JVC HR-J277MS, HR-J271MS User Manual

VIDEO CASSETTE RECORDER

HR-J277MS HR-J271MS

CABLE/ SAT/DVD

VCR

AUDIO

TV/VCR

123

456

DAILY/QTDN.

WEEKLY/HEBDO

VPS/PDC

0000

AUX

STOP

START

DATE

FIN

DEBUT

EXPRESS

PROG

30 SEC

TV PR +

–

TV PR –

STANDBY/ON

COLOUR SYSTEM

VIDEO

AUDIO

REC LINK

REVIEW

INSTRUCTIONS

SP/LP/EP

PAL NTSC

ENGLISH

CONTENTS

SAFETY FIRST 2

Safety Precautions ...................... 2

INSTALLING YOUR NEW RECORDER 3

Basic Connections ..................... 3

INITIAL SETTINGS 4

Video Channel Set ..................... 4

Auto Set Up ............................... 6

On-Screen Displays ................... 8

Select Language ......................... 9

Clock Set ................................. 10

PLAYBACK 11

Basic Playback ..........................11

Playback Features .................... 12

RECORDING 16

Basic Recording ....................... 16

Recording Features .................. 17

B.E.S.T. Picture System ............. 18

TIMER RECORDING 20

Express Timer Programming ..... 20

Automatic Satellite Programme

Recording ................................ 25

SPECIAL FEATURES 26

Remote Control Functions........ 26

EDITING 30

Edit To Or From Another Video

Recorder .................................. 30

Edit From A Camcorder ............ 31

INFORMATION ON MULTI-SYSTEM COMPATIBILITY 32

TUNER SET 34 TROUBLESHOOTING 38 QUESTIONS AND ANSWERS 41 INDEX 42 SPECIFICATIONS 45

LPT0421-001B

2 EN

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR

MOISTURE.

CAUTION

n When you are not using the recorder for a long period of

time, it is recommended that you disconnect the power cord from the mains outlet.

n Dangerous voltage inside. Refer internal servicing to

qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

n Use the conversion plug (not provided in certain areas)

depending on the type of your AC wall outlet.

ATTENTION

1.This recorder can also receive SECAM colour television signals for recording and playback.

2.Recordings made of SECAM television signals produce monochrome pictures if played back on another video recorder of SECAM standard, or do not produce normal colour pictures if played back on another video recorder of PAL standard.

3.SECAM prerecorded cassettes or recordings made with a SECAM video recorder produce monochrome pictures when played back with this recorder.

POWER SYSTEM

This set operates on voltage of AC110 – 240 V` (Rating), AC90 – 260 V` (Operating), 50/60 Hz with automatic switching.

PAL NTSC

n Only cassettes marked "VHS" (or "S-VHS") can be used with

this videorecorder. However, S-VHS recording is not possible with this model.

n HQ VHS is compatible with existing VHS equipment.

IMPORTANT

n Please read the various precautions on this page before

installing or operating the recorder.

n It should be noted that it may be unlawful to re-record

pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating current on and off. " " shows electrical power standby and " " shows ON.

Video tapes recorded with this video recorder in the LP (Long Play) or EP (Extended Play) mode cannot be played back on a single-speed video recorder.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C or incinerate. Replace battery with Panasonic (Matsushita Electric), Sanyo, Sony or Maxell CR2025. Danger of explosion or Risk of fire if the battery is incorrectly replaced.

n Dispose of used battery promptly. n Keep away from children. n Do not disassemble and do not dispose of in fire.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1. DO NOT place the recorder . . .

... in an environment prone to extreme temperatures or

humidity. ... in direct sunlight. ... in a dusty environment. ... in an environment where strong magnetic fields are

generated. ... on a surface that is unstable or subject to vibration.

2. DO NOT block the recorder's ventilation openings.

3. DO NOT place heavy objects on the recorder or remote control.

4. DO NOT place anything which might spill on top of the recorder or remote control.

5. AVOID violent shocks to the recorder during transport.

INSTALLING YOUR NEW RECORDER

It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PER-

Basic

FORMED.

EN 3

Connections

Aerial terminal

RF Cable (provided)

Back of TV

AV-IN terminals

AV Cable (not provided)

Mains Power Cord

TV Aerial Cable

CHECK CONTENTS

Make sure the package contains all of the accessories listed in "Specifications" (Z pg. 43).

