JVC KW-AV60BT, KW-ADV64BT Instruction Manual

MONITOR WITH DVD RECEIVER

MONITOR CON RECEPTOR DE DVD MONITEUR AVEC RÉCEPTEUR DVD

KW-ADV64BT/KW-AV68BT/ KW-AV60BT/KW-AV60

ENGLISHESPAÑOLFRANÇAIS

For canceling the display demonstration, see page 7. Para cancelar la demonstración en pantalla, consulte la página 7. Pour annuler la démonstration des affichages, référez-vous à la page 7.

For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’INSTRUCTIONS

For customer Use:

Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet. Retain this information for future reference.

Model No. Serial No.

LVT2293-001A

[J/JW]

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best

possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

ENGLISH

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam.

(For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

Caution:

Changes or modifications not approved by JVC could void the user’s authority to operate the equipment.

WARNINGS: (To prevent accidents and damage)

• DO NOT install any unit or wire any cable in a location where; – it may obstruct the steering wheel and gearshift

lever operations.

– it may obstruct the operation of safety devices

such as air bags.

– it may obstruct visibility.

[European Union only]

• DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure

to look around carefully.

• The driver must not watch the monitor while driving.

• The driver must not put on the headphones while driving.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.

JVC KENWOOD Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI, TOKYO, JAPAN

THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.

Location : Bottom

Cautions on the monitor:

• The monitor built in this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective.

• Do not expose the monitor to direct sunlight.

• Do not operate the touch panel using a ball-point pen or similar tool with the sharp tip.

Touch the buttons on the touch panel with your

finger directly (if you are wearing a glove, take it off ).

• When the temperature is very cold or very hot...

Chemical changes occur inside, causing malfunction.

– – Pictures may not appear clearly or may move

slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments.

For safety...

• Do not raise the volume level too much, as this will make driving dangerous by blocking outside sounds, and may cause hearing loss.

• Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

How to reset your unit

• Your preset adjustments will also be erased (except the registered Bluetooth devices).

How to forcibly eject a disc

Press SRC/ and 0 at the same time.

• Be careful not to drop the disc when it ejects.

• If this does not work, reset your unit. (☞ above)

ENGLISH

How to read this manual:

• Illustrations of KW-ADV64BT/KW-AV60BT are mainly used for explanation.

• This manual mainly explains operations using the buttons on the monitor panel and touch panel. For

operations using the remote controller (RM-RK252: supplied only for KW-ADV64BT/KW-AV68BT ), ☞ page 62.

• < > indicates the variable screens/menus/operations/settings that appear on the touch panel.

• [ ] indicates the buttons on the touch panel.

• Indication language: English indications are used for the purpose of explanation. You can select the

indication language from the <Settings> menu. (☞ page 48 )

