-F560 can be captured up to 4.5 hours onto DV recorder.
Camera parameter can be adjusted by RM-LP57 camera control unit
In conjunction with Fujinon PTZ system, 8 presets for lens pan/tilt/focus/zoom positions can be memorized. As a result, this
camera system can be controlled to shoot preset location by remote as fast as possible.
Power supply from PTZ head to camera and power On/Off of the camera are possible.
Page 22
22
KY-F560 System Configuration 4
Ver1.1
*When camera control is required, but precise
camera parameter adjustment is not required by remote
*When PTZ system is required
KY-F560
Video cable
UHC-335J-09A
Fujinon camera cable
S16x7.3BMD etc
Fujinon MD lens
CPT-70F-02F
Fujinon PTZ head
UHD-344A-***
Fujinon pan/tilt cable
DV Recorder
BR-DV3000
BR-DV6000
17“ monitor
TM-H1750CG
ModelDescription
KY-F5603CCD color video camera1
BR-DV6000DV video cassette recorder1
TM-H1750CG17" monitor1
S16×7.3BMD-DSD 16x MD lens1
CPT-70F-02APan/Tild head1
UTB-219A-02ACamera adapter1
UHD-344A-030PTZ cable(30m)1
ESC-103K-04ASystem controller1
EOP-102J-60BPTZ controller1
UHC-335J-09ACamera cable1
ESC-103K-04A
Fujinon system controller
Twist pair cablemore than AWG24
EOP-102J-60B
Fujinon PTZ controller
High picture quality generated by KY-F560 can be captured up to 4.5 hours onto DV recorder.
In conjunction with Fujinon PTZ system, 8 presets for lens pan/tilt/focus/zoom positions can be memorized. As a result, this camera
system can be controlled to shoot preset location by remote as fast as possible.
Power supply from PTZ head to camera and power On/Off of the camera are possible.
Page 23
23
KY-F560 System Configuration 5
Ver1.1
*When precise camera parameter
adjustment is required by remote
S16x7.3BMD etc
Fujinon MD lens
CPT-70F-02F
Fujinon PTZ head
S16x7.3BMD etc
Fujinon MD lens
CPT-70F-02F
Fujinon PTZ head
KY-F560
Video cable
UHC-335J-09A
Fujinon camera
cable
UHD-344A-***
Fujinon pan/tilt cable
KY-F560
Video cable
UHC-335J-09A
Fujinon camera
cable
*Note: Remote connector on UHC-335J-09A is not
connected to KY-F560. Instead, RM-LP57 is connected.
DV Recorder
BR-DV3000
BR-DV6000
Up to 5m
ESC-103K-04A
Fujinon system controller
DV Recorder
BR-DV3000
BR-DV6000
Twist pair cablemore than
AWG24
17“ monitor
TM-H1750CG
Remote control unit
RM-LP57
17“ monitor
TM-H1750CG
ModelDescription
KY-F5603CCD color video camera4
BR-DV6000DV video cassette recorder4
TM-H1750CG17" monitor4
RM-LP57Camera control unit4
S16×7.3BMD-DSD 16x MD lens4
CPT-70F-02APan/Tild head4
UTB-219A-02ACamera adapter4
UHD-344A-030PTZ cable(30m)4
ESC-103K-04ASystem controller4
EOP-102J-60BPTZ controller1
UHC-335J-09ACamera cable4
EOP-102J-60B
Fujinon PTZ
controller
Connectable up
to 4 systems
UHD-344A-***
Fujinon pan/tilt cable
ESC-103K-04A
Fujinon system controller
Up to 5m
Remote control unit
RM-LP57
Twist pair cablemore than AWG24
High picture quality generated by KY-F560 can be captured up to 4.5 hours onto DV recorder.
Camera parameter can be adjusted by RM-LP57 camera control unit
In conjunction with Fujinon PTZ system, up to 4 cameras can be controlled, and 8 presets for lens pan/tilt/focus/zoom positions
for each camera can be memorized. As a result, this camera system can be controlled to shoot preset location by remote quickly.
Power supply from PTZ head to camera and power On/Off of the camera are possible.
Page 24
24
KY-F560 System Configuration 6
Ver1.1
*When camera control is required, but precise
camera parameter adjustment is not required by remote
S16x7.3BMD etc
Fujinon MD lens
CPT-70F-02F
Fujinon PTZ head
S16x7.3BMD etc
Fujinon MD lens
CPT-70F-02F
Fujinon PTZ head
KY-F560
UHC-335J-09A
Fujinon camera
cable
UHD-344A-***
Fujinon pan/tilt cable
KY-F560
Video cable
Video cable
UHC-335J-09A
Fujinon camera
cable
DV Recorder
BR-DV3000
BR-DV6000
ESC-103K-04A
Fujinon system controller
DV Recorder
BR-DV3000
BR-DV6000
Twist pair cablemore than
AWG24
*Note: Remote connector on UHC-335J09A is not connected to KY-F560. Instead,
RM-LP57 is connected.