SITUATE RECORDER

Place the recorder on a stable, horizontal surface.

CONNECT RECORDER TO TV

The connection method you use depends on the type of TV you have.

RF CONNECTION

●

To Connect To A TV With NO AV Input Terminals . . .

a– Disconnect the TV aerial cable from the TV. b– Connect the TV aerial cable to the ANT. IN jack

on the rear panel of the recorder.

c– Connect the provided RF cable between the RF

OUT jack on the rear panel of the recorder and the TV's aerial terminal.

AV CONNECTION

●

To Connect To A TV With AV Input Terminals . . .

a– Connect the aerial, recorder and TV as per "RF

CONNECTION".

b– Connect an optional AV cable between the

AUDIO OUT and VIDEO OUT connectors on the rear panel of the recorder and the TV's AV-IN terminals .

Mains outlet

Rear View

AUDIO OUT/ VIDEO OUT

Connect the power plug to an AC outlet before installing the lithium battery. Z pg. 5

CONNECT RECORDER TO MAINS

Plug the end of the mains power cord into a mains outlet.

NOTE:

Use the conversion plug (not provided in certain areas) depending on the type of your AC wall outlet.

ATTENTION

If you have finished all the necessary connections, go to "Video Channel Set" on page 4, then perform Auto Set Up on page 6; do NOT press the button on the recorder/remote control to turn on the recorder's power before you start Auto Set Up.

4 EN

STOP/EJECT

Video Channel Set

INITIAL SETTINGS

If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below.

If you have connected the video recorder to your TV via both the provided RF cable and an AV cable (AV connection) – Go to "With AV Connection" on next page.

Video Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

PR +/–

123 456

PR +/–

With RF Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

Hold down STOP/EJECT on the recorder until the display panel shows the following.

SELECT TV SYSTEM

Press PR + or – to set appropriate TV system that matches the system of TV being used (refer to the table

below).

1 : B/G 2 : D/K 3 : I

Major Countries/Areas TV System

New Zealand, Kuwait, U.A.E., Indonesia, Singapore, Thailand, Malaysia, Iran, Saudi Arabia, Egypt, Morocco, Lebanon, Iraq

China, Mongolia, Russia D/K

4 : H

B/G

TEST SIGNAL

The channel on which the screen to the left appear clearly in step 3 is your Video Channel.

To view picture signals from the video recorder, set your TV to the Video Channel.

Hong Kong I

Australia H

EN 5

SET VIDEO CHANNEL

Set your TV to UHF channel 34.

● If the two vertical white bars appear clearly on the

screen as shown in the illustration (Z "TEST SIGNAL" on page 4), press OK and then go to step 4.

● If the two vertical white bars do not appear clearly,

press OK and then PR + or – to set the video recorder to a vacant channel between 28 and 60 which is not occupied by any local station in your area.

(Ex.) If channel 50 is available in your area

Then set your TV to UHF channel 50 and check if the two vertical white bars appear clearly on the screen; if so, go to step 4. If not, re-set the video recorder to another vacant channel and try again.

NOTES:

●

If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●

If you cannot obtain the two vertical white bars clearly with any channel between 28 and 60, consult your JVC dealer.

FINISH VIDEO CHANNEL SET

Press OK.

● If Auto Set Up (Z pg. 6) or Tuner Set (Z pg. 34)

has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

With AV Connection

IMPORTANT:

Before performing the following steps, make sure the recorder's power is off and there is no cassette inserted in the recorder.

ACCESS VIDEO CHANNEL SET MODE

Hold down STOP/EJECT on the recorder until the display panel shows the following.

SET VIDEO CHANNEL

Press OK, then press PR – until the display panel shows the following.

Now the video channel is set to off (– –).

FINISH VIDEO CHANNEL SET

Press OK.

● If Auto Set Up (Z pg. 6) or Tuner Set (Z pg. 34)

To view picture signals from the video recorder, set your TV to its AV mode.

has not previously been performed, the Language Select screen appears and Auto Set Up function takes place automatically.

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Be sure to connect the power plug to an AC outlet first before installing the lithium battery; otherwise, the battery's service life will be drastically shortened.

Installing/Removing the lithium battery

1 Make sure that the power plug is connected to an AC outlet

and turn off the recorder power.

2 Open the battery cover while pressing the release tab as

illustrated.