How to reset your unit ........................................... 3

How to forcibly eject a disc ....................................3

INTRODUCTIONS

ENGLISH

Detaching/attaching the monitor panel ...5

Component names and functions ............6

Initial settings .......................................7

Setting the clock ....................................8

Common operations ...............................9

Turning on the power ........................................... 9

Turning off the power ............................................ 9

Adjusting the volume ...........................................9

Turning off the screen ........................................... 9

Turning on/off the AV source ..............................10

Touch screen operation ........................................ 10

Switching screens ................................11

AV SOURCE OPERATIONS

Selecting the playback source ...............12

Listening to the radio ...........................13

Disc operations.....................................17

Playing a disc....................................................... 17

Playable disc types ..............................................18

Playback operations ............................................19

Settings for disc playback ....................................23

USB operations.....................................24

Playing a USB device ........................................... 24

Listening to the iPod/iPhone device ......26

Preparation .........................................................26

Setting iPod control mode ................................... 27

Selecting preference settings for iPod/iPhone

playback .............................................................. 27

iPod/iPhone playback operations for

<Head> mode .................................................... 28

iPod/iPhone playback operations for

<iPod Out> mode .............................................. 29

Using an App of iPod touch/iPhone ..................... 30

PANDORA® internet radio operations (only for

KW-ADV64BT/KW-AV60BT/KW-AV60) ................. 32

Using other external components ..........34

Front AUX ............................................................34

AV-IN ...................................................................34

Listening to the SiriusXM™ Radio

(only for KW-ADV64BT/KW-AV60BT/

KW-AV60) ......................................35

Activating subscription ........................................ 35

Tuning in to a channel ......................................... 35

Setting the reception restrictions ........................37

Sound adjustment ................................ 39

Using the sound equalization .............................. 39

Adjusting the crossover frequency ....................... 40

Changing display design .......................41

Setting for video playback ....................43

Adjusting the picture ........................................... 43

Changing the aspect ratio ................................... 44

Zooming the picture ............................................ 44

Using a rear view camera ......................45

Setting menu items ..............................46

Memorizing/recalling the settings ..................... 49

Updating the system ...........................................50

Adjusting the touch position .............................. 50

BLUETOOTH OPERATIONS

Information for using Bluetooth®

devices..........................................51

Bluetooth operations for KW-ADV64BT/

KW-AV68BT/KW-AV60BT .................51

Connecting Bluetooth devices .............................52

Using the Bluetooth mobile phone ...................... 54

Using the Bluetooth audio player ........................ 59

Bluetooth device settings .................................... 60

Bluetooth operations for KW-AV60 ........61

Using the Bluetooth mobile phone ..................... 61

Using the Bluetooth audio player .......................61

REFERENCE

Using the remote controller ..................62

Operations using the remote controller

(RM-RK252) ........................................................ 62

Maintenance .......................................65

More about this unit .............................66

Troubleshooting ...................................69

Specifications.......................................74

INTRODUCTIONS

Detaching/attaching the monitor panel

Cautions

• Hold the monitor panel securely so as not to drop it accidentally.

• Fit the monitor panel onto the attaching plate until it is firmly locked.

Turn off the power before detaching the monitor panel. (☞ page 9)

ENGLISH

AttachingDetaching

Soft case (supplied)

Component names and functions

ENGLISH

Screen (touch panel) Monitor panel

1 Loading slot 2 0 (Eject) button

Ejects the disc.

3 MENU/DISP OFF button

• Displays <AV Menu> screen. (Press)

(☞ page 11)

• Turns off/on the screen. (Hold) (☞ page 9)

4 SRC /

button

• Turns off the power. (Hold) (☞ page 9)

• Turns on the power. (☞ page 9)

• Selects the AV source. (Press) (☞ page 12)

Caution on volume setting:

Digital devices (CD/USB/iPod) produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level.

5 VOLUME/ATT knob. (☞ page 9)

• Attenuates the sound. (Press)

• Adjusts the audio volume. (Turn)

6 Remote sensor 7 Reset button

Resets the unit. (☞ page 3 )

8 AUX input jack

(Detach) button

Detaches the monitor panel. (☞ page 5)

You can change the color of the buttons on the monitor panel. (☞ page 41)

Initial settings

When you power on the unit for the first time or reset the unit, the initial setting screen appears.

• You can also change the settings on the <Settings>

screen. (☞ page 46 )

1 For KW-ADV64BT/KW-AV68BT/KW-AV60BT

For KW-AV60

Language Select the text language used

for on-screen information. (☞page 48 )

AV Input Select an external component

to play. (☞page 47 )

Camera Input Select <On> when

connecting the rear view camera. (☞page 48 )

Display Design

Demonstration

Select the background and the colors of the text, touch panel buttons and the monitor panel buttons. (☞page 41)

Activate or deactivate the display demonstration. (☞page 47 )

2 Finish the procedure.

ENGLISH

<AV Menu> screen is displayed.

• <AV Off> is selected initially. Select the

playback source. (☞page 12)

Setting the clock

1 Display <AV Menu> screen.

On the source control screen:

ENGLISH

2 Display <Settings> screen.

4 Set the clock time.

To synchronize the clock time with FM RBDS

To set the clock manually

Select the time display format

Adjust the hour

Adjust the minute

5 Finish the procedure.

Common operations

Turning on the power

Turning off the power

(Hold)

Adjusting the volume

To adjust the volume (00 to 50)

IncreaseDecrease

• On the source control screen, you can also adjust the volume by moving your finger on the touch panel as illustrated.

IncreaseDecrease

Turning off the screen

ENGLISH

(Hold)

The screen is turned off.

• You can also turn off the screen on <AV Menu> screen.

To turn on the screen

Touch the screen to display <AV Menu> screen.

To attenuate the sound

The ATT indicator lights up.

To cancel the attenuation, press the VOLUME/AT T knob.

Turning on/off the AV source

You can activate the AV func tion by selecting source on <AV Menu> screen.

ENGLISH

To turn off the AV source

AV source is turned off.

Touch screen operation

A Displays the video control menu while

playing a video.

B Displays the source control

screen while playing a video.

Goes to the previous chapter/track.*

A Video control menu

B S ource control screen for video playback

Goes to the next

chapter/track.*

• The operation buttons disappear by touching the screen or when no operation is done for about 10 seconds.

* Not available for video from an external component. Dragging your finger to left or right functions in the

same way as touching.

Switching screens

Source control screen

• Pressing MENU on the monitor panel also displays <AV Menu>.