17“ monitor
TM-H1750CG
EOP-102J-60B
Fujinon PTZ
controller
Connectable up
to 4 systems
17“ monitor
TM-H1750CG
ModelDescription
KY-F5603CCD color video camera4
BR-DV6000DV video cassette recorder4
TM-H1750CG17" monitor4
S16×7.3BMD-DSD 16x MD lens4
CPT-70F-02APan/Tild head4
UTB-219A-02ACamera adapter4
UHD-344A-030PTZ cable(30m)4
ESC-103K-04ASystem controller4
EOP-102J-60BPTZ controller1
UHC-335J-09ACamera cable4
UHD-344A-***
Fujinon pan/tilt cable
ESC-103K-04A
Fujinon system controller
Twist pair cablemore than AWG24
High picture quality generated by KY-F560 can be captured up to 4.5 hours onto DV recorder.
In conjunction with Fujinon PTZ system, up to 4 cameras can be controlled, and 8 presets for lens pan/tilt/focus/zoom positions
for each camera can be memorized. As a result, this camera system can be controlled to shoot preset location by remote quickly.
Power supply from PTZ head to camera and power On/Off of the camera are possible.
KY-F5603CCD color video camera1
KA-F5602Studio adapter1
BR-DV6000DV recorder1
S20x6.4B1220x lens1
HZ-ZS13BZoom/servo unit1
HZ-FM13Focus/manual unit1
VF-P4004" Viewfinder1
RM-P210Camera control unit1
VC-P110Camera cable(10m)1
TM-H1750CG17" monitor1
KA-310Headset2
Tripod1
Dolly1
ECE-R22/VC-PR22 Lens extension cable1
17“ monitor
TM-H1750CG
The combination of KY-F560 with Studio adapter KA-F5602 can be connected to Camera control unit
The camera system can be controlled and the power of camera can be supplied from RM-P210 up to 100m.
This system consists of 4” view finder, focus/manual unit and zoom/servo unit equivalent to full studio camera.
Intercom and tally communications are also possible.
The combination of KY-F560 with Studio adapter KA-F5603 can be connected to Camera control unit
The camera system can be controlled and the power of camera can be supplied from RM-P210 up to 100m.
This system consists of 4” view finder, focus/manual unit and zoom/servo unit equivalent to full studio camera.
Intercom and tally communications are also possible.
Additionally, SDI signal from KA-F5603 is available to connect to in-house master signal source.
DV-LINK (KY-F550 camera control,
live image displaying, live image
recording, snapshot and playback of
the files.)
[ NOTE ]
•One KY-F550 camera can be connected.
•One DVR such as BR-DV3000/6000 or BD-X200 can be
connected.
•Use a camera or a DVR by one format, NTSC only or PAL
only.
IEEE1394
interface/driver and
DV-LINK
Page 39
39
DV-LINK for KY-F550
Ver1.1
KY-F550
Video monitor
Analog
video
DV recorder
Camera control mode
This mode provides Camera control
only. Use this mode when you have a
monitor other than the PC running
DV-LINK. This mode does not
provide the function of image
displaying, Snapshot, nor Recording.
Operations at the Camera control
window are the same as that of
Camera control window of Video
viewer mode.
IEEE1394
PC with IEEE1394
interface/driver and
DV-LINK
[ NOTE ]
•This mode is to control a KY-F550 remotely via IEEE 1394.
Displaying the image from the KY-F550, snapshot or
operating a DVR is not allowed.
•During this mode, connect the video signal from KY-F550 to
a DVR or a monitor by analog signal transmission. The video
signal from KY-F550 should not be connected with a DVR
via IEEE 1394.
Page 40
40
SDK documentation for KY-F550
The SDK(Software Developers’ Kit) is available for the developers who
will integrate KY-F550 into their original system.
The sample application is also provided with this SDK.
SDK user will be not end users of KY-F550 but the developers or the
system integrators who are selling the system with KY-F550.
The users of the sample application will be the same. Therefore, the
purpose of the sample application is to show the example of application of
Ver1.1
the SDK usage. The priority of design is how easy to read source code
rather than how easy to operate application.