3 Insert a lithium battery with the plus (+) side up and push it in.

● To remove the lithium battery, press the latch A down-

ward using a pointed non-metallic object, then pull out the lithium battery.

4 Close the battery cover until it clicks in place.

6 EN

Auto Set Up

IMPORTANT

● Don't press any buttons on the recorder or remote that are not directly related to the step you are performing while Auto Set Up is in progress.

● If you perform Auto Set Up successfully during installation, there's no need to separately perform the Language Select, Clock Set or Channel Set procedures, but if adjustments become necessary they can be performed as follows: – To change the selected language Z pg. 9 – To reset or adjust the time Z pg. 10 – To add/delete channels manually Z pg. 35 – To reset the tuner after moving to a different location

Z pg. 34

123 456

INITIAL SETTINGS (cont.)

The Auto Set Up function simplifies installation by guiding you through the procedures of setting the language, clock and tuner channels — simply follow the on-screen menus that appear.

Before starting, make sure of the following:

● The TV aerial cable should be connected to the recorder.

● The recorder's mains power cord should be connected to

a mains outlet. Z pg. 3

● The "Video Channel Set" procedure should be done first and the TV should be set to its AV mode (With AV connection Z pg. 5) or video channel (With RF connection Z pg. 4).

SELECT LANGUAGE

Press PUSH JOG %ﬁ to place the pointer next to your desired language (English, Arabic or Russian), then

press OK or PUSH JOG .

● The Clock Set screen appears.

ﬁ

SET TIME

Press PUSH JOG %ﬁ to set the time, then press OK

or PUSH JOG .

● Press and hold either button to delay or advance the time by 30 minutes.

ﬁ

CLOCK SET

TIME DATE YEAR 0:00 01.01 00

[5/∞] = [MENU] : EXIT

SET DATE

Press PUSH JOG %ﬁ to set the date, then press OK or PUSH JOG .

● Press and hold either button to change the date by 15 days.

ﬁ

Press PUSH JOG %ﬁ to set the year, then press MENU.

SET YEAR

PUSH JOG

EN 7

Major Countries/Areas TV System

Australia, New Zealand, Kuwait, U.A.E., Indonesia, Singapore, Thailand, Malaysia, Iran, Saudi Arabia, Egypt, Morocco, Lebanon, Iraq

China, Mongolia, Russia D/K

Hong Kong I

B/G

PUSH JOG

SELECT TV SYSTEM

Press PUSH JOG %ﬁ to place the pointer next to the appropriate TV system (refer to the table on the left).

START AUTO CHANNEL SET

Press OK or PUSH JOG .

● The Auto Set Up function scans all the channels that

are receivable by your recorder. It then automatically assigns each receivable channels to the PR +/ – buttons. It skips non-receivable channels.

● As Auto Set Up progresses, the " " mark on the screen moves from left to right. (See below.)

ﬁ

DO NOT press any button on the recorder or remote control while Auto Set Up is in progress.

AUTO CH SET

PLEASE WAIT

START FINISH

During Auto Set Up

"PLEASE WAIT" blinks on the screen and "Auto" blinks on the front display panel.

When Auto Set Up is completed, the lowest position number will appear on the front display panel.

TV Screen

NOTES:

●

If you perform Auto Set Up when the aerial cable is not connected properly, "SCAN COMPLETED -NO SIGNAL-" appears on the screen. When this happens, make sure of the aerial connection and press OK; Auto Set Up will take place again.

●

If there is a power cut, or if you press or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the recorder power once and try again.

●

If you want to set the tuner manually such as to add or skip channels, to swap channel positions, or to fine-tune channels,

pg. 35–37.

●

If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. Z "TV System Selection – When you see the picture but the audio can't be heard or sounds unnatural" on page 37.

8 EN

INITIAL SETTINGS (cont.)

You can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF.

On-Screen Displays

Turn on the TV and select the VIDEO channel (or AV mode).

123 456

TURN ON THE RECORDER

Press .

ACCESS MAIN MENU SCREEN

Press MENU.

ACCESS FUNCTION SET SCREEN

Place the pointer next to "FUNCTION SET" by pressing

PUSH JOG %ﬁ, then press OK or PUSH JOG .

