Analog output card
KA-F5604U
INSTRUCTIONS
COMP/VBS OUT
This instructions book is made from 100%
recycled paper.
Thank you for purchasing this JVC product.
Before operating this unit, please read the
instructions carefully to ensure the best
possible performance.
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No. KA-F5604U
Serial No.
LWT0272-001A
These Instructions are for KA-F5604U
These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances.
1. Read all of these instructions.
2. Save these instructions for later use.
3. All warnings on the product and in the operating instructions should be adhered to.
4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.
6. Do not use this appliance near water – for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool, etc.
7. Do not place this appliance on an unstable cart, stand, or table. The appliance
may fall, causing serious injury to a child or adult, and serious damage to the
appliance.
Use only with a cart or stand recommended by the manufacturer, or sold with the
appliance.
Wall or shelf mounting should follow the manufacturer’s instructions, and should
use a mounting kit approved by the manufacturer.
An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
S3125A
8. Slots and openings in the cabinet and the back or bottom are provided for
ventilation, and to insure reliable operation of the appliance and to protect it from overheating, these
openings must not be blocked or covered. The openings should never be blocked by placing the
appliance on a bed, sofa, rug, or other similar surface. This appliance should never be placed near or
over a radiator or heat register. This appliance should not be placed in a built-in installation such as a
bookcase unless proper ventilation is provided.
9. This appliance should be operated only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied to your home, consult your dealer or local power
company. For appliance designed to operate from battery power, refer to the operating instructions.
10. For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and power-line surges.
11. Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be
abused by persons walking on it.
12. Follow all warnings and instructions marked on the appliance.
13. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
14. Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the appliance.
15. Do not attempt to service this appliance yourself as opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
16. Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the appliance.
c. If the appliance has been exposed to rain or water.
d. If the appliance does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the appliance to normal operation.
e. If the appliance has been dropped or the cabinet has been damaged.
f. When the appliance exhibits a distinct change in performance – this indicates a need for service.
17. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
18. Upon completion of any service or repairs to this appliance, ask the service technician to perform
routine safety checks to determine that the appliance is in safe operating condition.
2
SAFETY PRECAUTIONS (FOR USA AND CANADA)
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
This unit should be used with 12 V DC only.
CAUTION:
To prevent electric shocks and fire hazards, DO
NOT use any other power source.
NOTE:
The rating plate (serial number plate) is on this unit.
INFORMATION
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
● Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
●
●
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
CHANGES OR MODIFICATIONS NOT APPROVED
BY JVC COULD VOID USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
THIS DEVICE COMPLIES WITH PART 15 OF THE
FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
ATTENTION
RISQUE D’ELECTROCUTION
NE PAS OUVRIR
ATTENTION: POUR EVITER TOUT RISQUE D’ELECTROCUTION
SE REFERER A UN AGENT QUALIFIE EN CAS DE PROBLEME.
AVERTISSEMENT:
POUR EVITER LES RISQUES D’INCENDIE
OU D’ELECTROCUTION, NE PAS
EXPOSER L’APPAREIL A L’HUMIDITE OU
A LA PLUIE.
Cet appareil ne doit être utilisé sur 12 V en
courant continu.
ATTENTION:
Afin d’éviter tout resque d’incendie ou
d’électrocution, ne pas utiliser d’autres
sources d’alimentation électrique.
REMARQUE:
La plaque d’identification (numéro de série) se
trouve sur la partie inférieure de l’appareil.
INFORMATION (FOR CANADA)
RENSEIGNEMENT (POUR CANADA)
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la Class B est
conforme à la norme NMB-003 du Canada.
NE PAS OUVRIR LE BOITER.
AUCUNE PIECE INTERIEURE N’EST
A REGLER PAR L’UTILISATEUR.
Le symbole de l’éclair à l’intérieur d’un triangle
équilatéral est destiné à alerter l’utilisateur sur la
présence d’une “tension dangereuse” non isolée
dans le boîtier du produit. Cette tension est suffisante
pour provoquer l’électrocution de personnes.
Le point d’exclamation à l’intérieur d’un triangle
équilatéral est destiné à alerter l’utilisateur sur la
présence d’opérations d’entretien importantes au
sujet desquelles des renseignements se trouvent
dans le manuel d’instructions.
*Ces symboles ne sont utilisés qu’aux Etats-Unis.
3
SAFETY PRECAUTIONS (FOR EUROPE)
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
This unit should be used with 12 V DC only.
CAUTION:
To prevent electric shocks and fire hazards, do
NOT use any other power source.
Note:
The rating plate (serial number plate) is on this unit.
CAUTION
To prevent electric shock, do not open the cabinet. No user
serviceable parts inside. Refer servicing to qualified service
personnel.