Common operating buttons

[ ] *

[ ]*2*

[

[TP] Activates/deactivates TA standby reception

Displays the screen of App from connected iPod touch/iPhone. (☞ page 30)

• Displays the phone control screen. (Press)

• Switches to the last connected mobile phone. (Hold) (

Displays the sound adjustment screen.

]

(

☞ page 39)

mode. (☞ page 16)

☞ page 53)

ENGLISH

<AV Menu> screen

Displays source control screen/settings screen and changes picture source.

☞ page 12

Select an item to display on the screen.

[AV] Displays the source control screen.

(☞above)

[Camera] Displays the picture from the rear

view camera. (☞page 45)

[Apps]*1Displays the screen of App from

connected iPod touch/iPhone. (☞page 30)

[Off]

Turns off the screen. (

Displays the phone control screen *

☞page 9)

<Settings> screen

Changes the detailed settings. (☞ page 46)

Changes the page

*1 Appears when <Input> setting in <Navigation

Input> screen is set to <iPhone>. (☞ page 30)

Only for KW-ADV64BT/KW-AV68BT/KW-AV60BT.

The icon varies depending on the connection status of

the Bluetooth device (☞ page 51).

• Press [ ] to return to the previous screen.

• Press [

] to display the current source control

screen.

AV SOURCE OPERATIONS

Selecting the playback source

KW-ADV64BT/KW-AV60BT KW-AV60

ENGLISH

KW-AV68BT

• Pressing SRC on the monitor panel repeatedly also selects the playback source.

TUNER

(☞ page 13)

Satellite

*1 (☞ page 35)

DISC

(☞ page 17)

USB

(☞ page 24)

iPod

(☞ page 26)

Pandora

*1 (☞ page 32)

Bluetooth

AV68BT/KW-AV60BT: ☞ page 59/KWAV60: ☞ page 61)

AV-IN

Apps

*2 (KW-ADV64BT/KW-

*3 (☞ page 34)

*4 (☞ page 30)

Switches to the radio broadcast.

Switches to the SiriusXM™ radio broadcast.

Plays a disc.

Plays files on a USB device.

Plays an iPod/iPhone.

Switches to the PANDORA® internet radio broadcast.

• KW-ADV64BT/KW-AV68BT/KW-AV60BT: Plays a Bluetooth audio player.

• KW-AV60: O perates a Bluetooth device.

Switches to an external component connected to LINE IN/VIDEO IN jacks on the rear panel.

Switches to the screen of App from the connected iPod touch/ iPhone.

Front AUX

AV Off

(☞ page 34)

(☞ page 10)

Only for KW-ADV64BT/KW-AV60BT/KW-AV60 . For KW-AV60 : Appears only when <AV Input> is set to <BT>. (☞ page 47) Appears only when <AV Input> is set to <AV-IN>. (☞ page 47) Appears only when <AV Input> is set to <iPod>. (☞ page 47)

Switches to an external component connected to AUX input terminal on the monitor panel.

Turns off the AV source.

Listening to the radio

Preparation: Select the appropriate tuner channel interval for <Area Setting>. (☞ page 15)

DX/LO indicator

Preset no.

Band

☞ page 16

• The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength.

[P1] – [P6] • Tunes in the preset station. (Press)

[TP]* Activates/deactivates TA standby

[3] Displays/hides the information of the

[PTY

* Appears only when FM is selected as the source.

ST/MO indicator

• Presets the currently tuned station. (Hold)

reception mode. (

current station ( Enters FM RBDS program search mode. (

☞ below).

☞ page 16)

Standby reception indicator

☞ page 16)

The station frequency currently tuned in/PS (station name) for FM RBDS when PS signal is coming in

PTY code for FM RBDS

Preset list

[BAND] Selects the band.

[4] [¢] Searches for a station.

• Auto search (Press)

• Manual search (Hold)

] [ ]

[ [Mode] Displays tuner setting screen.

[AV MENU] Displays <AV Menu> screen.

Selects a preset station.

(☞ pages 14 – 15)

Displaying the information of the current station

ENGLISH

Hides the text

information

Text information (only for

Radio Text Plus)

Scrolls the text information

When an FM stereo broadcast is hard to receive...

Activate monaural mode for better reception.

ENGLISH

On Activate monaural mode to improve FM

reception, but the stereo effect will be lost. The MO indicator lights up.

Off Restore the stereo effect.

To tune in FM stations only with strong signals—LO/DX (Local/Distance-extreme)

When the FM reception is interfered...

Auto Increases the tuner selectivity to reduce

interference noises between adjacent stations. (Stereo effect may be lost.)

Wide Subject to the interference from

adjacent stations, but sound quality will not be degraded and the stereo effect will remain.

Local Select this to tune in only to stations

with sufficient signal strength. The LO indicator lights up.

DX Deac tivate the function. The DX

indicator lights up.