ENABLE/DISABLE ON-SCREEN DISPLAY

The default setting is "ON", so if you want on-screen

displays, leave the setting as it is and go to step 5. If you don't want the displays to appear, press PUSH JOG %ﬁ to place the pointer next to "O.S.D." and press OK or PUSH JOG to set to "OFF".

ﬁ

B.E.S.T. ON PICTURE CONTROL AUTO AUTO TIMER OFF O.S.D. ON AUTO SP=LP TIMER OFF

[5/∞] = [MENU] : EXIT

ﬁ

FUNCTION SET

PUSH JOG

RETURN TO NORMAL SCREEN

Press MENU.

NOTES:

●

When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting.

●

During playback, the operation mode indicators may be disturbed depending on the type of tape being used.

The superimposed indication on the TV screen tells you what the recorder is doing.

9 8

PR. 12 ]SP 23 : 59 NTSC 3.58

31. 12. 95

–9 : 59 : 59

2 3

4 5

1– Operation mode indicators 2– Tape speed SP/LP/EP 3– Colour system indicator (Z pg. 32) 4– Tape direction 5– Counter display 6– Tape position indicator (Z pg. 15) 7– Current day/month/year 8– Clock display 9– Channel position number/Aux. indicator (L-1) 10– Cassette loaded mark

Select

EN 9

TURN ON THE RECORDER

Press .

Language

Turn on the TV and select the VIDEO channel (or AV mode).

123 456

PUSH JOG

ACCESS MAIN MENU SCREEN

Press MENU.

ACCESS INITIAL SET SCREEN

Press PUSH JOG %ﬁ to place the pointer next to

"INITIAL SET", then press OK or PUSH JOG .

ﬁ

FUNCTION SET TUNER SET INITIAL SET

[5/∞] = [MENU] : EXIT

ACCESS LANGUAGE SELECT SCREEN

Press PUSH JOG %ﬁ to place the pointer next to "LANGUAGE", then press OK or PUSH JOG .

SELECT LANGUAGE

Place the pointer next to the language of your choice (English, Arabic or Russian) by pressing PUSH JOG

%ﬁ, then press OK or PUSH JOG .

RETURN TO NORMAL SCREEN

Press MENU.

MAIN MENU

ﬁ

10 EN

Clock Set

Turn on the TV and select the VIDEO channel (or AV mode).

123 456

INITIAL SETTINGS (cont.)

TURN THE RECORDER ON

Press .

ACCESS MAIN MENU SCREEN

Press MENU.

ACCESS INITIAL SET SCREEN

Press PUSH JOG %ﬁ to place the pointer next to "INITIAL SET", then press OK or PUSH JOG .

ACCESS CLOCK SET SCREEN

Press PUSH JOG %ﬁ to place the pointer next to "CLOCK SET", then press OK or PUSH JOG . The

Clock Set screen appears.

INITIAL SET

CLOCK SET LANGUAGE

[5/∞] = [MENU] : EXIT

TIME DATE YEAR 0: 00 01 . 01 00

[5/∞] = [MENU] : EXIT

ﬁ

CLOCK SET

PUSH JOG

SET TIME

Press PUSH JOG %ﬁ to set the time, then press OK or PUSH JOG .

● Press and hold either button to delay or advance the time by 30 minutes.

ﬁ

SET DATE

Press PUSH JOG %ﬁ to set the date, then press OK or PUSH JOG .

● Press and hold either button to change the date by 15 days.

ﬁ

SET YEAR

Press PUSH JOG %ﬁ to set the year.

START CLOCK OPERATION

Press MENU.

NOTE:

If the year digits are automatically cleared, it is possible that you have input February 29th in a non-leap year. Input the correct data.

PLAYBACK

PLAY

STOP

PLAY

REW

COLOUR SYSTEM

STOP/EJECT

Basic

EN 11

The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.

Playback

Turn on the TV and select the VIDEO channel (or AV mode).

123 456

LOAD A CASSETTE

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is

point toward the recorder. Don't apply too much pressure when inserting.

● The recorder power comes on automatically and the counter is reset to 0:00:00.

● Select the appropriate colour system by pressing the COLOUR SYSTEM button. (Z pg. 32)

● If the record safety tab has been removed, playback begins automatically. (Z pg. 16)

FIND PROGRAMME START POINT

If the tape is advanced past the start point, press REW. To go forward, press FF.