This equipment is in conformity with the provisions and protection requirements of the corresponding European Directives. This equipment is designed for professional video appliances
and can be used in the following environments:
5 Residential (including both of the location type class 1 and 2 found in IEC 1000-2-5)
5 Commercial and light industrial (including, for example, theatres)
5 Urban outdoors (based on the definition of location type class 6 in IEC 1000-2-5)
This apparatus is designed for rack mounting or is used close to other apparatus.
In order to keep the best performance and furthermore for electromagnetic compatibility we
recommend to use cables not exceeding the following lengths:
Port Cable Length
COMP/ VBS OUT Shielded Twist Pair Cable less than 2 m
Caution:
5 Where there are strong electromagnetic waves or magnetism, for example near a radio or
TV transmitter, transformer, motor, etc., the picture may be disturbed.
In such a case, please keep the apparatus away from the sources of the disturbance.
4
Thank you for purchasing the KA-F5604U Analog output card.
䡵 By inserting this card into JVC’s color video camera
KY-F560, either composite video signal, component
video signal(Y/Cb/Cr), RGB signal or Y/C signal is
COMP/VBS OUT
Analog output
terminal
output.
Mounting this card to KY-F560 Camera
KY-F560
KY-F560 power must be switched off before mounting
the card.
1.
Remove two screws Å from the rear of the camera and
Screw Å
Slot cover
take out the slot cover.
KY-F560
Slot
Analog output
terminal
This card
COMP/VBS OUT
Screw Å
2.
Insert this Analog output card into the slot at the rear of
the camera and secure it by screwing back the two
screws Å which were taken out earlier in the above
mentioned step
Notes
Ensure that the Analog output card is inserted
all the way in.
1
.
.
5
Description of Terminals
A
d
)
Analog Output Terminal (D-sub 9PIN,
Female)
5
1
Notes
● Cannot be connected to computer monitor.
● The output signal could be selected using
the “OUTPUT” item under the “SYSTEM”
9
Pin No. RGB output
1 GND
2 GND
3R OUT
4G OUT
5B OUT
6 Composite video OUT
78 GND
9 GND
6
GND
GND
Y OUT
C OUT
Composite video OUT
GND
GND
menu screen on the KY-F560.(☞ page 7)
Y/C output
Connection
[ Connection example ]
When connecting
● Perform this when the devices are off.
● Read the instruction manual of the unit before preforming it.
Y/Cb/Cr output
GND
GND
Cr OUT
Y OUT
Cb OUT
Composite video OUT
GND
GND
Color video camera
KY-F560
COLOR VIDEO CAMERA KY-F560
nalog output car
KA-F5604U
D-sub 9pin (2m
Monitor
Notes
● Please make sure to the cable with outer shield when connecting the D-sub cable.
● The screw section for mounting D-sub cable of this unit is mm specification.
When using inch type D-sub cable, change to the supplied inch type screws.
6
Menu Screen
When KY-F560 camera is mounted on this unit, new menu screens and menu items are
appeared on the screen.
The additional new menu screens and menu items will be explained here.
Please refer to KY-F560 instruction manual for details on menu screen setting.
“SYSTEM” Menu Screen
The following additional items are added to the “SYSTEM” menu screen.
The settings in bold are factory settings.
Item
OUTPUT
From Analog output terminal, besides the composite signal, another type of output video signal could be output. The additional
output signal is selected here.
“Y/Cb/Cr”:Y/Cb/Cr component signal will be output.
“RGB” : RGB component signal will be output will embed-
“Y/C” : YC separate signal will be output.
Function/Variables
ded sync signal.
“DISPLAY” Menu Screen
“DISPLAY” menu will be appeared, but not for this unit.
7
Specifications
KA-F 5604U
Analog Output : Composite video signal
Component signal
(Either Y/Cb/Cr,RGB or YC separate output signal could be selected)
Power supply : Supplied by camera
Power consumption : 9.6 W (Include KY-F560 camera)
Operating temperature range
: -5 °C to 40 °C (Humidity below 80 %)
Dimensions : (W) 22.4 mm x (H) 70.2 mm x (D) 76.5 mm (Exclude protruded part)
Weight : 60 g
Accessories and attachments
: Instruction Manual
Screws (Inch type) x 2
Dimensions ( unit : mm )
76.5
71
53
62
22.4
COMP/VBS OUT
70.2
Analog output card
10.5
9
7.5
Specification and appearance of this unit are subject to change for further improvement
without prior notice.
is a registered trademark owned by Victor Company of Japan, Limited.
is a registered trademark in Japan, the U.S.A., the U.K. and many other countries.
© 2005 Victor Company of Japan, Limited
Printed in Japan
LWT0272-001A
Loading...