Changing the tuner channel interval

Tuner channel interval changes depending on the area you use this unit.

Storing stations in memory

You can preset six stations for each band.

Automatic presetting — SSM (Strongstation Sequential Memory) (For FM only)

ENGLISH

US Select this when using in Nor th/

Central/South America. FM/AM intervals are set to 200 kHz/10 kHz.

Europe Selec t this when using in any other

areas. FM/AM intervals are set to 50 kHz/9 kHz.

SA Select this when using in South

American countries where FM interval is 50 kHz. AM interval is set to 10 kHz.

• Initial setting is <US> for KW-ADV64BT/KWAV60BT/KW-AV60 , and <SA> for KW-AV68BT .

(Hold)

Local stations with the strongest signals are searched and stored automatically.

Manual presetting

1 Tune in to a station you want to preset.

(☞ page 13)

2 Select a preset number.

(Hold)

The station selected in step 1 is stored.

Selecting a preset station

ENGLISH

Also changes preset stations

Activating/deactivating TA Standby Reception

TP indicator

The following features are available only for FM RBDS stations.

Searching for FM RBDS program— PTY Search

You can search for your favorite programs being broadcast by selecting the PTY code for your favorite programs.

2 Select a PTY code.

(Hold)

Changes the page

PTY Search starts. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in.

TP indicator TA Standby Reception

Lights up The unit will temporarily switch

to Traffic Announcement (TA) if available.

Flashes Not yet activated. Tune in to another

station providing the RBDS signals.

Goes off Deactivated.

• The volume adjustment for Traffic Announcement is automatically memorized. The next time the unit switches to Traffic Announcement, the volume is set to the previous level.

Disc operations

Playing a disc

• If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject the disc.

Inserting a disc

Label side

The source changes to “

• The DISC IN ( disc is inserted.

• If “

” appears on the screen, the unit cannot accept the operation you have tried to do. – In some cases, without showing “

operations will not be accepted.

• When playing back a multi-channel encoded disc, the multi-channel signals are downmixed to stereo.

DISC

” and playback starts.

) indicator lights up while a

,”

To eject a disc

• You can eject a disc when playing another AV source.

• If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.

• If the disc cannot be ejected, ☞ page 3 .

When removing a disc, pull it horizontally.

To prohibit disc ejection

Press SRC/ and 0 at the same time.

ENGLISH

To cancel the prohibition, repeat the same procedure to select <Eject OK?>.

Playable disc types

Disc type Recording format, file type, etc. Playable

DVD

• DTS sound cannot be

ENGLISH

reproduced or emitted from

DVD-Video * Region Code:

• For KW-ADV64BT/

this unit.

• For KW-AV68BT: 4

DVD-Audio/DVD-ROM

DVD Recordable/Rewritable (DVD-R/-RW *

, +R/+RW *3)

• DVD Video: UDF bridge

• DVD-VR

/MPEG1/MPEG2/JPEG/

• DivX* MP3/WMA/WAV : ISO 9660 level 1, level 2, Romeo, Joliet

DVD-Video

DVD-VR *

DivX*4 /MPEG1/MPEG2

JPEG

MP3/WMA/WAV

MPEG4/AAC/DVD+VR/DVD-RAM

Dual Disc DVD side

Non-DVD side

CD/VCD Audio CD/CD Text (CD-DA)

VCD (Video CD)

DTS-CD/SVCD (Super Video CD)/CD-ROM/CD-I(CD-I Ready)

CD Recordable/Rewritable (CD-R/-RW)

• ISO 9660 level 1, level 2, Romeo, Joliet

CD-DA

VCD (Video CD)

DivX*

JPEG

MP3/WMA/WAV

MPEG4/AAC

*1 If you insert a DVD Video disc of an incorrect Region Code, “Region Code Error” appears on the screen.

DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not playable.

It is possible to play back finalized +R/+RW (Video format only) discs. “DVD” is selected as its disc type when a

+R/+RW disc is loaded. +RW double layer discs are not playable.

Playable only for KW-ADV64BT/KW-AV60BT/KW-AV60 .

This unit cannot play back contents protected with CPRM (Content Protection for Recordable Media).

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

KW-AV60BT/KW-AV60: 1

/MPEG1/MPEG2

Playback operations

• When the operation buttons are not displayed on the screen, touch the area shown on the illustration.

For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2/JPEG

Audio format

Media type

Playback mode (☞page 22)

Playing time

DISC IN indicator

ENGLISH

Video format/

video playback

mode—VIDEO/

VR-PRG (program)/

VR-PLAY (playlist)/

DivX/MPEG/PBC

[7]*

[

] [ ]*

Stops playback. Displays folder/track list. (☞

page 20)

Selects playback mode. (☞ page 22)

[4] [¢]*5• Selects chapter/track.