START PLAYBACK

Press PLAY. "BEST" appears blinking in the recorder's display panel during automatic tracking. (Z pg. 18)

STOP PLAYBACK

Press STOP on the remote or STOP/EJECT on the recorder's front panel. Then press STOP/EJECT to

remove the cassette.

Clean the video heads using a dry cleaning cassette--TCL2UX--when:

• Rough, poor picture appears while a tape is played back.

• The picture is unclear or no picture appears.

• “USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON” (Z pg. 8).

REW

Usable cassettes

● Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

● This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.

12 EN

REW

PAUSE

PLAY

PLAYBACK (cont.)

Variable-Speed Search

Playback Features

PR +/–

123 456

REW

PUSH JOG

PR +/–

PAUSE

ACTIVATE VARIABLE-SPEED SEARCH

During playback, press PUSH JOG or .

● The more times you press, the faster the playback

To resume normal playback, press PLAY.

picture moves.

● To decrease speed, press the button for the opposite direction.

Still Picture/Frame-By-Frame Playback

ﬁ

PAUSE DURING PLAYBACK

Press PAUSE. If there is vertical jitter, use the PR +/ – buttons to correct the picture.

ACTIVATE FRAME-BY-FRAME PLAYBACK

Press PAUSE.

Press PUSH JOG or .

To resume normal playback, press PLAY.

Slow Motion

ACTIVATE SLOW-MOTION PLAYBACK

During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return

to still picture.

During still picture, press and hold PUSH JOG or . Release to return to still picture.

To resume normal playback, press PLAY.

ﬁ

ATTENTION

In the search, still, slow-motion or frame-by-frame playback mode,

● the picture will be distorted.

● the noise bars will appear.

● the picture may not appear.

High-Speed Search

ACTIVATE HIGH-SPEED SEARCH

During playback or still, press FF for forward highspeed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, press and hold FF or REW during playback or still picture. When released, normal playback resumes.

REVIEW

STOP

PLAY

123 456

PR +/–

EN 13

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR +/ – buttons.

OVERRIDE AUTOMATIC TRACKING

Press PR + and – on the recorder to engage manual tracking.

REW

PAUSE

Instant ReView

Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer-recorded programme. If you have several programmes recorded, you can easily access any of them.

NOTE:

Before starting, make sure that the recorder is off and that the Timer mode is disengaged.

ACTIVATE INSTANT REVIEW

Press REVIEW. The recorder power comes on and the recorder searches for the index code indicating the start

of the last timer-recorded programme. Once it's found, playback begins automatically.

● If you have, for example, 3 programmes and you want to watch the first of the 3 programmes, press REVIEW three times. The recorder searches and begins playback automatically. You can access a programme as far as 9 index codes away from the current tape position.

NOTE:

Instant ReView is not possible while the recorder is in the Timer mode.

ADJUST TRACKING MANUALLY

Press PR + or – to adjust tracking.

RETURN TO AUTOMATIC TRACKING

Press PR + and – on the recorder to re-engage automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Repeat Playback

Your video recorder can automatically play back the whole tape 100 times repeatedly.

START PLAYBACK

Press PLAY.

ACTIVATE REPEAT PLAYBACK

Press PLAY and hold for over 5 seconds, then release.

● The Play indicator ( ) on the display panel blinks

slowly.

● The tape plays 100 times automatically, and then stops.

STOP PLAYBACK

Press STOP at any time to stop playback.

NOTE:

Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.

14 EN

PLAY

REW

123 456

PUSH JOG

30 SEC

PLAYBACK (cont.)

Index Search

Your recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

Press PUSH JOG or (™ or £) on the remote control. "™ 1" or "£ 1" is displayed on screen and

search begins in the corresponding direction.

● To access index codes 2 through 9, press PUSH JOG

ﬁ

or repeatedly until the correct index number is displayed. Ex.: To locate the beginning of B from the current

position, press PUSH JOG twice. To locate the beginning of D from the current position, press PUSH JOG once.

● When the specified index code is located, playback begins automatically.

ﬁ

Current position

AB C D E F

–2 –1 1 2 3

Index number

Skip Search

SKIP OVER UNWANTED SECTIONS

Press 30 SEC 1 to 4 times during playback. Each press initiates a 30-second period of fast-motion playback.

Normal playback resumes automatically.

NOTE:

To return to normal playback during a Skip Search, press PLAY.

+ 32 hidden pages