The SDK for KY-F550 consists of “Kyf550Ctrl” component and
“KyAviViewer” component and the sample application will be prepared
for every component.
Page 41
41
DV-LINK for KY-F550
Recommended PC performance of using
the graphic card
CPU: Pentium IV 2.4GHz or more
Memory: 256Mbyte or more
HDD:IDE 7200rpm or more
(RAID system is recommended)
OS: Windows 2000/XP
Direct X:Version 9.0 or more
Ver1.1
Software capacity for installation
Windows 2000:9.5M byte
Windows XP:5.5M byte
Recommended graphic cards
NVIDIA: GeForce4MX, GeForceFX chip
mounted AGP graphic card
(GeForce4MX420, GeForce FX5700)
ATI: Radeon 9600SE and 9800
Note:IEEE1394 Driver for DV-LINK should be exclusive in one PC.
Page 42
42
Removable IR Cut Filter
In case of 1CCD camera, light will be
separated to RGB signals by on-chip filter
on the CCD. One pixel consists of R x 1, B x
1, G x 2.
Therefore, this filter cannot be removed
and the sensitivity of R channel is one
fourth.
In case of 3CCD, light will be separated to
Ver1.1
IR Cut Filter
RGB signals by prism and the CCD consists
of monochrome. In order to cut IR(Infra
Red) light, the filter is implemented before
the prism. This is so-called “IR cut filter”.
This “IR cut filter” on the KY-F550 can be
removed and changed to the dummy filter
consisting of transparent glass. As a result,
the sensitivity at the range of IR will be
dramatically increased. This picture is
monochrome.
Page 43
Ver1.1
43
550
Wavelength(nm)
Removable IR Cut Filter
The IR cut filter is built in the lens in some optical equipments and switched.
Therefore, color picture acquisition or high sensitive monochrome
acquisition can be possible with the KY-F550 with the dummy filter
consisting of transparent glass.
Parts number of dummy transparent glass for the KY-F550 is as follows,
SC45530-003(NTSC)Quartz Filter
SC45530-013(PAL)Quartz Filter
Optical Output(3200K)
0.700
0.600
0.500
0.400
0.300
0.200
0.100
0.000
350
400 450
KY-F550 (w/IR cut filter)
500
Wavelength (nm)
Bch Gch
600
650
Rch
700
750
1.000
0.900
0.800
0.700
0.600
0.500
0.400
0.300
0.200
0.100
0.000
350
400 450
Optical Output(3200K)
KY-F550 (w/o IR cut filter)
500
550
Bch Gch Rch
600
650
700
750
Page 44
44
10
11
12
13
14
15
KY-F550 Auto Shading Compensation System
01234567
0
1
2
3
4
5
6
7
8
9
A
B
Ver1.1
Auto shading compensation
system is to compensate the
white shading near the border of
two pictures occurred by
interference automatically.
This system works to adjust the
parameter of shading
automatically to equalize the
APL of area “A” and area”B” in
each RGB channels.
A<B:To increase parameter
A>B:To decrease parameter
A=B:Not to change parameter(based on the same judgment system with AW)
After finishing operation, the message will appear on screen.
OK:Completed
Low light/Over light:Same condition with AW detection
Object:When the deviation between max value and minimum value of APL of each block in
each channel of each A and B area is more than 5%. Or, when it cannot be detected even if
parameter was set to maximum value or minimum value.
Page 45
45
KY-F550 Random Trigger System
Ver1.1
Trigger signal
Charges accumulated in the CCD
Sync non-reset mode (a) (a) (b) (b)
Image output signal
SI output signal
(a)
(a)
(b)
(b)
For verifying the image of an object detected.
If the trigger signal for the object detected is input, charges will be output
following the next SYNC signal while simultaneously, the SI signal will be
output as well, hence allowing the images to be stored in the memory.
The method of SYNC non-reset mode allows camera timing to be output
irrespective of trigger input signal.
Page 46
46
KY-F550 Slow Shutter System
*Slow Shutter 3 FRM setting
Accumulated
CCD charges(a)
Image output signal
WEN output signal
Ver1.1
(a) (a)
To brighten the images taken in dark places etc.
This function is not achieved through the method of increasing gain
electronically. It is accomplished by accumulating charges stored in the
CCD imaging device. In addition, by lengthening the duration for
accumulating charges, more charges could be stored in the CCD and
hence allowing high sensitivity images taken under low light condition.
The maximum accumulation timing is up till 240(NTSC)/200(PAL)
frames.(approx 8 sec)
Note:Please use the manual iris mode. Noise may increase when the number of frames increases, as such, set to an appropriate value.