[

] [ ]*5 *7

[6] Starts/pauses playback.

[Mode]*

To display the Original Program/Playlist screen, ☞page21.

Appears only for DVD/DVD-VR/VCD.

Does not appear for DVD/DVD-VR/VCD.

Does not appear for DVD/DVD-VR/JPEG.

The icon displayed between the buttons varies depending on the type of disc or file.

Search speed varies depending on the type of disc or file.

Does not appear for VCD.

[AV MENU] Displays <AV Menu> screen.

Playback status (3: play / 8: pause / 7: stop)

• DVD Video: Title no./ Chapter no.

• DVD-VR: Program no. (or Playlist no.)/Chapter no.*

• DivX/MPEG1/MPEG2: Folder no./Track no.

• JPEG: Folder no./File no.

• VCD: Track no.

(Press)

• Reverse/forward search.* (Hold)

Selects title (DVD)/program or playlist (DVD-VR)/folder(DivX/ MPEG1/MPEG2/JPEG). *

Changes the settings for disc playback. (☞ page 23)

For CD/MP3/WMA/WAV

Playback mode (☞ page 22)

Audio format

Playing time

DISC IN indicator

Playback status (3: play / 8: pause )

ENGLISH

Media type

While playing, the jacket picture is shown if the file has the tag data including the jacket picture.

[ ]*

Displays folder/track list. (☞below)

[

] [ ]

Selects playback mode. (☞page22)

[6] Starts/pauses playback.

Does not appear for CD.

Search speed varies depending on the type of disc or file.

Selecting folder/track on the list

Changes the page

Plays tracks/files in the folder

Returns to the root folder

Returns to the upper layer

• MP3/WMA/WAV: Folder no./Track no.

• CD: Track no.

Track/file information

• Touching an information bar scrolls the text if not all of the text is shown.

[4] [¢] • Selects track. (Press)

• Reverse/forward search.* (Hold)

] [ ]*1

[ [Mode]*

Selects folder.

Changes the settings for disc playback. (☞ page 23)

[AV MENU] Displays <AV Menu> screen.

Playing Recordable/Rewritable discs

• This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).

• Use only “finalized” discs.

• This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

• Some discs or files may not be played back due to their characteristics or recording conditions.

Video menu operations

You can display the video menu screen while watching the playback pictures on the screen.

• Available items on the screen differ depending on the types of the loaded disc and playback files.

• The operation buttons disappear by touching the screen or when no operation is done for about 10 seconds.

• The screen for MPEG1/MPEG2 differs from the above.

[Zoom] Displays the picture size selecting

screen. (☞ page 44)

[Aspect]

[Adjust] Displays picture adjustment screen.

[

Selects aspect ratio. (☞ page 44)

(☞ page 43)

] Selects the audio type.

• For DVD-VR: Selects the audio channel (ST: stereo, L: left, R: right).

] Selects the subtitle type.

[ ]

[Menu] Displays the disc menu (DVD)/playlist

[Top Menu] Displays the disc menu (DVD)/original

[

• Touching any position other than operation buttons displays the source control screen.

Selects view angle.

(DVD-VR).

program (DVD-VR).

Displays the menu/playlist/original

]

program/scene selecting screen. (☞ below)

Switches to the direct menu selection

]

mode. Touch the target item to select.

• To exit from the menu selecting screen, press [

Using menu/playlist/original program/ scene selecting screen

[5] [∞] [2] [3]

[Enter] Confirms the selection.

[Return] Returns to the menu screen of the

[

• For DivX only

[2] [3] Skips back or forward by about 5

[Return] Returns to the previous screen.

[

Selects an item.

previous layer.

Displays the menu screen of the top

]

layer when several menu screens exist on the disc.

minutes.

Exits from the scene selecting screen.

]

ENGLISH

Only for VCD

ENGLISH

• To deactivate the PBC function, press [7] then the

direct selecting buttons to select a track number.

Selecting playback mode

For DVD/DVD-VR

Direct selecting buttons (☞ below)

[Zoom] Displays the picture size selecting

screen. (☞ page 44)

[Aspect]

[Adjust] Displays picture adjustment screen.

[

[Return] Displays the previous screen or the

[Menu] Displays the disc menu.

[ ]

• To select a track directly

Selects aspect ratio. (☞ page 44)

(☞ page 43)

] Selects the audio channel (ST: stereo,

L: left, R: right).

menu.

Displays/hides the direct selecting buttons. (☞ below)

Selects Repeat playback mode

For VCD (without PBC)/CD/DivX/MPEG1/MPEG2/MP3/ WMA/WAV

Selects Random playback mode*

* You cannot activate the repeat mode and the random

mode at the same time.

• Each time you press the button, the playback mode changes. (The corresponding indicator lights up.) – Available items differ depending on the types of

loaded disc and playback file.

Indicator Playback mode

CHAPTER

TITLE

PROGRAM

SONGS

FOLDER

ALL

Repeats current chapter.

Repeats current title.

Repeats current program (not available for Playlist playback).

Repeats current track.

Repeats all tracks of the current folder.

Randomly plays all tracks of current folder, then tracks of next folders.

Randomly plays all tracks.

Selects Repeat

playback mode*

– To switch between chapter/track entry and title/

folder entry, press [Direct/CLR].

– When you enter a wrong number, press [Direct/

CLR] to delete the last entry.

To cancel, press the button repeatedly until the

indicator disappears.

Settings for disc playback

Disc Setup items Selectable setting/item Initial: Underlined

Menu Language

Audio Language

Subtitle

Down Mix When playing back a multi-channel disc, this setting affects the signals reproduced

For DVD/DVD-VR/DivX

D. (Dynamic) Range Compres. (Compression)

Monitor Type Select the monitor type to watch a wide screen picture on the external monitor.

VCD/CD

For discs except

File Type Select the playback file type when a disc contains different types of files.

video/picture files

For discs containing audio/

Select the initial disc menu language; Initial English (☞ page 67).

Select the initial audio language; Initial English (☞ page 67).

Select the initial subtitle language or erase the subtitle (Off).

• Initial for KW-ADV64BT/KW-AV60BT/KW-AV60 : Off, for KW-AV68BT : English (☞

page 67)

through the FRONT OUT/REAR OUT jacks.

♦ Dolby Surround : Select this to enjoy multi-channel surround audio by

connecting an amplifier compatible with Dolby Surround.

♦ Stereo : Normally select this.

You can change the dynamic range while playing Dolby Digital software.

♦ Off : Select this to enjoy a powerful sound at a low volume

level with its full dynamic range.

♦ On : Select this to reduce the dynamic range a little. ♦ Dialog : Select this to reproduce the movie dialog more clearly.

♦ 16:9

♦ Audio ♦ Still Picture ♦ Video ♦ Audio&Video

• For playable file types, ☞ page 18.

• If the disc contains no files of the selected type, the existing files are played in the following priority: audio, video, then still picture.

♦ 4:3 LB (Letterbox) ♦ 4:3 PS (PanScan)

: Plays back audio files. : Plays back JPEG files. : Plays back DivX/MPEG1/MPEG2 files. : Plays back audio files and DivX/MPEG1/MPEG2 files.

ENGLISH

USB operations

Playing a USB device

• This unit can play JPEG/MPEG1/MPEG2 */MP3/WMA/ WAV files stored in a USB mass storage class device.

ENGLISH

• This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder).

• Make sure all important data has been backed up to avoid losing the data.

* Except for MPEG2 files recorded by JVC Everio

camcorder (extension code <.mod>).

Connecting a USB device

You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit.

• You cannot connect a computer or portable HDD to the USB cable from the rear of the unit.

USB cable from the rear of the unit

The source changes to “

• All tracks in the USB device will be played repeatedly until you change the source.

USB

” and playback starts.

Cautions:

• This unit may not play back files in a USB device properly when using a USB extension cord.

• USB devices equipped with special functions such as data security functions cannot be used with the unit.

• Do not use a USB device with 2 or more partitions.

• Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.

• This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 1 A.

• This unit may not recognize a memory card inserted into the USB card reader.

• Connect only one USB device to the unit at a time. Do not use a USB hub.

• When connecting with a USB cable, use the USB 2.0 cable.

• The maximum number of characters for (when the characters are 1 byte): – Folder names: 50 characters – File names: 50 characters

• Avoid using the USB device if it might effect driving safety.

• Do not pull out and connect the USB device repeatedly while “Now Reading” is shown on the screen.

• Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device.

• Operation and power supply may not work as intended for some USB devices.

• Do not leave a USB device in the car, or expose to direct sunlight or high temperature to avoid deformation or damage to the device.

• When the operation buttons are not displayed on the screen, touch the area shown on the illustration.

• To change settings for video playback, ☞ page 43.

Video format—

MPEG/JPEG

While playing, the jacket picture is shown if the file has the tag data including the jacket picture.

[ ] [

]

] Selects random playback mode. *1 *

[

Playback mode (☞ below)

Audio format

Playing time

Displays folder/track list. (☞ page 20)

Selects repeat playback mode. *

1 *2

• SONGS: Repeats current track.

FOLDER: Repeats all tracks of

• the current folder.

• FOLDER: Randomly plays all tracks of the folder.

ALL: Randomly plays all tracks.

•

Playback status (3: play / 8: pause)

• MP3/WMA/WAV: Folder no./ Track no.

• JPEG: Folder no./File no.

Track/file information (for MP3/ WMA/WAV)

• Touching an information bar scrolls the text if not all of the text is shown.

[

Switches between the internal and

]

external memory source of the connected device (such as mobile phone).

[6] Starts/pauses playback. [4] [¢]*3• Selects track. (Press)

[

] [ ]

• Reverse/forward search.* Selects folder.

[Mode] Changes the settings for <File Type>

and <Monitor Type>. (☞below)

[AV MENU] Displays <AV Menu> screen.

• Available items differ depending on the types of playback file.

*1 To cancel random or repeat mode, press the button repeatedly until the indicator disappears.

You cannot activate the repeat mode and the random mode at the same time.

The icon displayed between the buttons varies depending on the file type.

Search speed varies depending on the file type.

Setting <File Type>

Audio Plays back audio files. Still Picture Plays back JPEG files. Video Plays back MPEG1/MPEG2 files. Audio&Video Plays back audio files and MPEG1/

Setting <Monitor Type>

Select the monitor type to watch a wide screen picture on the external monitor.

16:9 4:3 LB

(Letterbox)

MPEG2 files.

• If the USB device contains no files of the selected type, the existing files are played in the following priority: audio, video, then still picture.

(Hold)

4:3 PS

(PanScan)

ENGLISH

Listening to the iPod/iPhone device

• To use App of iPod touch/iPhone (such as MotionX-GPS Drive), ☞ page 30.

• To listen to PANDORA® internet radio, ☞ page 32.

ENGLISH

Preparation

iPod/iPhone that can be connected to this unit: Made for

– iPod with video (5th Generation) – iPod classic – iPod nano (6th Generation) – iPod nano (5th Generation) – iPod nano (4th Generation) – iPod nano (3rd Generation) – iPod nano (2nd Generation) – iPod nano (1st Generation) – iPod touch (4th Generation) – iPod touch (3rd Generation) – iPod touch (2nd Generation) – iPod touch (1st Generation) – iPhone 4 – iPhone 3GS – iPhone 3G – iPhone

Connecting iPod/iPhone

Connect your iPod/iPhone using the appropriate cable according to your purpose.

• To listen to music: USB 2.0 cable (accessory of the iPod/iPhone)

To iPod/iPhone

Select appropriate input setting for <AV Input> according to the connection method of the iPod/iPhone.

1 Turn off the AV source.

2 Display <Input> setting screen.

Setting <AV Input> for iPod/iPhone playback

On <AV Menu> screen:

USB cable from the

rear of the unit

• To watch video and listen to music: USB Audio and Video cable for iPod/iPhone—KS-U30 (separately purchased) (☞Installation/Connection Manual)

Caution:

• Video is not displayed on the screen if connected with any cable other than KS-U30.

AV-IN Selec t this when the iPod/iPhone is

connected by using USB 2.0 cable (accessory of the iPod/iPhone).

iPod Select this when the iPod/iPhone is

connected by using KS-U30 (separately purchased).

Setting iPod control mode

Select the unit controlling iPod/iPhone playback.

When the source is “

iPod

”...

Selecting preference settings for iPod/iPhone playback

When the source is “

iPod

”...

ENGLISH

Head Controls playback from this unit.

(☞ page 28)

iPod Controls audio/video playback from

the iPod/iPhone.

• Playback information is shown.

iPod Out *

• When using iPod nano (1st Generation) or iPod with video (5th Generation) with <iPod> selected for <iPod Control>, select <iPod> for <AV Input> and connect iPod using KS-U30 (separately purchased). (☞page 26)

* <iPod Out> is available only for the following iPod/

iPhone models: – iPod nano (6th Generation) – iPod touch (4th Generation) – iPod touch (3rd Generation) – iPod touch (2nd Generation) – iPhone 4 – iPhone 3GS – iPhone 3G

Displays the menu and playback screen output from iPod/iPhone. (☞page 29)

• You can control playback from this unit in the same way as on the iPod/iPhone.

Audiobooks Select the speed of audio books.

Artwork Shows/hides the iPod artwork.

Notice:

When operating an iPod/iPhone, some operations may not be performed correctly or as intended. In this case, visit the following JVC web site: <http:// www3.jvckenwood.com/english/car/> (English website only)

For some iPod/iPhone models, the performance may be abnormal or unstable during operation. In this case, disconnect the iPod/iPhone device, then check its condition. If the performance is not improved or slow, reset your iPod/iPhone.

iPod/iPhone playback operations for <Head> mode

• When the operation buttons are not displayed on the screen, touch the area shown on the illustration.

• To change settings for video playback, ☞ page 43.

ENGLISH

• Select “

iPod

” as the source. (☞ page 12)

• Make sure to select <Head> for <iPod Control>. (☞ page 27)

• When you turn on this unit, the iPod/iPhone is charged through the unit.

Track no./Total track number/

iPod control mode

(☞ page 27)

While playing, Artwork (the picture displayed on the screen of iPod/iPhone) is shown if the song contains the Artwork (☞ page 27).

[ ]

Playing time

Displays the Music/Video menu on the iPod/iPhone. (☞ page 29)

[

Selects Repeat playback mode. *

]

• SONGS: Functions the same as “Repeat One.”

[

] Selects Random playback mode. *

• SONGS: Functions the same as “Shuffle Songs.”

ALBUMS: Functions the

•

Playback mode (☞ below)

[6] Starts/pauses playback. [4] [¢]

[Mode] Changes the settings for iPod

[AV MENU] Displays <AV Menu> screen.

• Selects a track/video. *2 (Press)

• Reverse/forward search. (Hold)

playback. (☞ page 27)

same as “Shuffle Albums.”

• To watch the video, select an item on the list of the Video menu. (☞ page 29)

To cancel random and repeat mode, press the button repeatedly until the indicator disappears.

You cannot resume playback for video sources.

Playback status ( 3: play/8: pause)

Song/video information

• Touching an information bar scrolls the text if not all of the text is shown.

Selecting a track/video from menu on the iPod/iPhone

2 Select the menu (Music or Video) (1), a

category (2), then a desired item (3).

• Select the item in the selected layer until a desired track starts playing.

Music menu:

Switches between Music ( ) and Video ( )

iPod/iPhone playback operations for <iPod Out> mode

• Connect the iPod touch/iPhone using KS-U30

(separately purchased). (☞ Installation/Connection Manual)

• Select <iPod> for <AV Input> setting. (☞page 26)

• Make sure to select <iPod Out> for <iPod

Control>. (☞ page 27)

iPod

• Select “

” as the source. (☞ page 12)

Selecting a track from the menu on the iPod/iPhone

ENGLISH

Returns to the top layer

Video menu:

Switches between Music ( ) and Video ( )

• Available categories differ depending on the type of your iPod/iPhone.

* You can switch to the top of the category by pressing

the corresponding tab: Playlist ( Albums (

) or Songs( ).

Returns to the previous layer

Plays all items in the layer

), Artist ( ),

[5] [∞] Selects a category. [Select/6] Confirms the selection.

[iPod Menu] Returns to the previous layer.

Operations during playback

[2] [3] Skips to the previous/next track. [Select/6] Starts/pauses playback.

[iPod Menu] Displays the menu.

Using an App of iPod touch/iPhone

You can use an App of the connected iPod touch/iPhone on this unit.

• You can operate some functions of an App on the touch panel.

Preparation

ENGLISH

• Connect the iPod touch/iPhone using KS-U30 (separately purchased). (☞ Installation/Connection Manual)

• Select <iPod> for <AV Input> setting. (☞page 26)

• For Apps you can use on this unit, visit <http://mobile.jvc.com>.

1 Start App on your iPod touch/iPhone. 2 Select “

• You can also play back the audio/video using iPod/ iPhone itself instead of the unit. – You can operate for basic playback on the touch

Audio

Video

Apps

” as the source.

On <AV Menu> screen:

panel.

• When you use an App of the iPod touch or iPhone, see also page 68 for safety instructions.

Displaying the screen of App while listening to other source

You can switch the display to screen of App (such as MotionX-GPS Drive) from connected iPod touch/iPhone while listening to other source.

Activating input of iPod touch/iPhone to show buttons for switching display

1 Turn off the AV source.

On <AV Menu> screen:

2 Display <Input> setting screen.

• When using MotionX-GPS Drive, operating buttons and information are not shown. You can per form the operations on the touch panel, such as scrolling the map.

+ 197 hidden pages

JVC KW-AV60BT, KW-ADV64BT Instruction Manual

How to reset your unit

How to forcibly eject a disc

Contents

INTRODUCTIONS

Detaching/attaching the monitor panel

Component names and functions

Initial settings

Setting the clock

Common operations

Turning on the power

Turning off the power

Adjusting the volume

Turning off the screen

Turning on/off the AV source

Touch screen operation

Switching screens

AV SOURCE OPERATIONS

Selecting the playback source

Listening to the radio

Disc operations

Playing a disc

Playable disc types

Playback operations

Settings for disc playback

USB operations

Playing a USB device

Listening to the iPod/iPhone device

Preparation

Setting iPod control mode

Selecting preference settings for iPod/iPhone playback

iPod/iPhone playback operations for <Head> mode

iPod/iPhone playback operations for <iPod Out> mode

Using an App of iPod touch/iPhone